| Current File : /home/mmdealscpanel/yummmdeals.com/modules.d.zip |
PK �5�Z��Q� � ( 90kernel-network-modules/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
installkernel() {
# Include wired net drivers, excluding wireless
local _arch=$(uname -m)
local _net_symbols='eth_type_trans|register_virtio_device|usbnet_open'
local _unwanted_drivers='/(wireless|isdn|uwb|net/ethernet|net/phy|net/team)/'
local _net_drivers
if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then
dracut_instmods -o -P ".*${_unwanted_drivers}.*" -s "$_net_symbols" "=drivers/s390/net"
fi
if [[ $hostonly_mode == 'strict' ]] && [[ -n ${hostonly_nics+x} ]]; then
for _nic in $hostonly_nics; do
_net_drivers=$(get_dev_module /sys/class/net/$_nic)
if ! [[ $_net_drivers ]]; then
derror "--hostonly-nics contains invalid NIC '$_nic'"
continue
fi
hostonly="" instmods $_net_drivers
done
return 0
fi
dracut_instmods -o -P ".*${_unwanted_drivers}.*" -s "$_net_symbols" "=drivers/net"
#instmods() will take care of hostonly
instmods \
=drivers/net/phy \
=drivers/net/team \
=drivers/net/ethernet \
ecb arc4 bridge stp llc ipv6 bonding 8021q ipvlan macvlan af_packet virtio_net xennet
hostonly="" instmods iscsi_ibft crc32c iscsi_boot_sysfs
}
# called by dracut
install() {
return 0
}
PK �5�Z�� �� � 98syslog/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
# do not add this module by default
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
local _i
local _installs
if find_binary rsyslogd >/dev/null; then
_installs="rsyslogd"
inst_libdir_file rsyslog/lmnet.so rsyslog/imklog.so rsyslog/imuxsock.so rsyslog/imjournal.so
elif find_binary syslogd >/dev/null; then
_installs="syslogd"
elif find_binary syslog-ng >/dev/null; then
_installs="syslog-ng"
else
derror "Could not find any syslog binary although the syslogmodule" \
"is selected to be installed. Please check."
fi
if [ -n "$_installs" ]; then
inst_multiple cat $_installs
inst_hook cmdline 90 "$moddir/parse-syslog-opts.sh"
inst_hook cleanup 99 "$moddir/syslog-cleanup.sh"
inst_hook initqueue/online 70 "$moddir/rsyslogd-start.sh"
inst_simple "$moddir/rsyslogd-stop.sh" /sbin/rsyslogd-stop
mkdir -m 0755 -p ${initdir}/etc/templates
inst_simple "${moddir}/rsyslog.conf" /etc/templates/rsyslog.conf
fi
dracut_need_initqueue
}
PK �5�Z��G� � 98syslog/parse-syslog-opts.shnu ȯ�� #!/bin/sh
# Parses the syslog commandline options
#
#Bootparameters:
#syslogserver=ip Where to syslog to
#sysloglevel=level What level has to be logged
#syslogtype=rsyslog|syslog|syslogng
# Don't auto detect syslog but set it
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
detect_syslog() {
syslogtype=""
if [ -e /sbin/rsyslogd ]; then
syslogtype="rsyslogd"
elif [ -e /sbin/syslogd ]; then
syslogtype="syslogd"
elif [ -e /sbin/syslog-ng ]; then
syslogtype="syslog-ng"
else
warn "Could not find any syslog binary although the syslogmodule is selected to be installed. Please check."
fi
echo "$syslogtype"
[ -n "$syslogtype" ]
}
syslogserver=$(getarg syslog.server -d syslog)
syslogfilters=$(getargs syslog.filter -d filter)
syslogtype=$(getarg syslog.type -d syslogtype)
[ -n "$syslogserver" ] && echo $syslogserver > /tmp/syslog.server
[ -n "$syslogfilters" ] && echo "$syslogfilters" > /tmp/syslog.filters
if [ -n "$syslogtype" ]; then
echo "$syslogtype" > /tmp/syslog.type
else
syslogtype=$(detect_syslog)
echo $syslogtype > /tmp/syslog.type
fi
PK �5�ZO��4 4 98syslog/rsyslog.confnu �[��� #rsyslog v3 config file
# if you experience problems, check
# http://www.rsyslog.com/troubleshoot for assistance
#### MODULES ####
$ModLoad imuxsock.so # provides support for local system logging (e.g. via logger command)
$ModLoad imklog.so # provides kernel logging support (previously done by rklogd)
#$ModLoad immark.so # provides --MARK-- message capability
# Provides UDP syslog reception
#$ModLoad imudp.so
#$UDPServerRun 514
# Provides TCP syslog reception
#$ModLoad imtcp.so
#$InputTCPServerRun 514
#### GLOBAL DIRECTIVES ####
# Use default timestamp format
$ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat
# File syncing capability is disabled by default. This feature is usually not required,
# not useful and an extreme performance hit
#$ActionFileEnableSync on
#### RULES ####
PK �5�ZP
�A A 98syslog/READMEnu �[��� Syslog support for dracut
This module provides syslog functionality in the initrd.
This is especially interesting when complex configuration being
used to provide access to the device the rootfs resides on.
When this module is installed into the ramfs it is triggered by
the udev event from the nic being setup (online).
Then if syslog is configured it is started and will forward all
kernel messages to the given syslog server.
The syslog implementation is detected automatically by finding the
appropriate binary with the following order:
rsyslogd
syslogd
syslog-ng
Then if detected the syslog.conf is generated and syslog is started.
Bootparameters:
syslogserver=ip Where to syslog to
sysloglevel=level What level has to be logged
syslogtype=rsyslog|syslog|syslogng
Don't auto detect syslog but set it
PK �5�Z��H� � 98syslog/syslog-cleanup.shnu ȯ�� #!/bin/sh
# Just cleans up a previously started syslogd
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
if [ -f /tmp/syslog.server ]; then
read syslogtype < /tmp/syslog.type
if command -v "${syslogtype}-stop" >/dev/null; then
${syslogtype}-stop
else
warn "syslog-cleanup: Could not find script to stop syslog of type \"$syslogtype\". Syslog will not be stopped."
fi
fiPK �5�Zd�'� � 98syslog/rsyslogd-start.shnu ȯ�� #!/bin/sh
# Triggered by initqueue/online and starts rsyslogd with bootparameters
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
# prevent starting again if already running
if [ -f /var/run/syslogd.pid ]; then
read pid < /var/run/syslogd.pid
kill -0 $pid && exit 0
fi
rsyslog_config() {
local server=$1
shift
local syslog_template=$1
shift
local filters=$*
local filter=
cat $syslog_template
(
# disable shell expansion / globbing
# since filters contain such characters
set -f
for filter in $filters; do
echo "${filter} @${server}"
done
)
#echo "*.* /tmp/syslog"
}
[ -f /tmp/syslog.type ] && read type < /tmp/syslog.type
[ -f /tmp/syslog.server ] && read server < /tmp/syslog.server
[ -f /tmp/syslog.filters ] && read filters < /tmp/syslog.filters
[ -z "$filters" ] && filters="kern.*"
[ -f /tmp/syslog.conf ] && read conf < /tmp/syslog.conf
[ -z "$conf" ] && conf="/etc/rsyslog.conf" && echo "$conf" > /tmp/syslog.conf
if [ $type == "rsyslogd" ]; then
template=/etc/templates/rsyslog.conf
if [ -n "$server" ]; then
rsyslog_config "$server" "$template" "$filters" > $conf
rsyslogd -c3
fi
fi
PK �5�ZѯW� 98syslog/rsyslogd-stop.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
# Kills rsyslogd
if [ -f /var/run/syslogd.pid ]; then
read pid < /var/run/syslogd.pid
kill $pid
kill -0 $pid && kill -9 $pid
else
warn "rsyslogd-stop: Could not find a pid for rsyslogd. Won't kill it."
fi
PK �5�Z�OH�� � 90dm/dm-shutdown.shnu ȯ�� #!/bin/sh
_remove_dm() {
local dev=$1
local s
local devname
for s in /sys/block/${dev}/holders/dm-* ; do
[ -e ${s} ] || continue
_remove_dm ${s##*/}
done
# multipath devices might have MD devices on top,
# which are removed after this script. So do not
# remove those to avoid spurious errors
case $(cat /sys/block/${dev}/dm/uuid) in
mpath-*)
return 0
;;
*)
devname=$(cat /sys/block/${dev}/dm/name)
dmsetup -v --noudevsync remove "$devname" || return $?
;;
esac
return 0
}
_do_dm_shutdown() {
local ret=0
local final=$1
local dev
info "Disassembling device-mapper devices"
for dev in /sys/block/dm-* ; do
[ -e ${dev} ] || continue
if [ "x$final" != "x" ]; then
_remove_dm ${dev##*/} || ret=$?
else
_remove_dm ${dev##*/} >/dev/null 2>&1 || ret=$?
fi
done
if [ "x$final" != "x" ]; then
info "dmsetup ls --tree"
dmsetup ls --tree 2>&1 | vinfo
fi
return $ret
}
if command -v dmsetup >/dev/null &&
[ "x$(dmsetup status)" != "xNo devices found" ]; then
_do_dm_shutdown $1
else
:
fi
PK �5�Z��Ȑf f 90dm/dm-pre-udev.shnu ȯ�� #!/bin/sh
strstr "$(cat /proc/misc)" device-mapper || modprobe dm_mod
modprobe dm_mirror 2>/dev/null
PK �5�Z�pZ�� � # 90dm/59-persistent-storage-dm.rulesnu �[��� SUBSYSTEM!="block", GOTO="dm_end"
ACTION!="add|change", GOTO="dm_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="dm_end"
KERNEL!="dm-[0-9]*", GOTO="dm_end"
ACTION=="add", GOTO="dm_end"
IMPORT{program}="/sbin/dmsetup info -c --nameprefixes --unquoted --rows --noheadings -o name,uuid,suspended,readonly,major,minor,open,tables_loaded,names_using_dev -j%M -m%m"
ENV{DM_NAME}!="?*", GOTO="dm_end"
ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="dm_end"
ENV{DM_UUID}=="CRYPT-TEMP-?*", GOTO="dm_end"
ENV{DM_UUID}!="?*", ENV{DM_NAME}=="temporary-cryptsetup-?*", GOTO="dm_end"
IMPORT BLKID
LABEL="dm_end"
PK �5�Z����� � 90dm/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
require_binaries dmsetup || return 1
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
installkernel() {
instmods =drivers/md dm_mod dm-cache dm-cache-mq dm-cache-cleaner
}
# called by dracut
install() {
modinfo -k $kernel dm_mod >/dev/null 2>&1 && \
inst_hook pre-udev 30 "$moddir/dm-pre-udev.sh"
inst_multiple dmsetup
inst_multiple -o dmeventd
inst_libdir_file "libdevmapper-event.so*"
inst_rules 10-dm.rules 13-dm-disk.rules 95-dm-notify.rules
# Gentoo ebuild for LVM2 prior to 2.02.63-r1 doesn't install above rules
# files, but provides the one below:
inst_rules 64-device-mapper.rules
# debian udev rules
inst_rules 60-persistent-storage-dm.rules 55-dm.rules
inst_rules "$moddir/11-dm.rules"
inst_rules "$moddir/59-persistent-storage-dm.rules"
prepare_udev_rules 59-persistent-storage-dm.rules
inst_hook shutdown 25 "$moddir/dm-shutdown.sh"
}
PK �5�ZӴl�� � 90dm/11-dm.rulesnu �[��� SUBSYSTEM!="block", GOTO="dm_end"
KERNEL!="dm-[0-9]*", GOTO="dm_end"
ACTION!="add|change", GOTO="dm_end"
OPTIONS+="db_persist"
LABEL="dm_end"
PK �5�Zm��>� � 95nvmf/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
require_binaries nvme || return 1
[ -f /etc/nvme/hostnqn ] || return 255
[ -f /etc/nvme/hostid ] || return 255
is_nvmf() {
local _dev=$1
local trtype
[[ -L "/sys/dev/block/$_dev" ]] || return 0
cd -P "/sys/dev/block/$_dev" || return 0
if [ -f partition ] ; then
cd ..
fi
for d in device/nvme* ; do
[ -L "$d" ] || continue
if readlink "$d" | grep -q nvme-fabrics ; then
trtype=$(cat "$d"/transport)
break
fi
done
[[ "$trtype" == "fc" ]] || [[ "$trtype" == "tcp" ]] || [[ "$trtype" == "rdma" ]]
}
[[ $hostonly ]] || [[ $mount_needs ]] && {
pushd . >/dev/null
for_each_host_dev_and_slaves is_nvmf
local _is_nvmf=$?
popd >/dev/null
[[ $_is_nvmf == 0 ]] || return 255
if [ ! -f /sys/class/fc/fc_udev_device/nvme_discovery ] ; then
if [ ! -f /etc/nvme/discovery.conf ] ; then
echo "No discovery arguments present"
return 255
fi
fi
}
return 0
}
# called by dracut
depends() {
echo bash rootfs-block network
return 0
}
# called by dracut
installkernel() {
instmods nvme_fc lpfc qla2xxx
hostonly="" instmods nvme_tcp nvme_fabrics
}
# called by dracut
cmdline() {
local _hostnqn
local _hostid
if [ -f /etc/nvme/hostnqn ] ; then
_hostnqn=$(cat /etc/nvme/hostnqn)
echo -n " nvmf.hostnqn=${_hostnqn}"
fi
if [ -f /etc/nvme/hostid ] ; then
_hostid=$(cat /etc/nvme/hostid)
echo -n " nvmf.hostid=${_hostid}"
fi
echo ""
}
# called by dracut
install() {
if [[ $hostonly_cmdline == "yes" ]]; then
local _nvmf_args=$(cmdline)
[[ "$_nvmf_args" ]] && printf "%s" "$_nvmf_args" >> "${initdir}/etc/cmdline.d/95nvmf-args.conf"
fi
inst_simple "/etc/nvme/hostnqn"
inst_simple "/etc/nvme/hostid"
inst_multiple ip sed
inst_script "${moddir}/nvmf-autoconnect.sh" /sbin/nvmf-autoconnect.sh
inst_multiple nvme
inst_multiple -o \
"$systemdsystemunitdir/nvm*-connect@.service" \
"$systemdsystemunitdir/nvm*-connect.target"
inst_hook cmdline 99 "$moddir/parse-nvmf-boot-connections.sh"
inst_simple "/etc/nvme/discovery.conf"
inst_rules /usr/lib/udev/rules.d/70-nvm*-autoconnect.rules
inst_rules /usr/lib/udev/rules.d/71-nvmf-iopolicy-netapp.rules
dracut_need_initqueue
}
PK �5�Z��� � % 95nvmf/parse-nvmf-boot-connections.shnu ȯ�� #!/bin/sh
#
# Supported formats:
# nvmf.hostnqn=<hostnqn>
# nvmf.hostid=<hostid>
# nvmf.discover=<transport>:<traddr>:<host-traddr>:<trsvcid>
#
# Examples:
# nvmf.hostnqn=nqn.2014-08.org.nvmexpress:uuid:37303738-3034-584d-5137-333230423843
# nvmf.discover=rdma:192.168.1.3::4420
# nvme.discover=tcp:192.168.1.3::4420
# nvme.discover=tcp:192.168.1.3
# nvmf.discover=fc:auto
#
# Note: FC does autodiscovery, so typically there is no need to
# specify any discover parameters for FC.
#
type is_ip >/dev/null 2>&1 || . /lib/net-lib.sh
if getargbool 0 rd.nonvmf ; then
warn "rd.nonvmf=0: skipping nvmf"
return 0
fi
initqueue --onetime modprobe --all -b -q nvme nvme_tcp nvme_core nvme_fabrics
traddr="none"
trtype="none"
hosttraddr="none"
trsvcid=4420
validate_ip_conn() {
if ! getargbool 0 rd.neednet ; then
warn "$trtype transport requires rd.neednet=1"
return 1
fi
local_address=$(ip -o route get to $traddr | sed -n 's/.*src \([0-9a-f.:]*\).*/\1/p')
# confirm we got a local IP address
if ! is_ip "$local_address" ; then
warn "$traddr is an invalid address";
return 1
fi
ifname=$(ip -o route get to $local_address | sed -n 's/.*dev \([^ ]*\).*/\1/p')
if ip l show "$ifname" >/dev/null 2>&1 ; then
warn "invalid network interface $ifname"
return 1
fi
# confirm there's a route to destination
if ip route get "$traddr" >/dev/null 2>&1 ; then
warn "no route to $traddr"
return 1
fi
}
parse_nvmf_discover() {
OLDIFS="$IFS"
IFS=:
set $1
IFS="$OLDIFS"
case $# in
2)
[ -n "$1" ] && trtype=$1
[ -n "$2" ] && traddr=$2
;;
3)
[ -n "$1" ] && trtype=$1
[ -n "$2" ] && traddr=$2
[ -n "$3" ] && hosttraddr=$3
;;
4)
[ -n "$1" ] && trtype=$1
[ -n "$2" ] && traddr=$2
[ -n "$3" ] && hosttraddr=$3
[ -n "$4" ] && trsvcid=$4
;;
*)
warn "Invalid arguments for nvmf.discover=$1"
return 1
;;
esac
if [ "$traddr" = "none" ] ; then
warn "traddr is mandatory for $trtype"
return 1;
fi
if [ "$trtype" = "fc" ] ; then
if [ "$hosttraddr" = "none" ] ; then
warn "host traddr is mandatory for fc"
return 1
fi
elif [ "$trtype" != "rdma" ] && [ "$trtype" != "tcp" ] ; then
warn "unsupported transport $trtype"
return 1
fi
if [ "$trtype" = "tcp" ]; then
validate_ip_conn
fi
echo "--transport=$trtype --traddr=$traddr --host-traddr=$hosttraddr --trsvcid=$trsvcid" >> /etc/nvme/discovery.conf
}
nvmf_hostnqn=$(getarg nvmf.hostnqn=)
if [ -n "$nvmf_hostnqn" ] ; then
echo "$nvmf_hostnqn" > /etc/nvme/hostnqn
fi
nvmf_hostid=$(getarg nvmf.hostid=)
if [ -n "$nvmf_hostid" ] ; then
echo "$nvmf_hostid" > /etc/nvme/hostid
fi
for d in $(getargs nvmf.discover=); do
parse_nvmf_discover "$d"
done
# Host NQN and host id are mandatory for NVMe-oF
[ -f "/etc/nvme/hostnqn" ] || exit 0
[ -f "/etc/nvme/hostid" ] || exit 0
if [ -f "/etc/nvme/discovery.conf" ] ; then
if [ "$trtype" = "tcp" ] ; then
/sbin/initqueue --settled --onetime --unique --name nvme-discover /usr/sbin/nvme connect-all
> /tmp/net.$ifname.did-setup
else
/sbin/initqueue --onetime --unique --name nvme-discover /usr/sbin/nvme connect-all
fi
else
if [ "$trtype" = "tcp" ] ; then
/sbin/initqueue --settled --onetime --unique /usr/sbin/nvme connect-all -t tcp -a $traddr -s $trsvcid
> /tmp/net.$ifname.did-setup
else
/sbin/initqueue --finished --onetime --unique --name nvme-fc-autoconnect /sbin/nvmf-autoconnect.sh
fi
fi
PK �5�Z��o � � 95nvmf/nvmf-autoconnect.shnu �[��� #!/bin/bash
[ -f /sys/class/fc/fc_udev_device/nvme_discovery ] || exit 1
echo add > /sys/class/fc/fc_udev_device/nvme_discovery
exit 0
PK �5�Z<�s�" " 90qemu-net/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
if [[ $hostonly ]] || [[ $mount_needs ]]; then
if type -P systemd-detect-virt >/dev/null 2>&1; then
vm=$(systemd-detect-virt --vm >/dev/null 2>&1)
(($? != 0)) && return 255
[[ $vm = "qemu" ]] && return 0
[[ $vm = "kvm" ]] && return 0
[[ $vm = "bochs" ]] && return 0
fi
for i in /sys/class/dmi/id/*_vendor; do
[[ -f $i ]] || continue
read vendor < $i
[[ "$vendor" == "QEMU" ]] && return 0
[[ "$vendor" == "Bochs" ]] && return 0
done
return 255
fi
return 0
}
# called by dracut
installkernel() {
# qemu specific modules
hostonly='' instmods virtio_net e1000 8139cp pcnet32 e100 ne2k_pci
}
PK �5�Z���`� � 95virtfs/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ "$fs" == "9p" ]] && return 0
done
return 255
}
if type -P systemd-detect-virt >/dev/null 2>&1; then
vm=$(systemd-detect-virt --vm >/dev/null 2>&1)
(($? != 0)) && return 255
[[ $vm = "qemu" ]] && return 0
[[ $vm = "kvm" ]] && return 0
[[ $vm = "bochs" ]] && return 0
fi
for i in /sys/class/dmi/id/*_vendor; do
[[ -f $i ]] || continue
read vendor < $i
[[ "$vendor" == "QEMU" ]] && return 0
[[ "$vendor" == "Bochs" ]] && return 0
done
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
installkernel() {
instmods 9p 9pnet_virtio virtio_pci
}
# called by dracut
install() {
inst_hook cmdline 95 "$moddir/parse-virtfs.sh"
inst_hook mount 99 "$moddir/mount-virtfs.sh"
}
PK �5�Z��Y] ] 95virtfs/parse-virtfs.shnu ȯ�� #!/bin/sh
if [ "${root%%:*}" = "virtfs" ] ; then
modprobe 9pnet_virtio
rootok=1
fi
PK �5�Zb���G G 95virtfs/mount-virtfs.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
filter_rootopts() {
rootopts=$1
# strip ro and rw options
local OLDIFS="$IFS"
IFS=,
set -- $rootopts
IFS="$OLDIFS"
local v
while [ $# -gt 0 ]; do
case $1 in
rw|ro);;
defaults);;
*)
v="$v,${1}";;
esac
shift
done
rootopts=${v#,}
echo $rootopts
}
mount_root() {
local _ret
rootfs="9p"
rflags="trans=virtio,version=9p2000.L"
modprobe 9pnet_virtio
mount -t ${rootfs} -o "$rflags",ro "${root#virtfs:}" "$NEWROOT"
rootopts=
if getargbool 1 rd.fstab -n rd_NO_FSTAB \
&& ! getarg rootflags \
&& [ -f "$NEWROOT/etc/fstab" ] \
&& ! [ -L "$NEWROOT/etc/fstab" ]; then
# if $NEWROOT/etc/fstab contains special mount options for
# the root filesystem,
# remount it with the proper options
rootopts="defaults"
while read dev mp fs opts rest || [ -n "$dev" ]; do
# skip comments
[ "${dev%%#*}" != "$dev" ] && continue
if [ "$mp" = "/" ]; then
rootopts=$opts
break
fi
done < "$NEWROOT/etc/fstab"
rootopts=$(filter_rootopts $rootopts)
fi
# we want rootflags (rflags) to take precedence so prepend rootopts to
# them; rflags is guaranteed to not be empty
rflags="${rootopts:+"${rootopts},"}${rflags}"
umount "$NEWROOT"
info "Remounting ${root#virtfs:} with -o ${rflags}"
mount -t ${rootfs} -o "$rflags" "${root#virtfs:}" "$NEWROOT" 2>&1 | vinfo
[ -f "$NEWROOT"/forcefsck ] && rm -f -- "$NEWROOT"/forcefsck 2>/dev/null
[ -f "$NEWROOT"/.autofsck ] && rm -f -- "$NEWROOT"/.autofsck 2>/dev/null
}
if [ -n "$root" -a -z "${root%%virtfs:*}" ]; then
mount_root
fi
:
PK �5�Z��ZC� � 95resume/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
# No point trying to support resume, if no swap partition exist
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ $fs =~ ^(swap|swsuspend|swsupend)$ ]] && return 0
done
return 255
}
return 0
}
# called by dracut
cmdline() {
local _resume
for dev in "${!host_fs_types[@]}"; do
[[ ${host_fs_types[$dev]} =~ ^(swap|swsuspend|swsupend)$ ]] || continue
_resume=$(shorten_persistent_dev "$(get_persistent_dev "$dev")")
[[ -n ${_resume} ]] && printf " resume=%s" "${_resume}"
done
}
# called by dracut
install() {
local _bin
if [[ $hostonly_cmdline == "yes" ]]; then
local _resumeconf=$(cmdline)
[[ $_resumeconf ]] && printf "%s\n" "$_resumeconf" >> "${initdir}/etc/cmdline.d/95resume.conf"
fi
# if systemd is included and has the hibernate-resume tool, use it and nothing else
if dracut_module_included "systemd" && [[ -x $systemdutildir/systemd-hibernate-resume ]]; then
inst_multiple -o \
$systemdutildir/system-generators/systemd-hibernate-resume-generator \
$systemdsystemunitdir/systemd-hibernate-resume@.service \
$systemdutildir/systemd-hibernate-resume
return 0
fi
# Optional uswsusp support
for _bin in /usr/sbin/resume /usr/lib/suspend/resume /usr/lib/uswsusp/resume
do
[[ -x "${_bin}" ]] && {
inst "${_bin}" /usr/sbin/resume
[[ $hostonly ]] && [[ -f /etc/suspend.conf ]] && inst -H /etc/suspend.conf
break
}
done
if ! dracut_module_included "systemd"; then
inst_hook cmdline 10 "$moddir/parse-resume.sh"
else
inst_script "$moddir/parse-resume.sh" /lib/dracut/parse-resume.sh
fi
inst_script "$moddir/resume.sh" /lib/dracut/resume.sh
}
PK �5�Zk!;1' ' 95resume/parse-resume.shnu ȯ�� #!/bin/sh
if resume=$(getarg resume=) && ! getarg noresume; then
export resume
echo "$resume" >/.resume
else
unset resume
fi
case "$resume" in
LABEL=*) \
resume="$(echo $resume | sed 's,/,\\x2f,g')"
resume="/dev/disk/by-label/${resume#LABEL=}" ;;
UUID=*) \
resume="/dev/disk/by-uuid/${resume#UUID=}" ;;
PARTUUID=*) \
resume="/dev/disk/by-partuuid/${resume#PARTUUID=}" ;;
PARTLABEL=*) \
resume="/dev/disk/by-partlabel/${resume#PARTLABEL=}" ;;
esac
if splash=$(getarg splash=); then
export splash
else
unset splash
fi
case "$splash" in
quiet )
a_splash="-P splash=y"
;;
* )
a_splash="-P splash=n"
;;
esac
if ! getarg noresume; then
if [ -n "$resume" ]; then
wait_for_dev /dev/resume
{
printf "KERNEL==\"%s\", ACTION==\"add|change\", SYMLINK+=\"resume\"\n" \
${resume#/dev/};
printf "SYMLINK==\"%s\", ACTION==\"add|change\", SYMLINK+=\"resume\"\n" \
${resume#/dev/};
} >> /etc/udev/rules.d/99-resume-link.rules
{
if [ -x /usr/sbin/resume ]; then
printf -- 'KERNEL=="%s", ' "${resume#/dev/}"
printf -- '%s' 'ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",'
printf -- " RUN+=\"/sbin/initqueue --finished --unique --name 00resume /usr/sbin/resume %s \'%s\'\"\n" \
"$a_splash" "$resume";
printf -- 'SYMLINK=="%s", ' "${resume#/dev/}"
printf -- '%s' 'ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",'
printf -- " RUN+=\"/sbin/initqueue --finished --unique --name 00resume /usr/sbin/resume %s \'%s\'\"\n" \
"$a_splash" "$resume";
fi
printf -- 'KERNEL=="%s", ' "${resume#/dev/}"
printf -- '%s' 'ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",'
printf -- '%s\n' ' RUN+="/sbin/initqueue --finished --unique --name 00resume echo %M:%m > /sys/power/resume"'
printf -- 'SYMLINK=="%s", ' "${resume#/dev/}"
printf -- '%s' 'ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",'
printf -- '%s\n' ' RUN+="/sbin/initqueue --finished --unique --name 00resume echo %M:%m > /sys/power/resume"'
} >> /etc/udev/rules.d/99-resume.rules
printf '[ -e "%s" ] && { ln -fs "%s" /dev/resume 2> /dev/null; rm -f -- "$job" "%s/initqueue/timeout/resume.sh"; }\n' \
"$resume" "$resume" "$hookdir" >> $hookdir/initqueue/settled/resume.sh
{
printf -- "%s" 'warn "Cancelling resume operation. Device not found.";'
printf -- ' cancel_wait_for_dev /dev/resume; rm -f -- "$job" "%s/initqueue/settled/resume.sh";\n' "$hookdir"
} >> $hookdir/initqueue/timeout/resume.sh
mv /lib/dracut/resume.sh /lib/dracut/hooks/pre-mount/10-resume.sh
else
{
if [ -x /usr/sbin/resume ]; then
printf -- '%s' 'SUBSYSTEM=="block", ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",'
printf -- ' RUN+="/sbin/initqueue --finished --unique --name 00resume /usr/sbin/resume %s $tempnode"\n' "$a_splash"
fi
printf -- '%s' 'SUBSYSTEM=="block", ACTION=="add|change", ENV{ID_FS_TYPE}=="suspend|swsuspend|swsupend",'
printf -- '%s\n' ' RUN+="/sbin/initqueue --finished --unique --name 00resume echo %M:%m > /sys/power/resume"';
} >> /etc/udev/rules.d/99-resume.rules
fi
fi
PK �5�Z�pK�0 0 95resume/resume.shnu ȯ�� #!/bin/sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
[ -s /.resume -a -b "$resume" ] && {
# First try user level resume; it offers splash etc
case "$splash" in
quiet )
a_splash="-P splash=y"
;;
* )
a_splash="-P splash=n"
;;
esac
[ -x "$(command -v resume)" ] && command resume $a_splash "$resume"
# parsing the output of ls is Bad, but until there is a better way...
ls -lH "$resume" | (
read x x x x maj min x;
echo "${maj%,}:$min"> /sys/power/resume)
>/.resume
}
PK �5�ZUަ & & 95debug/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
# do not add this module by default
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_multiple -o cat ls ps grep more cat rm strace free showmount \
ping netstat rpcinfo vi scp ping6 ssh find vi \
tcpdump cp less hostname mkdir systemd-analyze \
fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.f2fs fsck.vfat e2fsck
grep '^tcpdump:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
}
PK �5�Z�y;� � 50plymouth/module-setup.shnu ȯ�� #!/bin/bash
pkglib_dir() {
local _dirs="/usr/lib/plymouth /usr/libexec/plymouth/"
if find_binary dpkg-architecture &>/dev/null; then
_dirs+=" /usr/lib/$(dpkg-architecture -qDEB_HOST_MULTIARCH)/plymouth"
fi
for _dir in $_dirs; do
if [ -x $_dir/plymouth-populate-initrd ]; then
echo $_dir
return
fi
done
}
# called by dracut
check() {
[[ "$mount_needs" ]] && return 1
[ -z $(pkglib_dir) ] && return 1
require_binaries plymouthd plymouth plymouth-set-default-theme
}
# called by dracut
depends() {
echo drm
}
# called by dracut
install() {
PKGLIBDIR=$(pkglib_dir)
if grep -q nash ${PKGLIBDIR}/plymouth-populate-initrd \
|| [ ! -x ${PKGLIBDIR}/plymouth-populate-initrd ]; then
. "$moddir"/plymouth-populate-initrd.sh
else
PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$dracutfunctions" \
${PKGLIBDIR}/plymouth-populate-initrd -t "$initdir"
fi
inst_hook emergency 50 "$moddir"/plymouth-emergency.sh
inst_multiple readlink
if ! dracut_module_included "systemd"; then
inst_hook pre-trigger 10 "$moddir"/plymouth-pretrigger.sh
inst_hook pre-pivot 90 "$moddir"/plymouth-newroot.sh
fi
}
PK �5�Zr�3 3 50plymouth/plymouth-emergency.shnu ȯ�� #!/bin/sh
plymouth --hide-splash 2>/dev/null || :
PK �5�Z�T�<� � ! 50plymouth/plymouth-pretrigger.shnu ȯ�� #!/bin/sh
if type plymouthd >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then
if getargbool 1 plymouth.enable && getargbool 1 rd.plymouth -d -n rd_NO_PLYMOUTH; then
# first trigger graphics subsystem
udevadm trigger --action=add --attr-match=class=0x030000 >/dev/null 2>&1
# first trigger graphics and tty subsystem
udevadm trigger --action=add \
--subsystem-match=graphics \
--subsystem-match=drm \
--subsystem-match=tty \
--subsystem-match=acpi \
>/dev/null 2>&1
udevadm settle --timeout=180 2>&1 | vinfo
info "Starting plymouth daemon"
mkdir -m 0755 /run/plymouth
read consoledev rest < /sys/class/tty/console/active
consoledev=${consoledev:-tty0}
[ -x /lib/udev/console_init -a -e "/dev/$consoledev" ] && /lib/udev/console_init "/dev/$consoledev"
plymouthd --attach-to-session --pid-file /run/plymouth/pid
plymouth --show-splash 2>&1 | vinfo
# reset tty after plymouth messed with it
[ -x /lib/udev/console_init -a -e "/dev/$consoledev" ] && /lib/udev/console_init "/dev/$consoledev"
fi
fi
PK �5�Z�b�q q 50plymouth/plymouth-newroot.shnu ȯ�� #!/bin/sh
if type plymouth >/dev/null 2>&1 && [ -z "$DRACUT_SYSTEMD" ]; then
plymouth --newroot=$NEWROOT
fi
PK �5�Z8�� � & 50plymouth/plymouth-populate-initrd.shnu ȯ�� #!/bin/bash
PLYMOUTH_LOGO_FILE="/usr/share/pixmaps/system-logo-white.png"
PLYMOUTH_THEME=$(plymouth-set-default-theme)
inst_multiple plymouthd plymouth \
/etc/system-release
test -e "${PLYMOUTH_LOGO_FILE}" && inst_simple "${PLYMOUTH_LOGO_FILE}"
mkdir -m 0755 -p "${initdir}/usr/share/plymouth"
inst_libdir_file "plymouth/text.so" "plymouth/details.so"
if [[ $hostonly ]]; then
inst_multiple \
"/usr/share/plymouth/themes/details/details.plymouth" \
"/usr/share/plymouth/themes/text/text.plymouth" \
if [[ -d /usr/share/plymouth/themes/${PLYMOUTH_THEME} ]]; then
for x in "/usr/share/plymouth/themes/${PLYMOUTH_THEME}"/* ; do
[[ -f "$x" ]] || break
inst $x
done
fi
if [ -L /usr/share/plymouth/themes/default.plymouth ]; then
inst /usr/share/plymouth/themes/default.plymouth
# Install plugin for this theme
PLYMOUTH_PLUGIN=$(grep "^ModuleName=" /usr/share/plymouth/themes/default.plymouth | while read a b c || [ -n "$b" ]; do echo $b; done;)
inst_libdir_file "plymouth/${PLYMOUTH_PLUGIN}.so"
fi
else
for x in /usr/share/plymouth/themes/{text,details}/* ; do
[[ -f "$x" ]] || continue
THEME_DIR=$(dirname "$x")
mkdir -m 0755 -p "${initdir}/$THEME_DIR"
inst_multiple "$x"
done
(
cd ${initdir}/usr/share/plymouth/themes;
ln -s text/text.plymouth default.plymouth 2>&1;
)
fi
PK �5�Z�=>)
90qemu/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
if [[ $hostonly ]] || [[ $mount_needs ]]; then
if type -P systemd-detect-virt >/dev/null 2>&1; then
vm=$(systemd-detect-virt --vm 2>/dev/null)
(($? != 0)) && return 255
[[ $vm = "qemu" ]] && return 0
[[ $vm = "kvm" ]] && return 0
[[ $vm = "bochs" ]] && return 0
fi
for i in /sys/class/dmi/id/*_vendor; do
[[ -f $i ]] || continue
read vendor < $i
[[ "$vendor" == "QEMU" ]] && return 0
[[ "$vendor" == "Red Hat" ]] && return 0
[[ "$vendor" == "Bochs" ]] && return 0
done
return 255
fi
return 0
}
# called by dracut
installkernel() {
# qemu specific modules
hostonly='' instmods \
ata_piix ata_generic pata_acpi cdrom sr_mod ahci \
virtio_blk virtio virtio_ring virtio_pci \
virtio_scsi virtio_console virtio_rng virtio_mem \
spapr-vscsi \
qemu_fw_cfg
}
PK �5�ZҚ�rt t 10i18n/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
[[ "$mount_needs" ]] && return 1
require_binaries setfont loadkeys kbd_mode || return 1
return 0
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
if dracut_module_included "systemd"; then
unset FONT
unset KEYMAP
[[ -f /etc/vconsole.conf ]] && . /etc/vconsole.conf
fi
KBDSUBDIRS=consolefonts,consoletrans,keymaps,unimaps
DEFAULT_FONT="${i18n_default_font:-LatArCyrHeb-16}"
I18N_CONF="/etc/locale.conf"
VCONFIG_CONF="/etc/vconsole.conf"
# This is from 10redhat-i18n.
findkeymap () {
local MAPS=$1
local MAPNAME=${1%.map*}
local map
[[ ! -f $MAPS ]] && \
MAPS=$(find ${kbddir}/keymaps -type f -name ${MAPNAME} -o -name ${MAPNAME}.map -o -name ${MAPNAME}.map.\*)
for map in $MAPS; do
KEYMAPS="$KEYMAPS $map"
case $map in
*.gz) cmd=zgrep;;
*.bz2) cmd=bzgrep;;
*) cmd=grep ;;
esac
for INCL in $($cmd "^include " $map | while read a a b || [ -n "$a" ]; do echo ${a//\"/}; done); do
for FN in $(find ${kbddir}/keymaps -type f -name $INCL\*); do
strstr "$KEYMAPS" "$FN" || findkeymap $FN
done
done
done
}
# Function gathers variables from distributed files among the tree, maps to
# specified names and prints the result in format "new-name=value".
#
# $@ = list in format specified below (BNF notation)
#
# <list> ::= <element> | <element> " " <list>
# <element> ::= <conf-file-name> ":" <map-list>
# <map-list> ::= <mapping> | <mapping> "," <map-list>
# <mapping> ::= <src-var> "-" <dst-var> | <src-var>
#
# We assume no whitespace are allowed between symbols.
# <conf-file-name> is a file holding <src-var> in your system.
# <src-var> is a variable holding value of meaning the same as <dst-var>.
# <dst-var> is a variable which will be set up inside initramfs.
# If <dst-var> has the same name as <src-var> we can omit <dst-var>.
#
# Example:
# /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
# <list> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
# <element> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
# <conf-file-name> = /etc/conf.d/keymaps
# <map-list> = KEYMAP,extended_keymaps-EXT_KEYMAPS
# <mapping> = KEYMAP
# <src-var> = KEYMAP
# <mapping> = extended_keymaps-EXT_KEYMAPS
# <src-var> = extended_keymaps
# <dst-var> = EXT_KEYMAPS
gather_vars() {
local item map value
for item in $@
do
item=(${item/:/ })
for map in ${item[1]//,/ }
do
map=(${map//-/ })
if [[ -f "${item[0]}" ]]; then
value=$(grep "^${map[0]}=" "${item[0]}")
value=${value#*=}
echo "${map[1]:-${map[0]}}=${value}"
fi
done
done
}
install_base() {
inst_multiple setfont loadkeys kbd_mode stty
if ! dracut_module_included "systemd"; then
inst ${moddir}/console_init.sh /lib/udev/console_init
inst_rules ${moddir}/10-console.rules
inst_hook cmdline 20 "${moddir}/parse-i18n.sh"
fi
if [[ ${kbddir} != "/usr/share" ]]; then
inst_dir /usr/share
for _src in $(eval echo {${KBDSUBDIRS}}); do
[ ! -e "${initdir}/usr/share/${_src}" ] && ln -s "${kbddir}/${_src}" "${initdir}/usr/share/${_src}"
done
fi
}
install_all_kbd() {
local rel f
for _src in $(eval echo ${kbddir}/{${KBDSUBDIRS}}); do
inst_dir "$_src"
$DRACUT_CP -L -t "${initdir}/${_src}" "$_src"/*
done
# remove unnecessary files
rm -f -- "${initdir}${kbddir}/consoletrans/utflist"
find "${initdir}${kbddir}/" -name README\* -delete
find "${initdir}${kbddir}/" -name '*.gz' -print -quit \
| while read line || [ -n "$line" ]; do
inst_multiple gzip
done
find "${initdir}${kbddir}/" -name '*.bz2' -print -quit \
| while read line || [ -n "$line" ]; do
inst_multiple bzip2
done
}
install_local_i18n() {
local map
eval $(gather_vars ${i18n_vars})
[ -f $I18N_CONF ] && . $I18N_CONF
[ -f $VCONFIG_CONF ] && . $VCONFIG_CONF
shopt -q -s nocasematch
if [[ ${UNICODE} ]]
then
if [[ ${UNICODE} = YES || ${UNICODE} = 1 ]]
then
UNICODE=1
elif [[ ${UNICODE} = NO || ${UNICODE} = 0 ]]
then
UNICODE=0
else
UNICODE=''
fi
fi
if [[ ! ${UNICODE} && ${LANG} =~ .*\.UTF-?8 ]]
then
UNICODE=1
fi
shopt -q -u nocasematch
# Gentoo user may have KEYMAP set to something like "-u pl2",
KEYMAP=${KEYMAP#-* }
# openSUSE user may have KEYMAP set to something like ".gz"
KEYMAP=${KEYMAP/.gz/}
# KEYTABLE is a bit special - it defines base keymap name and UNICODE
# determines whether non-UNICODE or UNICODE version is used
if [[ ${KEYTABLE} ]]; then
if [[ ${UNICODE} == 1 ]]; then
[[ ${KEYTABLE} =~ .*\.uni.* ]] || KEYTABLE=${KEYTABLE%.map*}.uni
fi
KEYMAP=${KEYTABLE}
fi
# I'm not sure of the purpose of UNIKEYMAP and GRP_TOGGLE. They were in
# original redhat-i18n module. Anyway it won't hurt.
EXT_KEYMAPS+=\ ${UNIKEYMAP}\ ${GRP_TOGGLE}
[[ ${KEYMAP} ]] || {
dinfo 'No KEYMAP configured.'
return 1
}
findkeymap ${KEYMAP}
for map in ${EXT_KEYMAPS}
do
ddebug "Adding extra map: ${map}"
findkeymap ${map}
done
for keymap in ${KEYMAPS}; do
inst_opt_decompress ${keymap}
done
inst_opt_decompress ${kbddir}/consolefonts/${DEFAULT_FONT}.*
if [[ ${FONT} ]] && [[ ${FONT} != ${DEFAULT_FONT} ]]
then
FONT=${FONT%.psf*}
inst_opt_decompress ${kbddir}/consolefonts/${FONT}.*
fi
if [[ ${FONT_MAP} ]]
then
FONT_MAP=${FONT_MAP%.trans}
# There are three different formats that setfont supports
inst_simple ${kbddir}/consoletrans/${FONT_MAP} \
|| inst_simple ${kbddir}/consoletrans/${FONT_MAP}.trans \
|| inst_simple ${kbddir}/consoletrans/${FONT_MAP}_to_uni.trans \
|| dwarn "Could not find FONT_MAP ${FONT_MAP}!"
fi
if [[ ${FONT_UNIMAP} ]]
then
FONT_UNIMAP=${FONT_UNIMAP%.uni}
inst_simple ${kbddir}/unimaps/${FONT_UNIMAP}.uni
fi
if dracut_module_included "systemd" && [[ -f ${I18N_CONF} ]]; then
inst_simple ${I18N_CONF}
else
mksubdirs ${initdir}${I18N_CONF}
print_vars LC_ALL LANG >> ${initdir}${I18N_CONF}
fi
if dracut_module_included "systemd" && [[ -f ${VCONFIG_CONF} ]]; then
inst_simple ${VCONFIG_CONF}
else
mksubdirs ${initdir}${VCONFIG_CONF}
print_vars KEYMAP EXT_KEYMAPS UNICODE FONT FONT_MAP FONT_UNIMAP >> ${initdir}${VCONFIG_CONF}
fi
return 0
}
checks() {
for kbddir in ${kbddir} /usr/lib/kbd /lib/kbd /usr/share /usr/share/kbd
do
[[ -d "${kbddir}" ]] && \
for dir in ${KBDSUBDIRS//,/ }
do
[[ -d "${kbddir}/${dir}" ]] && continue
false
done && break
kbddir=''
done
[[ -f $I18N_CONF && -f $VCONFIG_CONF ]] || \
[[ ! ${hostonly} || ${i18n_vars} ]] || {
derror 'i18n_vars not set! Please set up i18n_vars in ' \
'configuration file.'
}
return 0
}
if checks; then
install_base
if [[ ${hostonly} ]] && ! [[ ${i18n_install_all} == "yes" ]]; then
install_local_i18n || install_all_kbd
else
install_all_kbd
fi
fi
}
PK �5�Z� zfD D
10i18n/READMEnu �[��� dracut i18n module
------------------
INDEX
0. Introduction
1. Hostonly vs Generic
2. Configuration
2.1. Variables
2.2. Setting up mappings
2.3. Additional settings
3. Kernel parameters
~
0. Introduction
i18n module provides internationalization for initramfs at runtime. It
is intended to be generic across different GNU/Linux distributions.
i18n and keyboard settings are stored in different files among
distributions. To deal with it avoiding hardcoding those differences in
the installation script we handle it by mappings between variables used
by dracut and the ones in the system. Package maintainer is expected to
create those for his/her distribution and it's appreciated to share it
with us, so we can include it in source package.
1. Hostonly vs Generic
If you invoke dracut with '-H' option, i18n module install script will
gather variables values from your configuration files using mappings
provided in "/etc/dracut.conf.d/<foo>.conf". Those variables will be
put in "etc/vconsole.conf" and "etc/locale.conf" files inside initramfs
image. Next it will install only declared font, keymaps and so.
When building generic image (dracut without '-H' option), install script
copies all content of directories: consolefonts, consoletrans, unimaps
and keymaps to image. Take into account that's about 4 MiB.
2. Configuration
2.1. Variables
The following variables are used by i18n install script and at initramfs
runtime:
KEYMAP - keyboard translation table loaded by loadkeys
KEYTABLE - base name for keyboard translation table; if UNICODE is
true, Unicode version will be loaded. Overrides KEYMAP.
EXT_KEYMAPS - list of extra keymaps to bo loaded (sep. by space)
UNICODE - boolean, indicating UTF-8 mode
FONT - console font
FONT_MAP - see description of '-m' parameter in setfont manual
FONT_UNIMAP - see description of '-u' parameter in setfont manual
The following are appended to EXT_KEYMAPS only during build time:
UNIKEYMAP
GRP_TOGGLE
They were used in 10redhat-i18n module, but not sure of its purpose.
I'm leaving it in case... The following are taken from the environment:
LANG
LC_ALL
If UNICODE variable is not provided, script indicates if UTF-8 should be
used on the basis of LANG value (if it ends with ".utf8" or similar).
2.2. Setting up mappings
Mappings between variables listed in 2.1. and the ones spread around
your system are set up in /etc/dracut.conf.d/<foo>.conf. You need to
assign mappings to i18n_vars. Here's an example:
i18n_vars="/etc/conf.d/keymaps:KEYMAP,EXTENDED_KEYMAPS-EXT_KEYMAPS /etc/conf.d/consolefont:CONSOLEFONT-FONT,CONSOLETRANSLATION-FONT_MAP /etc/rc.conf:UNICODE"
First we've got name of file in host file system tree. After colon
there's mapping: <from>-<to>. If both variables have the same name you
can enter just a single, but it's important to specify it! The module
will source only variables you've listed.
Below there's detailed description in BNF:
<list> ::= <element> | <element> " " <list>
<element> ::= <conf-file-name> ":" <map-list>
<map-list> ::= <mapping> | <mapping> "," <map-list>
<mapping> ::= <src-var> "-" <dst-var> | <src-var>
We assume no whitespace are allowed between symbols.
<conf-file-name> is a file holding <src-var> in your system.
<src-var> is a variable holding value of meaning the same as <dst-var>.
<dst-var> is a variable which will be set up inside initramfs.
If <dst-var> has the same name as <src-var> we can omit <dst-var>.
Example:
/etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
<list> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
<element> = /etc/conf.d/keymaps:KEYMAP,extended_keymaps-EXT_KEYMAPS
<conf-file-name> = /etc/conf.d/keymaps
<map-list> = KEYMAP,extended_keymaps-EXT_KEYMAPS
<mapping> = KEYMAP
<src-var> = KEYMAP
<mapping> = extended_keymaps-EXT_KEYMAPS
<src-var> = extended_keymaps
<dst-var> = EXT_KEYMAPS
2.3. Additional settings
If you encounter following error message: "Directories consolefonts,
consoletrans, keymaps, unimaps not found.", you can provide path where
those directories lie in your system by setting kbddir in configuration
file (the same where you put mappings).
3. Kernel parameters
If you create generic initramfs you can set up i18n by kernel
parameters using variables listed in 2.1. (except of UNIKEYMAP
and GRP_TOGGLE) The recommended minimum is: FONT and KEYMAP.
PK �5�Z(�2�� � 10i18n/10-console.rulesnu �[��� # Console initialization - keyboard, font, etc.
KERNEL=="tty0", RUN+="/sbin/initqueue --onetime --unique --name console_init_$name /lib/udev/console_init $root/$name"
PK �5�Z�G�� � 10i18n/parse-i18n.shnu ȯ�� #!/bin/sh
inst_key_val() {
local _value
local _file
local _default
_file="$1"; shift
_key="$1"; shift
_default="$1"; shift
_value="$(getarg $@)"
[ -z "${_value}" ] && _value=$_default
if [ -n "${_value}" ]; then
printf '%s="%s"\n' ${_key} ${_value} >> $_file
fi
unset _file
unset _value
}
inst_key_val /etc/vconsole.conf KEYMAP '' rd.vconsole.keymap KEYMAP -d KEYTABLE
inst_key_val /etc/vconsole.conf FONT '' rd.vconsole.font FONT -d SYSFONT
inst_key_val /etc/vconsole.conf FONT_MAP '' rd.vconsole.font.map FONT_MAP -d CONTRANS
inst_key_val /etc/vconsole.conf FONT_UNIMAP '' rd.vconsole.font.unimap FONT_UNIMAP -d UNIMAP
inst_key_val /etc/vconsole.conf UNICODE 1 rd.vconsole.font.unicode UNICODE vconsole.unicode
inst_key_val /etc/vconsole.conf EXT_KEYMAP '' rd.vconsole.keymap.ext EXT_KEYMAP
inst_key_val /etc/locale.conf LANG '' rd.locale.LANG LANG
inst_key_val /etc/locale.conf LC_ALL '' rd.locale.LC_ALL LC_ALL
if [ -f /etc/locale.conf ]; then
. /etc/locale.conf
export LANG
export LC_ALL
fi
PK �5�Z ���L L 10i18n/console_init.shnu ȯ�� #!/bin/sh
[ -n "$DRACUT_SYSTEMD" ] && exit 0
if [ -x $systemdutildir/systemd-vconsole-setup ]; then
$systemdutildir/systemd-vconsole-setup "$@"
fi
[ -e /etc/vconsole.conf ] && . /etc/vconsole.conf
DEFAULT_FONT=LatArCyrHeb-16
DEFAULT_KEYMAP=/etc/sysconfig/console/default.kmap
set_keyboard() {
local param
[ "${UNICODE}" = 1 ] && param=-u || param=-a
kbd_mode ${param}
}
set_terminal() {
local dev=$1
if [ "${UNICODE}" = 1 ]; then
printf '\033%%G' >&7
stty -F ${dev} iutf8
else
printf '\033%%@' >&7
stty -F ${dev} -iutf8
fi
}
set_keymap() {
local utf_switch
if [ -z "${KEYMAP}" ]; then
[ -f "${DEFAULT_KEYMAP}" ] && KEYMAP=${DEFAULT_KEYMAP}
fi
[ -n "${KEYMAP}" ] || return 1
[ "${UNICODE}" = 1 ] && utf_switch=-u
loadkeys -q ${utf_switch} ${KEYMAP} ${EXT_KEYMAPS}
}
set_font() {
local dev=$1; local trans=''; local uni=''
[ -z "${FONT}" ] && FONT=${DEFAULT_FONT}
[ -n "${FONT_MAP}" ] && trans="-m ${FONT_MAP}"
[ -n "${FONT_UNIMAP}" ] && uni="-u ${FONT_UNIMAP}"
setfont ${FONT} -C ${dev} ${trans} ${uni}
}
dev_close() {
exec 6>&-
exec 7>&-
}
dev_open() {
local dev=$1
exec 6<${dev} && \
exec 7>>${dev}
}
dev=/dev/${1#/dev/}
devname=${dev#/dev/}
[ -c "${dev}" ] || {
echo "Usage: $0 device" >&2
exit 1
}
dev_open ${dev}
for fd in 6 7; do
if ! [ -t ${fd} ]; then
echo "ERROR: File descriptor not opened: ${fd}" >&2
dev_close
exit 1
fi
done
set_keyboard
set_terminal ${dev}
set_font ${dev}
set_keymap
dev_close
PK �5�Z� S 97biosdevname/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
[[ "$mount_needs" ]] && return 1
require_binaries biosdevname || return 1
return 0
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_multiple biosdevname
inst_rules 71-biosdevname.rules
}
PK �5�Z"��5 5 " 97biosdevname/parse-biosdevname.shnu ȯ�� #!/bin/sh
if ! getargbool 1 biosdevname; then
info "biosdevname=0: removing biosdevname network renaming"
udevproperty UDEV_BIOSDEVNAME=
rm -f -- /etc/udev/rules.d/71-biosdevname.rules
else
info "biosdevname=1: activating biosdevname network renaming"
udevproperty UDEV_BIOSDEVNAME=1
fi
PK �5�ZIa��� � 98selinux/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_hook pre-pivot 50 "$moddir/selinux-loadpolicy.sh"
inst_multiple setenforce
}
PK �5�Z�w 0� � 98selinux/selinux-loadpolicy.shnu ȯ�� #!/bin/sh
# FIXME: load selinux policy. this should really be done after we switchroot
rd_load_policy()
{
# If SELinux is disabled exit now
getarg "selinux=0" > /dev/null && return 0
SELINUX="enforcing"
[ -e "$NEWROOT/etc/selinux/config" ] && . "$NEWROOT/etc/selinux/config"
# Check whether SELinux is in permissive mode
permissive=0
getarg "enforcing=0" > /dev/null
if [ $? -eq 0 -o "$SELINUX" = "permissive" ]; then
permissive=1
fi
# Attempt to load SELinux Policy
if [ -x "$NEWROOT/usr/sbin/load_policy" -o -x "$NEWROOT/sbin/load_policy" ]; then
local ret=0
local out
info "Loading SELinux policy"
mount -o bind /sys $NEWROOT/sys
# load_policy does mount /proc and /sys/fs/selinux in
# libselinux,selinux_init_load_policy()
if [ -x "$NEWROOT/sbin/load_policy" ]; then
out=$(LANG=C chroot "$NEWROOT" /sbin/load_policy -i 2>&1)
ret=$?
info $out
else
out=$(LANG=C chroot "$NEWROOT" /usr/sbin/load_policy -i 2>&1)
ret=$?
info $out
fi
umount $NEWROOT/sys/fs/selinux
umount $NEWROOT/sys
if [ "$SELINUX" = "disabled" ]; then
return 0;
fi
if [ $ret -eq 0 -o $ret -eq 2 ]; then
# If machine requires a relabel, force to permissive mode
[ -e "$NEWROOT"/.autorelabel ] && LANG=C /usr/sbin/setenforce 0
mount --rbind /dev "$NEWROOT/dev"
LANG=C chroot "$NEWROOT" /sbin/restorecon -R /dev
umount -R "$NEWROOT/dev"
return 0
fi
warn "Initial SELinux policy load failed."
if [ $ret -eq 3 -o $permissive -eq 0 ]; then
warn "Machine in enforcing mode."
warn "Not continuing"
emergency_shell -n selinux
exit 1
fi
return 0
elif [ $permissive -eq 0 -a "$SELINUX" != "disabled" ]; then
warn "Machine in enforcing mode and cannot execute load_policy."
warn "To disable selinux, add selinux=0 to the kernel command line."
warn "Not continuing"
emergency_shell -n selinux
exit 1
fi
}
rd_load_policy
PK �5�Z^Y~:
:
91crypt-gpg/crypt-gpg-lib.shnu ȯ�� #!/bin/sh
command -v ask_for_password >/dev/null || . /lib/dracut-crypt-lib.sh
# gpg_decrypt mnt_point keypath keydev device
#
# Decrypts symmetrically encrypted (password or OpenPGP smartcard) key to standard output.
#
# mnt_point - mount point where <keydev> is already mounted
# keypath - GPG encrypted key path relative to <mnt_point>
# keydev - device on which key resides; only to display in prompt
# device - device to be opened by cryptsetup; only to display in prompt
gpg_decrypt() {
local mntp="$1"
local keypath="$2"
local keydev="$3"
local device="$4"
local gpghome=/tmp/gnupg
local opts="--homedir $gpghome --no-mdc-warning --skip-verify --quiet"
opts="$opts --logger-file /dev/null --batch --no-tty --passphrase-fd 0"
mkdir -m 0700 -p "$gpghome"
# Setup GnuPG home and gpg-agent for usage of OpenPGP smartcard.
# This requires GnuPG >= 2.1, as it uses the new ,,pinentry-mode´´
# feature, which - when set to ,,loopback´´ - allows us to pipe
# the smartcard's pin to GnuPG (instead of using a normal pinentry
# program needed with GnuPG < 2.1), making for uncomplicated
# integration with the existing codebase.
local useSmartcard="0"
local gpgMajorVersion="$(gpg --version | sed -n 1p | sed -n -r -e 's|.* ([0-9]*).*|\1|p')"
local gpgMinorVersion="$(gpg --version | sed -n 1p | sed -n -r -e 's|.* [0-9]*\.([0-9]*).*|\1|p')"
if [ "${gpgMajorVersion}" -ge 2 ] && [ "${gpgMinorVersion}" -ge 1 ] \
&& [ -f /root/crypt-public-key.gpg ] && getargbool 1 rd.luks.smartcard ; then
useSmartcard="1"
echo "allow-loopback-pinentry" >> "$gpghome/gpg-agent.conf"
GNUPGHOME="$gpghome" gpg-agent --quiet --daemon
GNUPGHOME="$gpghome" gpg --quiet --no-tty --import < /root/crypt-public-key.gpg
local smartcardSerialNumber="$(GNUPGHOME=$gpghome gpg --no-tty --card-status \
| sed -n -r -e 's|Serial number.*: ([0-9]*)|\1|p' | tr -d '\n')"
if [ -n "${smartcardSerialNumber}" ]; then
inputPrompt="PIN (OpenPGP card ${smartcardSerialNumber})"
fi
GNUPGHOME="$gpghome" gpg-connect-agent 1>/dev/null learn /bye
opts="$opts --pinentry-mode=loopback"
fi
ask_for_password \
--cmd "gpg $opts --decrypt $mntp/$keypath" \
--prompt "${inputPrompt:-Password ($keypath on $keydev for $device)}" \
--tries 3 --tty-echo-off
# Clean up the smartcard gpg-agent
if [ "${useSmartcard}" == "1" ]; then
GNUPGHOME="$gpghome" gpg-connect-agent 1>/dev/null killagent /bye
fi
rm -rf -- "$gpghome"
}
PK �5�Z{o�o� � 91crypt-gpg/module-setup.shnu ȯ�� #!/bin/bash
# GPG support is optional
# called by dracut
check() {
require_binaries gpg || return 1
if sc_requested; then
if ! sc_supported; then
dwarning "crypt-gpg: GnuPG >= 2.1 with scdaemon and libusb required for ccid smartcard support"
return 1
fi
return 0
fi
return 255
}
# called by dracut
depends() {
echo crypt
}
# called by dracut
install() {
inst_multiple gpg
inst "$moddir/crypt-gpg-lib.sh" "/lib/dracut-crypt-gpg-lib.sh"
if sc_requested; then
inst_multiple gpg-agent
inst_multiple gpg-connect-agent
inst_multiple /usr/libexec/scdaemon
cp "$(sc_public_key)" "${initdir}/root/"
fi
}
sc_public_key() {
echo -n "/etc/dracut.conf.d/crypt-public-key.gpg"
}
# CCID Smartcard support requires GnuPG >= 2.1 with scdaemon and libusb
sc_supported() {
local gpgMajor="$(gpg --version | sed -n 1p | sed -n -r -e 's|.* ([0-9]*).*|\1|p')"
local gpgMinor="$(gpg --version | sed -n 1p | sed -n -r -e 's|.* [0-9]*\.([0-9]*).*|\1|p')"
if [[ "${gpgMajor}" -gt 2 || "${gpgMajor}" -eq 2 && "${gpgMinor}" -ge 1 ]] && \
require_binaries gpg-agent &&
require_binaries gpg-connect-agent &&
require_binaries /usr/libexec/scdaemon &&
(ldd /usr/libexec/scdaemon | grep libusb > /dev/null); then
return 0
else
return 1
fi
}
sc_requested() {
if [ -f "$(sc_public_key)" ]; then
return 0
else
return 1
fi
}
PK �5�ZF%��#
#
91crypt-gpg/READMEnu �[��� # Directions for changing a system from password-based gpg keyfile
# to smartcard-based gpg keyfile
# Be sure that you meet the following requirements:
# 1. GnuPG >= 2.1 installed with
# * Smartcard support enabled (scdaemon must be built)
# * Direct CCID access built into scdaemon
# 2. A password-based gpg keyfile ${KEYFILE} (e.g. "keyfile.gpg"):
# That is, a file containing the slot key for LUKS, which
# has been encrypted symmetrically with GnuPG using
# a password.
# 3. Your public OpenPGP identity ${RECIPIENT} (e.g. "3A696356")
# 4. An OpenPGP smartcard holding the decryption key associated
# with your public identity
# 5. A CCID smartcard reader
# Notes: Requirement 4. and 5. can of course be one device, e.g.
# a USB token with an integrated OpenPGP smartcard
# Make a backup of your keyfile (assuming it lies on the boot partition)
$ cp /boot/${KEYFILE} /safe/place/keyfile.bak.gpg
# Change your keyfile from purely password-based to both
# password-based and key-based (you can then decrypt the keyfile
# with either method). As an example aes256 is chosen, the cipher
# is not important to this guide, but do note that your kernel
# must support it at boot time (be it built into the kernel image
# or loaded as a module from the initramfs).
$ cat /safe/place/keyfile.bak.gpg | gpg -d | gpg --encrypt --recipient ${RECIPIENT} --cipher-algo aes256 --armor -c > /safe/place/keyfile_sc.gpg
# Verify that you can decrypt your new keyfile both with the password
# and your smartcard.
# (with smartcard inserted, you should be prompted for your PIN, unless
# you already did so and have not yet timed out)
$ gpg -d /safe/place/keyfile_sc.gpg
# (with smartcard disconnected, you should be prompted for your password)
$ gpg -d /safe/place/keyfile_sc.gpg
# After verification, replace your old keyfile with your new one
$ su -c 'cp /safe/place/keyfile_sc.gpg /boot/${KEYFILE}'
# Export your public key to where crypt-gpg can find it
$ gpg --armor --export-options export-minimal --export ${RECIPIENT} > /safe/place/crypt-public-key.gpg
$ su -c 'cp /safe/place/crypt-public-key.gpg /etc/dracut.conf.d/crypt-public-key.gpg'
# Rebuild your initramfs as usual
# When booting with any of the requirements not met, crypt-gpg will default to password-based keyfile unlocking.
# If all requirements are met and smartcard support is not disabled by setting the kernel option "rd.luks.smartcard=0"
# crypt-gpg will try find and use a connected OpenPGP smartcard by prompting you for the PIN and then
# unlocking the gpg keyfile with the smartcard.
PK �5�Z�O�٠� 90dmraid/61-dmraid-imsm.rulesnu �[��� # This file causes block devices with RAID (dmraid) signatures to
# automatically cause dmraid_scan to be run.
# See udev(8) for syntax
SUBSYSTEM!="block", GOTO="dm_end"
ACTION!="add|change", GOTO="dm_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="dm_end"
ENV{ID_FS_TYPE}=="linux_raid_member", GOTO="dm_end"
ENV{ID_FS_TYPE}!="*_raid_member", GOTO="dm_end"
ENV{ID_FS_TYPE}=="isw_raid_member", ENV{rd_NO_MDIMSM}!="?*", GOTO="dm_end"
ENV{ID_FS_TYPE}=="ddf_raid_member", ENV{rd_NO_MDDDF}!="?*", GOTO="dm_end"
ENV{rd_NO_DM}=="?*", GOTO="dm_end"
OPTIONS:="nowatch"
ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", GOTO="dm_end"
PROGRAM=="/bin/sh -c 'for i in $sys/$devpath/holders/dm-[0-9]*; do [ -e $$i ] && exit 0; done; exit 1;' ", \
GOTO="dm_end"
RUN+="/sbin/initqueue --onetime --unique --settled /sbin/dmraid_scan $env{DEVNAME}"
LABEL="dm_end"
PK �5�Z� �K K 90dmraid/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
local _rootdev
# if we don't have dmraid installed on the host system, no point
# in trying to support it in the initramfs.
require_binaries dmraid || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for dev in "${!host_fs_types[@]}"; do
[[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
DEVPATH=$(get_devpath_block "$dev")
for holder in "$DEVPATH"/holders/*; do
[[ -e "$holder" ]] || continue
[[ -e "$holder/dm" ]] && return 0
break
done
done
return 255
}
return 0
}
# called by dracut
depends() {
echo dm rootfs-block
return 0
}
# called by dracut
cmdline() {
local _activated
declare -A _activated
for dev in "${!host_fs_types[@]}"; do
local holder DEVPATH DM_NAME majmin
[[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
DEVPATH=$(get_devpath_block "$dev")
for holder in "$DEVPATH"/holders/*; do
[[ -e "$holder" ]] || continue
dev="/dev/${holder##*/}"
DM_NAME="$(dmsetup info -c --noheadings -o name "$dev" 2>/dev/null)"
[[ ${DM_NAME} ]] && break
done
[[ ${DM_NAME} ]] || continue
if ! [[ ${_activated[${DM_NAME}]} ]]; then
printf "%s" " rd.dm.uuid=${DM_NAME}"
_activated["${DM_NAME}"]=1
fi
done
}
# called by dracut
install() {
local _i
if [[ $hostonly_cmdline == "yes" ]]; then
local _raidconf=$(cmdline)
[[ $_raidconf ]] && printf "%s\n" "$_raidconf" >> "${initdir}/etc/cmdline.d/90dmraid.conf"
fi
inst_multiple dmraid
inst_multiple -o kpartx
inst $(command -v partx) /sbin/partx
inst "$moddir/dmraid.sh" /sbin/dmraid_scan
inst_rules 66-kpartx.rules 67-kpartx-compat.rules
inst_libdir_file "libdmraid-events*.so*"
inst_rules "$moddir/61-dmraid-imsm.rules"
#inst "$moddir/dmraid-cleanup.sh" /sbin/dmraid-cleanup
inst_hook pre-trigger 30 "$moddir/parse-dm.sh"
}
PK �5�Zw��o: : 90dmraid/parse-dm.shnu ȯ�� #!/bin/sh
# nodmraid for anaconda / rc.sysinit compatibility
if ! getargbool 1 rd.dm -d -n rd_NO_DM || getarg "rd.dm=0" -d nodmraid; then
info "rd.dm=0: removing DM RAID activation"
udevproperty rd_NO_DM=1
fi
if ! command -v mdadm >/dev/null \
|| ! getargbool 1 rd.md.imsm -d -n rd_NO_MDIMSM -n noiswmd \
|| ! getargbool 1 rd.md -d -n rd_NO_MD; then
info "rd.md.imsm=0: no MD RAID for imsm/isw raids"
udevproperty rd_NO_MDIMSM=1
fi
if ! command -v mdadm >/dev/null \
|| ! getargbool 1 rd.md.ddf -n rd_NO_MDDDF -n noddfmd \
|| ! getargbool 1 rd.md -d -n rd_NO_MD; then
info "rd.md.ddf=0: no MD RAID for SNIA ddf raids"
udevproperty rd_NO_MDDDF=1
fi
DM_RAIDS=$(getargs rd.dm.uuid -d rd_DM_UUID=)
if [ -z "$DM_RAIDS" ] && ! getargbool 0 rd.auto; then
udevproperty rd_NO_DM=1
fi
PK �5�ZW�x� � 90dmraid/dmraid.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
dev="$1"
devenc=$(str_replace "$1" '/' '\2f')
[ -e /tmp/dmraid.$devenc ] && exit 0
>/tmp/dmraid.$devenc
DM_RAIDS=$(getargs rd.dm.uuid -d rd_DM_UUID=)
if [ -n "$DM_RAIDS" ] || getargbool 0 rd.auto; then
DM_CLEANUP="no"
# run dmraid if udev has settled
info "Scanning for dmraid devices $DM_RAIDS"
SETS=$(dmraid -c -s)
if [ "$SETS" = "no raid disks" -o "$SETS" = "no raid sets" ]; then
return
fi
info "Found dmraid sets:"
echo $SETS|vinfo
if [ -n "$DM_RAIDS" ]; then
# only activate specified DM RAIDS
for r in $DM_RAIDS; do
for s in $SETS; do
if [ "${s##$r}" != "$s" ]; then
info "Activating $s"
dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
fi
done
done
else
# scan and activate all DM RAIDS
for s in $SETS; do
info "Activating $s"
dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
[ -e "/dev/mapper/$s" ] && kpartx -a "/dev/mapper/$s" 2>&1 | vinfo
udevsettle
done
fi
need_shutdown
fi
PK �5�ZN���X X 95iscsi/cleanup-iscsi.shnu ȯ�� #!/bin/sh
[ -z "${DRACUT_SYSTEMD}" ] && [ -e /sys/module/bnx2i ] && killproc iscsiuio
PK �5�ZvwH�$ �$ 95iscsi/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
local _rootdev
# If our prerequisites are not met, fail anyways.
require_binaries iscsi-iname iscsiadm iscsid || return 1
# If hostonly was requested, fail the check if we are not actually
# booting from root.
is_iscsi() {
local _dev=$1
[[ -L "/sys/dev/block/$_dev" ]] || return
cd "$(readlink -f "/sys/dev/block/$_dev")"
until [[ -d sys || -d iscsi_session ]]; do
cd ..
done
[[ -d iscsi_session ]]
}
[[ $hostonly ]] || [[ $mount_needs ]] && {
pushd . >/dev/null
for_each_host_dev_and_slaves is_iscsi || return 255
popd >/dev/null
}
return 0
}
get_ibft_mod() {
local ibft_mac=$1
local iface_mac iface_mod
# Return the iSCSI offload module for a given MAC address
for iface_desc in $(iscsiadm -m iface | cut -f 2 -d ' '); do
iface_mod=${iface_desc%%,*}
iface_mac=${iface_desc#*,}
iface_mac=${iface_mac%%,*}
if [ "$ibft_mac" = "$iface_mac" ] ; then
echo $iface_mod
return 0
fi
done
}
install_ibft() {
# When iBFT / iscsi_boot is detected:
# - Use 'ip=ibft' to set up iBFT network interface
# Note: bnx2i is using a different MAC address of iSCSI offloading
# so the 'ip=ibft' parameter must not be set
# - specify firmware booting cmdline parameter
for d in /sys/firmware/* ; do
if [ -d ${d}/ethernet0 ] ; then
read ibft_mac < ${d}/ethernet0/mac
ibft_mod=$(get_ibft_mod $ibft_mac)
fi
if [ -z "$ibft_mod" ] && [ -d ${d}/ethernet1 ] ; then
read ibft_mac < ${d}/ethernet1/mac
ibft_mod=$(get_ibft_mod $ibft_mac)
fi
if [ -d ${d}/initiator ] ; then
if [ ${d##*/} = "ibft" ] && [ "$ibft_mod" != "bnx2i" ] ; then
echo -n "rd.iscsi.ibft=1 "
fi
echo -n "rd.iscsi.firmware=1"
fi
done
}
install_iscsiroot() {
local devpath=$1
local scsi_path iscsi_lun session c d conn host flash
local iscsi_session iscsi_address iscsi_port iscsi_targetname iscsi_tpgt
local bootproto
scsi_path=${devpath%%/block*}
[ "$scsi_path" = "$devpath" ] && return 1
iscsi_lun=${scsi_path##*:}
[ "$iscsi_lun" = "$scsi_path" ] && return 1
session=${devpath%%/target*}
[ "$session" = "$devpath" ] && return 1
iscsi_session=${session##*/}
[ "$iscsi_session" = "$session" ] && return 1
host=${session%%/session*}
[ "$host" = "$session" ] && return 1
iscsi_host=${host##*/}
for flash in ${host}/flashnode_sess-* ; do
[ -f "$flash" ] || continue
[ ! -e "$flash/is_boot_target" ] && continue
is_boot=$(cat $flash/is_boot_target)
if [ $is_boot -eq 1 ] ; then
# qla4xxx flashnode session; skip iBFT discovery
iscsi_initiator=$(cat /sys/class/iscsi_host/${iscsi_host}/initiatorname)
echo "rd.iscsi.initiator=${iscsi_initiator}"
return;
fi
done
for d in ${session}/* ; do
case $d in
*connection*)
c=${d##*/}
conn=${d}/iscsi_connection/${c}
if [ -d ${conn} ] ; then
iscsi_address=$(cat ${conn}/persistent_address)
iscsi_port=$(cat ${conn}/persistent_port)
fi
;;
*session)
if [ -d ${d}/${iscsi_session} ] ; then
iscsi_initiator=$(cat ${d}/${iscsi_session}/initiatorname)
iscsi_targetname=$(cat ${d}/${iscsi_session}/targetname)
fi
;;
esac
done
[ -z "$iscsi_address" ] && return
local_address=$(ip -o route get to $iscsi_address | sed -n 's/.*src \([0-9a-f.:]*\).*/\1/p')
ifname=$(ip -o route get to $iscsi_address | sed -n 's/.*dev \([^ ]*\).*/\1/p')
# follow ifcfg settings for boot protocol
for _path in \
"/etc/sysconfig/network-scripts/ifcfg-$ifname" \
"/etc/sysconfig/network/ifcfg-$ifname" \
; do
[ -r "$_path" ] && bootproto=$(sed -n "s/BOOTPROTO='\?\([[:alpha:]]*6\?\)4\?/\1/p" "$_path")
done
if [ $bootproto ]; then
printf 'ip=%s:%s ' ${ifname} ${bootproto}
else
printf 'ip=%s:static ' ${ifname}
fi
if [ -e /sys/class/net/$ifname/address ] ; then
ifmac=$(cat /sys/class/net/$ifname/address)
printf 'ifname=%s:%s ' ${ifname} ${ifmac}
fi
if [ -n "$iscsi_address" -a -n "$iscsi_targetname" ] ; then
if [ -n "$iscsi_port" -a "$iscsi_port" -eq 3260 ] ; then
iscsi_port=
fi
if [ -n "$iscsi_lun" -a "$iscsi_lun" -eq 0 ] ; then
iscsi_lun=
fi
# In IPv6 case rd.iscsi.initatior= must pass address in [] brackets
case "$iscsi_address" in
*:*)
iscsi_address="[$iscsi_address]"
;;
esac
# Must be two separate lines, so that "sort | uniq" commands later
# can sort out rd.iscsi.initiator= duplicates
echo "rd.iscsi.initiator=${iscsi_initiator}"
echo "netroot=iscsi:${iscsi_address}::${iscsi_port}:${iscsi_lun}:${iscsi_targetname}"
echo "rd.neednet=1"
fi
return 0
}
install_softiscsi() {
[ -d /sys/firmware/ibft ] && return 0
is_softiscsi() {
local _dev=$1
local iscsi_dev
[[ -L "/sys/dev/block/$_dev" ]] || return
iscsi_dev=$(cd -P /sys/dev/block/$_dev; echo $PWD)
install_iscsiroot $iscsi_dev
}
for_each_host_dev_and_slaves_all is_softiscsi || return 255
return 0
}
# called by dracut
depends() {
echo network rootfs-block
}
# called by dracut
installkernel() {
local _arch=$(uname -m)
local _funcs='iscsi_register_transport'
instmods bnx2i qla4xxx cxgb3i cxgb4i be2iscsi qedi
hostonly="" instmods iscsi_tcp iscsi_ibft crc32c iscsi_boot_sysfs
if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then
_s390drivers="=drivers/s390/scsi"
fi
dracut_instmods -o -s ${_funcs} =drivers/scsi ${_s390drivers:+"$_s390drivers"}
}
# called by dracut
cmdline() {
local _iscsiconf=$(install_ibft)
{
if [ "$_iscsiconf" ] ; then
echo ${_iscsiconf}
else
install_softiscsi
fi
} | sort | uniq
}
# called by dracut
install() {
inst_multiple -o iscsiuio
inst_libdir_file 'libgcc_s.so*'
inst_multiple umount iscsi-iname iscsiadm iscsid
inst_multiple -o \
$systemdsystemunitdir/iscsid.socket \
$systemdsystemunitdir/iscsid.service \
$systemdsystemunitdir/iscsiuio.service \
$systemdsystemunitdir/iscsiuio.socket \
$systemdsystemunitdir/sockets.target.wants/iscsid.socket \
$systemdsystemunitdir/sockets.target.wants/iscsiuio.socket
if [[ $hostonly ]]; then
inst_dir $(/usr/bin/find /etc/iscsi)
else
inst_simple /etc/iscsi/iscsid.conf
fi
# Detect iBFT and perform mandatory steps
if [[ $hostonly_cmdline == "yes" ]] ; then
local _iscsiconf=$(cmdline)
[[ $_iscsiconf ]] && printf "%s\n" "$_iscsiconf" >> "${initdir}/etc/cmdline.d/95iscsi.conf"
fi
inst_hook cmdline 90 "$moddir/parse-iscsiroot.sh"
inst_hook cleanup 90 "$moddir/cleanup-iscsi.sh"
inst "$moddir/iscsiroot.sh" "/sbin/iscsiroot"
if ! dracut_module_included "systemd"; then
inst "$moddir/mount-lun.sh" "/bin/mount-lun.sh"
else
inst_multiple -o \
$systemdsystemunitdir/iscsi.service \
$systemdsystemunitdir/iscsid.service \
$systemdsystemunitdir/iscsid.socket \
$systemdsystemunitdir/iscsiuio.service \
$systemdsystemunitdir/iscsiuio.socket \
iscsiadm iscsid
for i in \
iscsid.socket \
iscsiuio.socket \
; do
systemctl -q --root "$initdir" enable "$i"
done
for i in \
iscsid.service \
iscsiuio.service \
; do
systemctl -q --root "$initdir" add-wants basic.target "$i"
done
# Make sure iscsid is started after dracut-cmdline and ready for the initqueue
mkdir -p "${initdir}/$systemdsystemunitdir/iscsid.service.d"
(
echo "[Unit]"
echo "After=dracut-cmdline.service"
echo "Before=dracut-initqueue.service"
) > "${initdir}/$systemdsystemunitdir/iscsid.service.d/dracut.conf"
# The iscsi deamon does not need to wait for any storage inside initrd
mkdir -p "${initdir}/$systemdsystemunitdir/iscsid.socket.d"
(
echo "[Unit]"
echo "DefaultDependencies=no"
echo "Conflicts=shutdown.target"
echo "Before=shutdown.target sockets.target"
) > "${initdir}/$systemdsystemunitdir/iscsid.socket.d/dracut.conf"
mkdir -p "${initdir}/$systemdsystemunitdir/iscsiuio.socket.d"
(
echo "[Unit]"
echo "DefaultDependencies=no"
echo "Conflicts=shutdown.target"
echo "Before=shutdown.target sockets.target"
) > "${initdir}/$systemdsystemunitdir/iscsiuio.socket.d/dracut.conf"
fi
inst_dir /var/lib/iscsi
dracut_need_initqueue
}
PK �5�ZortJ� � 95iscsi/parse-iscsiroot.shnu ȯ�� #!/bin/sh
#
# Preferred format:
# root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
# [root=*] netroot=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
#
# Legacy formats:
# [net]root=[iscsi] iscsiroot=[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
# [net]root=[iscsi] iscsi_firmware
#
# root= takes precedence over netroot= if root=iscsi[...]
#
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
if [ -z "$netroot" ]; then
for nroot in $(getargs netroot=); do
[ "${nroot%%:*}" = "iscsi" ] && break
done
if [ "${nroot%%:*}" = "iscsi" ]; then
netroot="$nroot"
else
for nroot in $(getargs netroot=); do
[ "${nroot%%:*}" = "dhcp" ] && break
done
netroot="$nroot"
fi
fi
[ -z "$iscsiroot" ] && iscsiroot=$(getarg iscsiroot=)
[ -z "$iscsi_firmware" ] && getargbool 0 rd.iscsi.firmware -y iscsi_firmware && iscsi_firmware="1"
[ -n "$iscsiroot" ] && [ -n "$iscsi_firmware" ] && die "Mixing iscsiroot and iscsi_firmware is dangerous"
type write_fs_tab >/dev/null 2>&1 || . /lib/fs-lib.sh
# Root takes precedence over netroot
if [ "${root%%:*}" = "iscsi" ] ; then
if [ -n "$netroot" ] ; then
echo "Warning: root takes precedence over netroot. Ignoring netroot"
fi
netroot=$root
# if root is not specified try to mount the whole iSCSI LUN
printf 'ENV{DEVTYPE}!="partition", SYMLINK=="disk/by-path/*-iscsi-*-*", SYMLINK+="root"\n' >> /etc/udev/rules.d/99-iscsi-root.rules
[ -n "$DRACUT_SYSTEMD" ] && systemctl is-active systemd-udevd && udevadm control --reload-rules
root=/dev/root
write_fs_tab /dev/root
fi
# If it's not empty or iscsi we don't continue
for nroot in $(getargs netroot); do
[ "${nroot%%:*}" = "iscsi" ] || continue
netroot="$nroot"
break
done
# Root takes precedence over netroot
if [ "${root}" = "/dev/root" ] && getarg "netroot=dhcp" ; then
# if root is not specified try to mount the whole iSCSI LUN
printf 'ENV{DEVTYPE}!="partition", SYMLINK=="disk/by-path/*-iscsi-*-*", SYMLINK+="root"\n' >> /etc/udev/rules.d/99-iscsi-root.rules
[ -n "$DRACUT_SYSTEMD" ] && systemctl is-active systemd-udevd && udevadm control --reload-rules
fi
if [ -n "$iscsiroot" ] ; then
[ -z "$netroot" ] && netroot=$root
# @deprecated
echo "Warning: Argument iscsiroot is deprecated and might be removed in a future"
echo "release. See 'man dracut.kernel' for more information."
# Accept iscsiroot argument?
[ -z "$netroot" ] || [ "$netroot" = "iscsi" ] || \
die "Argument iscsiroot only accepted for empty root= or [net]root=iscsi"
# Override root with iscsiroot content?
[ -z "$netroot" ] || [ "$netroot" = "iscsi" ] && netroot=iscsi:$iscsiroot
fi
# iscsi_firmware does not need argument checking
if [ -n "$iscsi_firmware" ]; then
if [ "$root" != "dhcp" ] && [ "$netroot" != "dhcp" ]; then
[ -z "$netroot" ] && netroot=iscsi:
fi
modprobe -b -q iscsi_boot_sysfs 2>/dev/null
modprobe -b -q iscsi_ibft
# if no ip= is given, but firmware
echo "${DRACUT_SYSTEMD+systemctl is-active initrd-root-device.target || }[ -f '/tmp/iscsistarted-firmware' ]" > $hookdir/initqueue/finished/iscsi_started.sh
initqueue --unique --online /sbin/iscsiroot online "iscsi:" "$NEWROOT"
initqueue --unique --onetime --timeout /sbin/iscsiroot timeout "iscsi:" "$NEWROOT"
initqueue --unique --onetime --settled /sbin/iscsiroot online "iscsi:" "'$NEWROOT'"
fi
# ISCSI actually supported?
if ! [ -e /sys/module/iscsi_tcp ]; then
modprobe -b -q iscsi_tcp || die "iscsiroot requested but kernel/initrd does not support iscsi"
fi
modprobe --all -b -q qla4xxx cxgb3i cxgb4i bnx2i be2iscsi
if [ -n "$netroot" ] && [ "$root" != "/dev/root" ] && [ "$root" != "dhcp" ]; then
if ! getargbool 1 rd.neednet >/dev/null || ! getarg "ip="; then
initqueue --unique --onetime --settled /sbin/iscsiroot dummy "'$netroot'" "'$NEWROOT'"
fi
fi
if arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=) && [ -n "$arg" ] && ! [ -f /run/initiatorname.iscsi ] ; then
iscsi_initiator=$arg
echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
ln -fs /run/initiatorname.iscsi /dev/.initiatorname.iscsi
rm -f /etc/iscsi/initiatorname.iscsi
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
if [ -n "$DRACUT_SYSTEMD" ]; then
systemctl try-restart iscsid
# FIXME: iscsid is not yet ready, when the service is :-/
sleep 1
fi
fi
# If not given on the cmdline and initiator-name available via iBFT
if [ -z $iscsi_initiator ] && [ -f /sys/firmware/ibft/initiator/initiator-name ] && ! [ -f /tmp/iscsi_set_initiator ]; then
iscsi_initiator=$(while read line || [ -n "$line" ]; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name)
if [ -n "$iscsi_initiator" ]; then
echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
rm -f /etc/iscsi/initiatorname.iscsi
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
> /tmp/iscsi_set_initiator
if [ -n "$DRACUT_SYSTEMD" ]; then
systemctl try-restart iscsid
# FIXME: iscsid is not yet ready, when the service is :-/
sleep 1
fi
fi
fi
if [ -z "$netroot" ] || ! [ "${netroot%%:*}" = "iscsi" ]; then
return 1
fi
initqueue --unique --onetime --timeout /sbin/iscsiroot timeout "$netroot" "$NEWROOT"
for nroot in $(getargs netroot); do
[ "${nroot%%:*}" = "iscsi" ] || continue
type parse_iscsi_root >/dev/null 2>&1 || . /lib/net-lib.sh
parse_iscsi_root "$nroot" || return 1
netroot_enc=$(str_replace "$nroot" '/' '\2f')
echo "${DRACUT_SYSTEMD+systemctl is-active initrd-root-device.target || }[ -f '/tmp/iscsistarted-$netroot_enc' ]" > $hookdir/initqueue/finished/iscsi_started.sh
done
# Done, all good!
rootok=1
# Shut up init error check
[ -z "$root" ] && root="iscsi"
PK �5�Z�q"�L L 95iscsi/mount-lun.shnu ȯ�� #!/bin/sh
if [ -z $iscsi_lun ]; then
iscsi_lun=0
fi
NEWROOT=${NEWROOT:-"/sysroot"}
for disk in /dev/disk/by-path/*-iscsi-*-$iscsi_lun; do
if mount -t ${fstype:-auto} -o "$rflags" $disk $NEWROOT; then
if [ ! -d $NEWROOT/proc ]; then
umount $disk
continue
fi
break
fi
done
PK �5�Z���o�) �) 95iscsi/iscsiroot.shnu ȯ�� #!/bin/sh
#
# This implementation is incomplete: Discovery mode is not implemented and
# the argument handling doesn't follow currently agreed formats. This is mainly
# because rfc4173 does not say anything about iscsi_initiator but open-iscsi's
# iscsistart needs this.
#
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type parse_iscsi_root >/dev/null 2>&1 || . /lib/net-lib.sh
type write_fs_tab >/dev/null 2>&1 || . /lib/fs-lib.sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
# Huh? Empty $1?
[ -z "$1" ] && exit 1
# Huh? Empty $2?
[ -z "$2" ] && exit 1
# Huh? Empty $3? This isn't really necessary, since NEWROOT isn't
# used here. But let's be consistent
[ -z "$3" ] && exit 1
# root is in the form root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
netif="$1"
iroot="$2"
# If it's not iscsi we don't continue
[ "${iroot%%:*}" = "iscsi" ] || exit 1
iroot=${iroot#iscsi}
iroot=${iroot#:}
# XXX modprobe crc32c should go in the cmdline parser, but I haven't yet
# figured out a way how to check whether this is built-in or not
modprobe crc32c 2>/dev/null
if [ -z "${DRACUT_SYSTEMD}" ] && [ -e /sys/module/bnx2i ] && ! [ -e /tmp/iscsiuio-started ]; then
iscsiuio
> /tmp/iscsiuio-started
fi
handle_firmware()
{
local ifaces retry
# Depending on the 'ql4xdisablesysfsboot' qla4xxx
# will be autostarting sessions without presenting
# them via the firmware interface.
# In these cases 'iscsiadm -m fw' will fail, but
# the iSCSI sessions will still be present.
if ! iscsiadm -m fw; then
warn "iscsiadm: Could not get list of targets from firmware."
else
ifaces=$(set -- /sys/firmware/ibft/ethernet*; echo $#)
retry=$(cat /tmp/session-retry)
if [ $retry -lt $ifaces ]; then
retry=$((retry+1))
echo $retry > /tmp/session-retry
return 1
else
rm /tmp/session-retry
fi
if ! iscsiadm -m fw -l; then
warn "iscsiadm: Log-in to iscsi target failed"
else
need_shutdown
fi
fi
[ -d /sys/class/iscsi_session ] || return 1
echo 'started' > "/tmp/iscsistarted-iscsi:"
echo 'started' > "/tmp/iscsistarted-firmware"
return 0
}
handle_netroot()
{
local iscsi_initiator iscsi_target_name iscsi_target_ip iscsi_target_port
local iscsi_target_group iscsi_protocol iscsirw iscsi_lun
local iscsi_username iscsi_password
local iscsi_in_username iscsi_in_password
local iscsi_iface_name iscsi_netdev_name
local iscsi_param param
local p found
local login_retry_max_seen=
# override conf settings by command line options
arg=$(getarg rd.iscsi.initiator -d iscsi_initiator=)
[ -n "$arg" ] && iscsi_initiator=$arg
arg=$(getarg rd.iscsi.target.group -d iscsi_target_group=)
[ -n "$arg" ] && iscsi_target_group=$arg
arg=$(getarg rd.iscsi.username -d iscsi_username=)
[ -n "$arg" ] && iscsi_username=$arg
arg=$(getarg rd.iscsi.password -d iscsi_password)
[ -n "$arg" ] && iscsi_password=$arg
arg=$(getarg rd.iscsi.in.username -d iscsi_in_username=)
[ -n "$arg" ] && iscsi_in_username=$arg
arg=$(getarg rd.iscsi.in.password -d iscsi_in_password=)
[ -n "$arg" ] && iscsi_in_password=$arg
for p in $(getargs rd.iscsi.param -d iscsi_param); do
[ "${p%=*}" = node.session.initial_login_retry_max ] && \
login_retry_max_seen=yes
iscsi_param="$iscsi_param $p"
done
# this sets iscsi_target_name and possibly overwrites most
# parameters read from the command line above
parse_iscsi_root "$1" || return 1
# Bail out early, if there is no route to the destination
if is_ip "$iscsi_target_ip" && [ "$netif" != "timeout" ] && ! all_ifaces_setup && getargbool 1 rd.iscsi.testroute; then
ip route get "$iscsi_target_ip" >/dev/null 2>&1 || return 0
fi
#limit iscsistart login retries
if [ "$login_retry_max_seen" != yes ]; then
retries=$(getargnum 3 0 10000 rd.iscsi.login_retry_max)
if [ $retries -gt 0 ]; then
iscsi_param="${iscsi_param% } node.session.initial_login_retry_max=$retries"
fi
fi
# XXX is this needed?
getarg ro && iscsirw=ro
getarg rw && iscsirw=rw
fsopts=${fsopts:+$fsopts,}${iscsirw}
if [ -z "$iscsi_initiator" ] && [ -f /sys/firmware/ibft/initiator/initiator-name ] && ! [ -f /tmp/iscsi_set_initiator ]; then
iscsi_initiator=$(while read line || [ -n "$line" ]; do echo $line;done < /sys/firmware/ibft/initiator/initiator-name)
echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
rm -f /etc/iscsi/initiatorname.iscsi
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
> /tmp/iscsi_set_initiator
if [ -n "$DRACUT_SYSTEMD" ]; then
systemctl try-restart iscsid
# FIXME: iscsid is not yet ready, when the service is :-/
sleep 1
fi
fi
if [ -z "$iscsi_initiator" ]; then
[ -f /run/initiatorname.iscsi ] && . /run/initiatorname.iscsi
[ -f /etc/initiatorname.iscsi ] && . /etc/initiatorname.iscsi
[ -f /etc/iscsi/initiatorname.iscsi ] && . /etc/iscsi/initiatorname.iscsi
iscsi_initiator=$InitiatorName
fi
if [ -z "$iscsi_initiator" ]; then
iscsi_initiator=$(iscsi-iname)
echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
rm -f /etc/iscsi/initiatorname.iscsi
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
> /tmp/iscsi_set_initiator
if [ -n "$DRACUT_SYSTEMD" ]; then
systemctl try-restart iscsid
# FIXME: iscsid is not yet ready, when the service is :-/
sleep 1
fi
fi
if [ -z "$iscsi_target_port" ]; then
iscsi_target_port=3260
fi
if [ -z "$iscsi_target_group" ]; then
iscsi_target_group=1
fi
if [ -z "$iscsi_lun" ]; then
iscsi_lun=0
fi
echo "InitiatorName=$iscsi_initiator" > /run/initiatorname.iscsi
ln -fs /run/initiatorname.iscsi /dev/.initiatorname.iscsi
if ! [ -e /etc/iscsi/initiatorname.iscsi ]; then
mkdir -p /etc/iscsi
ln -fs /run/initiatorname.iscsi /etc/iscsi/initiatorname.iscsi
if [ -n "$DRACUT_SYSTEMD" ]; then
systemctl try-restart iscsid
# FIXME: iscsid is not yet ready, when the service is :-/
sleep 1
fi
fi
if [ -z "$DRACUT_SYSTEMD" ]; then
iscsid
sleep 2
fi
# FIXME $iscsi_protocol??
if [ "$root" = "dhcp" ] || [ "$netroot" = "dhcp" ]; then
# if root is not specified try to mount the whole iSCSI LUN
printf 'SYMLINK=="disk/by-path/*-iscsi-*-%s", SYMLINK+="root"\n' "$iscsi_lun" >> /etc/udev/rules.d/99-iscsi-root.rules
udevadm control --reload
write_fs_tab /dev/root
wait_for_dev -n /dev/root
# install mount script
[ -z "$DRACUT_SYSTEMD" ] && \
echo "iscsi_lun=$iscsi_lun . /bin/mount-lun.sh " > $hookdir/mount/01-$$-iscsi.sh
fi
targets=$(iscsiadm -m discovery -t st -p $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} | sed 's/^.*iqn/iqn/')
[ -z "$targets" ] && echo "Target discovery to $iscsi_target_ip:${iscsi_target_port:+$iscsi_target_port} failed with status $?" && return 1
found=
for target in $targets; do
if [ "$target" = "$iscsi_target_name" ]; then
if [ -n "$iscsi_iface_name" ]; then
iscsiadm -m iface -I $iscsi_iface_name --op=new
EXTRA=" ${iscsi_netdev_name:+--name=iface.net_ifacename --value=$iscsi_netdev_name} "
EXTRA="$EXTRA ${iscsi_initiator:+--name=iface.initiatorname --value=$iscsi_initiator} "
fi
[ -n "$iscsi_param" ] && for param in $iscsi_param; do EXTRA="$EXTRA --name=${param%=*} --value=${param#*=}"; done
CMD="iscsiadm -m node -T $target \
${iscsi_iface_name:+-I $iscsi_iface_name} \
-p $iscsi_target_ip${iscsi_target_port:+:$iscsi_target_port}"
__op="--op=update \
--name=node.startup --value=onboot \
${iscsi_username:+ --name=node.session.auth.username --value=$iscsi_username} \
${iscsi_password:+ --name=node.session.auth.password --value=$iscsi_password} \
${iscsi_in_username:+--name=node.session.auth.username_in --value=$iscsi_in_username} \
${iscsi_in_password:+--name=node.session.auth.password_in --value=$iscsi_in_password} \
$EXTRA \
$NULL"
$CMD $__op
if [ "$netif" != "timeout" ]; then
$CMD --login
fi
found=yes
break
fi
done
if [ "$netif" = "timeout" ]; then
iscsiadm -m node -L onboot || :
elif [ "$found" != yes ]; then
warn "iSCSI target \"$iscsi_target_name\" not found on portal $iscsi_target_ip:$iscsi_target_port"
return 1
fi
> $hookdir/initqueue/work
netroot_enc=$(str_replace "$1" '/' '\2f')
echo 'started' > "/tmp/iscsistarted-iscsi:${netroot_enc}"
return 0
}
ret=0
if [ "$netif" != "timeout" ] && getargbool 0 rd.iscsi.waitnet; then
all_ifaces_setup || exit 0
fi
if [ "$netif" = "timeout" ] && all_ifaces_setup; then
# s.th. went wrong and the timeout script hits
# restart
systemctl restart iscsid
# damn iscsid is not ready after unit says it's ready
sleep 2
fi
if getargbool 0 rd.iscsi.firmware -d -y iscsi_firmware ; then
if [ "$netif" = "timeout" ] || [ "$netif" = "online" ] || [ "$netif" = "dummy" ]; then
[ -f /tmp/session-retry ] || echo 1 > /tmp/session-retry
handle_firmware
ret=$?
fi
fi
if ! [ "$netif" = "online" ]; then
# loop over all netroot parameter
if nroot=$(getarg netroot) && [ "$nroot" != "dhcp" ]; then
for nroot in $(getargs netroot); do
[ "${nroot%%:*}" = "iscsi" ] || continue
nroot="${nroot##iscsi:}"
if [ -n "$nroot" ]; then
handle_netroot "$nroot"
ret=$(($ret + $?))
fi
done
else
if [ -n "$iroot" ]; then
handle_netroot "$iroot"
ret=$?
fi
fi
fi
need_shutdown
# now we have a root filesystem somewhere in /dev/sd*
# let the normal block handler handle root=
exit $ret
PK �5�Z�ԋb{ { 35network-manager/nm-lib.shnu �[��� #!/bin/bash
type getcmdline >/dev/null 2>&1 || . /lib/dracut-lib.sh
nm_generate_connections()
{
rm -f /run/NetworkManager/system-connections/*
/usr/libexec/nm-initrd-generator -- $(getcmdline)
if getargbool 0 rd.neednet; then
for i in /usr/lib/NetworkManager/system-connections/* \
/run/NetworkManager/system-connections/* \
/etc/NetworkManager/system-connections/* \
/etc/sysconfig/network-scripts/ifcfg-*; do
[ -f "$i" ] || continue
echo '[ -f /tmp/nm.done ]' >$hookdir/initqueue/finished/nm.sh
break
done
fi
}
PK �5�ZXӊ5 5 ! 35network-manager/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
local _program
require_binaries sed grep || return 1
# do not add this module by default
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
installkernel() {
return 0
}
# called by dracut
install() {
local _nm_version
_nm_version=$(NetworkManager --version)
# We don't need `ip` but having it is *really* useful for people debugging
# in an emergency shell.
inst_multiple ip sed grep
inst NetworkManager
inst /usr/libexec/nm-initrd-generator
inst_multiple -o teamd dhclient
inst_hook cmdline 99 "$moddir/nm-config.sh"
inst_hook initqueue/settled 99 "$moddir/nm-run.sh"
inst_rules 85-nm-unmanaged.rules
inst_libdir_file "NetworkManager/$_nm_version/libnm-device-plugin-team.so"
inst_simple "$moddir/nm-lib.sh" "/lib/nm-lib.sh"
if [[ -x "$initdir/usr/sbin/dhclient" ]]; then
inst /usr/libexec/nm-dhcp-helper
elif ! [[ -e "$initdir/etc/machine-id" ]]; then
# The internal DHCP client silently fails if we
# have no machine-id
systemd-machine-id-setup --root="$initdir"
fi
# We don't install the ifcfg files from the host automatically.
# But the user might choose to include them, so we pull in the machinery to read them.
inst_libdir_file "NetworkManager/$_nm_version/libnm-settings-plugin-ifcfg-rh.so"
_arch=${DRACUT_ARCH:-$(uname -m)}
inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*" \
{"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*"
}
PK �5�Z��� 35network-manager/nm-run.shnu ȯ�� #!/bin/sh
for i in /usr/lib/NetworkManager/system-connections/* \
/run/NetworkManager/system-connections/* \
/etc/NetworkManager/system-connections/* \
/etc/sysconfig/network-scripts/ifcfg-*; do
[ -f "$i" ] || continue
if getargbool 0 rd.debug -d -y rdinitdebug -d -y rdnetdebug; then
/usr/sbin/NetworkManager --configure-and-quit=initrd --debug --log-level=trace
else
/usr/sbin/NetworkManager --configure-and-quit=initrd --no-daemon
fi
if [ -s /run/NetworkManager/initrd/hostname ]; then
cat /run/NetworkManager/initrd/hostname > /proc/sys/kernel/hostname
fi
break
done
for _i in /sys/class/net/*
do
state=/run/NetworkManager/devices/$(cat $_i/ifindex)
grep -q connection-uuid= $state 2>/dev/null || continue
ifname=${_i##*/}
sed -n 's/root-path/new_root_path/p;s/next-server/new_next_server/p;s/dhcp-bootfile/filename/p' <$state >/tmp/dhclient.$ifname.dhcpopts
source_hook initqueue/online $ifname
/sbin/netroot $ifname
done
> /tmp/nm.done
PK �5�Z+ D� � 35network-manager/nm-config.shnu ȯ�� #!/bin/sh
type nm_generate_connections >/dev/null 2>&1 || . /lib/nm-lib.sh
if [ -n "$netroot" ] || [ -e /tmp/net.ifaces ]; then
echo rd.neednet >> /etc/cmdline.d/35-neednet.conf
fi
nm_generate_connections
PK �5�Z��� � ! 90multipath/multipath-shutdown.shnu ȯ�� #!/bin/bash
for i in $(multipath -l -v1); do
if ! dmsetup table $i | sed -n '/.*queue_if_no_path.*/q1' ; then
dmsetup message $i 0 fail_if_no_path
fi
done
PK �5�Z��d �
�
90multipath/module-setup.shnu ȯ�� #!/bin/bash
is_mpath() {
local _dev=$1
[ -e /sys/dev/block/$_dev/dm/uuid ] || return 1
[[ $(cat /sys/dev/block/$_dev/dm/uuid) =~ mpath- ]] && return 0
return 1
}
majmin_to_mpath_dev() {
local _dev
for i in /dev/mapper/*; do
[[ $i == /dev/mapper/control ]] && continue
_dev=$(get_maj_min $i)
if [ "$_dev" = "$1" ]; then
echo $i
return
fi
done
}
# called by dracut
check() {
local _rootdev
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves is_mpath || return 255
}
# if there's no multipath binary, no go.
require_binaries multipath || return 1
require_binaries kpartx || return 1
return 0
}
# called by dracut
depends() {
echo rootfs-block
echo dm
return 0
}
# called by dracut
cmdline() {
for m in scsi_dh_alua scsi_dh_emc scsi_dh_rdac dm_multipath; do
if grep -m 1 -q "$m" /proc/modules ; then
printf 'rd.driver.pre=%s ' "$m"
fi
done
}
# called by dracut
installkernel() {
local _ret
local _arch=$(uname -m)
local _funcs='scsi_register_device_handler|dm_dirty_log_type_register|dm_register_path_selector|dm_register_target'
local _s390
if [ "$_arch" = "s390" -o "$_arch" = "s390x" ]; then
_s390drivers="=drivers/s390/scsi"
fi
hostonly='' dracut_instmods -o -s "$_funcs" "=drivers/scsi" "=drivers/md" ${_s390drivers:+"$_s390drivers"}
}
# called by dracut
install() {
local _f _allow
add_hostonly_mpath_conf() {
is_mpath $1 && {
local _dev
_dev=$(majmin_to_mpath_dev $1)
[ -z "$_dev" ] && return
strstr "$_allow" "$_dev" && return
_allow="$_allow --allow $_dev"
}
}
inst_multiple -o \
dmsetup \
kpartx \
mpath_wait \
mpathconf \
mpathpersist \
multipath \
multipathd \
xdrgetprio \
xdrgetuid \
/etc/xdrdevices.conf \
/etc/multipath.conf \
/etc/multipath/* \
/etc/multipath/conf.d/*
[[ $hostonly ]] && [[ $hostonly_mode = "strict" ]] && {
for_each_host_dev_and_slaves_all add_hostonly_mpath_conf
[ -n "$_allow" ] && mpathconf $_allow --outfile ${initdir}/etc/multipath.conf
}
inst $(command -v partx) /sbin/partx
inst_libdir_file "libmultipath*" "multipath/*"
inst_libdir_file 'libgcc_s.so*'
if [[ $hostonly_cmdline ]] ; then
local _conf=$(cmdline)
[[ $_conf ]] && echo "$_conf" >> "${initdir}/etc/cmdline.d/90multipath.conf"
fi
if dracut_module_included "systemd"; then
inst_simple "${moddir}/multipathd-configure.service" "${systemdsystemunitdir}/multipathd-configure.service"
inst_simple "${moddir}/multipathd.service" "${systemdsystemunitdir}/multipathd.service"
systemctl -q --root "$initdir" enable multipathd-configure.service
systemctl -q --root "$initdir" enable multipathd.service
else
inst_hook pre-trigger 02 "$moddir/multipathd.sh"
inst_hook cleanup 02 "$moddir/multipathd-stop.sh"
fi
inst_hook cleanup 80 "$moddir/multipathd-needshutdown.sh"
inst_hook shutdown 20 "$moddir/multipath-shutdown.sh"
inst_rules 40-multipath.rules 56-multipath.rules \
62-multipath.rules 65-multipath.rules \
66-kpartx.rules 67-kpartx-compat.rules \
11-dm-mpath.rules 11-dm-parts.rules
}
PK �5�ZS&,�� � 90multipath/multipathd.shnu ȯ�� #!/bin/sh
if [ "$(getarg rd.multipath)" = "default" ] && [ ! -e /etc/multipath.conf ]; then
mkdir -p /etc/multipath/multipath.conf.d
mpathconf --enable
fi
if getargbool 1 rd.multipath -d -n rd_NO_MULTIPATH && [ -e /etc/multipath.conf ]; then
modprobe dm-multipath
multipathd -B || multipathd
need_shutdown
else
rm -- /etc/udev/rules.d/??-multipath.rules 2>/dev/null
fi
PK �5�Z��BMp p ( 90multipath/multipathd-configure.servicenu �[��� [Unit]
Description=Device-Mapper Multipath Default Configuration
Before=iscsi.service iscsid.service lvm2-activation-early.service
Wants=systemd-udev-trigger.service systemd-udev-settle.service local-fs-pre.target
After=systemd-udev-trigger.service systemd-udev-settle.service
Before=local-fs-pre.target multipathd.service
DefaultDependencies=no
Conflicts=shutdown.target
ConditionKernelCommandLine=rd.multipath=default
ConditionPathExists=!/etc/multipath.conf
[Service]
Type=oneshot
ExecStartPre=-/usr/bin/mkdir -p /etc/multipath/multipath.conf.d
ExecStart=/usr/sbin/mpathconf --enable
[Install]
WantedBy=sysinit.target
PK �5�Zgþ 90multipath/multipathd.servicenu �[��� [Unit]
Description=Device-Mapper Multipath Device Controller
Before=iscsi.service iscsid.service lvm2-activation-early.service
Wants=systemd-udev-trigger.service systemd-udev-settle.service local-fs-pre.target
After=systemd-udev-trigger.service systemd-udev-settle.service
Before=local-fs-pre.target
Before=initrd-cleanup.service
DefaultDependencies=no
Conflicts=shutdown.target
Conflicts=initrd-cleanup.service
ConditionKernelCommandLine=!nompath
ConditionKernelCommandLine=!rd.multipath=0
ConditionKernelCommandLine=!rd_NO_MULTIPATH
ConditionKernelCommandLine=!multipath=off
[Service]
Type=simple
ExecStartPre=-/sbin/modprobe dm-multipath
ExecStart=/sbin/multipathd -s -d
ExecReload=/sbin/multipathd reconfigure
ExecStop=/sbin/multipathd shutdown
[Install]
WantedBy=sysinit.target
PK �5�Z%!�� � 90multipath/multipathd-stop.shnu ȯ�� #!/bin/sh
if [ -e /etc/multipath.conf ]; then
HARD=""
while pidof multipathd >/dev/null 2>&1; do
for pid in $(pidof multipathd); do
kill $HARD $pid >/dev/null 2>&1
done
HARD="-9"
done
fi
PK �5�Z�DF� � & 90multipath/multipathd-needshutdown.shnu ȯ�� #!/bin/sh
for i in $(multipath -l -v1); do
if $(dmsetup table $i | sed -n '/.*queue_if_no_path.*/q1') ; then
need_shutdown
break
fi
done
PK �5�ZN��I I 99shutdown/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
return 0
}
# called by dracut
depends() {
echo base
return 0
}
# called by dracut
install() {
local _d
inst_multiple umount poweroff reboot halt losetup stat sleep
inst_multiple -o kexec
inst "$moddir/shutdown.sh" "$prefix/shutdown"
[ -e "${initdir}/lib" ] || mkdir -m 0755 -p ${initdir}/lib
mkdir -m 0755 -p ${initdir}/lib/dracut
mkdir -m 0755 -p ${initdir}/lib/dracut/hooks
for _d in $hookdirs shutdown shutdown-emergency; do
mkdir -m 0755 -p ${initdir}/lib/dracut/hooks/$_d
done
}
PK �5�Z�u��6 6 99shutdown/shutdown.shnu ȯ�� #!/bin/sh
#
# Licensed under the GPLv2
#
# Copyright 2011, Red Hat, Inc.
# Harald Hoyer <harald@redhat.com>
ACTION="$1"
[ -w /dev/console ] && exec </dev/console >>/dev/console 2>>/dev/console
export TERM=linux
export PATH=/usr/sbin:/usr/bin:/sbin:/bin
. /lib/dracut-lib.sh
if [ "$(stat -c '%T' -f /)" = "tmpfs" ]; then
mount -o remount,rw /
fi
mkdir /oldsys
for i in sys proc run dev; do
mkdir /oldsys/$i
mount --move /oldroot/$i /oldsys/$i
done
# if "kexec" was installed after creating the initramfs, we try to copy it from the real root
# libz normally is pulled in via kmod/modprobe and udevadm
if [ "$ACTION" = "kexec" ] && ! command -v kexec >/dev/null 2>&1; then
for p in /usr/sbin /usr/bin /sbin /bin; do
cp -a /oldroot/${p}/kexec $p >/dev/null 2>&1 && break
done
hash kexec
fi
trap "emergency_shell --shutdown shutdown Signal caught!" 0
getarg 'rd.break=pre-shutdown' && emergency_shell --shutdown pre-shutdown "Break before pre-shutdown"
source_hook pre-shutdown
warn "Killing all remaining processes"
killall_proc_mountpoint /oldroot || sleep 0.2
umount_a() {
local _did_umount="n"
while read a mp a || [ -n "$mp" ]; do
if strstr "$mp" oldroot; then
if umount "$mp"; then
_did_umount="y"
warn "Unmounted $mp."
fi
fi
done </proc/mounts
losetup -D
[ "$_did_umount" = "y" ] && return 0
return 1
}
_cnt=0
while [ $_cnt -le 40 ]; do
umount_a 2>/dev/null || break
_cnt=$(($_cnt+1))
done
[ $_cnt -ge 40 ] && umount_a
if strstr "$(cat /proc/mounts)" "/oldroot"; then
warn "Cannot umount /oldroot"
for _pid in /proc/*; do
_pid=${_pid##/proc/}
case $_pid in
*[!0-9]*) continue;;
esac
[ $_pid -eq $$ ] && continue
[ -e "/proc/$_pid/exe" ] || continue
[ -e "/proc/$_pid/root" ] || continue
if strstr "$(ls -l /proc/$_pid /proc/$_pid/fd 2>/dev/null)" "oldroot"; then
warn "Blocking umount of /oldroot [$_pid] $(cat /proc/$_pid/cmdline)"
else
warn "Still running [$_pid] $(cat /proc/$_pid/cmdline)"
fi
ls -l "/proc/$_pid/exe" 2>&1 | vwarn
ls -l "/proc/$_pid/fd" 2>&1 | vwarn
done
fi
_check_shutdown() {
local __f
local __s=0
for __f in $hookdir/shutdown/*.sh; do
[ -e "$__f" ] || continue
( . "$__f" $1 )
if [ $? -eq 0 ]; then
rm -f -- $__f
else
__s=1
fi
done
return $__s
}
_cnt=0
while [ $_cnt -le 40 ]; do
_check_shutdown && break
_cnt=$(($_cnt+1))
done
[ $_cnt -ge 40 ] && _check_shutdown final
getarg 'rd.break=shutdown' && emergency_shell --shutdown shutdown "Break before shutdown"
case "$ACTION" in
reboot|poweroff|halt)
$ACTION -f -d -n
warn "$ACTION failed!"
;;
kexec)
kexec -e
warn "$ACTION failed!"
reboot -f -d -n
;;
*)
warn "Shutdown called with argument '$ACTION'. Rebooting!"
reboot -f -d -n
;;
esac
emergency_shell --shutdown shutdown
PK �5�Z�� �� � 90kernel-modules/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
installkernel() {
local _blockfuncs='ahci_platform_get_resources|ata_scsi_ioctl|scsi_add_host|blk_cleanup_queue|register_mtd_blktrans|scsi_esp_register|register_virtio_device|usb_stor_disconnect|mmc_add_host|sdhci_add_host|scsi_add_host_with_dma'
find_kernel_modules_external () {
local _OLDIFS
local external_pattern="^/"
[[ -f "$srcmods/modules.dep" ]] || return 0
_OLDIFS=$IFS
IFS=:
while read a rest; do
[[ $a =~ $external_pattern ]] || continue
printf "%s\n" "$a"
done < "$srcmods/modules.dep"
IFS=$_OLDIFS
}
is_block_dev() {
[ -e /sys/dev/block/$1 ] && return 0
return 1
}
install_block_modules () {
hostonly='' instmods sr_mod sd_mod scsi_dh ata_piix
instmods \
scsi_dh_rdac scsi_dh_emc scsi_dh_alua \
=ide nvme vmd nfit \
virtio_blk
dracut_instmods -o -s "${_blockfuncs}" "=drivers"
}
if [[ -z $drivers ]]; then
hostonly='' instmods \
hid_generic unix \
ehci-hcd ehci-pci ehci-platform \
ohci-hcd ohci-pci \
uhci-hcd \
xhci-hcd xhci-pci xhci-plat-hcd \
"=drivers/pinctrl" \
${NULL}
hostonly=$(optional_hostonly) instmods \
"=drivers/hid" \
"=drivers/tty/serial" \
"=drivers/input/serio" \
"=drivers/input/keyboard" \
"=drivers/usb/storage" \
"=drivers/pci/host" \
${NULL}
instmods \
yenta_socket \
atkbd i8042 usbhid firewire-ohci pcmcia hv-vmbus \
virtio virtio_ring virtio_pci virtio_scsi pci_hyperv \
"=drivers/pcmcia"
if [[ "$(uname -m)" == arm* || "$(uname -m)" == aarch64 ]]; then
# arm/aarch64 specific modules
_blockfuncs+='|dw_mc_probe|dw_mci_pltfm_register'
instmods \
"=drivers/clk" \
"=drivers/dma" \
"=drivers/extcon" \
"=drivers/gpio" \
"=drivers/hwspinlock" \
"=drivers/i2c/busses" \
"=drivers/mfd" \
"=drivers/mmc/core" \
"=drivers/phy" \
"=drivers/power" \
"=drivers/regulator" \
"=drivers/rpmsg" \
"=drivers/rtc" \
"=drivers/soc" \
"=drivers/usb/chipidea" \
"=drivers/usb/dwc2" \
"=drivers/usb/dwc3" \
"=drivers/usb/host" \
"=drivers/usb/misc" \
"=drivers/usb/musb" \
"=drivers/usb/phy" \
"=drivers/scsi/hisi_sas" \
${NULL}
fi
find_kernel_modules_external | instmods
if ! [[ $hostonly ]] || for_each_host_dev_and_slaves is_block_dev; then
install_block_modules
fi
# if not on hostonly mode, install all known filesystems,
# if the required list is not set via the filesystems variable
if ! [[ $hostonly ]]; then
if [[ -z $filesystems ]]; then
dracut_instmods -o -P ".*/(kernel/fs/nfs|kernel/fs/nfsd|kernel/fs/lockd)/.*" '=fs'
fi
elif [[ "${host_fs_types[*]}" ]]; then
hostonly='' instmods "${host_fs_types[@]}"
fi
fi
:
}
# called by dracut
install() {
inst_multiple -o /lib/modprobe.d/*.conf
[[ $hostonly ]] && inst_multiple -H -o /etc/modprobe.d/*.conf /etc/modprobe.conf
if ! dracut_module_included "systemd"; then
inst_hook cmdline 01 "$moddir/parse-kernel.sh"
fi
inst_simple "$moddir/insmodpost.sh" /sbin/insmodpost.sh
}
PK �5�ZL�� � 90kernel-modules/parse-kernel.shnu ȯ�� #!/bin/sh
_modprobe_d=/etc/modprobe.d
if [ -d /usr/lib/modprobe.d ] ; then
_modprobe_d=/usr/lib/modprobe.d
elif [ -d /lib/modprobe.d ] ; then
_modprobe_d=/lib/modprobe.d
elif [ ! -d $_modprobe_d ] ; then
mkdir -p $_modprobe_d
fi
for i in $(getargs rd.driver.pre -d rdloaddriver=); do
(
IFS=,
for p in $i; do
modprobe $p 2>&1 | vinfo
done
)
done
[ -d /etc/modprobe.d ] || mkdir -p /etc/modprobe.d
for i in $(getargs rd.driver.blacklist -d rdblacklist=); do
(
IFS=,
for p in $i; do
echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf
done
)
done
for p in $(getargs rd.driver.post -d rdinsmodpost=); do
echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf
_do_insmodpost=1
done
[ -n "$_do_insmodpost" ] && initqueue --settled --unique --onetime insmodpost.sh
unset _do_insmodpost _modprobe_d
PK �5�Z��?� � 90kernel-modules/insmodpost.shnu ȯ�� #!/bin/sh
. /lib/dracut-lib.sh
for modlist in $(getargs rd.driver.post -d rdinsmodpost=); do
(
IFS=,
for m in $modlist; do
modprobe $m
done
)
done
PK �5�Z&U�>p p 99memstrack/module-setup.shnu ȯ�� #!/usr/bin/bash
check() {
if find_binary memstrack >/dev/null; then
dinfo "memstrack is available"
return 0
fi
dinfo "memstrack is not available"
dinfo "If you need to use rd.memdebug>=4, please install memstrack"
return 1
}
depends() {
return 0
}
install() {
inst "/bin/memstrack" "/bin/memstrack"
inst "$moddir/memstrack-start.sh" "/bin/memstrack-start"
inst_hook cleanup 99 "$moddir/memstrack-report.sh"
inst "$moddir/memstrack.service" "$systemdsystemunitdir/memstrack.service"
systemctl -q --root "$initdir" add-wants initrd.target memstrack.service
}
PK �5�ZC�� 99memstrack/memstrack-start.shnu ȯ�� #!/bin/sh
# Mount kernel debug fs so debug tools can work.
# memdebug=4 and memdebug=5 requires debug fs to be mounted.
# And there is no need to umount it.
type getargnum >/dev/null 2>&1 || . /lib/dracut-lib.sh
# "sys/kernel/tracing" has the priority if exists.
get_trace_base() {
# trace access through debugfs would be obsolete if "/sys/kernel/tracing" is available.
if [ -d "/sys/kernel/tracing" ]; then
echo "/sys/kernel"
else
echo "/sys/kernel/debug"
fi
}
is_debugfs_ready() {
[ -f "$(get_trace_base)/tracing/trace" ]
}
prepare_debugfs() {
local trace_base
trace_base=$(get_trace_base)
# old debugfs interface case.
if ! [ -d "$trace_base/tracing" ]; then
mount none -t debugfs $trace_base
# new tracefs interface case.
elif ! [ -f "$trace_base/tracing/trace" ]; then
mount none -t tracefs "$trace_base/tracing"
fi
if ! [ -f "$trace_base/tracing/trace" ]; then
echo "WARN: failed to mount debugfs"
return 1
fi
}
if ! is_debugfs_ready ; then
prepare_debugfs
fi
if [ -n "$DEBUG_MEM_LEVEL" ]; then
if [ "$DEBUG_MEM_LEVEL" -ge 5 ]; then
echo "memstrack - will report kernel module memory usage summary and top allocation stack"
memstrack --report module_summary,module_top --notui --throttle 80 -o /.memstrack &
elif [ "$DEBUG_MEM_LEVEL" -ge 4 ]; then
echo "memstrack - will report memory usage summary"
memstrack --report module_summary --notui --throttle 80 -o /.memstrack &
else
exit 0;
fi
fi
PID=$!
RET=$?
if [ $RET -ne 0 ]; then
echo "Failed to start memstrack, exit status: $RET"
exit $RET
fi
# Wait a second for memstrack to setup everything, avoid missing any event
sleep 1
echo $PID > /run/memstrack.pid
disown
PK �5�Z`��B B 99memstrack/memstrack.servicenu �[��� [Unit]
Description=Memstrack Anylazing Service
DefaultDependencies=no
Before=dracut-cmdline.service systemd-udevd.service local-fs-pre.target
IgnoreOnIsolate=true
[Service]
Type=simple
ExecStart=/bin/memstrack-start
PIDFile=/run/memstrack.pid
StandardInput=null
StandardOutput=syslog+console
StandardError=syslog+console
PK �5�Z2� � 99memstrack/memstrack-report.shnu ȯ�� #!/usr/bin/bash
. /lib/dracut-lib.sh
if ! [ "$DEBUG_MEM_LEVEL" -ge 4 ]; then
return 0
fi
if type -P systemctl >/dev/null; then
systemctl stop memstrack.service
else
get_pid_of_tracer () {
local _user _pid _rest
read _user _pid _rest <<< $(ps aux | grep [m]emstrack | head -1)
echo $_pid
}
kill -s INT $(get_pid_of_tracer)
while [[ -n $(get_pid_of_tracer) ]]; do
sleep 1
done
fi
cat /.memstrack
PK �5�Z� U�i i 00bash/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
require_binaries /bin/bash
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
# If another shell is already installed, do not use bash
[[ -x $initdir/bin/sh ]] && return
# Prefer bash as /bin/sh if it is available.
inst /bin/bash && ln -sf bash "${initdir}/bin/sh"
}
PK �5�Z<߆>� � % 71prefixdevname-tools/module-setup.shnu ȯ�� #!/bin/bash
# Include the prefixdevname tools only if this was explicitely requested
check() {
return 255
}
install() {
inst /usr/lib/udev/prefixdevname
inst_rules 71-prefixdevname.rules
}
PK �5�Z%�*�� � 95nbd/nbdroot.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
# Huh? Empty $1?
[ -z "$1" ] && exit 1
# Huh? Empty $2?
[ -z "$2" ] && exit 1
# Huh? Empty $3?
[ -z "$3" ] && exit 1
# root is in the form root=nbd:srv:port[:fstype[:rootflags[:nbdopts]]]
netif="$1"
nroot="$2"
NEWROOT="$3"
# If it's not nbd we don't continue
[ "${nroot%%:*}" = "nbd" ] || return
nroot=${nroot#nbd:}
nbdserver=${nroot%%:*}; nroot=${nroot#*:}
nbdport=${nroot%%:*}; nroot=${nroot#*:}
nbdfstype=${nroot%%:*}; nroot=${nroot#*:}
nbdflags=${nroot%%:*}
nbdopts=${nroot#*:}
if [ "$nbdopts" = "$nbdflags" ]; then
unset nbdopts
fi
if [ "$nbdflags" = "$nbdfstype" ]; then
unset nbdflags
fi
if [ "$nbdfstype" = "$nbdport" ]; then
unset nbdfstype
fi
if [ -z "$nbdfstype" ]; then
nbdfstype=auto
fi
# look through the NBD options and pull out the ones that need to
# go before the host etc. Append a ',' so we know we terminate the loop
nbdopts=${nbdopts},
while [ -n "$nbdopts" ]; do
f=${nbdopts%%,*}
nbdopts=${nbdopts#*,}
if [ -z "$f" ]; then
break
fi
if [ -z "${f%bs=*}" -o -z "${f%timeout=*}" ]; then
preopts="$preopts $f"
continue
fi
opts="$opts $f"
done
# look through the flags and see if any are overridden by the command line
nbdflags=${nbdflags},
while [ -n "$nbdflags" ]; do
f=${nbdflags%%,*}
nbdflags=${nbdflags#*,}
if [ -z "$f" ]; then
break
fi
if [ "$f" = "ro" -o "$f" = "rw" ]; then
nbdrw=$f
continue
fi
fsopts=${fsopts:+$fsopts,}$f
done
getarg ro && nbdrw=ro
getarg rw && nbdrw=rw
fsopts=${fsopts:+$fsopts,}${nbdrw}
# XXX better way to wait for the device to be made?
i=0
while [ ! -b /dev/nbd0 ]; do
[ $i -ge 20 ] && exit 1
if [ $UDEVVERSION -ge 143 ]; then
udevadm settle --exit-if-exists=/dev/nbd0
else
sleep 0.1
fi
i=$(($i + 1))
done
# If we didn't get a root= on the command line, then we need to
# add the udev rules for mounting the nbd0 device
if [ "$root" = "block:/dev/root" -o "$root" = "dhcp" ]; then
printf 'KERNEL=="nbd0", ENV{DEVTYPE}!="partition", ENV{ID_FS_TYPE}=="?*", SYMLINK+="root"\n' >> /etc/udev/rules.d/99-nbd-root.rules
udevadm control --reload
type write_fs_tab >/dev/null 2>&1 || . /lib/fs-lib.sh
write_fs_tab /dev/root "$nbdfstype" "$fsopts"
wait_for_dev -n /dev/root
if [ -z "$DRACUT_SYSTEMD" ]; then
printf '/bin/mount %s\n' \
"$NEWROOT" \
> $hookdir/mount/01-$$-nbd.sh
fi
fi
if strstr "$(nbd-client --help 2>&1)" "systemd-mark"; then
preopts="--systemd-mark $preopts"
fi
if [ "$nbdport" -gt 0 ] 2>/dev/null; then
if [ -z "$DRACUT_SYSTEMD" ]; then
nbd-client "$nbdserver" $nbdport /dev/nbd0 $preopts $opts || exit 1
else
systemd-run --no-block --service-type=forking --quiet \
--description="nbd nbd0" \
-p 'DefaultDependencies=no' \
-p 'KillMode=none' \
--unit="nbd0" -- nbd-client "$nbdserver" $nbdport /dev/nbd0 $preopts $opts >/dev/null 2>&1 || exit 1
fi
else
if [ -z "$DRACUT_SYSTEMD" ]; then
nbd-client -name "$nbdport" "$nbdserver" /dev/nbd0 $preopts $opts || exit 1
else
systemd-run --no-block --service-type=forking --quiet \
--description="nbd nbd0" \
-p 'DefaultDependencies=no' \
-p 'KillMode=none' \
--unit="nbd0" -- nbd-client -name "$nbdport" "$nbdserver" /dev/nbd0 $preopts $opts >/dev/null 2>&1 || exit 1
fi
fi
# NBD doesn't emit uevents when it gets connected, so kick it
echo change > /sys/block/nbd0/uevent
udevadm settle
need_shutdown
exit 0
PK �5�ZB� 95nbd/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
local _rootdev
# if an nbd device is not somewhere in the chain of devices root is
# mounted on, fail the hostonly check.
[[ $hostonly ]] || [[ $mount_needs ]] && {
is_nbd() { [[ -b /dev/block/$1 && $1 == 43:* ]] ;}
_rootdev=$(find_root_block_device)
[[ -b /dev/block/$_rootdev ]] || return 1
check_block_and_slaves is_nbd "$_rootdev" || return 255
}
require_binaries nbd-client || return 1
return 0
}
# called by dracut
depends() {
# We depend on network modules being loaded
echo network rootfs-block
}
# called by dracut
installkernel() {
instmods nbd
}
# called by dracut
install() {
inst nbd-client
inst_hook cmdline 90 "$moddir/parse-nbdroot.sh"
inst_script "$moddir/nbdroot.sh" "/sbin/nbdroot"
if dracut_module_included "systemd-initrd"; then
inst_script "$moddir/nbd-generator.sh" $systemdutildir/system-generators/dracut-nbd-generator
fi
dracut_need_initqueue
}
PK �5�Z�f�� � 95nbd/parse-nbdroot.shnu ȯ�� #!/bin/sh
#
# Preferred format:
# root=nbd:srv:port/exportname[:fstype[:rootflags[:nbdopts]]]
# [root=*] netroot=nbd:srv:port/exportname[:fstype[:rootflags[:nbdopts]]]
#
# nbdopts is a comma separated list of options to give to nbd-client
#
# root= takes precedence over netroot= if root=nbd[...]
#
# Sadly there's no easy way to split ':' separated lines into variables
netroot_to_var() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
unset server port
server=$2; port=$3;
}
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
if [ -z "$netroot" ]; then
for netroot in $(getargs netroot=); do
[ "${netroot%%:*}" = "nbd" ] && break
done
[ "${netroot%%:*}" = "nbd" ] || unset netroot
fi
# Root takes precedence over netroot
if [ "${root%%:*}" = "nbd" ] ; then
if [ -n "$netroot" ] ; then
warn "root takes precedence over netroot. Ignoring netroot"
fi
netroot=$root
unset root
fi
# If it's not nbd we don't continue
[ "${netroot%%:*}" = "nbd" ] || return
if [ -n "${DRACUT_SYSTEMD}" ] && [ "$root" = "dhcp" ]; then
echo "root=$netroot" > /etc/cmdline.d/root.conf
systemctl --no-block daemon-reload
fi
# Check required arguments
netroot_to_var $netroot
[ -z "$server" ] && die "Argument server for nbdroot is missing"
[ -z "$port" ] && die "Argument port for nbdroot is missing"
# NBD actually supported?
incol2 /proc/devices nbd || modprobe nbd || die "nbdroot requested but kernel/initrd does not support nbd"
# Done, all good!
rootok=1
# Shut up init error check
if [ -z "$root" ]; then
root=block:/dev/root
wait_for_dev -n /dev/root
fi
PK �5�ZYӲ�� � 95nbd/nbd-generator.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
[ -z "$root" ] && root=$(getarg root=)
[ "${root%%:*}" = "nbd" ] || exit 0
GENERATOR_DIR="$2"
[ -z "$GENERATOR_DIR" ] && exit 1
[ -d "$GENERATOR_DIR" ] || mkdir "$GENERATOR_DIR"
ROOTFLAGS="$(getarg rootflags)"
nroot=${root#nbd:}
nbdserver=${nroot%%:*}; nroot=${nroot#*:}
nbdport=${nroot%%:*}; nroot=${nroot#*:}
nbdfstype=${nroot%%:*}; nroot=${nroot#*:}
nbdflags=${nroot%%:*}
if [ "$nbdflags" = "$nbdfstype" ]; then
unset nbdflags
fi
if [ "$nbdfstype" = "$nbdport" ]; then
unset nbdfstype
fi
[ -n "$nbdflags" ] && ROOTFLAGS="$nbdflags"
if getarg "ro"; then
if [ -n "$ROOTFLAGS" ]; then
ROOTFLAGS="$ROOTFLAGS,ro"
else
ROOTFLAGS="ro"
fi
fi
if [ -n "$nbdfstype" ]; then
ROOTFSTYPE="$nbdfstype"
else
ROOTFSTYPE=$(getarg rootfstype=) || unset ROOTFSTYPE
fi
{
echo "[Unit]"
echo "Before=initrd-root-fs.target"
echo "[Mount]"
echo "Where=/sysroot"
echo "What=/dev/root"
[ -n "$ROOTFSTYPE" ] && echo "Type=${ROOTFSTYPE}"
[ -n "$ROOTFLAGS" ] && echo "Options=${ROOTFLAGS}"
} > "$GENERATOR_DIR"/sysroot.mount
exit 0
PK �5�Z��4) ) 01systemd-initrd/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
[[ $mount_needs ]] && return 1
if ! dracut_module_included "systemd"; then
derror "systemd-initrd needs systemd in the initramfs"
return 1
fi
return 0
}
# called by dracut
depends() {
echo "systemd"
}
installkernel() {
return 0
}
# called by dracut
install() {
local _mods
inst_multiple -o \
$systemdsystemunitdir/initrd.target \
$systemdsystemunitdir/initrd-fs.target \
$systemdsystemunitdir/initrd-root-device.target \
$systemdsystemunitdir/initrd-root-fs.target \
$systemdsystemunitdir/initrd-switch-root.target \
$systemdsystemunitdir/initrd-switch-root.service \
$systemdsystemunitdir/initrd-cleanup.service \
$systemdsystemunitdir/initrd-udevadm-cleanup-db.service \
$systemdsystemunitdir/initrd-parse-etc.service
systemctl -q --root "$initdir" set-default initrd.target
local VERSION=""
local PRETTY_NAME=""
if [ -e /etc/os-release ]; then
. /etc/os-release
[[ -n ${VERSION} ]] && VERSION+=" "
[[ -n ${PRETTY_NAME} ]] && PRETTY_NAME+=" "
fi
NAME=dracut
ID=dracut
VERSION+="dracut-$DRACUT_VERSION"
PRETTY_NAME+="dracut-$DRACUT_VERSION (Initramfs)"
VERSION_ID=$DRACUT_VERSION
ANSI_COLOR="0;34"
{
echo NAME=\"$NAME\"
echo VERSION=\"$VERSION\"
echo ID=$ID
echo VERSION_ID=$VERSION_ID
echo PRETTY_NAME=\"$PRETTY_NAME\"
echo ANSI_COLOR=\"$ANSI_COLOR\"
} > $initdir/usr/lib/initrd-release
echo dracut-$DRACUT_VERSION > $initdir/lib/dracut/dracut-$DRACUT_VERSION
ln -sf ../usr/lib/initrd-release $initdir/etc/initrd-release
ln -sf initrd-release $initdir/usr/lib/os-release
ln -sf initrd-release $initdir/etc/os-release
}
PK �5�ZF�o� � 71prefixdevname/module-setup.shnu ȯ�� #!/bin/bash
# Make sure we always include generated link files in initrd
check() {
return 0
}
install() {
if dracut_module_included "systemd"; then
inst_multiple -H -o /etc/systemd/network/71-net-ifnames-prefix-*.link
fi
}
PK �5�Z�}%@� � 95lunmask/parse-lunmask.shnu ȯ�� #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
create_udev_rule() {
local transport=$1
local tgtid=$2
local lun=$3
local _rule=/etc/udev/rules.d/51-${transport}-lunmask-${tgtid}.rules
local _cu_type _dev_type
[ -e ${_rule} ] && return 0
if [ ! -f "$_rule" ] ; then
if [ "$transport" = "fc" ] ; then
cat > $_rule <<EOF
ACTION=="add", SUBSYSTEM=="fc_remote_ports", ATTR{port_name}=="$tgtid", PROGRAM="fc_transport_scan_lun.sh $lun"
EOF
elif [ "$transport" = "sas" ] ; then
cat > $_rule <<EOF
ACTION=="add", SUBSYSTEM=="sas_device", ATTR{sas_address}=="$tgtid", PROGRAM="sas_transport_scan_lun.sh $lun"
EOF
fi
fi
}
for lunmask_arg in $(getargs rd.lunmask); do
(
local OLDIFS="$IFS"
local IFS=","
set $lunmask_arg
IFS="$OLDIFS"
if [ -d /sys/module/scsi_mod ] ; then
printf "manual" > /sys/module/scsi_mod/parameters/scan
elif [ ! -f /etc/modprobe.d/95lunmask.conf ] ; then
echo "options scsi_mod scan=manual" > /etc/modprobe.d/95lunmask.conf
fi
create_udev_rule $1 $2 $3
)
done
PK �5�ZЍW`� � 95lunmask/module-setup.shnu ȯ�� #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# called by dracut
cmdline() {
get_lunmask() {
local _dev=$1
local _devpath=$(cd -P /sys/dev/block/$_dev ; echo $PWD)
local _sdev _lun _rport _end_device _classdev _wwpn _sas_address
[ "${_devpath#*/sd}" == "$_devpath" ] && return 1
_sdev="${_devpath%%/block/*}"
_lun="${_sdev##*:}"
# Check for FibreChannel
_rport="${_devpath##*/rport-}"
if [ "$_rport" != "$_devpath" ] ; then
_rport="${_rport%%/*}"
_classdev="/sys/class/fc_remote_ports/rport-${_rport}"
[ -d "$_classdev" ] || return 1
_wwpn=$(cat ${_classdev}/port_name)
echo "rd.lunmask=fc,${_wwpn},${_lun}"
return 0
fi
# Check for SAS
_end_device="${_devpath##*/end_device-}"
if [ "$_end_device" != "$_devpath" ] ; then
_end_device="${_end_device%%/*}"
_classdev="/sys/class/sas_device/end_device-${_end_device}"
[ -e "$_classdev" ] || return 1
_sas_address=$(cat ${_classdev}/sas_address)
echo "rd.lunmask=sas,${_sas_address},${_lun}"
return 0
fi
return 1
}
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves_all get_lunmask
} | sort | uniq
}
# called by dracut
check() {
[[ $hostonly ]] || [[ $mount_needs ]] && {
[ -w /sys/module/scsi_mod/parameters/scan ] || return 255
scan_type=$(cat /sys/module/scsi_mod/parameters/scan)
[ "$scan_type" = "manual" ] && return 0
return 255
}
return 0
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_script "$moddir/fc_transport_scan_lun.sh" /usr/lib/udev/fc_transport_scan_lun.sh
inst_script "$moddir/sas_transport_scan_lun.sh" /usr/lib/udev/sas_transport_scan_lun.sh
inst_hook cmdline 30 "$moddir/parse-lunmask.sh"
if [[ $hostonly_cmdline == "yes" ]] ; then
local _lunmask
for _lunmask in $(cmdline) ; do
printf "%s\n" "$_lunmask" >> "${initdir}/etc/cmdline.d/95lunmask.conf"
done
fi
}
PK �5�Zfh]�8 8 # 95lunmask/sas_transport_scan_lun.shnu ȯ�� #!/bin/bash
#
# sas_transport_lun_scan
#
# Selectively enable individual LUNs behind a SAS end device
#
# ACTION=="add", SUBSYSTEM=="sas_transport", ATTR{sas_address}=="sas_addr", \
# PROGRAM="sas_transport_lun_scan lun"
#
[ -z $DEVPATH ] && exit 1
if [ -n "$1" ] ; then
LUN=$1
else
LUN=-
fi
ID=${DEVPATH##*/end_device-}
HOST=${ID%%:*}
CHANNEL=${ID%%-*}
CHANNEL=${CHANNEL#*:}
if [ -f /sys$DEVPATH/scsi_target_id ] ; then
TARGET=$(cat /sys$DEVPATH/scsi_target_id)
fi
[ -z "$TARGET" ] && exit 1
echo 0 $TARGET $LUN > /sys/class/scsi_host/host$HOST/scan
PK �5�Z�}~G2 2 " 95lunmask/fc_transport_scan_lun.shnu ȯ�� #!/bin/bash
#
# fc_transport_lun_scan
#
# Selectively enable individual LUNs behind an FC remote port
#
# ACTION=="add", SUBSYSTEM=="fc_transport", ATTR{port_name}=="wwpn", \
# PROGRAM="fc_transport_lun_scan lun"
#
[ -z $DEVPATH ] && exit 1
if [ -n "$1" ] ; then
LUN=$1
else
LUN=-
fi
ID=${DEVPATH##*/rport-}
HOST=${ID%%:*}
CHANNEL=${ID%%-*}
CHANNEL=${CHANNEL#*:}
if [ -f /sys$DEVPATH/scsi_target_id ] ; then
TARGET=$(cat /sys$DEVPATH/scsi_target_id)
fi
[ -z "$TARGET" ] && exit 1
echo $CHANNEL $TARGET $LUN > /sys/class/scsi_host/host$HOST/scan
PK �5�Z�zb�� � 91crypt-loop/crypt-loop-lib.shnu ȯ�� #!/bin/sh
command -v ask_for_password >/dev/null || . /lib/dracut-crypt-lib.sh
# loop_decrypt mnt_point keypath keydev device
#
# Decrypts symmetrically encrypted key to standard output.
#
# mnt_point - mount point where <keydev> is already mounted
# keypath - LUKS encrypted loop file path relative to <mnt_point>
# keydev - device on which key resides; only to display in prompt
# device - device to be opened by cryptsetup; only to display in prompt
loop_decrypt() {
local mntp="$1"
local keypath="$2"
local keydev="$3"
local device="$4"
local key="/dev/mapper/$(str_replace "loop-$keydev-$mntp-$keypath" '/' '-')"
if [ ! -b $key ]; then
local loopdev=$(losetup -f "${mntp}/${keypath}" --show)
local opts="-d - luksOpen $loopdev ${key##*/}"
ask_for_password \
--cmd "cryptsetup $opts" \
--prompt "Password ($keypath on $keydev for $device)" \
--tty-echo-off
[ -b $key ] || die "Failed to unlock $keypath on $keydev for $device."
printf "%s\n" "cryptsetup luksClose \"$key\"" > ${hookdir}/cleanup/"crypt-loop-cleanup-10-${key##*/}".sh
printf "%s\n" "losetup -d \"$loopdev\"" > ${hookdir}/cleanup/"crypt-loop-cleanup-20-${loopdev##*/}".sh
fi
cat $key
}
PK �5�Z����w w 91crypt-loop/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
require_binaries losetup || return 1
return 255
}
# called by dracut
depends() {
echo crypt
}
# called by dracut
installkernel() {
hostonly='' instmods loop
}
# called by dracut
install() {
inst_multiple losetup
inst "$moddir/crypt-loop-lib.sh" "/lib/dracut-crypt-loop-lib.sh"
dracut_need_initqueue
}
PK �5�Z¡U� � 01fips/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
return 0
}
# called by dracut
depends() {
return 0
}
# called by dracut
installkernel() {
local _fipsmodules _mod _bootfstype
if [[ -f "${srcmods}/modules.fips" ]]; then
_fipsmodules="$(cat "${srcmods}/modules.fips")"
else
_fipsmodules=""
# Hashes:
_fipsmodules+="sha1 sha224 sha256 sha384 sha512 "
_fipsmodules+="sha3-224 sha3-256 sha3-384 sha3-512 "
_fipsmodules+="crc32c crct10dif ghash "
# Ciphers:
_fipsmodules+="cipher_null des3_ede aes cfb dh ecdh "
# Modes/templates:
_fipsmodules+="ecb cbc ctr xts gcm ccm authenc hmac cmac "
# Compression algs:
_fipsmodules+="deflate lzo zlib "
# PRNG algs:
_fipsmodules+="ansi_cprng "
# Misc:
_fipsmodules+="aead cryptomgr tcrypt crypto_user "
fi
mkdir -m 0755 -p "${initdir}/etc/modprobe.d"
for _mod in $_fipsmodules; do
if hostonly='' instmods -c -s $_mod; then
echo $_mod >> "${initdir}/etc/fipsmodules"
echo "blacklist $_mod" >> "${initdir}/etc/modprobe.d/fips.conf"
fi
done
# with hostonly_default_device fs module for /boot is not installed by default
if [[ $hostonly ]] && [[ "$hostonly_default_device" == "no" ]]; then
_bootfstype=$(find_mp_fstype /boot)
if [[ -n "$_bootfstype" ]]; then
hostonly='' instmods $_bootfstype
else
dwarning "Can't determine fs type for /boot, FIPS check may fail."
fi
fi
}
# called by dracut
install() {
local _dir
inst_hook pre-trigger 01 "$moddir/fips-boot.sh"
inst_hook pre-pivot 01 "$moddir/fips-noboot.sh"
inst_hook pre-udev 01 "$moddir/fips-load-crypto.sh"
inst_script "$moddir/fips.sh" /sbin/fips.sh
inst_multiple sha512hmac rmmod insmod mount uname umount grep sort
inst_simple /etc/system-fips
[ -c ${initdir}/dev/random ] || mknod ${initdir}/dev/random c 1 8 \
|| {
dfatal "Cannot create /dev/random"
dfatal "To create an initramfs with fips support, dracut has to run as root"
return 1
}
[ -c ${initdir}/dev/urandom ] || mknod ${initdir}/dev/urandom c 1 9 \
|| {
dfatal "Cannot create /dev/random"
dfatal "To create an initramfs with fips support, dracut has to run as root"
return 1
}
}
PK �5�Zj� � � 01fips/fips-load-crypto.shnu �[��� #!/bin/sh
if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1
else
. /sbin/fips.sh
fips_load_crypto || die "FIPS integrity test failed"
fi
PK �5�Z��� 01fips/fips-boot.shnu ȯ�� #!/bin/sh
if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1
elif getarg boot= >/dev/null; then
. /sbin/fips.sh
if mount_boot; then
do_fips || die "FIPS integrity test failed"
fi
fi
PK �5�Z��xH� � 01fips/fips-noboot.shnu ȯ�� #!/bin/sh
if ! fipsmode=$(getarg fips) || [ $fipsmode = "0" ]; then
rm -f -- /etc/modprobe.d/fips.conf >/dev/null 2>&1
elif ! [ -f /tmp/fipsdone ]; then
. /sbin/fips.sh
mount_boot
do_fips || die "FIPS integrity test failed"
fi
PK �5�Z���< 01fips/fips.shnu ȯ�� #!/bin/sh
mount_boot()
{
boot=$(getarg boot=)
if [ -n "$boot" ]; then
case "$boot" in
LABEL=*)
boot="$(echo $boot | sed 's,/,\\x2f,g')"
boot="/dev/disk/by-label/${boot#LABEL=}"
;;
UUID=*)
boot="/dev/disk/by-uuid/${boot#UUID=}"
;;
PARTUUID=*)
boot="/dev/disk/by-partuuid/${boot#PARTUUID=}"
;;
PARTLABEL=*)
boot="/dev/disk/by-partlabel/${boot#PARTLABEL=}"
;;
/dev/*)
;;
*)
die "You have to specify boot=<boot device> as a boot option for fips=1" ;;
esac
if ! [ -e "$boot" ]; then
udevadm trigger --action=add >/dev/null 2>&1
[ -z "$UDEVVERSION" ] && UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })
i=0
while ! [ -e $boot ]; do
if [ $UDEVVERSION -ge 143 ]; then
udevadm settle --exit-if-exists=$boot
else
udevadm settle --timeout=30
fi
[ -e $boot ] && break
sleep 0.5
i=$(($i+1))
[ $i -gt 40 ] && break
done
fi
[ -e "$boot" ] || return 1
mkdir /boot
info "Mounting $boot as /boot"
mount -oro "$boot" /boot || return 1
elif [ -d "$NEWROOT/boot" ]; then
rm -fr -- /boot
ln -sf "$NEWROOT/boot" /boot
fi
}
do_rhevh_check()
{
KERNEL=$(uname -r)
kpath=${1}
# If we're on RHEV-H, the kernel is in /run/initramfs/live/vmlinuz0
HMAC_SUM_ORIG=$(cat $NEWROOT/boot/.vmlinuz-${KERNEL}.hmac | while read a b || [ -n "$a" ]; do printf "%s\n" $a; done)
HMAC_SUM_CALC=$(sha512hmac $kpath | while read a b || [ -n "$a" ]; do printf "%s\n" $a; done || return 1)
if [ -z "$HMAC_SUM_ORIG" ] || [ -z "$HMAC_SUM_CALC" ] || [ "${HMAC_SUM_ORIG}" != "${HMAC_SUM_CALC}" ]; then
warn "HMAC sum mismatch"
return 1
fi
info "rhevh_check OK"
return 0
}
fips_load_crypto()
{
FIPSMODULES=$(cat /etc/fipsmodules)
info "Loading and integrity checking all crypto modules"
mv /etc/modprobe.d/fips.conf /etc/modprobe.d/fips.conf.bak
for _module in $FIPSMODULES; do
if [ "$_module" != "tcrypt" ]; then
if ! modprobe "${_module}" 2>/tmp/fips.modprobe_err; then
# check if kernel provides generic algo
_found=0
while read _k _s _v || [ -n "$_k" ]; do
[ "$_k" != "name" -a "$_k" != "driver" ] && continue
[ "$_v" != "$_module" ] && continue
_found=1
break
done </proc/crypto
[ "$_found" = "0" ] && cat /tmp/fips.modprobe_err >&2 && return 1
fi
fi
done
mv /etc/modprobe.d/fips.conf.bak /etc/modprobe.d/fips.conf
info "Self testing crypto algorithms"
modprobe tcrypt || return 1
rmmod tcrypt
}
do_fips()
{
local _v
local _s
local _v
local _module
KERNEL=$(uname -r)
info "Checking integrity of kernel"
if [ -e "/run/initramfs/live/vmlinuz0" ]; then
do_rhevh_check /run/initramfs/live/vmlinuz0 || return 1
elif [ -e "/run/initramfs/live/isolinux/vmlinuz0" ]; then
do_rhevh_check /run/initramfs/live/isolinux/vmlinuz0 || return 1
else
BOOT_IMAGE="$(getarg BOOT_IMAGE)"
# On s390x, BOOT_IMAGE isn't a path but an integer representing the
# entry number selected. Let's try the root of /boot first, and
# otherwise fallback to trying to parse the BLS entries if it's a
# BLS-based system.
if [ "$(uname -m)" = s390x ]; then
if [ -e "/boot/vmlinuz-${KERNEL}" ]; then
BOOT_IMAGE="vmlinuz-${KERNEL}"
elif [ -d /boot/loader/entries ]; then
i=0
for bls in $(ls -d /boot/loader/entries/*.conf | sort -rV); do
if [ $i -eq ${BOOT_IMAGE:-0} ] && [ -r "$bls" ]; then
BOOT_IMAGE="$(grep -e '^linux' "$bls" | grep -o ' .*$')"
BOOT_IMAGE=${BOOT_IMAGE:1}
break
fi
((i++))
done
fi
fi
# Trim off any leading GRUB boot device (e.g. ($root) )
BOOT_IMAGE="$(echo "${BOOT_IMAGE}" | sed 's/^(.*)//')"
BOOT_IMAGE_NAME="${BOOT_IMAGE##*/}"
BOOT_IMAGE_PATH="${BOOT_IMAGE%${BOOT_IMAGE_NAME}}"
if [ -z "$BOOT_IMAGE_NAME" ]; then
BOOT_IMAGE_NAME="vmlinuz-${KERNEL}"
elif ! [ -e "/boot/${BOOT_IMAGE_PATH}/${BOOT_IMAGE_NAME}" ]; then
#if /boot is not a separate partition BOOT_IMAGE might start with /boot
BOOT_IMAGE_PATH=${BOOT_IMAGE_PATH#"/boot"}
#on some achitectures BOOT_IMAGE does not contain path to kernel
#so if we can't find anything, let's treat it in the same way as if it was empty
if ! [ -e "/boot/${BOOT_IMAGE_PATH}/${BOOT_IMAGE_NAME}" ]; then
BOOT_IMAGE_NAME="vmlinuz-${KERNEL}"
BOOT_IMAGE_PATH=""
fi
fi
BOOT_IMAGE_HMAC="/boot/${BOOT_IMAGE_PATH}/.${BOOT_IMAGE_NAME}.hmac"
if ! [ -e "${BOOT_IMAGE_HMAC}" ]; then
warn "${BOOT_IMAGE_HMAC} does not exist"
return 1
fi
(cd "${BOOT_IMAGE_HMAC%/*}" && sha512hmac -c "${BOOT_IMAGE_HMAC}") || return 1
fi
info "All initrd crypto checks done"
> /tmp/fipsdone
umount /boot >/dev/null 2>&1
return 0
}
PK �5�ZR�G 95terminfo/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
install() {
local _terminfodir
# terminfo bits make things work better if you fall into interactive mode
for _terminfodir in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
[ -f ${_terminfodir}/l/linux ] && break
done
if [ -d ${_terminfodir} ]; then
for i in "l/linux" "v/vt100" "v/vt102" "v/vt220"; do
inst_dir "$_terminfodir/${i%/*}"
$DRACUT_CP -L -t "${initdir}/${_terminfodir}/${i%/*}" "$_terminfodir/$i"
done
fi
}
PK �5�Z�$[1 1 95fstab-sys/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
test -f /etc/fstab.sys || [[ -n $add_fstab || -n $fstab_lines ]]
}
# called by dracut
depends() {
echo fs-lib
}
# called by dracut
install() {
[ -f /etc/fstab.sys ] && inst_simple /etc/fstab.sys
inst_hook pre-pivot 00 "$moddir/mount-sys.sh"
}
PK �5�Z�2�� 95fstab-sys/mount-sys.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type det_fs >/dev/null 2>&1 || . /lib/fs-lib.sh
fstab_mount() {
local _dev _mp _fs _opts _dump _pass _rest
test -e "$1" || return 1
info "Mounting from $1"
while read _dev _mp _fs _opts _dump _pass _rest || [ -n "$_dev" ]; do
[ -z "${_dev%%#*}" ] && continue # Skip comment lines
ismounted $_mp && continue # Skip mounted filesystem
if [ "$_pass" -gt 0 ] && ! strstr "$_opts" _netdev; then
fsck_single "$_dev" "$_fs" "$_opts"
fi
_fs=$(det_fs "$_dev" "$_fs")
info "Mounting $_dev"
if [ -d "$NEWROOT/$_mp" ]; then
mount -v -t $_fs -o $_opts $_dev "$NEWROOT/$_mp" 2>&1 | vinfo
else
[ -d "$_mp" ] || mkdir -p "$_mp"
mount -v -t $_fs -o $_opts $_dev $_mp 2>&1 | vinfo
fi
done < $1
return 0
}
# systemd will mount and run fsck from /etc/fstab and we don't want to
# run into a race condition.
if [ -z "$DRACUT_SYSTEMD" ]; then
[ -f /etc/fstab ] && fstab_mount /etc/fstab
fi
# prefer $NEWROOT/etc/fstab.sys over local /etc/fstab.sys
if [ -f $NEWROOT/etc/fstab.sys ]; then
fstab_mount $NEWROOT/etc/fstab.sys
elif [ -f /etc/fstab.sys ]; then
fstab_mount /etc/fstab.sys
fi
PK �5�Z�{�� � 95rootfs-block/block-genrules.shnu ȯ�� #!/bin/sh
if [ "${root%%:*}" = "block" ]; then
{
printf 'KERNEL=="%s", SYMLINK+="root"\n' \
${root#block:/dev/}
printf 'SYMLINK=="%s", SYMLINK+="root"\n' \
${root#block:/dev/}
} >> /etc/udev/rules.d/99-root.rules
printf '[ -e "%s" ] && { ln -s "%s" /dev/root 2>/dev/null; rm "$job"; }\n' \
"${root#block:}" "${root#block:}" > $hookdir/initqueue/settled/blocksymlink.sh
wait_for_dev "${root#block:}"
fi
PK �5�Z���� � 95rootfs-block/rootfallback.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
for root in $(getargs rootfallback=); do
case "$root" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="/dev/disk/by-label/${root#LABEL=}"
;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="${root#UUID=}"
root="$(echo $root | tr "[:upper:]" "[:lower:]")"
root="/dev/disk/by-uuid/${root#UUID=}"
;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="${root#PARTUUID=}"
root="$(echo $root | tr "[:upper:]" "[:lower:]")"
root="/dev/disk/by-partuuid/${root}"
;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="/dev/disk/by-partlabel/${root#PARTLABEL=}"
;;
esac
if ! [ -b "$root" ]; then
warn "Could not find rootfallback $root"
continue
fi
if mount "$root" /sysroot; then
info "Mounted rootfallback $root"
exit 0
else
warn "Failed to mount rootfallback $root"
exit 1
fi
done
[ -e "$job" ] && rm -f "$job"
PK �5�Zg�� � 95rootfs-block/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
return 0
}
# called by dracut
depends() {
echo fs-lib
}
cmdline_journal() {
if [[ $hostonly ]]; then
for dev in "${!host_fs_types[@]}"; do
[[ ${host_fs_types[$dev]} = "reiserfs" ]] || [[ ${host_fs_types[$dev]} = "xfs" ]] || continue
rootopts=$(find_dev_fsopts "$dev")
if [[ ${host_fs_types[$dev]} = "reiserfs" ]]; then
journaldev=$(fs_get_option $rootopts "jdev")
elif [[ ${host_fs_types[$dev]} = "xfs" ]]; then
journaldev=$(fs_get_option $rootopts "logdev")
fi
if [ -n "$journaldev" ]; then
printf " root.journaldev=%s" "$journaldev"
fi
done
fi
return 0
}
cmdline_rootfs() {
local _dev=/dev/block/$(find_root_block_device)
local _fstype _flags _subvol
# "--no-hostonly-default-device" can result in empty root_devs
if [ "${#root_devs[@]}" -eq 0 ]; then
return
fi
if [ -e $_dev ]; then
printf " root=%s" "$(shorten_persistent_dev "$(get_persistent_dev "$_dev")")"
_fstype="$(find_mp_fstype /)"
_flags="$(find_mp_fsopts /)"
printf " rootfstype=%s" "$_fstype"
if [[ $use_fstab != yes ]] && [[ $_fstype = btrfs ]]; then
_subvol=$(findmnt -e -v -n -o FSROOT --target /) \
&& _subvol=${_subvol#/}
_flags="$_flags,${_subvol:+subvol=$_subvol}"
fi
printf " rootflags=%s" "${_flags#,}"
fi
}
# called by dracut
cmdline() {
cmdline_rootfs
cmdline_journal
}
# called by dracut
install() {
if [[ $hostonly_cmdline == "yes" ]]; then
local _journaldev=$(cmdline_journal)
[[ $_journaldev ]] && printf "%s\n" "$_journaldev" >> "${initdir}/etc/cmdline.d/95root-journaldev.conf"
local _rootdev=$(cmdline_rootfs)
[[ $_rootdev ]] && printf "%s\n" "$_rootdev" >> "${initdir}/etc/cmdline.d/95root-dev.conf"
fi
inst_multiple umount
inst_multiple tr
if ! dracut_module_included "systemd"; then
inst_hook cmdline 95 "$moddir/parse-block.sh"
inst_hook pre-udev 30 "$moddir/block-genrules.sh"
inst_hook mount 99 "$moddir/mount-root.sh"
fi
inst_hook initqueue/timeout 99 "$moddir/rootfallback.sh"
}
PK �5�Z(D~F F 95rootfs-block/mount-root.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type det_fs >/dev/null 2>&1 || . /lib/fs-lib.sh
mount_root() {
local _ret
local _rflags_ro
# sanity - determine/fix fstype
rootfs=$(det_fs "${root#block:}" "$fstype")
journaldev=$(getarg "root.journaldev=")
if [ -n "$journaldev" ]; then
case "$rootfs" in
xfs)
rflags="${rflags:+${rflags},}logdev=$journaldev"
;;
reiserfs)
fsckoptions="-j $journaldev $fsckoptions"
rflags="${rflags:+${rflags},}jdev=$journaldev"
;;
*);;
esac
fi
_rflags_ro="$rflags,ro"
_rflags_ro="${_rflags_ro##,}"
while ! mount -t ${rootfs} -o "$_rflags_ro" "${root#block:}" "$NEWROOT"; do
warn "Failed to mount -t ${rootfs} -o $_rflags_ro ${root#block:} $NEWROOT"
fsck_ask_err
done
READONLY=
fsckoptions=
if [ -f "$NEWROOT"/etc/sysconfig/readonly-root ]; then
. "$NEWROOT"/etc/sysconfig/readonly-root
fi
if getargbool 0 "readonlyroot=" -y readonlyroot; then
READONLY=yes
fi
if getarg noreadonlyroot ; then
READONLY=no
fi
if [ -f "$NEWROOT"/fastboot ] || getargbool 0 fastboot ; then
fastboot=yes
fi
if ! getargbool 0 rd.skipfsck; then
if [ -f "$NEWROOT"/fsckoptions ]; then
fsckoptions=$(cat "$NEWROOT"/fsckoptions)
fi
if [ -f "$NEWROOT"/forcefsck ] || getargbool 0 forcefsck ; then
fsckoptions="-f $fsckoptions"
elif [ -f "$NEWROOT"/.autofsck ]; then
[ -f "$NEWROOT"/etc/sysconfig/autofsck ] && \
. "$NEWROOT"/etc/sysconfig/autofsck
if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
AUTOFSCK_OPT="$AUTOFSCK_OPT -f"
fi
if [ -n "$AUTOFSCK_SINGLEUSER" ]; then
warn "*** Warning -- the system did not shut down cleanly. "
warn "*** Dropping you to a shell; the system will continue"
warn "*** when you leave the shell."
emergency_shell
fi
fsckoptions="$AUTOFSCK_OPT $fsckoptions"
fi
fi
rootopts=
if getargbool 1 rd.fstab -d -n rd_NO_FSTAB \
&& ! getarg rootflags \
&& [ -f "$NEWROOT/etc/fstab" ] \
&& ! [ -L "$NEWROOT/etc/fstab" ]; then
# if $NEWROOT/etc/fstab contains special mount options for
# the root filesystem,
# remount it with the proper options
rootopts="defaults"
while read dev mp fs opts dump fsck || [ -n "$dev" ]; do
# skip comments
[ "${dev%%#*}" != "$dev" ] && continue
if [ "$mp" = "/" ]; then
# sanity - determine/fix fstype
rootfs=$(det_fs "${root#block:}" "$fs")
rootopts=$opts
rootfsck=$fsck
break
fi
done < "$NEWROOT/etc/fstab"
fi
# we want rootflags (rflags) to take precedence so prepend rootopts to
# them
rflags="${rootopts},${rflags}"
rflags="${rflags#,}"
rflags="${rflags%,}"
# backslashes are treated as escape character in fstab
# esc_root=$(echo ${root#block:} | sed 's,\\,\\\\,g')
# printf '%s %s %s %s 1 1 \n' "$esc_root" "$NEWROOT" "$rootfs" "$rflags" >/etc/fstab
ran_fsck=0
if fsck_able "$rootfs" && \
[ "$rootfsck" != "0" -a -z "$fastboot" -a "$READONLY" != "yes" ] && \
! strstr "${rflags}" _netdev && \
! getargbool 0 rd.skipfsck; then
umount "$NEWROOT"
fsck_single "${root#block:}" "$rootfs" "$rflags" "$fsckoptions"
_ret=$?
ran_fsck=1
fi
echo "${root#block:} $NEWROOT $rootfs ${rflags:-defaults} 0 $rootfsck" >> /etc/fstab
if ! ismounted "$NEWROOT"; then
info "Mounting ${root#block:} with -o ${rflags}"
mount "$NEWROOT" 2>&1 | vinfo
elif ! are_lists_eq , "$rflags" "$_rflags_ro" defaults; then
info "Remounting ${root#block:} with -o ${rflags}"
mount -o remount "$NEWROOT" 2>&1 | vinfo
fi
if ! getargbool 0 rd.skipfsck; then
[ -f "$NEWROOT"/forcefsck ] && rm -f -- "$NEWROOT"/forcefsck 2>/dev/null
[ -f "$NEWROOT"/.autofsck ] && rm -f -- "$NEWROOT"/.autofsck 2>/dev/null
fi
}
if [ -n "$root" -a -z "${root%%block:*}" ]; then
mount_root
fi
PK �5�Z�� ̜ � 95rootfs-block/parse-block.shnu ȯ�� #!/bin/sh
case "$root" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="block:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="${root#UUID=}"
root="$(echo $root | tr "[:upper:]" "[:lower:]")"
root="block:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="${root#PARTUUID=}"
root="$(echo $root | tr "[:upper:]" "[:lower:]")"
root="block:/dev/disk/by-partuuid/${root}"
rootok=1 ;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
/dev/*)
root="block:${root}"
rootok=1 ;;
esac
[ "${root%%:*}" = "block" ] && wait_for_dev "${root#block:}"
PK �5�ZA�uR� � 90mdraid/mdraid-needshutdown.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
for md in /dev/md[0-9_]*; do
[ -b "$md" ] || continue
need_shutdown
break
done
PK �5�Z� m� � % 90mdraid/65-md-incremental-imsm.rulesnu �[��� # This file causes block devices with Linux RAID (mdadm) signatures to
# automatically cause mdadm to be run.
# See udev(8) for syntax
ACTION!="add|change", GOTO="md_end"
SUBSYSTEM!="block", GOTO="md_end"
ENV{rd_NO_MD}=="?*", GOTO="md_end"
KERNEL=="md*", ENV{ID_FS_TYPE}!="linux_raid_member", GOTO="md_end"
KERNEL=="md*", ACTION!="change", GOTO="md_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="md_end"
ENV{ID_FS_TYPE}=="ddf_raid_member|isw_raid_member|linux_raid_member", GOTO="md_try"
GOTO="md_end"
LABEL="md_try"
ENV{ID_FS_TYPE}=="isw_raid_member", ENV{rd_NO_MDIMSM}=="?*", GOTO="md_end"
ENV{ID_FS_TYPE}=="ddf_raid_member", ENV{rd_NO_MDDDF}=="?*", GOTO="md_end"
# already done ?
PROGRAM="/bin/sh -c 'for i in $sys/$devpath/holders/md[0-9_]*; do [ -e $$i ] && exit 0; done; exit 1;' ", \
GOTO="md_end"
# for native arrays - array's uuid has to be specified
# for containers - container's uuid has to be specified
# TODO : how to get embedded array's uuid having container's component ?
#
# UUID CHECK
ENV{DEVTYPE}!="partition", \
RUN+="/sbin/partx -d --nr 1-1024 $env{DEVNAME}"
RUN+="/sbin/initqueue --timeout --name 50-mdraid_start --onetime --unique /sbin/mdraid_start"
#
# Incrementally build the md array; this will automatically assemble
# any eventual containers as well (imsm, ddf)
#
LABEL="md_incremental"
RUN+="/sbin/mdadm -I $env{DEVNAME}"
LABEL="md_end"
PK �5�Z)��� � 90mdraid/md-shutdown.shnu ȯ�� #!/bin/sh
_do_md_shutdown() {
local ret
local final=$1
info "Waiting for mdraid devices to be clean."
mdadm -vv --wait-clean --scan| vinfo
ret=$?
info "Disassembling mdraid devices."
mdadm -vv --stop --scan | vinfo
ret=$(($ret+$?))
if [ "x$final" != "x" ]; then
info "/proc/mdstat:"
vinfo < /proc/mdstat
fi
return $ret
}
if command -v mdadm >/dev/null; then
_do_md_shutdown $1
else
:
fi
PK �5�Z�6��? ? 90mdraid/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
local _rootdev
# No mdadm? No mdraid support.
require_binaries mdadm expr || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for dev in "${!host_fs_types[@]}"; do
[[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
DEVPATH=$(get_devpath_block "$dev")
for holder in "$DEVPATH"/holders/*; do
[[ -e "$holder" ]] || continue
[[ -e "$holder/md" ]] && return 0
break
done
done
return 255
}
return 0
}
# called by dracut
depends() {
echo rootfs-block
return 0
}
# called by dracut
installkernel() {
instmods =drivers/md
}
# called by dracut
cmdline() {
local _activated dev line UUID
declare -A _activated
for dev in "${!host_fs_types[@]}"; do
[[ "${host_fs_types[$dev]}" != *_raid_member ]] && continue
UUID=$(
/sbin/mdadm --examine --export $dev \
| while read line || [ -n "$line" ]; do
[[ ${line#MD_UUID=} = $line ]] && continue
printf "%s" "${line#MD_UUID=} "
done
)
[[ -z "$UUID" ]] && continue
if ! [[ ${_activated[${UUID}]} ]]; then
printf "%s" " rd.md.uuid=${UUID}"
_activated["${UUID}"]=1
fi
done
}
# called by dracut
install() {
local rule rule_path
inst_multiple cat expr
inst_multiple -o mdmon
inst $(command -v partx) /sbin/partx
inst $(command -v mdadm) /sbin/mdadm
if [[ $hostonly_cmdline == "yes" ]]; then
local _raidconf=$(cmdline)
[[ $_raidconf ]] && printf "%s\n" "$_raidconf" >> "${initdir}/etc/cmdline.d/90mdraid.conf"
fi
# <mdadm-3.3 udev rule
inst_rules 64-md-raid.rules
# >=mdadm-3.3 udev rules
inst_rules 63-md-raid-arrays.rules 64-md-raid-assembly.rules
# remove incremental assembly from stock rules, so they don't shadow
# 65-md-inc*.rules and its fine-grained controls, or cause other problems
# when we explicitly don't want certain components to be incrementally
# assembled
for rule in 64-md-raid.rules 64-md-raid-assembly.rules; do
rule_path="${initdir}${udevdir}/rules.d/${rule}"
[ -f "${rule_path}" ] && sed -i -r \
-e '/(RUN|IMPORT\{program\})\+?="[[:alpha:]/]*mdadm[[:blank:]]+(--incremental|-I)[[:blank:]]+(--export )?(\$env\{DEVNAME\}|\$tempnode|\$devnode)/d' \
"${rule_path}"
done
inst_rules "$moddir/65-md-incremental-imsm.rules"
inst_rules "$moddir/59-persistent-storage-md.rules"
prepare_udev_rules 59-persistent-storage-md.rules
# guard against pre-3.0 mdadm versions, that can't handle containers
if ! mdadm -Q -e imsm /dev/null >/dev/null 2>&1; then
inst_hook pre-trigger 30 "$moddir/md-noimsm.sh"
fi
if ! mdadm -Q -e ddf /dev/null >/dev/null 2>&1; then
inst_hook pre-trigger 30 "$moddir/md-noddf.sh"
fi
if [[ $hostonly ]] || [[ $mdadmconf = "yes" ]]; then
if [ -f /etc/mdadm.conf ]; then
inst -H /etc/mdadm.conf
else
[ -f /etc/mdadm/mdadm.conf ] && inst -H /etc/mdadm/mdadm.conf /etc/mdadm.conf
fi
if [ -d /etc/mdadm.conf.d ]; then
local f
inst_dir /etc/mdadm.conf.d
for f in /etc/mdadm.conf.d/*.conf; do
[ -f "$f" ] || continue
inst -H "$f"
done
fi
fi
inst_hook pre-udev 30 "$moddir/mdmon-pre-udev.sh"
inst_hook pre-trigger 30 "$moddir/parse-md.sh"
inst_hook pre-mount 10 "$moddir/mdraid-waitclean.sh"
inst_hook cleanup 99 "$moddir/mdraid-needshutdown.sh"
inst_hook shutdown 30 "$moddir/md-shutdown.sh"
inst_script "$moddir/mdraid-cleanup.sh" /sbin/mdraid-cleanup
inst_script "$moddir/mdraid_start.sh" /sbin/mdraid_start
if dracut_module_included "systemd"; then
if [ -e $systemdsystemunitdir/mdmon@.service ]; then
inst_simple $systemdsystemunitdir/mdmon@.service
fi
if [ -e $systemdsystemunitdir/mdadm-last-resort@.service ]; then
inst_simple $systemdsystemunitdir/mdadm-last-resort@.service
fi
if [ -e $systemdsystemunitdir/mdadm-last-resort@.timer ]; then
inst_simple $systemdsystemunitdir/mdadm-last-resort@.timer
fi
if [ -e $dracutsysrootdir$systemdsystemunitdir/mdadm-grow-continue@.service ]; then
inst_simple $systemdsystemunitdir/mdadm-grow-continue@.service
fi
fi
inst_hook pre-shutdown 30 "$moddir/mdmon-pre-shutdown.sh"
dracut_need_initqueue
}
PK �5�Z��| � � 90mdraid/mdraid-waitclean.shnu ȯ�� #!/bin/sh
if getargbool 0 rd.md.waitclean; then
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
containers=""
for md in /dev/md[0-9_]*; do
[ -b "$md" ] || continue
udevinfo="$(udevadm info --query=env --name=$md)"
strstr "$udevinfo" "DEVTYPE=partition" && continue
if strstr "$udevinfo" "MD_LEVEL=container"; then
containers="$containers $md"
continue
fi
info "Waiting for $md to become clean"
mdadm -W "$md" >/dev/null 2>&1
done
for md in $containers; do
info "Waiting for $md to become clean"
mdadm -W "$md" >/dev/null 2>&1
done
unset containers udevinfo
fi
PK �5�Z�>h$� � 90mdraid/mdmon-pre-shutdown.shnu ȯ�� #!/bin/sh
_do_mdmon_takeover() {
local ret
mdmon --takeover --all
ret=$?
[ $ret -eq 0 ] && info "Taking over mdmon processes."
return $ret
}
if command -v mdmon >/dev/null; then
_do_mdmon_takeover $1
fi
PK �5�Z �X�$
$
90mdraid/parse-md.shnu ȯ�� #!/bin/sh
MD_UUID=$(getargs rd.md.uuid -d rd_MD_UUID=)
# normalize the uuid
MD_UUID=$(str_replace "$MD_UUID" "-" "")
MD_UUID=$(str_replace "$MD_UUID" ":" "")
if ( ! [ -n "$MD_UUID" ] && ! getargbool 0 rd.auto ) || ! getargbool 1 rd.md -d -n rd_NO_MD; then
info "rd.md=0: removing MD RAID activation"
udevproperty rd_NO_MD=1
else
# rewrite the md rules to only process the specified raid array
if [ -n "$MD_UUID" ]; then
for f in /etc/udev/rules.d/65-md-incremental*.rules; do
[ -e "$f" ] || continue
while read line || [ -n "$line" ]; do
if [ "${line%%UUID CHECK}" != "$line" ]; then
for uuid in $MD_UUID; do
printf 'ENV{ID_FS_UUID}=="%s", GOTO="md_uuid_ok"\n' "$(expr substr $uuid 1 8)-$(expr substr $uuid 9 4)-$(expr substr $uuid 13 4)-$(expr substr $uuid 17 4)-$(expr substr $uuid 21 12)"
done;
printf 'IMPORT{program}="/sbin/mdadm --examine --export $tempnode"\n'
for uuid in $MD_UUID; do
printf 'ENV{MD_UUID}=="%s", GOTO="md_uuid_ok"\n' "$(expr substr $uuid 1 8):$(expr substr $uuid 9 8):$(expr substr $uuid 17 8):$(expr substr $uuid 25 8)"
done;
printf 'GOTO="md_end"\n'
printf 'LABEL="md_uuid_ok"\n'
else
echo "$line"
fi
done < "${f}" > "${f}.new"
mv "${f}.new" "$f"
done
for uuid in $MD_UUID; do
uuid="$(expr substr $uuid 1 8):$(expr substr $uuid 9 8):$(expr substr $uuid 17 8):$(expr substr $uuid 25 8)"
wait_for_dev "/dev/disk/by-id/md-uuid-${uuid}"
done
fi
fi
if [ -e /etc/mdadm.conf ] && getargbool 1 rd.md.conf -d -n rd_NO_MDADMCONF; then
udevproperty rd_MDADMCONF=1
rm -f -- $hookdir/pre-pivot/*mdraid-cleanup.sh
fi
if ! getargbool 1 rd.md.conf -d -n rd_NO_MDADMCONF; then
rm -f -- /etc/mdadm/mdadm.conf /etc/mdadm.conf
ln -s $(command -v mdraid-cleanup) $hookdir/pre-pivot/31-mdraid-cleanup.sh 2>/dev/null
fi
# noiswmd nodmraid for anaconda / rc.sysinit compatibility
# note nodmraid really means nobiosraid, so we don't want MDIMSM then either
if ! getargbool 1 rd.md.imsm -d -n rd_NO_MDIMSM -n noiswmd -n nodmraid; then
info "no MD RAID for imsm/isw raids"
udevproperty rd_NO_MDIMSM=1
fi
# same thing with ddf containers
if ! getargbool 1 rd.md.ddf -n rd_NO_MDDDF -n noddfmd -n nodmraid; then
info "no MD RAID for SNIA ddf raids"
udevproperty rd_NO_MDDDF=1
fi
PK �5�Z�<��� � 90mdraid/mdraid-cleanup.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
containers=""
for md in /dev/md[0-9_]*; do
[ -b "$md" ] || continue
udevinfo="$(udevadm info --query=env --name=$md)"
strstr "$udevinfo" "DEVTYPE=partition" && continue
if strstr "$udevinfo" "MD_LEVEL=container"; then
containers="$containers $md"
continue
fi
mdadm -S "$md" >/dev/null 2>&1
done
for md in $containers; do
mdadm -S "$md" >/dev/null 2>&1
done
unset containers udevinfo
PK �5�Z|�aE' ' 90mdraid/mdraid_start.shnu ȯ�� #!/bin/sh
type getargs >/dev/null 2>&1 || . /lib/dracut-lib.sh
_md_start() {
local _udevinfo
local _path_s
local _path_d
local _md="$1"
_udevinfo="$(udevadm info --query=env --name="${_md}")"
strstr "$_udevinfo" "MD_LEVEL=container" && continue
strstr "$_udevinfo" "DEVTYPE=partition" && continue
_path_s="/sys/$(udevadm info -q path -n "${_md}")/md/array_state"
[ ! -r "$_path_s" ] && continue
# inactive ?
[ "$(cat "$_path_s")" != "inactive" ] && continue
mdadm -R "${_md}" 2>&1 | vinfo
# still inactive ?
[ "$(cat "$_path_s")" = "inactive" ] && continue
_path_d="${_path_s%/*}/degraded"
[ ! -r "$_path_d" ] && continue
> $hookdir/initqueue/work
}
_md_force_run() {
local _md
local _UUID
local _MD_UUID=$(getargs rd.md.uuid -d rd_MD_UUID=)
[ -n "$_MD_UUID" ] || getargbool 0 rd.auto || return
if [ -n "$_MD_UUID" ]; then
_MD_UUID=$(str_replace "$_MD_UUID" "-" "")
_MD_UUID=$(str_replace "$_MD_UUID" ":" "")
for _md in /dev/md[0-9_]*; do
[ -b "$_md" ] || continue
_UUID=$(
/sbin/mdadm -D --export "$_md" \
| while read line || [ -n "$line" ]; do
str_starts "$line" "MD_UUID=" || continue
printf "%s" "${line#MD_UUID=}"
done
)
[ -z "$_UUID" ] && continue
_UUID=$(str_replace "$_UUID" ":" "")
# check if we should handle this device
strstr " $_MD_UUID " " $_UUID " || continue
_md_start "${_md}"
done
else
# try to force-run anything not running yet
for _md in /dev/md[0-9_]*; do
[ -b "$_md" ] || continue
_md_start "${_md}"
done
fi
}
_md_force_run
PK �5�Z����X X 90mdraid/md-noddf.shnu ȯ�� #!/bin/sh
info "rd.md.ddf=0: no MD RAID for SNIA ddf raids"
udevproperty rd_NO_MDDDF=1
PK �5�ZU��Z Z 90mdraid/md-noimsm.shnu ȯ�� #!/bin/sh
info "rd.md.imsm=0: no MD RAID for imsm/isw raids"
udevproperty rd_NO_MDIMSM=1
PK �5�Z��@tJ J ' 90mdraid/59-persistent-storage-md.rulesnu �[��� SUBSYSTEM!="block", GOTO="md_end"
ACTION!="add|change", GOTO="md_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="md_end"
KERNEL!="md[0-9]*|md_d[0-9]*|md/*", KERNEL!="md*", GOTO="md_end"
# partitions have no md/{array_state,metadata_version}
ENV{DEVTYPE}=="partition", GOTO="md_ignore_state"
# container devices have a metadata version of e.g. 'external:ddf' and
# never leave state 'inactive'
ATTR{md/metadata_version}=="external:[A-Za-z]*", ATTR{md/array_state}=="inactive", GOTO="md_ignore_state"
TEST!="md/array_state", GOTO="md_end"
ATTR{md/array_state}=="|clear|inactive", GOTO="md_end"
LABEL="md_ignore_state"
IMPORT{program}="/sbin/mdadm --detail --export $tempnode"
IMPORT BLKID
OPTIONS+="link_priority=100"
OPTIONS+="watch"
OPTIONS+="db_persist"
LABEL="md_end"
PK �5�Z�]dׂ � 90mdraid/mdmon-pre-udev.shnu ȯ�� #!/bin/sh
# save state dir for mdmon/mdadm for the real root
[ -d /run/mdadm ] || mkdir -m 0755 /run/mdadm
# backward compat link
PK �5�Z%�O�� � / 98dracut-systemd/dracut-pre-mount.service.8.ascnu �[��� DRACUT-PRE-MOUNT.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-mount.service - runs the dracut hooks before /sysroot is mounted
SYNOPSIS
--------
dracut-pre-mount.service
DESCRIPTION
-----------
This service runs all dracut hooks before the real root is mounted on /sysroot.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
PK �5�Zw��x� � ' 98dracut-systemd/dracut-cmdline.servicenu �[��� # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut cmdline hook
Documentation=man:dracut-cmdline.service(8)
DefaultDependencies=no
Before=dracut-pre-udev.service
After=systemd-journald.socket
Wants=systemd-journald.socket
ConditionPathExists=/usr/lib/initrd-release
ConditionPathExistsGlob=|/etc/cmdline.d/*.conf
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/cmdline
ConditionKernelCommandLine=|rd.break=cmdline
ConditionKernelCommandLine=|resume
ConditionKernelCommandLine=|noresume
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-cmdline
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
PK �5�Z��=e� � / 98dracut-systemd/dracut-initqueue.service.8.ascnu �[��� DRACUT-INITQUEUE.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-initqueue.service - runs the dracut main loop to find the real root
SYNOPSIS
--------
dracut-initqueue.service
DESCRIPTION
-----------
This service runs all the main loop of dracut in the initramfs to find the real root.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
PK �5�ZL� A� � 1 98dracut-systemd/dracut-pre-trigger.service.8.ascnu �[��� DRACUT-PRE-TRIGGER.SERVICE(8)
=============================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-trigger.service - runs the dracut hooks before udevd is triggered
SYNOPSIS
--------
dracut-pre-trigger.service
DESCRIPTION
-----------
This service runs all dracut hooks before udevd is triggered in the initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
PK �5�Z��nK 98dracut-systemd/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
[[ $mount_needs ]] && return 1
if ! dracut_module_included "systemd-initrd"; then
derror "dracut-systemd needs systemd-initrd in the initramfs"
return 1
fi
return 0
}
# called by dracut
depends() {
echo "systemd-initrd"
return 0
}
installkernel() {
return 0
}
# called by dracut
install() {
local _mods
inst_script "$moddir/dracut-emergency.sh" /bin/dracut-emergency
inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/emergency.service
inst_simple "$moddir/dracut-emergency.service" ${systemdsystemunitdir}/dracut-emergency.service
inst_simple "$moddir/emergency.service" ${systemdsystemunitdir}/rescue.service
ln_r "${systemdsystemunitdir}/initrd.target" "${systemdsystemunitdir}/default.target"
inst_script "$moddir/dracut-cmdline.sh" /bin/dracut-cmdline
inst_script "$moddir/dracut-cmdline-ask.sh" /bin/dracut-cmdline-ask
inst_script "$moddir/dracut-pre-udev.sh" /bin/dracut-pre-udev
inst_script "$moddir/dracut-pre-trigger.sh" /bin/dracut-pre-trigger
inst_script "$moddir/dracut-initqueue.sh" /bin/dracut-initqueue
inst_script "$moddir/dracut-pre-mount.sh" /bin/dracut-pre-mount
inst_script "$moddir/dracut-mount.sh" /bin/dracut-mount
inst_script "$moddir/dracut-pre-pivot.sh" /bin/dracut-pre-pivot
inst_script "$moddir/rootfs-generator.sh" $systemdutildir/system-generators/dracut-rootfs-generator
mkdir -p "${initdir}/$systemdsystemunitdir/initrd.target.wants"
for i in \
dracut-cmdline.service \
dracut-cmdline-ask.service \
dracut-initqueue.service \
dracut-mount.service \
dracut-pre-mount.service \
dracut-pre-pivot.service \
dracut-pre-trigger.service \
dracut-pre-udev.service \
; do
inst_simple "$moddir/${i}" "$systemdsystemunitdir/${i}"
systemctl -q --root "$initdir" add-wants initrd.target "$i"
done
inst_simple "$moddir/dracut-tmpfiles.conf" "$tmpfilesdir/dracut-tmpfiles.conf"
}
PK �5�ZC],� ) 98dracut-systemd/dracut-cmdline.service.8nu �[��� '\" t
.\" Title: dracut-cmdline.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-CMDLINE\&.SE" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-cmdline.service \- runs the dracut hooks to parse the kernel command line
.SH "SYNOPSIS"
.sp
dracut\-cmdline\&.service
.SH "DESCRIPTION"
.sp
This service runs all the dracut hooks to parse the kernel command line in the initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
PK �5�Zo� e e ) 98dracut-systemd/dracut-pre-pivot.servicenu �[��� # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut pre-pivot and cleanup hook
Documentation=man:dracut-pre-pivot.service(8)
DefaultDependencies=no
After=initrd.target initrd-parse-etc.service sysroot.mount
After=dracut-initqueue.service dracut-pre-mount.service dracut-mount.service
Before=initrd-cleanup.service
Wants=remote-fs.target
After=remote-fs.target
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-pivot
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/cleanup
ConditionKernelCommandLine=|rd.break=pre-pivot
ConditionKernelCommandLine=|rd.break=cleanup
ConditionKernelCommandLine=|rd.break
ConditionPathExists=|/dev/root
ConditionPathExists=|/dev/nfs
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-pivot
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
PK �5�Z���5 5 ) 98dracut-systemd/dracut-initqueue.servicenu �[��� # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut initqueue hook
Documentation=man:dracut-initqueue.service(8)
DefaultDependencies=no
Before=remote-fs-pre.target
Wants=remote-fs-pre.target
After=systemd-udev-trigger.service
Wants=systemd-udev-trigger.service
ConditionPathExists=/usr/lib/initrd-release
ConditionPathExists=|/lib/dracut/need-initqueue
ConditionKernelCommandLine=|rd.break=initqueue
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-initqueue
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
PK �5�Zƶ��6 6 ) 98dracut-systemd/dracut-pre-mount.servicenu �[��� # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut pre-mount hook
Documentation=man:dracut-pre-mount.service(8)
DefaultDependencies=no
Before=initrd-root-fs.target sysroot.mount systemd-fsck-root.service
After=dracut-initqueue.service cryptsetup.target
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-mount
ConditionKernelCommandLine=|rd.break=pre-mount
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-mount
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
PK �5�Z��\0� � $ 98dracut-systemd/dracut-pre-mount.shnu ȯ�� #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
getarg 'rd.break=pre-mount' 'rdbreak=pre-mount' && emergency_shell -n pre-mount "Break pre-mount"
source_hook pre-mount
export -p > /dracut-state.sh
exit 0
PK �5�Z���� � * 98dracut-systemd/dracut-shutdown.service.8nu �[��� '\" t
.\" Title: dracut-shutdown.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
.\" Date: 07/15/2025
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-SHUTDOWN\&.S" "8" "07/15/2025" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-shutdown.service \- unpack the initramfs to /run/initramfs
.SH "SYNOPSIS"
.sp
dracut\-shutdown\&.service
.SH "DESCRIPTION"
.sp
This service unpacks the initramfs image to /run/initramfs\&. systemd pivots into /run/initramfs at shutdown, so the root filesystem can be safely unmounted\&.
.sp
The following steps are executed during a shutdown:
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd switches to the shutdown\&.target
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd starts /lib/systemd/system/shutdown\&.target\&.wants/dracut\-shutdown\&.service
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
dracut\-shutdown\&.service executes /usr/lib/dracut/dracut\-initramfs\-restore which unpacks the initramfs to /run/initramfs
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd finishes shutdown\&.target
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd kills all processes
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd tries to unmount everything and mounts the remaining read\-only
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
systemd checks, if there is a /run/initramfs/shutdown executable
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
if yes, it does a pivot_root to /run/initramfs and executes \&./shutdown\&. The old root is then mounted on /oldroot\&. /usr/lib/dracut/modules\&.d/99shutdown/shutdown\&.sh is the shutdown executable\&.
.RE
.sp
.RS 4
.ie n \{\
\h'-04'\(bu\h'+03'\c
.\}
.el \{\
.sp -1
.IP \(bu 2.3
.\}
shutdown will try to umount every /oldroot mount and calls the various shutdown hooks from the dracut modules
.RE
.sp
This ensures, that all devices are disassembled and unmounted cleanly\&.
.sp
To debug the shutdown process, you can get a shell in the shutdown procedure by injecting "rd\&.break=pre\-shutdown rd\&.shell" or "rd\&.break=shutdown rd\&.shell"\&.
.sp
.if n \{\
.RS 4
.\}
.nf
# mkdir \-p /run/initramfs/etc/cmdline\&.d
# echo "rd\&.break=pre\-shutdown rd\&.shell" > /run/initramfs/etc/cmdline\&.d/debug\&.conf
# touch /run/initramfs/\&.need_shutdown
.fi
.if n \{\
.RE
.\}
.sp
In case the unpack of the initramfs fails, dracut\-shutdown\-onfailure\&.service executes to make sure switch root doesn\(cqt happen, since it would result in switching to an incomplete initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\fR(8)
PK �5�Z �r�[
[
" 98dracut-systemd/dracut-cmdline.shnu ȯ�� #!/bin/sh
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
[ -f /usr/lib/initrd-release ] && . /usr/lib/initrd-release
[ -n "$VERSION" ] && info "dracut-$VERSION"
if ! getargbool 1 'rd.hostonly'; then
[ -f /etc/cmdline.d/99-cmdline-ask.conf ] && mv /etc/cmdline.d/99-cmdline-ask.conf /tmp/99-cmdline-ask.conf
remove_hostonly_files
[ -f /tmp/99-cmdline-ask.conf ] && mv /tmp/99-cmdline-ask.conf /etc/cmdline.d/99-cmdline-ask.conf
fi
info "Using kernel command line parameters:" $(getcmdline)
getargbool 0 rd.udev.log-priority=info -d rd.udev.info -d -n -y rdudevinfo && echo 'udev_log="info"' >> /etc/udev/udev.conf
getargbool 0 rd.udev.log-priority=debug -d rd.udev.debug -d -n -y rdudevdebug && echo 'udev_log="debug"' >> /etc/udev/udev.conf
source_conf /etc/conf.d
# Get the "root=" parameter from the kernel command line, but differentiate
# between the case where it was set to the empty string and the case where it
# wasn't specified at all.
if ! root="$(getarg root=)"; then
root_unset='UNSET'
fi
rflags="$(getarg rootflags=)"
getargbool 0 ro && rflags="${rflags},ro"
getargbool 0 rw && rflags="${rflags},rw"
rflags="${rflags#,}"
fstype="$(getarg rootfstype=)"
if [ -z "$fstype" ]; then
fstype="auto"
fi
export root
export rflags
export fstype
make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab'
# run scriptlets to parse the command line
getarg 'rd.break=cmdline' -d 'rdbreak=cmdline' && emergency_shell -n cmdline "Break before cmdline"
source_hook cmdline
[ -f /lib/dracut/parse-resume.sh ] && . /lib/dracut/parse-resume.sh
case "${root}${root_unset}" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="block:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="block:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="block:/dev/disk/by-partuuid/${root#PARTUUID=}"
rootok=1 ;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
/dev/*)
root="block:${root}"
rootok=1 ;;
UNSET|gpt-auto)
# systemd's gpt-auto-generator handles this case.
rootok=1 ;;
esac
[ -z "${root}${root_unset}" ] && die "Empty root= argument"
[ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"
export root rflags fstype netroot NEWROOT
export -p > /dracut-state.sh
exit 0
PK �5�Z�r��
+ 98dracut-systemd/dracut-pre-mount.service.8nu �[��� '\" t
.\" Title: dracut-pre-mount.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-MOUNT\&" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-mount.service \- runs the dracut hooks before /sysroot is mounted
.SH "SYNOPSIS"
.sp
dracut\-pre\-mount\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before the real root is mounted on /sysroot\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
PK �5�Z)!� + 98dracut-systemd/dracut-pre-pivot.service.8nu �[��� '\" t
.\" Title: dracut-pre-pivot.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-PIVOT\&" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-pivot.service \- runs the dracut hooks before switching root
.SH "SYNOPSIS"
.sp
dracut\-pre\-pivot\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before the system switched to the real root\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
PK �5�Zl���5 5 2 98dracut-systemd/dracut-shutdown-onfailure.servicenu �[��� # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=Service executing upon dracut-shutdown failure to perform cleanup
Documentation=man:dracut-shutdown.service(8)
DefaultDependencies=no
[Service]
Type=oneshot
ExecStart=-/bin/rm /run/initramfs/shutdown
StandardError=null
PK �5�Z%�@� % 98dracut-systemd/dracut-mount.servicenu �[��� # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut mount hook
Documentation=man:dracut-mount.service(8)
After=initrd-root-fs.target initrd-parse-etc.service
After=dracut-initqueue.service dracut-pre-mount.service
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/mount
ConditionKernelCommandLine=|rd.break=mount
DefaultDependencies=no
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-mount
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
PK �5�Z�� - 98dracut-systemd/dracut-pre-trigger.service.8nu �[��� '\" t
.\" Title: dracut-pre-trigger.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-TRIGGER" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-trigger.service \- runs the dracut hooks before udevd is triggered
.SH "SYNOPSIS"
.sp
dracut\-pre\-trigger\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before udevd is triggered in the initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
PK �5�Z�={ � � % 98dracut-systemd/dracut-tmpfiles.confnu �[��� d /run/initramfs 0755 root root -
d /run/initramfs/log 0755 root root -
L /var/log - - - - ../run/initramfs/log
PK �5�Z\�q�� � ( 98dracut-systemd/dracut-pre-udev.servicenu �[��� # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut pre-udev hook
Documentation=man:dracut-pre-udev.service(8)
DefaultDependencies=no
Before=systemd-udevd.service dracut-pre-trigger.service
After=dracut-cmdline.service
Wants=dracut-cmdline.service
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-udev
ConditionKernelCommandLine=|rd.break=pre-udev
ConditionKernelCommandLine=|rd.driver.blacklist
ConditionKernelCommandLine=|rd.driver.pre
ConditionKernelCommandLine=|rd.driver.post
ConditionPathExistsGlob=|/etc/cmdline.d/*.conf
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-udev
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
PK �5�Z�*R� � + 98dracut-systemd/dracut-pre-trigger.servicenu �[��� # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut pre-trigger hook
Documentation=man:dracut-pre-trigger.service(8)
DefaultDependencies=no
Before=systemd-udev-trigger.service dracut-initqueue.service
After=dracut-pre-udev.service systemd-udevd.service systemd-tmpfiles-setup-dev.service
Wants=dracut-pre-udev.service systemd-udevd.service
ConditionPathExists=/usr/lib/initrd-release
ConditionDirectoryNotEmpty=|/lib/dracut/hooks/pre-trigger
ConditionKernelCommandLine=|rd.break=pre-trigger
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-pre-trigger
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
PK �5�ZW��z $ 98dracut-systemd/dracut-pre-pivot.shnu ȯ�� #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
getarg 'rd.break=pre-pivot' 'rdbreak=pre-pivot' && emergency_shell -n pre-pivot "Break pre-pivot"
source_hook pre-pivot
# pre pivot cleanup scripts are sourced just before we switch over to the new root.
getarg 'rd.break=cleanup' 'rdbreak=cleanup' && emergency_shell -n cleanup "Break cleanup"
source_hook cleanup
_bv=$(getarg rd.break -d rdbreak) && [ -z "$_bv" ] &&
emergency_shell -n switch_root "Break before switch_root"
unset _bv
# remove helper symlink
[ -h /dev/root ] && rm -f -- /dev/root
[ -h /dev/nfs ] && rm -f -- /dev/nfs
exit 0
PK �5�Z1;��� � & 98dracut-systemd/dracut-pre-trigger.shnu ȯ�� #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab'
source_hook pre-trigger
getarg 'rd.break=pre-trigger' 'rdbreak=pre-trigger' && emergency_shell -n pre-trigger "Break pre-trigger"
udevadm control --reload >/dev/null 2>&1 || :
export -p > /dracut-state.sh
exit 0
PK �5�Z�A�- 98dracut-systemd/dracut-mount.shnu ȯ�� #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook mount" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=mount' -d 'rdbreak=mount' && emergency_shell -n mount "Break mount"
# mount scripts actually try to mount the root filesystem, and may
# be sourced any number of times. As soon as one suceeds, no more are sourced.
i=0
while :; do
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
umount "$NEWROOT"
fi
for f in $hookdir/mount/*.sh; do
[ -f "$f" ] && . "$f"
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
warn "$NEWROOT has no proper rootfs layout, ignoring and removing offending mount hook"
umount "$NEWROOT"
rm -f -- "$f"
fi
done
i=$(($i+1))
[ $i -gt 20 ] && emergency_shell "Can't mount root filesystem"
done
export -p > /dracut-state.sh
exit 0
PK �5�Z�1��� � " 98dracut-systemd/emergency.servicenu �[��� # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=Emergency Shell
DefaultDependencies=no
After=systemd-vconsole-setup.service
Wants=systemd-vconsole-setup.service
Conflicts=shutdown.target
Before=shutdown.target
[Service]
Environment=HOME=/
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
WorkingDirectory=/
ExecStart=/bin/dracut-emergency
ExecStopPost=-/usr/bin/systemctl --fail --no-block default
Type=idle
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
KillMode=process
IgnoreSIGPIPE=no
TasksMax=infinity
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
PK �5�Z�g58 8 $ 98dracut-systemd/rootfs-generator.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
generator_wait_for_dev()
{
local _name
local _timeout
_name="$(str_replace "$1" '/' '\x2f')"
_timeout=$(getarg rd.timeout)
_timeout=${_timeout:-0}
if ! [ -e "$hookdir/initqueue/finished/devexists-${_name}.sh" ]; then
# If a LUKS device needs unlocking via systemd in the initrd, assume
# it's for the root device. In that case, don't block on it if it's
# after remote-fs-pre.target since the initqueue is ordered before it so
# it will never actually show up (think Tang-pinned rootfs).
cat > "$hookdir/initqueue/finished/devexists-${_name}.sh" << EOF
if ! grep -q After=remote-fs-pre.target /run/systemd/generator/systemd-cryptsetup@*.service 2>/dev/null; then
[ -e "$1" ]
fi
EOF
{
printf '[ -e "%s" ] || ' $1
printf 'warn "\"%s\" does not exist"\n' $1
} >> "$hookdir/emergency/80-${_name}.sh"
fi
_name=$(dev_unit_name "$1")
if ! [ -L "$GENERATOR_DIR"/initrd.target.wants/${_name}.device ]; then
[ -d "$GENERATOR_DIR"/initrd.target.wants ] || mkdir -p "$GENERATOR_DIR"/initrd.target.wants
ln -s ../${_name}.device "$GENERATOR_DIR"/initrd.target.wants/${_name}.device
fi
if ! [ -f "$GENERATOR_DIR"/${_name}.device.d/timeout.conf ]; then
mkdir -p "$GENERATOR_DIR"/${_name}.device.d
{
echo "[Unit]"
echo "JobTimeoutSec=$_timeout"
echo "JobRunningTimeoutSec=$_timeout"
} > "$GENERATOR_DIR"/${_name}.device.d/timeout.conf
fi
}
generator_mount_rootfs()
{
local _type=$2
local _flags=$3
local _name
[ -z "$1" ] && return 0
_name=$(dev_unit_name "$1")
[ -d "$GENERATOR_DIR" ] || mkdir -p "$GENERATOR_DIR"
if ! [ -f "$GENERATOR_DIR"/sysroot.mount ]; then
{
echo "[Unit]"
echo "Before=initrd-root-fs.target"
echo "Requires=systemd-fsck@${_name}.service"
echo "After=systemd-fsck@${_name}.service"
echo "[Mount]"
echo "Where=/sysroot"
echo "What=$1"
echo "Options=${_flags}"
echo "Type=${_type}"
} > "$GENERATOR_DIR"/sysroot.mount
fi
if ! [ -L "$GENERATOR_DIR"/initrd-root-fs.target.requires/sysroot.mount ]; then
[ -d "$GENERATOR_DIR"/initrd-root-fs.target.requires ] || mkdir -p "$GENERATOR_DIR"/initrd-root-fs.target.requires
ln -s ../sysroot.mount "$GENERATOR_DIR"/initrd-root-fs.target.requires/sysroot.mount
fi
}
generator_fsck_after_pre_mount()
{
local _name
[ -z "$1" ] && return 0
_name=$(dev_unit_name "$1")
[ -d /run/systemd/generator/systemd-fsck@${_name}.service.d ] || mkdir -p /run/systemd/generator/systemd-fsck@${_name}.service.d
if ! [ -f /run/systemd/generator/systemd-fsck@${_name}.service.d/after-pre-mount.conf ]; then
{
echo "[Unit]"
echo "After=dracut-pre-mount.service"
} > /run/systemd/generator/systemd-fsck@${_name}.service.d/after-pre-mount.conf
fi
}
root=$(getarg root=)
case "$root" in
block:LABEL=*|LABEL=*)
root="${root#block:}"
root="$(echo $root | sed 's,/,\\x2f,g')"
root="block:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
block:UUID=*|UUID=*)
root="${root#block:}"
root="block:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
block:PARTUUID=*|PARTUUID=*)
root="${root#block:}"
root="block:/dev/disk/by-partuuid/${root#PARTUUID=}"
rootok=1 ;;
block:PARTLABEL=*|PARTLABEL=*)
root="${root#block:}"
root="block:/dev/disk/by-partlabel/${root#PARTLABEL=}"
rootok=1 ;;
/dev/nfs) # ignore legacy /dev/nfs
;;
/dev/*)
root="block:${root}"
rootok=1 ;;
esac
GENERATOR_DIR="$1"
if [ "$rootok" = "1" ]; then
generator_wait_for_dev "${root#block:}" "$RDRETRY"
generator_fsck_after_pre_mount "${root#block:}"
strstr "$(cat /proc/cmdline)" 'root=' || generator_mount_rootfs "${root#block:}" "$(getarg rootfstype=)" "$(getarg rootflags=)"
fi
exit 0
PK �5�ZI�j�� � / 98dracut-systemd/dracut-pre-pivot.service.8.ascnu �[��� DRACUT-PRE-PIVOT.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-pivot.service - runs the dracut hooks before switching root
SYNOPSIS
--------
dracut-pre-pivot.service
DESCRIPTION
-----------
This service runs all dracut hooks before the system switched to the real root.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
PK �5�Z��N^� � - 98dracut-systemd/dracut-cmdline.service.8.ascnu �[��� DRACUT-CMDLINE.SERVICE(8)
=========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-cmdline.service - runs the dracut hooks to parse the kernel command line
SYNOPSIS
--------
dracut-cmdline.service
DESCRIPTION
-----------
This service runs all the dracut hooks to parse the kernel command line in
the initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
PK �5�Z���X X . 98dracut-systemd/dracut-shutdown.service.8.ascnu �[��� DRACUT-SHUTDOWN.SERVICE(8)
===========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-shutdown.service - unpack the initramfs to /run/initramfs
SYNOPSIS
--------
dracut-shutdown.service
DESCRIPTION
-----------
This service unpacks the initramfs image to /run/initramfs.
systemd pivots into /run/initramfs at shutdown, so the root filesystem
can be safely unmounted.
The following steps are executed during a shutdown:
* systemd switches to the shutdown.target
* systemd starts /lib/systemd/system/shutdown.target.wants/dracut-shutdown.service
* dracut-shutdown.service executes /usr/lib/dracut/dracut-initramfs-restore which unpacks the initramfs to /run/initramfs
* systemd finishes shutdown.target
* systemd kills all processes
* systemd tries to unmount everything and mounts the remaining read-only
* systemd checks, if there is a /run/initramfs/shutdown executable
* if yes, it does a pivot_root to /run/initramfs and executes ./shutdown. The old root is then mounted on /oldroot. /usr/lib/dracut/modules.d/99shutdown/shutdown.sh is the shutdown executable.
* shutdown will try to umount every /oldroot mount and calls the various shutdown hooks from the dracut modules
This ensures, that all devices are disassembled and unmounted cleanly.
To debug the shutdown process, you can get a shell in the shutdown procedure
by injecting "rd.break=pre-shutdown rd.shell" or "rd.break=shutdown rd.shell".
----
# mkdir -p /run/initramfs/etc/cmdline.d
# echo "rd.break=pre-shutdown rd.shell" > /run/initramfs/etc/cmdline.d/debug.conf
# touch /run/initramfs/.need_shutdown
----
In case the unpack of the initramfs fails, dracut-shutdown-onfailure.service
executes to make sure switch root doesn't happen, since it would result in
switching to an incomplete initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut*(8)
PK �5�Z�/�� � ' 98dracut-systemd/dracut-mount.service.8nu �[��� '\" t
.\" Title: dracut-mount.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-MOUNT\&.SERV" "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-mount.service \- runs the dracut hooks after /sysroot is mounted
.SH "SYNOPSIS"
.sp
dracut\-mount\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks after the real root is mounted on /sysroot\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
PK �5�Zn�4c c $ 98dracut-systemd/dracut-initqueue.shnu ȯ�� #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook initqueue" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=initqueue' -d 'rdbreak=initqueue' && emergency_shell -n initqueue "Break before initqueue"
RDRETRY=$(getarg rd.retry -d 'rd_retry=')
RDRETRY=${RDRETRY:-180}
RDRETRY=$(($RDRETRY*2))
export RDRETRY
main_loop=0
export main_loop
while :; do
check_finished && break
udevadm settle --exit-if-exists=$hookdir/initqueue/work
check_finished && break
if [ -f $hookdir/initqueue/work ]; then
rm -f -- "$hookdir/initqueue/work"
fi
for job in $hookdir/initqueue/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
udevadm settle --timeout=0 >/dev/null 2>&1 || continue
for job in $hookdir/initqueue/settled/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
udevadm settle --timeout=0 >/dev/null 2>&1 || continue
# no more udev jobs and queues empty.
sleep 0.5
for i in /run/systemd/ask-password/ask.*; do
[ -e "$i" ] && continue 2
done
if [ $main_loop -gt $((2*$RDRETRY/3)) ]; then
warn "dracut-initqueue timeout - starting timeout scripts"
for job in $hookdir/initqueue/timeout/*.sh; do
[ -e "$job" ] || break
job=$job . $job
udevadm settle --timeout=0 >/dev/null 2>&1 || main_loop=0
[ -f $hookdir/initqueue/work ] && main_loop=0
[ $main_loop -eq 0 ] && break
done
fi
main_loop=$(($main_loop+1))
if [ $main_loop -gt $RDRETRY ]; then
if ! [ -f /sysroot/etc/fstab ] || ! [ -e /sysroot/sbin/init ] ; then
emergency_shell "Could not boot."
fi
warn "Not all disks have been found."
warn "You might want to regenerate your initramfs."
break
fi
done
unset job
unset queuetriggered
unset main_loop
unset RDRETRY
export -p > /dracut-state.sh
exit 0
PK �5�Z�N�P� � & 98dracut-systemd/dracut-cmdline-ask.shnu ȯ�� #!/bin/bash
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
getarg "rd.cmdline=ask" || exit 0
sleep 0.5
echo
sleep 0.5
echo
sleep 0.5
echo
echo
echo
echo
echo "Enter additional kernel command line parameter (end with ctrl-d or .)"
while read -e -p "> " line || [ -n "$line" ]; do
[[ "$line" == "." ]] && break
[[ "$line" ]] && printf -- "%s\n" "$line" >> /etc/cmdline.d/99-cmdline-ask.conf
done
exit 0
PK �5�Z� � * 98dracut-systemd/dracut-pre-udev.service.8nu �[��� '\" t
.\" Title: dracut-pre-udev.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-PRE\-UDEV\&." "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-pre-udev.service \- runs the dracut hooks before udevd is started
.SH "SYNOPSIS"
.sp
dracut\-pre\-udev\&.service
.SH "DESCRIPTION"
.sp
This service runs all dracut hooks before udevd is started in the initramfs\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
PK �5�Z�cԩ � ) 98dracut-systemd/dracut-emergency.servicenu �[��� # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=Dracut Emergency Shell
DefaultDependencies=no
After=systemd-vconsole-setup.service
Wants=systemd-vconsole-setup.service
Conflicts=shutdown.target emergency.target
[Service]
Environment=HOME=/
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
WorkingDirectory=/
ExecStart=-/bin/dracut-emergency
ExecStopPost=-/bin/rm -f -- /.console_lock
Type=oneshot
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
KillMode=process
IgnoreSIGPIPE=no
TasksMax=infinity
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
PK �5�ZM��� � # 98dracut-systemd/dracut-pre-udev.shnu ȯ�� #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
make_trace_mem "hook pre-udev" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
getarg 'rd.break=pre-udev' 'rdbreak=pre-udev' && emergency_shell -n pre-udev "Break pre-udev"
source_hook pre-udev
_modprobe_d=/etc/modprobe.d
if [ -d /usr/lib/modprobe.d ] ; then
_modprobe_d=/usr/lib/modprobe.d
elif [ -d /lib/modprobe.d ] ; then
_modprobe_d=/lib/modprobe.d
elif [ ! -d $_modprobe_d ] ; then
mkdir -p $_modprobe_d
fi
for i in $(getargs rd.driver.pre -d rdloaddriver=); do
(
IFS=,
for p in $i; do
modprobe $p 2>&1 | vinfo
done
)
done
[ -d /etc/modprobe.d ] || mkdir -p /etc/modprobe.d
for i in $(getargs rd.driver.blacklist -d rdblacklist=); do
(
IFS=,
for p in $i; do
echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf
done
)
done
for p in $(getargs rd.driver.post -d rdinsmodpost=); do
echo "blacklist $p" >> $_modprobe_d/initramfsblacklist.conf
_do_insmodpost=1
done
[ -n "$_do_insmodpost" ] && initqueue --settled --unique --onetime insmodpost.sh
unset _do_insmodpost _modprobe_d
unset i
export -p > /dracut-state.sh
exit 0
PK �5�Z�97�O O + 98dracut-systemd/dracut-cmdline-ask.servicenu �[��� # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=dracut ask for additional cmdline parameters
DefaultDependencies=no
Before=dracut-cmdline.service
After=systemd-journald.socket
After=systemd-vconsole-setup.service
Requires=systemd-vconsole-setup.service
Wants=systemd-journald.socket
ConditionPathExists=/usr/lib/initrd-release
ConditionKernelCommandLine=|rd.cmdline=ask
ConditionPathExistsGlob=|/etc/cmdline.d/*.conf
Conflicts=shutdown.target emergency.target
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=-/bin/dracut-cmdline-ask
StandardInput=tty
StandardOutput=inherit
StandardError=inherit
RemainAfterExit=yes
KillMode=process
IgnoreSIGPIPE=no
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
PK �5�Z=�f f $ 98dracut-systemd/dracut-emergency.shnu ȯ�� #!/bin/sh
export DRACUT_SYSTEMD=1
if [ -f /dracut-state.sh ]; then
. /dracut-state.sh 2>/dev/null
fi
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
source_conf /etc/conf.d
type plymouth >/dev/null 2>&1 && plymouth quit
export _rdshell_name="dracut" action="Boot" hook="emergency"
_emergency_action=$(getarg rd.emergency)
if getargbool 1 rd.shell -d -y rdshell || getarg rd.break -d rdbreak; then
FSTXT="/run/dracut/fsck/fsck_help_$fstype.txt"
source_hook "$hook"
echo
rdsosreport
echo
echo
echo 'Entering emergency mode. Exit the shell to continue.'
echo 'Type "journalctl" to view system logs.'
echo 'You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot'
echo 'after mounting them and attach it to a bug report.'
echo
echo
[ -f "$FSTXT" ] && cat "$FSTXT"
[ -f /etc/profile ] && . /etc/profile
[ -z "$PS1" ] && export PS1="$_name:\${PWD}# "
exec sh -i -l
else
export hook="shutdown-emergency"
warn "$action has failed. To debug this issue add \"rd.shell rd.debug\" to the kernel command line."
source_hook "$hook"
[ -z "$_emergency_action" ] && _emergency_action=halt
fi
/bin/rm -f -- /.console_lock
case "$_emergency_action" in
reboot)
reboot || exit 1;;
poweroff)
poweroff || exit 1;;
halt)
halt || exit 1;;
esac
exit 0
PK �5�Z��o�� � . 98dracut-systemd/dracut-pre-udev.service.8.ascnu �[��� DRACUT-PRE-UDEV.SERVICE(8)
==========================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-pre-udev.service - runs the dracut hooks before udevd is started
SYNOPSIS
--------
dracut-pre-udev.service
DESCRIPTION
-----------
This service runs all dracut hooks before udevd is started in the initramfs.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
PK �5�Z� 1�� � + 98dracut-systemd/dracut-mount.service.8.ascnu �[��� DRACUT-MOUNT.SERVICE(8)
=======================
:doctype: manpage
:man source: dracut
:man manual: dracut
NAME
----
dracut-mount.service - runs the dracut hooks after /sysroot is mounted
SYNOPSIS
--------
dracut-mount.service
DESCRIPTION
-----------
This service runs all dracut hooks after the real root is mounted on /sysroot.
AUTHORS
-------
Harald Hoyer
SEE ALSO
--------
*dracut.bootup*(7) *dracut*(8)
PK �5�Zı � + 98dracut-systemd/dracut-initqueue.service.8nu �[��� '\" t
.\" Title: dracut-initqueue.service
.\" Author: [see the "AUTHORS" section]
.\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
.\" Date: 10/09/2018
.\" Manual: dracut
.\" Source: dracut
.\" Language: English
.\"
.TH "DRACUT\-INITQUEUE\&." "8" "10/09/2018" "dracut" "dracut"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
dracut-initqueue.service \- runs the dracut main loop to find the real root
.SH "SYNOPSIS"
.sp
dracut\-initqueue\&.service
.SH "DESCRIPTION"
.sp
This service runs all the main loop of dracut in the initramfs to find the real root\&.
.SH "AUTHORS"
.sp
Harald Hoyer
.SH "SEE ALSO"
.sp
\fBdracut\&.bootup\fR(7) \fBdracut\fR(8)
PK �5�Z��� � ( 98dracut-systemd/dracut-shutdown.servicenu �[��� # This file is part of dracut.
#
# See dracut.bootup(7) for details
[Unit]
Description=Restore /run/initramfs on shutdown
Documentation=man:dracut-shutdown.service(8)
After=local-fs.target boot.mount boot.automount
Wants=local-fs.target
ConditionPathExists=!/run/initramfs/bin/sh
OnFailure=dracut-shutdown-onfailure.service
[Service]
RemainAfterExit=yes
Type=oneshot
ExecStart=/bin/true
ExecStop=/usr/lib/dracut/dracut-initramfs-restore
PK �5�Z�83�@ @ 35network-legacy/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
local _program
require_binaries ip dhclient sed awk grep || return 1
require_any_binary arping arping2 || return 1
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
installkernel() {
return 0
}
# called by dracut
install() {
local _arch _i _dir
inst_multiple ip dhclient sed awk grep
inst_multiple -o arping arping2
strstr "$(arping 2>&1)" "ARPing 2" && mv "$initdir/bin/arping" "$initdir/bin/arping2"
inst_multiple -o ping ping6
inst_multiple -o teamd teamdctl teamnl
inst_simple /etc/libnl/classid
inst_script "$moddir/ifup.sh" "/sbin/ifup"
inst_script "$moddir/dhclient-script.sh" "/sbin/dhclient-script"
inst_simple -H "/etc/dhclient.conf"
cat "$moddir/dhclient.conf" >> "${initdir}/etc/dhclient.conf"
inst_hook pre-udev 60 "$moddir/net-genrules.sh"
inst_hook cmdline 92 "$moddir/parse-ibft.sh"
inst_hook cmdline 95 "$moddir/parse-vlan.sh"
inst_hook cmdline 96 "$moddir/parse-bond.sh"
inst_hook cmdline 96 "$moddir/parse-team.sh"
inst_hook cmdline 97 "$moddir/parse-bridge.sh"
inst_hook cmdline 98 "$moddir/parse-ip-opts.sh"
inst_hook cmdline 99 "$moddir/parse-ifname.sh"
inst_hook cleanup 10 "$moddir/kill-dhclient.sh"
# install all config files for teaming
unset TEAM_MASTER
unset TEAM_CONFIG
unset TEAM_PORT_CONFIG
unset HWADDR
unset SUBCHANNELS
for i in /etc/sysconfig/network-scripts/ifcfg-*; do
[ -e "$i" ] || continue
case "$i" in
*~ | *.bak | *.orig | *.rpmnew | *.rpmorig | *.rpmsave)
continue
;;
esac
(
. "$i"
if ! [ "${ONBOOT}" = "no" -o "${ONBOOT}" = "NO" ] \
&& [ -n "${TEAM_MASTER}${TEAM_CONFIG}${TEAM_PORT_CONFIG}" ]; then
if [ -n "$TEAM_CONFIG" ] && [ -n "$DEVICE" ]; then
mkdir -p $initdir/etc/teamd
printf -- "%s" "$TEAM_CONFIG" > "$initdir/etc/teamd/${DEVICE}.conf"
elif [ -n "$TEAM_PORT_CONFIG" ]; then
inst_simple "$i"
HWADDR="$(echo $HWADDR | sed 'y/ABCDEF/abcdef/')"
if [ -n "$HWADDR" ]; then
ln_r "$i" "/etc/sysconfig/network-scripts/mac-${HWADDR}.conf"
fi
SUBCHANNELS="$(echo $SUBCHANNELS | sed 'y/ABCDEF/abcdef/')"
if [ -n "$SUBCHANNELS" ]; then
ln_r "$i" "/etc/sysconfig/network-scripts/ccw-${SUBCHANNELS}.conf"
fi
fi
fi
)
done
_arch=$(uname -m)
inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*" \
{"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*"
dracut_need_initqueue
}
PK �5�Z���� � 35network-legacy/parse-bond.shnu ȯ�� #!/bin/sh
#
# Format:
# bond=<bondname>[:<bondslaves>[:<options>[:<mtu>]]]
#
# bondslaves is a comma-separated list of physical (ethernet) interfaces
# options is a comma-separated list on bonding options (modinfo bonding for details) in format compatible with initscripts
# if options include multi-valued arp_ip_target option, then its values should be separated by semicolon.
#
# bond without parameters assumes bond=bond0:eth0,eth1:mode=balance-rr
#
# if the mtu is specified, it will be set on the bond master
#
# We translate list of slaves to space-separated here to make it easier to loop over them in ifup
# Ditto for bonding options
parsebond() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
case $# in
0) bondname=bond0; bondslaves="eth0 eth1" ;;
1) bondname=$1; bondslaves="eth0 eth1" ;;
2) bondname=$1; bondslaves=$(str_replace "$2" "," " ") ;;
3) bondname=$1; bondslaves=$(str_replace "$2" "," " "); bondoptions=$(str_replace "$3" "," " ") ;;
4) bondname=$1; bondslaves=$(str_replace "$2" "," " "); bondoptions=$(str_replace "$3" "," " "); bondmtu=$4;;
*) die "bond= requires zero to four parameters" ;;
esac
}
# Parse bond for bondname, bondslaves, bondmode, bondoptions and bondmtu
for bond in $(getargs bond=); do
unset bondname
unset bondslaves
unset bondoptions
unset bondmtu
if [ "$bond" != "bond" ]; then
parsebond "$bond"
fi
# Simple default bond
if [ -z "$bondname" ]; then
bondname=bond0
bondslaves="eth0 eth1"
fi
# Make it suitable for initscripts export
bondoptions=$(str_replace "$bondoptions" ";" ",")
echo "bondname=$bondname" > /tmp/bond.${bondname}.info
echo "bondslaves=\"$bondslaves\"" >> /tmp/bond.${bondname}.info
echo "bondoptions=\"$bondoptions\"" >> /tmp/bond.${bondname}.info
echo "bondmtu=\"$bondmtu\"" >> /tmp/bond.${bondname}.info
done
PK �5�Z�b��< �< 35network-legacy/ifup.shnu ȯ�� #!/bin/sh
#
# We don't need to check for ip= errors here, that is handled by the
# cmdline parser script
#
# without $2 means this is for real netroot case
# or it is for manually bring up network ie. for kdump scp vmcore
PATH=/usr/sbin:/usr/bin:/sbin:/bin
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
# Huh? No $1?
[ -z "$1" ] && exit 1
# $netif reads easier than $1
netif=$1
# loopback is always handled the same way
if [ "$netif" = "lo" ] ; then
ip link set lo up
ip addr add 127.0.0.1/8 dev lo
exit 0
fi
# Run dhclient
do_dhcp() {
# dhclient-script will mark the netif up and generate the online
# event for nfsroot
# XXX add -V vendor class and option parsing per kernel
local _COUNT=0
local _timeout=$(getargs rd.net.timeout.dhcp=)
local _DHCPRETRY=$(getargs rd.net.dhcp.retry=)
_DHCPRETRY=${_DHCPRETRY:-1}
[ -e /tmp/dhclient.$netif.pid ] && return 0
if ! iface_has_carrier $netif; then
warn "No carrier detected on interface $netif"
return 1
fi
if [ ! -e /run/NetworkManager/conf.d/10-dracut-dhclient.conf ]; then
mkdir -p /run/NetworkManager/conf.d
echo '[main]' > /run/NetworkManager/conf.d/10-dracut-dhclient.conf
echo 'dhcp=dhclient' >>/run/NetworkManager/conf.d/10-dracut-dhclient.conf
fi
while [ $_COUNT -lt $_DHCPRETRY ]; do
info "Starting dhcp for interface $netif"
dhclient "$@" \
${_timeout:+--timeout $_timeout} \
-q \
-1 \
-cf /etc/dhclient.conf \
-pf /tmp/dhclient.$netif.pid \
-lf /tmp/dhclient.$netif.lease \
$netif \
&& return 0
_COUNT=$(($_COUNT+1))
[ $_COUNT -lt $_DHCPRETRY ] && sleep 1
done
warn "dhcp for interface $netif failed"
# nuke those files since we failed; we might retry dhcp again if it's e.g.
# `ip=dhcp,dhcp6` and we check for the PID file at the top
rm -f /tmp/dhclient.$netif.{pid,lease}
return 1
}
load_ipv6() {
[ -d /proc/sys/net/ipv6 ] && return
modprobe ipv6
i=0
while [ ! -d /proc/sys/net/ipv6 ]; do
i=$(($i+1))
[ $i -gt 10 ] && break
sleep 0.1
done
}
do_ipv6auto() {
local ret
load_ipv6
echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding
echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra
echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects
linkup $netif
wait_for_ipv6_auto $netif
ret=$?
[ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
return $ret
}
# Handle static ip configuration
do_static() {
strglobin $ip '*:*:*' && load_ipv6
if ! iface_has_carrier "$netif"; then
warn "No carrier detected on interface $netif"
return 1
elif ! linkup "$netif"; then
warn "Could not bring interface $netif up!"
return 1
fi
ip route get "$ip" 2>/dev/null | {
read a rest
if [ "$a" = "local" ]; then
warn "Not assigning $ip to interface $netif, cause it is already assigned!"
return 1
fi
return 0
} || return 1
[ -n "$macaddr" ] && ip link set address $macaddr dev $netif
[ -n "$mtu" ] && ip link set mtu $mtu dev $netif
if strglobin $ip '*:*:*'; then
# note no ip addr flush for ipv6
ip addr add $ip/$mask ${srv:+peer $srv} dev $netif
echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding
echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra
echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects
wait_for_ipv6_dad $netif
else
if [ -z "$srv" ]; then
if command -v arping2 >/dev/null; then
if arping2 -q -C 1 -c 2 -I $netif -0 $ip ; then
warn "Duplicate address detected for $ip for interface $netif."
return 1
fi
else
if ! arping -f -q -D -c 2 -I $netif $ip ; then
warn "Duplicate address detected for $ip for interface $netif."
return 1
fi
fi
fi
ip addr flush dev $netif
ip addr add $ip/$mask ${srv:+peer $srv} brd + dev $netif
fi
[ -n "$gw" ] && echo ip route replace default via $gw dev $netif > /tmp/net.$netif.gw
[ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
return 0
}
get_vid() {
case "$1" in
vlan*)
echo ${1#vlan}
;;
*.*)
echo ${1##*.}
;;
esac
}
# check, if we need VLAN's for this interface
if [ -z "$DO_VLAN_PHY" ] && [ -e /tmp/vlan.${netif}.phy ]; then
unset DO_VLAN
NO_AUTO_DHCP=yes DO_VLAN_PHY=yes ifup "$netif"
modprobe -b -q 8021q
for i in /tmp/vlan.*.${netif}; do
[ -e "$i" ] || continue
unset vlanname
unset phydevice
. "$i"
if [ -n "$vlanname" ]; then
linkup "$phydevice"
ip link add dev "$vlanname" link "$phydevice" type vlan id "$(get_vid $vlanname)"
ifup "$vlanname"
fi
done
exit 0
fi
# Check, if interface is VLAN interface
if ! [ -e /tmp/vlan.${netif}.phy ]; then
for i in /tmp/vlan.${netif}.*; do
[ -e "$i" ] || continue
export DO_VLAN=yes
break
done
fi
# bridge this interface?
if [ -z "$NO_BRIDGE_MASTER" ]; then
for i in /tmp/bridge.*.info; do
[ -e "$i" ] || continue
unset bridgeslaves
unset bridgename
. "$i"
for ethname in $bridgeslaves ; do
[ "$netif" != "$ethname" ] && continue
NO_BRIDGE_MASTER=yes NO_AUTO_DHCP=yes ifup $ethname
linkup $ethname
if [ ! -e /tmp/bridge.$bridgename.up ]; then
ip link add name $bridgename type bridge
echo 0 > /sys/devices/virtual/net/$bridgename/bridge/forward_delay
> /tmp/bridge.$bridgename.up
fi
ip link set dev $ethname master $bridgename
ifup $bridgename
exit 0
done
done
fi
# enslave this interface to bond?
if [ -z "$NO_BOND_MASTER" ]; then
for i in /tmp/bond.*.info; do
[ -e "$i" ] || continue
unset bondslaves
unset bondname
. "$i"
for slave in $bondslaves ; do
[ "$netif" != "$slave" ] && continue
# already setup
[ -e /tmp/bond.$bondname.up ] && exit 0
# wait for all slaves to show up
for slave in $bondslaves ; do
# try to create the slave (maybe vlan or bridge)
NO_BOND_MASTER=yes NO_AUTO_DHCP=yes ifup $slave
if ! ip link show dev $slave >/dev/null 2>&1; then
# wait for the last slave to show up
exit 0
fi
done
modprobe -q -b bonding
echo "+$bondname" > /sys/class/net/bonding_masters 2>/dev/null
ip link set $bondname down
# Stolen from ifup-eth
# add the bits to setup driver parameters here
for arg in $bondoptions ; do
key=${arg%%=*};
value=${arg##*=};
# %{value:0:1} is replaced with non-bash specific construct
if [ "${key}" = "arp_ip_target" -a "${#value}" != "0" -a "+${value%%+*}" != "+" ]; then
OLDIFS=$IFS;
IFS=',';
for arp_ip in $value; do
echo +$arp_ip > /sys/class/net/${bondname}/bonding/$key
done
IFS=$OLDIFS;
else
echo $value > /sys/class/net/${bondname}/bonding/$key
fi
done
linkup $bondname
for slave in $bondslaves ; do
cat /sys/class/net/$slave/address > /tmp/net.${bondname}.${slave}.hwaddr
ip link set $slave down
echo "+$slave" > /sys/class/net/$bondname/bonding/slaves
linkup $slave
done
# Set mtu on bond master
[ -n "$bondmtu" ] && ip link set mtu $bondmtu dev $bondname
# add the bits to setup the needed post enslavement parameters
for arg in $bondoptions ; do
key=${arg%%=*};
value=${arg##*=};
if [ "${key}" = "primary" ]; then
echo $value > /sys/class/net/${bondname}/bonding/$key
fi
done
> /tmp/bond.$bondname.up
NO_BOND_MASTER=yes ifup $bondname
exit $?
done
done
fi
if [ -z "$NO_TEAM_MASTER" ]; then
for i in /tmp/team.*.info; do
[ -e "$i" ] || continue
unset teammaster
unset teamslaves
. "$i"
for slave in $teamslaves ; do
[ "$netif" != "$slave" ] && continue
[ -e /tmp/team.$teammaster.up ] && exit 0
# wait for all slaves to show up
for slave in $teamslaves ; do
# try to create the slave (maybe vlan or bridge)
NO_TEAM_MASTER=yes NO_AUTO_DHCP=yes ifup $slave
if ! ip link show dev $slave >/dev/null 2>&1; then
# wait for the last slave to show up
exit 0
fi
done
if [ ! -e /tmp/team.$teammaster.up ] ; then
# We shall only bring up those _can_ come up
# in case of some slave is gone in active-backup mode
working_slaves=""
for slave in $teamslaves ; do
teamdctl ${teammaster} port present ${slave} 2>/dev/null \
&& continue
ip link set dev $slave up 2>/dev/null
if wait_for_if_up $slave; then
working_slaves="$working_slaves$slave "
fi
done
# Do not add slaves now
teamd -d -U -n -N -t $teammaster -f /etc/teamd/${teammaster}.conf
for slave in $working_slaves; do
# team requires the slaves to be down before joining team
ip link set dev $slave down
(
unset TEAM_PORT_CONFIG
_hwaddr=$(cat /sys/class/net/$slave/address)
_subchannels=$(iface_get_subchannels "$slave")
if [ -n "$_hwaddr" ] && [ -e "/etc/sysconfig/network-scripts/mac-${_hwaddr}.conf" ]; then
. "/etc/sysconfig/network-scripts/mac-${_hwaddr}.conf"
elif [ -n "$_subchannels" ] && [ -e "/etc/sysconfig/network-scripts/ccw-${_subchannels}.conf" ]; then
. "/etc/sysconfig/network-scripts/ccw-${_subchannels}.conf"
elif [ -e "/etc/sysconfig/network-scripts/ifcfg-${slave}" ]; then
. "/etc/sysconfig/network-scripts/ifcfg-${slave}"
fi
if [ -n "${TEAM_PORT_CONFIG}" ]; then
/usr/bin/teamdctl ${teammaster} port config update ${slave} "${TEAM_PORT_CONFIG}"
fi
)
teamdctl $teammaster port add $slave
done
ip link set dev $teammaster up
> /tmp/team.$teammaster.up
NO_TEAM_MASTER=yes ifup $teammaster
exit $?
fi
done
done
fi
# all synthetic interfaces done.. now check if the interface is available
if ! ip link show dev $netif >/dev/null 2>&1; then
exit 1
fi
# disable manual ifup while netroot is set for simplifying our logic
# in netroot case we prefer netroot to bringup $netif automaticlly
[ -n "$2" -a "$2" = "-m" ] && [ -z "$netroot" ] && manualup="$2"
if [ -n "$manualup" ]; then
>/tmp/net.$netif.manualup
rm -f /tmp/net.${netif}.did-setup
else
[ -e /tmp/net.${netif}.did-setup ] && exit 0
[ -z "$DO_VLAN" ] && \
[ -e /sys/class/net/$netif/address ] && \
[ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && exit 0
fi
# No ip lines default to dhcp
ip=$(getarg ip)
if [ -z "$NO_AUTO_DHCP" ] && [ -z "$ip" ]; then
if [ "$netroot" = "dhcp6" ]; then
do_dhcp -6
else
do_dhcp -4
fi
for s in $(getargs nameserver); do
[ -n "$s" ] || continue
echo nameserver $s >> /tmp/net.$netif.resolv.conf
done
fi
# Specific configuration, spin through the kernel command line
# looking for ip= lines
for p in $(getargs ip=); do
ip_to_var $p
# skip ibft
[ "$autoconf" = "ibft" ] && continue
case "$dev" in
??:??:??:??:??:??) # MAC address
_dev=$(iface_for_mac $dev)
[ -n "$_dev" ] && dev="$_dev"
;;
??-??-??-??-??-??) # MAC address in BOOTIF form
_dev=$(iface_for_mac $(fix_bootif $dev))
[ -n "$_dev" ] && dev="$_dev"
;;
esac
# If this option isn't directed at our interface, skip it
if [ -n "$dev" ]; then
if [ "$dev" != "$netif" ]; then
[ ! -e "/sys/class/net/$dev" ] \
&& warn "Network interface '$dev' does not exist!"
continue
fi
else
iface_is_enslaved "$netif" && continue
fi
# Store config for later use
for i in ip srv gw mask hostname macaddr mtu dns1 dns2; do
eval '[ "$'$i'" ] && echo '$i'="$'$i'"'
done > /tmp/net.$netif.override
for autoopt in $(str_replace "$autoconf" "," " "); do
case $autoopt in
dhcp|on|any)
do_dhcp -4 ;;
dhcp6)
load_ipv6
do_dhcp -6 ;;
auto6)
do_ipv6auto ;;
either6)
do_ipv6auto || do_dhcp -6 ;;
*)
do_static ;;
esac
done
ret=$?
# setup nameserver
for s in "$dns1" "$dns2" $(getargs nameserver); do
[ -n "$s" ] || continue
echo nameserver $s >> /tmp/net.$netif.resolv.conf
done
if [ $ret -eq 0 ]; then
> /tmp/net.${netif}.up
if [ -z "$DO_VLAN" ] && [ -e /sys/class/net/${netif}/address ]; then
> /tmp/net.$(cat /sys/class/net/${netif}/address).up
fi
# and finally, finish interface set up if there isn't already a script
# to do so (which is the case in the dhcp path)
if [ ! -e $hookdir/initqueue/setup_net_$netif.sh ]; then
setup_net $netif
source_hook initqueue/online $netif
if [ -z "$manualup" ]; then
/sbin/netroot $netif
fi
fi
exit $ret
fi
done
# no ip option directed at our interface?
if [ -z "$NO_AUTO_DHCP" ] && [ ! -e /tmp/net.${netif}.up ]; then
if [ -e /tmp/net.bootdev ]; then
BOOTDEV=$(cat /tmp/net.bootdev)
if [ "$netif" = "$BOOTDEV" ] || [ "$BOOTDEV" = "$(cat /sys/class/net/${netif}/address)" ]; then
load_ipv6
do_dhcp
fi
else
if getargs 'ip=dhcp6'; then
load_ipv6
do_dhcp -6
fi
if getargs 'ip=dhcp'; then
do_dhcp -4
fi
fi
fi
exit 0
PK �5�ZO>��V V ! 35network-legacy/parse-ip-opts.shnu ȯ�� #!/bin/sh
#
# Format:
# ip=[dhcp|on|any]
#
# ip=<interface>:[dhcp|on|any][:[<mtu>][:<macaddr>]]
#
# ip=<client-IP-number>:<server-IP-number>:<gateway-IP-number>:<netmask>:<client-hostname>:<interface>:{dhcp|on|any|none|off}[:[<mtu>][:<macaddr>]]
#
# When supplying more than only ip= line, <interface> is mandatory and
# bootdev= must contain the name of the primary interface to use for
# routing,dns,dhcp-options,etc.
#
command -v getarg >/dev/null || . /lib/dracut-lib.sh
if [ -n "$netroot" ] && [ -z "$(getarg ip=)" ] && [ -z "$(getarg BOOTIF=)" ]; then
# No ip= argument(s) for netroot provided, defaulting to DHCP
return;
fi
# Count ip= lines to decide whether we need bootdev= or not
if [ -z "$NEEDBOOTDEV" ] ; then
count=0
for p in $(getargs ip=); do
case "$p" in
ibft)
continue;;
esac
count=$(( $count + 1 ))
done
[ $count -gt 1 ] && NEEDBOOTDEV=1
fi
unset count
# If needed, check if bootdev= contains anything usable
BOOTDEV=$(getarg bootdev=)
if [ -n "$NEEDBOOTDEV" ] && getargbool 1 rd.neednet; then
#[ -z "$BOOTDEV" ] && warn "Please supply bootdev argument for multiple ip= lines"
echo "rd.neednet=1" > /etc/cmdline.d/dracut-neednet.conf
info "Multiple ip= arguments: assuming rd.neednet=1"
else
unset NEEDBOOTDEV
fi
# Check ip= lines
# XXX Would be nice if we could errorcheck ip addresses here as well
for p in $(getargs ip=); do
ip_to_var $p
# make first device specified the BOOTDEV
if [ -n "$NEEDBOOTDEV" ] && [ -z "$BOOTDEV" ] && [ -n "$dev" ]; then
BOOTDEV="$dev"
info "Setting bootdev to '$BOOTDEV'"
fi
# skip ibft since we did it above
[ "$autoconf" = "ibft" ] && continue
# Empty autoconf defaults to 'dhcp'
if [ -z "$autoconf" ] ; then
warn "Empty autoconf values default to dhcp"
autoconf="dhcp"
fi
# Error checking for autoconf in combination with other values
for autoopt in $(str_replace "$autoconf" "," " "); do
case $autoopt in
error) die "Error parsing option 'ip=$p'";;
bootp|rarp|both) die "Sorry, ip=$autoopt is currenty unsupported";;
none|off)
[ -z "$ip" ] && \
die "For argument 'ip=$p'\nValue '$autoopt' without static configuration does not make sense"
[ -z "$mask" ] && \
die "Sorry, automatic calculation of netmask is not yet supported"
;;
auto6);;
either6);;
dhcp|dhcp6|on|any) \
[ -n "$NEEDBOOTDEV" ] && [ -z "$dev" ] && \
die "Sorry, 'ip=$p' does not make sense for multiple interface configurations"
[ -n "$ip" ] && \
die "For argument 'ip=$p'\nSorry, setting client-ip does not make sense for '$autoopt'"
;;
*) die "For argument 'ip=$p'\nSorry, unknown value '$autoopt'";;
esac
done
if [ -n "$dev" ] ; then
# We don't like duplicate device configs
if [ -n "$IFACES" ] ; then
for i in $IFACES ; do
[ "$dev" = "$i" ] && die "For argument 'ip=$p'\nDuplication configurations for '$dev'"
done
fi
# IFACES list for later use
IFACES="$IFACES $dev"
# Interface should exist
if [ ! -e "/sys/class/net/$dev" ]; then
warn "Network interface '$dev' does not exist"
fi
fi
# Do we need to check for specific options?
if [ -n "$NEEDDHCP" ] || [ -n "$DHCPORSERVER" ] ; then
# Correct device? (Empty is ok as well)
[ "$dev" = "$BOOTDEV" ] || continue
# Server-ip is there?
[ -n "$DHCPORSERVER" ] && [ -n "$srv" ] && continue
# dhcp? (It's simpler to check for a set ip. Checks above ensure that if
# ip is there, we're static
[ -z "$ip" ] && continue
# Not good!
die "Server-ip or dhcp for netboot needed, but current arguments say otherwise"
fi
if str_starts "$dev" "enx" && [ ${#dev} -eq 15 ]; then
printf -- "ifname=%s:%s:%s:%s:%s:%s:%s\n" \
"$dev" \
"${dev:3:2}" \
"${dev:5:2}" \
"${dev:7:2}" \
"${dev:9:2}" \
"${dev:11:2}" \
"${dev:13:2}" >> /etc/cmdline.d/80-enx.conf
fi
done
# put BOOTIF in IFACES to make sure it comes up
if getargbool 1 "rd.bootif" && BOOTIF="$(getarg BOOTIF=)"; then
BOOTDEV=$(fix_bootif $BOOTIF)
IFACES="$BOOTDEV $IFACES"
fi
# This ensures that BOOTDEV is always first in IFACES
if [ -n "$BOOTDEV" ] && [ -n "$IFACES" ] ; then
IFACES="${IFACES%$BOOTDEV*} ${IFACES#*$BOOTDEV}"
IFACES="$BOOTDEV $IFACES"
fi
# Store BOOTDEV and IFACES for later use
[ -n "$BOOTDEV" ] && echo $BOOTDEV > /tmp/net.bootdev
[ -n "$IFACES" ] && echo $IFACES > /tmp/net.ifaces
PK �5�Z�e��
35network-legacy/net-genrules.shnu ȯ�� #!/bin/sh
getargbool 0 rd.neednet && NEEDNET=1
# Don't continue if we don't need network
if [ -z "$netroot" ] && [ ! -e "/tmp/net.ifaces" ] && [ "$NEEDNET" != "1" ]; then
return
fi
command -v fix_bootif >/dev/null || . /lib/net-lib.sh
# Write udev rules
{
# bridge: attempt only the defined interface
for i in /tmp/bridge.*.info; do
[ -e "$i" ] || continue
unset bridgeslaves
unset bridgename
. "$i"
RAW_IFACES="$RAW_IFACES $bridgeslaves"
MASTER_IFACES="$MASTER_IFACES $bridgename"
done
# bond: attempt only the defined interface (override bridge defines)
for i in /tmp/bond.*.info; do
[ -e "$i" ] || continue
unset bondslaves
unset bondname
. "$i"
# It is enough to fire up only one
RAW_IFACES="$RAW_IFACES $bondslaves"
MASTER_IFACES="$MASTER_IFACES ${bondname}"
done
for i in /tmp/team.*.info; do
[ -e "$i" ] || continue
unset teamslaves
unset teammaster
. "$i"
RAW_IFACES="$RAW_IFACES ${teamslaves}"
MASTER_IFACES="$MASTER_IFACES ${teammaster}"
done
for i in /tmp/vlan.*.phy; do
[ -e "$i" ] || continue
unset phydevice
. "$i"
RAW_IFACES="$RAW_IFACES $phydevice"
for j in /tmp/vlan.*.${phydevice}; do
[ -e "$j" ] || continue
unset vlanname
. "$j"
MASTER_IFACES="$MASTER_IFACES ${vlanname}"
done
done
MASTER_IFACES="$(trim "$MASTER_IFACES")"
RAW_IFACES="$(trim "$RAW_IFACES")"
if [ -z "$IFACES" ]; then
[ -e /tmp/net.ifaces ] && read IFACES < /tmp/net.ifaces
fi
if [ -e /tmp/net.bootdev ]; then
bootdev=$(cat /tmp/net.bootdev)
fi
ifup='/sbin/ifup $env{INTERFACE}'
runcmd="RUN+=\"/sbin/initqueue --name ifup-\$env{INTERFACE} --unique --onetime $ifup\""
# We have some specific interfaces to handle
if [ -n "${RAW_IFACES}${IFACES}" ]; then
echo 'SUBSYSTEM!="net", GOTO="net_end"'
echo 'ACTION!="add|change|move", GOTO="net_end"'
for iface in $IFACES $RAW_IFACES; do
case "$iface" in
??:??:??:??:??:??) # MAC address
cond="ATTR{address}==\"$iface\""
echo "$cond, $runcmd, GOTO=\"net_end\""
;;
??-??-??-??-??-??) # MAC address in BOOTIF form
cond="ATTR{address}==\"$(fix_bootif $iface)\""
echo "$cond, $runcmd, GOTO=\"net_end\""
;;
*) # an interface name
cond="ENV{INTERFACE}==\"$iface\""
echo "$cond, $runcmd, GOTO=\"net_end\""
cond="NAME==\"$iface\""
echo "$cond, $runcmd, GOTO=\"net_end\""
;;
esac
# The GOTO prevents us from trying to ifup the same device twice
done
echo 'LABEL="net_end"'
for iface in $IFACES; do
if [ "$bootdev" = "$iface" ] || [ "$NEEDNET" = "1" ]; then
if [ -n "$netroot" ] && [ -n "$DRACUT_SYSTEMD" ]; then
echo "systemctl is-active initrd-root-device.target || [ -f /tmp/net.${iface}.did-setup ]"
else
echo "[ -f /tmp/net.${iface}.did-setup ]"
fi >$hookdir/initqueue/finished/wait-$iface.sh
fi
done
# Default: We don't know the interface to use, handle all
# Fixme: waiting for the interface as well.
else
cond='ACTION=="add", SUBSYSTEM=="net", ENV{DEVTYPE}!="wlan|wwan"'
# if you change the name of "91-default-net.rules", also change modules.d/80cms/cmssetup.sh
echo "$cond, $runcmd" > /etc/udev/rules.d/91-default-net.rules
if [ "$NEEDNET" = "1" ]; then
echo 'for i in /tmp/net.*.did-setup; do [ -f "$i" ] && exit 0; done; exit 1' >$hookdir/initqueue/finished/wait-network.sh
fi
fi
# if you change the name of "90-net.rules", also change modules.d/80cms/cmssetup.sh
} > /etc/udev/rules.d/90-net.rules
PK �5�Z ��@/ / 35network-legacy/dhclient.confnu �[���
option classless-static-routes code 121 = array of unsigned integer 8;
send dhcp-client-identifier = hardware;
request subnet-mask, broadcast-address, time-offset, routers,
domain-name, domain-name-servers, domain-search, host-name,
root-path, interface-mtu, classless-static-routes;
PK �5�Z�40�� � 35network-legacy/parse-vlan.shnu ȯ�� #!/bin/sh
#
# Format:
# vlan=<vlanname>:<phydevice>
#
parsevlan() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
unset vlanname phydevice
case $# in
2) vlanname=$1; phydevice=$2 ;;
*) die "vlan= requires two parameters" ;;
esac
}
for vlan in $(getargs vlan=); do
unset vlanname
unset phydevice
if [ ! "$vlan" = "vlan" ]; then
parsevlan "$vlan"
fi
echo "phydevice=\"$phydevice\"" > /tmp/vlan.${phydevice}.phy
{
echo "vlanname=\"$vlanname\""
echo "phydevice=\"$phydevice\""
} > /tmp/vlan.${vlanname}.${phydevice}
done
PK �5�Z�T � 35network-legacy/parse-ibft.shnu ȯ�� #!/bin/sh
command -v getarg >/dev/null || . /lib/dracut-lib.sh
command -v ibft_to_cmdline >/dev/null || . /lib/net-lib.sh
if getargbool 0 rd.iscsi.ibft -d "ip=ibft"; then
modprobe -b -q iscsi_boot_sysfs 2>/dev/null
modprobe -b -q iscsi_ibft
ibft_to_cmdline
fi
PK �5�Z����$ �$ # 35network-legacy/dhclient-script.shnu ȯ�� #!/bin/sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
# We already need a set netif here
netif=$interface
setup_interface() {
ip=$new_ip_address
mtu=$new_interface_mtu
mask=$new_subnet_mask
bcast=$new_broadcast_address
gw=${new_routers%%,*}
domain=$new_domain_name
search=$(printf -- "$new_domain_search")
namesrv=$new_domain_name_servers
hostname=$new_host_name
[ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
[ -n "$new_max_life" ] && lease_time=$new_max_life
preferred_lft=$lease_time
[ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
[ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override
# Taken from debian dhclient-script:
# The 576 MTU is only used for X.25 and dialup connections
# where the admin wants low latency. Such a low MTU can cause
# problems with UDP traffic, among other things. As such,
# disallow MTUs from 576 and below by default, so that broken
# MTUs are ignored, but higher stuff is allowed (1492, 1500, etc).
if [ -n "$mtu" ] && [ $mtu -gt 576 ] ; then
if ! ip link set $netif mtu $mtu ; then
ip link set $netif down
ip link set $netif mtu $mtu
linkup $netif
fi
fi
ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} dev $netif \
${lease_time:+valid_lft $lease_time} \
${preferred_lft:+preferred_lft ${preferred_lft}}
if [ -n "$gw" ] ; then
if [ "$mask" = "255.255.255.255" ] ; then
# point-to-point connection => set explicit route to gateway
echo ip route add $gw dev $netif > /tmp/net.$netif.gw
fi
echo "$gw" | {
IFS=' ' read -r main_gw other_gw
echo ip route replace default via $main_gw dev $netif >> /tmp/net.$netif.gw
if [ -n "$other_gw" ] ; then
for g in $other_gw; do
echo ip route add default via $g dev $netif >> /tmp/net.$netif.gw
done
fi
}
fi
if getargbool 1 rd.peerdns; then
[ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
if [ -n "$namesrv" ] ; then
for s in $namesrv; do
echo nameserver $s
done
fi >> /tmp/net.$netif.resolv.conf
fi
# Note: hostname can be fqdn OR short hostname, so chop off any
# trailing domain name and explicity add any domain if set.
[ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain:+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
}
setup_interface6() {
domain=$new_domain_name
search=$(printf -- "$new_dhcp6_domain_search")
namesrv=$new_dhcp6_name_servers
hostname=$new_host_name
[ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
[ -n "$new_max_life" ] && lease_time=$new_max_life
preferred_lft=$lease_time
[ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
[ -f /tmp/net.$netif.override ] && . /tmp/net.$netif.override
ip -6 addr add ${new_ip6_address}/${new_ip6_prefixlen} \
dev ${netif} scope global \
${lease_time:+valid_lft $lease_time} \
${preferred_lft:+preferred_lft ${preferred_lft}}
if getargbool 1 rd.peerdns; then
[ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
if [ -n "$namesrv" ] ; then
for s in $namesrv; do
echo nameserver $s
done
fi >> /tmp/net.$netif.resolv.conf
fi
# Note: hostname can be fqdn OR short hostname, so chop off any
# trailing domain name and explicity add any domain if set.
[ -n "$hostname" ] && echo "echo ${hostname%.$domain}${domain:+.$domain} > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
}
parse_option_121() {
while [ $# -ne 0 ]; do
mask="$1"
shift
# Is the destination a multicast group?
if [ $1 -ge 224 -a $1 -lt 240 ]; then
multicast=1
else
multicast=0
fi
# Parse the arguments into a CIDR net/mask string
if [ $mask -gt 24 ]; then
destination="$1.$2.$3.$4/$mask"
shift; shift; shift; shift
elif [ $mask -gt 16 ]; then
destination="$1.$2.$3.0/$mask"
shift; shift; shift
elif [ $mask -gt 8 ]; then
destination="$1.$2.0.0/$mask"
shift; shift
elif [ $mask -gt 0 ]; then
destination="$1.0.0.0/$mask"
shift
else
destination="0.0.0.0/$mask"
fi
# Read the gateway
gateway="$1.$2.$3.$4"
shift; shift; shift; shift
# Multicast routing on Linux
# - If you set a next-hop address for a multicast group, this breaks with Cisco switches
# - If you simply leave it link-local and attach it to an interface, it works fine.
if [ $multicast -eq 1 -o "$gateway" = "0.0.0.0" ]; then
temp_result="$destination dev $interface"
else
temp_result="$destination via $gateway dev $interface"
fi
echo "/sbin/ip route add $temp_result"
done
}
case $reason in
PREINIT)
echo "dhcp: PREINIT $netif up"
linkup $netif
;;
PREINIT6)
echo "dhcp: PREINIT6 $netif up"
linkup $netif
wait_for_ipv6_dad_link $netif
;;
BOUND)
echo "dhcp: BOND setting $netif"
unset layer2
if [ -f /sys/class/net/$netif/device/layer2 ]; then
read layer2 < /sys/class/net/$netif/device/layer2
fi
if [ "$layer2" != "0" ]; then
if command -v arping2 >/dev/null; then
if arping2 -q -C 1 -c 2 -I $netif -0 $new_ip_address ; then
warn "Duplicate address detected for $new_ip_address while doing dhcp. retrying"
exit 1
fi
else
if ! arping -f -q -D -c 2 -I $netif $new_ip_address ; then
warn "Duplicate address detected for $new_ip_address while doing dhcp. retrying"
exit 1
fi
fi
fi
unset layer2
setup_interface
set | while read line || [ -n "$line" ]; do
[ "${line#new_}" = "$line" ] && continue
echo "$line"
done >/tmp/dhclient.$netif.dhcpopts
{
echo '. /lib/net-lib.sh'
echo "setup_net $netif"
if [ -n "$new_classless_static_routes" ]; then
OLDIFS="$IFS"
IFS=".$IFS"
parse_option_121 $new_classless_static_routes
IFS="$OLDIFS"
fi
echo "source_hook initqueue/online $netif"
[ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
} > $hookdir/initqueue/setup_net_$netif.sh
echo "[ -f /tmp/net.$netif.did-setup ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
>/tmp/net.$netif.up
if [ -e /sys/class/net/${netif}/address ]; then
> /tmp/net.$(cat /sys/class/net/${netif}/address).up
fi
;;
RENEW|REBIND)
unset lease_time
[ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
[ -n "$new_max_life" ] && lease_time=$new_max_life
preferred_lft=$lease_time
[ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
ip -4 addr change ${new_ip_address}/${new_subnet_mask} broadcast ${new_broadcast_address} dev ${interface} \
${lease_time:+valid_lft $lease_time} ${preferred_lft:+preferred_lft ${preferred_lft}} \
>/dev/null 2>&1
;;
BOUND6)
echo "dhcp: BOND6 setting $netif"
setup_interface6
set | while read line || [ -n "$line" ]; do
[ "${line#new_}" = "$line" ] && continue
echo "$line"
done >/tmp/dhclient.$netif.dhcpopts
{
echo '. /lib/net-lib.sh'
echo "setup_net $netif"
echo "source_hook initqueue/online $netif"
[ -e /tmp/net.$netif.manualup ] || echo "/sbin/netroot $netif"
echo "rm -f -- $hookdir/initqueue/setup_net_$netif.sh"
} > $hookdir/initqueue/setup_net_$netif.sh
echo "[ -f /tmp/net.$netif.did-setup ]" > $hookdir/initqueue/finished/dhclient-$netif.sh
>/tmp/net.$netif.up
if [ -e /sys/class/net/${netif}/address ]; then
> /tmp/net.$(cat /sys/class/net/${netif}/address).up
fi
;;
RENEW6|REBIND6)
unset lease_time
[ -n "$new_dhcp_lease_time" ] && lease_time=$new_dhcp_lease_time
[ -n "$new_max_life" ] && lease_time=$new_max_life
preferred_lft=$lease_time
[ -n "$new_preferred_life" ] && preferred_lft=$new_preferred_life
ip -6 addr change ${new_ip6_address}/${new_ip6_prefixlen} dev ${interface} scope global \
${lease_time:+valid_lft $lease_time} ${preferred_lft:+preferred_lft ${preferred_lft}} \
>/dev/null 2>&1
;;
*) echo "dhcp: $reason";;
esac
exit 0
PK �5�Z?� )d d 35network-legacy/parse-bridge.shnu ȯ�� #!/bin/sh
#
# Format:
# bridge=<bridgename>:<bridgeslaves>
#
# <bridgeslaves> is a comma-separated list of physical (ethernet) interfaces
# bridge without parameters assumes bridge=br0:eth0
#
parsebridge() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
case $# in
0) bridgename=br0; bridgeslaves=$iface ;;
1) die "bridge= requires two parameters" ;;
2) bridgename=$1; bridgeslaves=$(str_replace "$2" "," " ") ;;
*) die "bridge= requires two parameters" ;;
esac
}
# Parse bridge for bridgename and bridgeslaves
for bridge in $(getargs bridge=); do
unset bridgename
unset bridgeslaves
iface=eth0
# Read bridge= parameters if they exist
if [ "$bridge" != "bridge" ]; then
parsebridge $bridge
fi
# Simple default bridge
if [ -z "$bridgename" ]; then
bridgename=br0
bridgeslaves=$iface
fi
echo "bridgename=$bridgename" > /tmp/bridge.${bridgename}.info
echo "bridgeslaves=\"$bridgeslaves\"" >> /tmp/bridge.${bridgename}.info
done
PK �5�Zn�d( ( 35network-legacy/parse-ifname.shnu ȯ�� #!/bin/sh
#
# Format:
# ifname=<interface>:<mac>
#
# Note letters in the macaddress must be lowercase!
#
# Examples:
# ifname=eth0:4a:3f:4c:04:f8:d7
#
# Note when using ifname= to get persistent interface names, you must specify
# an ifname= argument for each interface used in an ip= or fcoe= argument
# check if there are any ifname parameters
if ! getarg ifname= >/dev/null ; then
return
fi
command -v parse_ifname_opts >/dev/null || . /lib/net-lib.sh
# Check ifname= lines
for p in $(getargs ifname=); do
parse_ifname_opts $p
done
PK �5�Z6U�@ @ 35network-legacy/parse-team.shnu ȯ�� #!/bin/sh
#
# Format:
# team=<teammaster>:<teamslaves>[:<teamrunner>]
#
# teamslaves is a comma-separated list of physical (ethernet) interfaces
# teamrunner is the runner type to be used (see teamd.conf(5)); defaults to activebackup
#
# team without parameters assumes team=team0:eth0,eth1:activebackup
#
parseteam() {
local v=${1}:
set --
while [ -n "$v" ]; do
set -- "$@" "${v%%:*}"
v=${v#*:}
done
case $# in
0) teammaster=team0; teamslaves="eth0 eth1"; teamrunner="activebackup" ;;
1) teammaster=$1; teamslaves="eth0 eth1"; teamrunner="activebackup" ;;
2) teammaster=$1; teamslaves=$(str_replace "$2" "," " "); teamrunner="activebackup" ;;
3) teammaster=$1; teamslaves=$(str_replace "$2" "," " "); teamrunner=$3 ;;
*) die "team= requires zero to three parameters" ;;
esac
return 0
}
for team in $(getargs team); do
[ "$team" = "team" ] && continue
unset teammaster
unset teamslaves
unset teamrunner
parseteam "$team" || continue
echo "teammaster=$teammaster" > /tmp/team.${teammaster}.info
echo "teamslaves=\"$teamslaves\"" >> /tmp/team.${teammaster}.info
echo "teamrunner=\"$teamrunner\"" >> /tmp/team.${teammaster}.info
if ! [ -e /etc/teamd/${teammaster}.conf ]; then
warn "Team master $teammaster specified, but no /etc/teamd/$teammaster.conf present. Using $teamrunner."
mkdir -p /etc/teamd
printf -- "%s" "{\"runner\": {\"name\": \"$teamrunner\"}, \"link_watch\": {\"name\": \"ethtool\"}}" > "/tmp/${teammaster}.conf"
fi
done
PK �5�Z����� � ! 35network-legacy/kill-dhclient.shnu ȯ�� #!/bin/sh
for f in /tmp/dhclient.*.pid; do
[ -e $f ] || continue
read PID < $f;
kill $PID >/dev/null 2>&1
done
sleep 0.1
for f in /tmp/dhclient.*.pid; do
[ -e $f ] || continue
read PID < $f;
kill -9 $PID >/dev/null 2>&1
done
PK �5�Zd�aE� � 04watchdog/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
echo watchdog-modules
return 0
}
# called by dracut
install() {
# Do not add watchdog hooks if systemd module is included
# In that case, systemd will manage watchdog kick
if ! dracut_module_included "systemd"; then
inst_hook cmdline 00 "$moddir/watchdog.sh"
inst_hook cmdline 50 "$moddir/watchdog.sh"
inst_hook pre-trigger 00 "$moddir/watchdog.sh"
inst_hook initqueue 00 "$moddir/watchdog.sh"
inst_hook mount 00 "$moddir/watchdog.sh"
inst_hook mount 50 "$moddir/watchdog.sh"
inst_hook mount 99 "$moddir/watchdog.sh"
inst_hook pre-pivot 00 "$moddir/watchdog.sh"
inst_hook pre-pivot 99 "$moddir/watchdog.sh"
inst_hook cleanup 00 "$moddir/watchdog.sh"
inst_hook cleanup 99 "$moddir/watchdog.sh"
fi
inst_hook emergency 02 "$moddir/watchdog-stop.sh"
inst_multiple -o wdctl
}
PK �5�Z6u��= = 04watchdog/watchdog-stop.shnu ȯ�� #!/bin/sh
[ -c /dev/watchdog ] && printf 'V' > /dev/watchdog
PK �5�Z�� � 04watchdog/watchdog.shnu ȯ�� #!/bin/sh
if [ -e /dev/watchdog ]; then
if [ ! -e /tmp/watchdog_timeout ]; then
wdctl -s 60 /dev/watchdog >/dev/null 2>&1
> /tmp/watchdog_timeout
fi
info "Triggering watchdog"
>/dev/watchdog
else
modprobe ib700wdt
modprobe i6300esb
fi
PK �5�ZA�|y
95udev-rules/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
install() {
local _i
# Fixme: would be nice if we didn't have to guess, which rules to grab....
# ultimately, /lib/initramfs/rules.d or somesuch which includes links/copies
# of the rules we want so that we just copy those in would be best
inst_multiple udevadm cat uname blkid
inst_dir /etc/udev
inst_multiple -o /etc/udev/udev.conf
[ -d ${initdir}/$systemdutildir ] || mkdir -p ${initdir}/$systemdutildir
for _i in ${systemdutildir}/systemd-udevd ${udevdir}/udevd /sbin/udevd; do
[ -x "$_i" ] || continue
inst "$_i"
if ! [[ -f ${initdir}${systemdutildir}/systemd-udevd ]]; then
ln -fs "$_i" ${initdir}${systemdutildir}/systemd-udevd
fi
break
done
if ! [[ -e ${initdir}${systemdutildir}/systemd-udevd ]]; then
derror "Cannot find [systemd-]udevd binary!"
exit 1
fi
inst_rules \
40-redhat.rules \
50-firmware.rules \
50-udev.rules \
50-udev-default.rules \
55-scsi-sg3_id.rules \
58-scsi-sg3_symlink.rules \
59-scsi-sg3_utils.rules \
60-block.rules \
60-pcmcia.rules \
60-persistent-storage.rules \
61-persistent-storage-edd.rules \
70-uaccess.rules \
71-seat.rules \
73-seat-late.rules \
75-net-description.rules \
80-drivers.rules 95-udev-late.rules \
80-net-name-slot.rules\
80-net-setup-link.rules \
95-late.rules \
"$moddir/59-persistent-storage.rules" \
"$moddir/61-persistent-storage.rules" \
${NULL}
prepare_udev_rules 59-persistent-storage.rules 61-persistent-storage.rules
# debian udev rules
inst_rules 91-permissions.rules
# eudev rules
inst_rules 80-drivers-modprobe.rules
if dracut_module_included "systemd"; then
inst_multiple -o ${systemdutildir}/network/*.link
[[ $hostonly ]] && inst_multiple -H -o /etc/systemd/network/*.link
fi
{
for i in cdrom tape dialout floppy; do
if ! grep -q "^$i:" "$initdir/etc/group" 2>/dev/null; then
if ! grep "^$i:" /etc/group 2>/dev/null; then
case $i in
cdrom) echo "$i:x:11:";;
dialout) echo "$i:x:18:";;
floppy) echo "$i:x:19:";;
tape) echo "$i:x:33:";;
esac
fi
fi
done
} >> "$initdir/etc/group"
inst_multiple -o \
${udevdir}/ata_id \
${udevdir}/cdrom_id \
${udevdir}/create_floppy_devices \
${udevdir}/edd_id \
${udevdir}/firmware.sh \
${udevdir}/firmware \
${udevdir}/firmware.agent \
${udevdir}/hotplug.functions \
${udevdir}/fw_unit_symlinks.sh \
${udevdir}/hid2hci \
${udevdir}/path_id \
${udevdir}/input_id \
${udevdir}/scsi_id \
${udevdir}/usb_id \
${udevdir}/pcmcia-socket-startup \
${udevdir}/pcmcia-check-broken-cis
inst_multiple -o /etc/pcmcia/config.opts
[ -f /etc/arch-release ] && \
inst_script "$moddir/load-modules.sh" /lib/udev/load-modules.sh
inst_libdir_file "libnss_files*"
}
PK �5�Z $� � ( 95udev-rules/61-persistent-storage.rulesnu �[��� SUBSYSTEM!="block", GOTO="pss_end"
ACTION!="add|change", GOTO="pss_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="pss_end"
ACTION=="change", KERNEL=="dm-[0-9]*", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}!="1", GOTO="do_pss"
KERNEL=="cciss[0-9]*", GOTO="do_pss"
KERNEL=="nbd[0-9]*", GOTO="do_pss"
KERNEL=="md[0-9]*|md_d[0-9]*|md/*", GOTO="do_pss"
GOTO="pss_end"
LABEL="do_pss"
# by-path (parent device path)
ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="", DEVPATH!="*/virtual/*", IMPORT PATH_ID
ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}"
ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n"
# by-label/by-uuid links (filesystem metadata)
ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
LABEL="pss_end"
PK �5�Z�|N N 95udev-rules/load-modules.shnu ȯ�� #!/bin/sh
# Implement blacklisting for udev-loaded modules
modprobe -b "$@"
PK �5�Z�*�A ( 95udev-rules/59-persistent-storage.rulesnu �[��� SUBSYSTEM!="block", GOTO="ps_end"
ACTION!="add|change", GOTO="ps_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="ps_end"
KERNEL=="cciss[0-9]*", IMPORT BLKID
KERNEL=="nbd[0-9]*", IMPORT BLKID
LABEL="ps_end"
PK �5�Z�� / 80lvmthinpool-monitor/start-thinpool-monitor.shnu ȯ�� #!/bin/sh
type getarg > /dev/null 2>&1 || . /lib/dracut-lib.sh
LVS=$(getargs rd.lvm.lv -d rd_LVM_LV=)
is_lvm2_thinp_device() {
_device_path=$1
_lvm2_thin_device=$(lvm lvs -S 'lv_layout=sparse && lv_layout=thin' \
--nosuffix --noheadings -o vg_name,lv_name "$_device_path" 2> /dev/null)
[ -n "$_lvm2_thin_device" ] && return $?
}
for LV in $LVS; do
if is_lvm2_thinp_device "/dev/$LV"; then
THIN_POOLS="$(lvm lvs -S 'lv_layout=sparse && lv_layout=thin' \
--nosuffix --noheadings -o vg_name,pool_lv "$LV" \
| awk '{printf("%s/%s",$1,$2);}') $THIN_POOLS"
fi
done
THIN_POOLS=$(echo "$THIN_POOLS" | tr ' ' '\n' | sort -u | tr '\n' ' ')
if [ -n "$THIN_POOLS" ]; then
if [ -e "/etc/lvm/lvm.conf" ]; then
# Use 'monitoring=0' to override the value in lvm.conf, in case
# dmeventd monitoring been started after the calling.
CONFIG="activation {monitoring=0}"
else
CONFIG="activation {monitoring=0 thin_pool_autoextend_threshold=70 thin_pool_autoextend_percent=20}"
fi
while true; do
for THIN_POOL in $THIN_POOLS; do
lvm lvextend --use-policies --config "$CONFIG" "$THIN_POOL"
done
sleep 5
done &
echo $! > /run/thinpool-moni.pid
fi
PK �5�Z�]�@ @ % 80lvmthinpool-monitor/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
# No point trying to support lvm if the binaries are missing
require_binaries lvm sort tr awk || return 1
return 255
}
# called by dracut
depends() {
echo lvm
return 0
}
# called by dracut
install() {
inst_multiple sort tr awk
inst_script "$moddir/start-thinpool-monitor.sh" "/bin/start-thinpool-monitor"
inst "$moddir/start-thinpool-monitor.service" "$systemdsystemunitdir/start-thinpool-monitor.service"
systemctl -q --root "$initdir" add-wants initrd.target start-thinpool-monitor.service
}
PK �5�Z�)��F F 4 80lvmthinpool-monitor/start-thinpool-monitor.servicenu �[��� [Unit]
Description=Lvm thinpool monitor service
Before=initrd.target
After=initrd-fs.target
Conflicts=shutdown.target emergency.target
[Service]
Type=forking
ExecStart=/bin/start-thinpool-monitor
PIDFile=/run/thinpool-moni.pid
StandardInput=null
StandardOutput=journal+console
StandardError=journal+console
KillSignal=SIGHUP
PK �5�Z� �! ! 45ifcfg/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
[[ -d /etc/sysconfig/network-scripts ]] && return 0
return 255
}
# called by dracut
depends() {
echo "network"
return 0
}
# called by dracut
install() {
inst_binary sort
inst_hook pre-pivot 85 "$moddir/write-ifcfg.sh"
}
PK �5�Z� &��" �" 45ifcfg/write-ifcfg.shnu ȯ�� #!/bin/sh
# NFS root might have reached here before /tmp/net.ifaces was written
type is_persistent_ethernet_name >/dev/null 2>&1 || . /lib/net-lib.sh
udevadm settle --timeout=30
mkdir -m 0755 -p /tmp/ifcfg/
mkdir -m 0755 -p /tmp/ifcfg-leases/
get_config_line_by_subchannel()
{
local CHANNEL
local line
CHANNELS="$1"
while read line || [ -n "$line" ]; do
if strstr "$line" "$CHANNELS"; then
echo $line
return 0
fi
done < /etc/ccw.conf
return 1
}
print_s390() {
local _netif
local SUBCHANNELS
local OPTIONS
local NETTYPE
local CONFIG_LINE
local i
local channel
local OLD_IFS
_netif="$1"
# if we find ccw channel, then use those, instead of
# of the MAC
SUBCHANNELS=$({
for i in /sys/class/net/$_netif/device/cdev[0-9]*; do
[ -e $i ] || continue
channel=$(readlink -f $i)
printf '%s' "${channel##*/},"
done
})
[ -n "$SUBCHANNELS" ] || return 1
SUBCHANNELS=${SUBCHANNELS%,}
echo "SUBCHANNELS=\"${SUBCHANNELS}\""
CONFIG_LINE=$(get_config_line_by_subchannel $SUBCHANNELS)
[ $? -ne 0 -o -z "$CONFIG_LINE" ] && return 0
OLD_IFS=$IFS
IFS=","
set -- $CONFIG_LINE
IFS=$OLD_IFS
NETTYPE=$1
shift
SUBCHANNELS="$1"
OPTIONS=""
shift
while [ $# -gt 0 ]; do
case $1 in
*=*) OPTIONS="$OPTIONS $1";;
esac
shift
done
OPTIONS=${OPTIONS## }
echo "NETTYPE=\"${NETTYPE}\""
echo "OPTIONS=\"${OPTIONS}\""
return 0
}
hw_bind() {
local _netif="$1"
local _macaddr="$2"
[ -n "$_macaddr" ] \
&& echo "MACADDR=\"$_macaddr\""
print_s390 "$_netif" \
&& return 0
[ -n "$_macaddr" ] && return 0
is_persistent_ethernet_name "$_netif" && return 0
[ -f "/sys/class/net/$_netif/addr_assign_type" ] \
&& [ "$(cat "/sys/class/net/$_netif/addr_assign_type")" != "0" ] \
&& return 1
[ -f "/sys/class/net/$_netif/address" ] \
|| return 1
echo "HWADDR=\"$(cat /sys/class/net/$_netif/address)\""
}
interface_bind() {
local _netif="$1"
local _macaddr="$2"
if [ ! -e "/sys/class/net/$_netif" ]; then
derror "Cannot find network interface '$_netif'!"
return 1
fi
# see, if we can bind it to some hw parms
if hw_bind "$_netif" "$_macaddr"; then
# only print out DEVICE, if it's user assigned
is_kernel_ethernet_name "$_netif" && return 0
fi
echo "DEVICE=\"$_netif\""
}
for netup in /tmp/net.*.did-setup ; do
[ -f $netup ] || continue
netif=${netup%%.did-setup}
netif=${netif##*/net.}
strglobin "$netif" ":*:*:*:*:" && continue
[ -e /tmp/ifcfg/ifcfg-$netif ] && continue
unset bridge
unset bond
unset bondslaves
unset bondname
unset bondoptions
unset bridgename
unset bridgeslaves
unset team
unset uuid
unset ip
unset gw
unset mtu
unset mask
unset macaddr
unset slave
unset ethname
unset vlan
unset vlanname
unset phydevice
[ -e /tmp/bond.${netif}.info ] && . /tmp/bond.${netif}.info
[ -e /tmp/bridge.${netif}.info ] && . /tmp/bridge.${netif}.info
[ -e /tmp/team.${netif}.info ] && . /tmp/team.${netif}.info
uuid=$(cat /proc/sys/kernel/random/uuid)
if [ "$netif" = "$bridgename" ]; then
bridge=yes
elif [ "$netif" = "$teammaster" ]; then
team=yes
elif [ "$netif" = "$bondname" ]; then
# $netif can't be bridge and bond at the same time
bond=yes
fi
for i in /tmp/vlan.${netif}.*; do
[ ! -e "$i" ] && continue
. "$i"
vlan=yes
break
done
# skip team interfaces for now, the host config must be in sync
[ "$netif" = "$teammaster" ] && continue
{
echo "# Generated by dracut initrd"
echo "NAME=\"$netif\""
[ -z "$vlan" ] && interface_bind "$netif" "$macaddr"
echo "ONBOOT=yes"
echo "NETBOOT=yes"
echo "UUID=\"$uuid\""
strstr "$(ip -6 addr show dev $netif)" 'inet6' && echo "IPV6INIT=yes"
if [ -f /tmp/dhclient.$netif.lease ]; then
[ -f /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
if [ -f /tmp/net.$netif.has_ibft_config ]; then
echo "BOOTPROTO=ibft"
else
echo "BOOTPROTO=dhcp"
fi
cp /tmp/dhclient.$netif.lease /tmp/ifcfg-leases/dhclient-$uuid-$netif.lease
else
# If we've booted with static ip= lines, the override file is there
[ -e /tmp/net.$netif.override ] && . /tmp/net.$netif.override
if strglobin "$ip" '*:*:*'; then
echo "IPV6INIT=yes"
echo "IPV6_AUTOCONF=no"
echo "IPV6ADDR=\"$ip/$mask\""
else
if [ -f /tmp/net.$netif.has_ibft_config ]; then
echo "BOOTPROTO=ibft"
else
echo "BOOTPROTO=none"
echo "IPADDR=\"$ip\""
if strstr "$mask" "."; then
echo "NETMASK=\"$mask\""
else
echo "PREFIX=\"$mask\""
fi
fi
fi
if strglobin "$gw" '*:*:*'; then
echo "IPV6_DEFAULTGW=\"$gw\""
elif [ -n "$gw" ]; then
echo "GATEWAY=\"$gw\""
fi
fi
[ -n "$mtu" ] && echo "MTU=\"$mtu\""
} > /tmp/ifcfg/ifcfg-$netif
# bridge needs different things written to ifcfg
if [ -z "$bridge" ] && [ -z "$bond" ] && [ -z "$vlan" ] && [ -z "$team" ]; then
# standard interface
echo "TYPE=Ethernet" >> /tmp/ifcfg/ifcfg-$netif
fi
if [ -n "$vlan" ] ; then
{
echo "TYPE=Vlan"
echo "DEVICE=\"$netif\""
echo "VLAN=yes"
echo "PHYSDEV=\"$phydevice\""
} >> /tmp/ifcfg/ifcfg-$netif
fi
if [ -n "$bond" ] ; then
# bond interface
{
# This variable is an indicator of a bond interface for initscripts
echo "BONDING_OPTS=\"$bondoptions\""
echo "NAME=\"$netif\""
echo "TYPE=Bond"
} >> /tmp/ifcfg/ifcfg-$netif
for slave in $bondslaves ; do
# write separate ifcfg file for the raw eth interface
(
echo "# Generated by dracut initrd"
echo "NAME=\"$slave\""
echo "TYPE=Ethernet"
echo "ONBOOT=yes"
echo "NETBOOT=yes"
echo "SLAVE=yes"
echo "MASTER=\"$netif\""
echo "UUID=\"$(cat /proc/sys/kernel/random/uuid)\""
unset macaddr
[ -e /tmp/net.$slave.override ] && . /tmp/net.$slave.override
interface_bind "$slave" "$macaddr"
) >> /tmp/ifcfg/ifcfg-$slave
done
fi
if [ -n "$bridge" ] ; then
# bridge
{
echo "TYPE=Bridge"
echo "NAME=\"$netif\""
} >> /tmp/ifcfg/ifcfg-$netif
for slave in $bridgeslaves ; do
# write separate ifcfg file for the raw eth interface
(
echo "# Generated by dracut initrd"
echo "NAME=\"$slave\""
echo "TYPE=Ethernet"
echo "ONBOOT=yes"
echo "NETBOOT=yes"
echo "BRIDGE=\"$bridgename\""
echo "UUID=\"$(cat /proc/sys/kernel/random/uuid)\""
unset macaddr
[ -e /tmp/net.$slave.override ] && . /tmp/net.$slave.override
interface_bind "$slave" "$macaddr"
) >> /tmp/ifcfg/ifcfg-$slave
done
fi
i=1
for ns in $(getargs nameserver) $dns1 $dns2; do
echo "DNS${i}=\"${ns}\"" >> /tmp/ifcfg/ifcfg-$netif
i=$((i+1))
done
[ -f /tmp/net.route6."$netif" ] && cp /tmp/net.route6."$netif" /tmp/ifcfg/route6-"$netif"
[ -f /tmp/net.route."$netif" ] && cp /tmp/net.route."$netif" /tmp/ifcfg/route-"$netif"
done
# Pass network opts
mkdir -m 0755 -p /run/initramfs/state/etc/sysconfig/network-scripts
mkdir -m 0755 -p /run/initramfs/state/var/lib/dhclient
echo "files /etc/sysconfig/network-scripts" >> /run/initramfs/rwtab
echo "files /var/lib/dhclient" >> /run/initramfs/rwtab
{
cp /tmp/net.* /run/initramfs/
for i in /tmp/net.*.resolv.conf; do
[ -f "$i" ] && cat "$i"
done | sort -u > /run/initramfs/state/etc/resolv.conf
[ -s /run/initramfs/state/etc/resolv.conf ] || rm -f /run/initramfs/state/etc/resolv.conf
copytree /tmp/ifcfg /run/initramfs/state/etc/sysconfig/network-scripts
cp /tmp/ifcfg-leases/* /run/initramfs/state/var/lib/dhclient
} > /dev/null 2>&1
PK �5�Zl!0 98ecryptfs/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
echo masterkey
return 0
}
# called by dracut
installkernel() {
instmods ecryptfs
}
# called by dracut
install() {
inst_hook pre-pivot 63 "$moddir/ecryptfs-mount.sh"
}
PK �5�Z#��Q' ' 98ecryptfs/READMEnu �[��� # Directions for creating the encrypted key that will be used to mount an
# eCryptfs filesystem
# Create the eCryptfs key (encrypted key type)
#
# The encrypted key type supports two formats: the 'default' format allows
# to generate a random symmetric key of the length specified, the 'ecryptfs'
# format generates an authentication token for the eCryptfs filesystem,
# which contains a randomly generated key. Two requirements for the latter
# format is that the key description must contain exactly 16 hexadecimal
# characters and that the encrypted key length must be equal to 64.
$ keyctl add encrypted 1000100010001000 "new ecryptfs trusted:kmk-trusted 64" @u
782117972
# Save the encrypted key
$ su -c 'keyctl pipe `keyctl search @u encrypted 1000100010001000` > /etc/keys/ecryptfs-trusted.blob'
# The eCryptfs key path name can be set in one of the following ways (specified in
# the order in which the variable is overwritten):
1) use the default value:
--------------------------------------------------------------------------
ECRYPTFSKEY="/etc/keys/ecryptfs-trusted.blob"
--------------------------------------------------------------------------
2) create the configuration file '/etc/sysconfig/ecryptfs' and set the ECRYPTFSKEY
variable;
3) specify the eCryptfs key path name in the 'ecryptfskey=' parameter of the kernel command
line.
# The configuration file '/etc/sysconfig/ecryptfs' is also used to specify
# more options for mounting the eCryptfs filesystem:
ECRYPTFSSRCDIR: existent directory in the lower root filesystem;
ECRYPTFSDSTDIR: mount point directory for the eCryptfs filesystem (the directory must be
created in the root filesystem before rebooting the platform);
ECRYPTFS_EXTRA_MOUNT_OPTS: extra mount options for the eCryptfs filesystem (the 'ecryptfs_sig'
option is automatically added by the dracut script).
# Example of the configuration file:
----------- '/etc/sysconfig/ecryptfs' (with default values) -----------
ECRYPTFS_KEY="/etc/keys/ecryptfs-trusted.blob"
ECRYPTFSSRCDIR="/secret"
ECRYPTFSDSTDIR="${ECRYPTFSSRCDIR}"
ECRYPTFS_EXTRA_MOUNT_OPTS=""
-----------------------------------------------------------------------
# If the variable ECRYPTFSDSTDIR is not specified in the configuration file,
# its value will be equal to that of ECRYPTFSSRCDIR.
PK �5�Z�_���
�
98ecryptfs/ecryptfs-mount.shnu ȯ�� #!/bin/sh
# Licensed under the GPLv2
#
# Copyright (C) 2011 Politecnico di Torino, Italy
# TORSEC group -- http://security.polito.it
# Roberto Sassu <roberto.sassu@polito.it>
ECRYPTFSCONFIG="${NEWROOT}/etc/sysconfig/ecryptfs"
ECRYPTFSKEYTYPE="encrypted"
ECRYPTFSKEYDESC="1000100010001000"
ECRYPTFSKEYID=""
ECRYPTFSSRCDIR="/secret"
ECRYPTFS_EXTRA_MOUNT_OPTS=""
load_ecryptfs_key()
{
# override the eCryptfs key path name from the 'ecryptfskey=' parameter in the kernel
# command line
ECRYPTFSKEYARG=$(getarg ecryptfskey=)
[ $? -eq 0 ] && \
ECRYPTFSKEY=${ECRYPTFSKEYARG}
# set the default value
[ -z "${ECRYPTFSKEY}" ] && \
ECRYPTFSKEY="/etc/keys/ecryptfs-trusted.blob";
# set the eCryptfs key path name
ECRYPTFSKEYPATH="${NEWROOT}${ECRYPTFSKEY}"
# check for eCryptfs encrypted key's existence
if [ ! -f "${ECRYPTFSKEYPATH}" ]; then
if [ "${RD_DEBUG}" = "yes" ]; then
info "eCryptfs: key file not found: ${ECRYPTFSKEYPATH}"
fi
return 1
fi
# read the eCryptfs encrypted key blob
KEYBLOB=$(cat ${ECRYPTFSKEYPATH})
# load the eCryptfs encrypted key blob
ECRYPTFSKEYID=$(keyctl add ${ECRYPTFSKEYTYPE} ${ECRYPTFSKEYDESC} "load ${KEYBLOB}" @u)
[ $? -eq 0 ] || {
info "eCryptfs: failed to load the eCryptfs key: ${ECRYPTFSKEYDESC}";
return 1;
}
return 0
}
unload_ecryptfs_key()
{
# unlink the eCryptfs encrypted key
keyctl unlink ${ECRYPTFSKEYID} @u || {
info "eCryptfs: failed to unlink the eCryptfs key: ${ECRYPTFSKEYDESC}";
return 1;
}
return 0
}
mount_ecryptfs()
{
# read the configuration from the config file
[ -f "${ECRYPTFSCONFIG}" ] && \
. ${ECRYPTFSCONFIG}
# load the eCryptfs encrypted key
load_ecryptfs_key || return 1
# set the default value for ECRYPTFSDSTDIR
[ -z "${ECRYPTFSDSTDIR}" ] && \
ECRYPTFSDSTDIR=${ECRYPTFSSRCDIR}
# set the eCryptfs filesystem mount point
ECRYPTFSSRCMNT="${NEWROOT}${ECRYPTFSSRCDIR}"
ECRYPTFSDSTMNT="${NEWROOT}${ECRYPTFSDSTDIR}"
# build the mount options variable
ECRYPTFS_MOUNT_OPTS="ecryptfs_sig=${ECRYPTFSKEYDESC}"
[ ! -z "${ECRYPTFS_EXTRA_MOUNT_OPTS}" ] && \
ECRYPTFS_MOUNT_OPTS="${ECRYPTFS_MOUNT_OPTS},${ECRYPTFS_EXTRA_MOUNT_OPTS}"
# mount the eCryptfs filesystem
info "Mounting the configured eCryptfs filesystem"
mount -i -t ecryptfs -o${ECRYPTFS_MOUNT_OPTS} ${ECRYPTFSSRCMNT} ${ECRYPTFSDSTMNT} >/dev/null || {
info "eCryptfs: mount of the eCryptfs filesystem failed";
return 1;
}
# unload the eCryptfs encrypted key
unload_ecryptfs_key || return 1
return 0
}
mount_ecryptfs
PK �5�Z�i�� � 99base/initqueue.shnu ȯ�� #!/bin/sh
#
# Licensed under the GPLv2+
#
# Copyright 2008-2010, Red Hat, Inc.
# Harald Hoyer <harald@redhat.com>
PATH=/usr/sbin:/usr/bin:/sbin:/bin
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
while [ $# -gt 0 ]; do
case "$1" in
--onetime)
onetime="yes";;
--online)
qname="/online";;
--settled)
qname="/settled";;
--finished)
qname="/finished";;
--timeout)
qname="/timeout";;
--unique)
unique="yes";;
--name)
name="$2";shift;;
--env)
env="$2"; shift;;
*)
break;;
esac
shift
done
if [ -z "$unique" ]; then
job="${name}$$"
else
job="${name:-$1}"
job=${job##*/}
fi
exe=$1
shift
[ -x "$exe" ] || exe=$(command -v $exe)
if [ -z "$exe" ] ; then
echo "Invalid command"
exit 1
fi
{
[ -n "$onetime" ] && echo '[ -e "$job" ] && rm -f -- "$job"'
[ -n "$env" ] && echo "$env"
echo "$exe" "$@"
} > "/tmp/$$-${job}.sh"
mv -f "/tmp/$$-${job}.sh" "$hookdir/initqueue${qname}/${job}.sh"
[ -z "$qname" ] && >> $hookdir/initqueue/work
exit 0
PK �5�Z�T� � 99base/loginit.shnu ȯ�� #!/bin/sh
# turn off debugging
set +x
QUIET=$1
printf -- "$$" > /run/initramfs/loginit.pid
[ -e /dev/kmsg ] && exec 5>/dev/kmsg || exec 5>/dev/null
exec 6>/run/initramfs/init.log
while read line || [ -n "$line" ]; do
if [ "$line" = "DRACUT_LOG_END" ]; then
rm -f -- /run/initramfs/loginit.pipe
exit 0
fi
echo "<31>dracut: $line" >&5
# if "quiet" is specified we output to /dev/console
[ -n "$QUIET" ] || echo "dracut: $line"
echo "$line" >&6
done
PK �5�Zt g� 99base/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
return 0
}
# called by dracut
depends() {
echo udev-rules
return 0
}
# called by dracut
install() {
local _d
inst_multiple mount mknod mkdir sleep chroot chown \
sed ls flock cp mv dmesg rm ln rmmod mkfifo umount readlink setsid
inst $(command -v modprobe) /sbin/modprobe
inst_multiple -o findmnt less kmod
if [ ! -e "${initdir}/bin/sh" ]; then
inst_multiple bash
(ln -s bash "${initdir}/bin/sh" || :)
fi
#add common users in /etc/passwd, it will be used by nfs/ssh currently
grep '^root:' "$initdir/etc/passwd" 2>/dev/null || echo 'root:x:0:0::/root:/bin/sh' >> "$initdir/etc/passwd"
grep '^nobody:' /etc/passwd >> "$initdir/etc/passwd"
# install our scripts and hooks
inst_script "$moddir/init.sh" "/init"
inst_script "$moddir/initqueue.sh" "/sbin/initqueue"
inst_script "$moddir/loginit.sh" "/sbin/loginit"
inst_script "$moddir/rdsosreport.sh" "/sbin/rdsosreport"
[ -e "${initdir}/lib" ] || mkdir -m 0755 -p ${initdir}/lib
mkdir -m 0755 -p ${initdir}/lib/dracut
mkdir -m 0755 -p ${initdir}/lib/dracut/hooks
mkdir -p ${initdir}/tmp
inst_simple "$moddir/dracut-lib.sh" "/lib/dracut-lib.sh"
mkdir -p "${initdir}/var"
if ! dracut_module_included "systemd"; then
inst_multiple switch_root || dfatal "Failed to install switch_root"
inst_hook cmdline 10 "$moddir/parse-root-opts.sh"
inst_multiple -o $systemdutildir/systemd-timestamp
fi
if [[ $realinitpath ]]; then
for i in $realinitpath; do
echo "rd.distroinit=$i"
done > "${initdir}/etc/cmdline.d/distroinit.conf"
fi
ln -fs /proc/self/mounts "$initdir/etc/mtab"
if [[ $ro_mnt = yes ]]; then
echo ro >> "${initdir}/etc/cmdline.d/base.conf"
fi
local VERSION=""
local PRETTY_NAME=""
if [ -e /etc/os-release ]; then
. /etc/os-release
[[ -n ${VERSION} ]] && VERSION+=" "
[[ -n ${PRETTY_NAME} ]] && PRETTY_NAME+=" "
fi
NAME=dracut
ID=dracut
VERSION+="dracut-$DRACUT_VERSION"
PRETTY_NAME+="dracut-$DRACUT_VERSION (Initramfs)"
VERSION_ID=$DRACUT_VERSION
ANSI_COLOR="0;31"
[ -e "${initdir}/usr/lib" ] || mkdir -m 0755 -p ${initdir}/usr/lib
{
echo NAME=\"$NAME\"
echo VERSION=\"$VERSION\"
echo ID=$ID
echo VERSION_ID=$VERSION_ID
echo PRETTY_NAME=\"$PRETTY_NAME\"
echo ANSI_COLOR=\"$ANSI_COLOR\"
} > $initdir/usr/lib/initrd-release
echo dracut-$DRACUT_VERSION > $initdir/lib/dracut/dracut-$DRACUT_VERSION
ln -sf ../usr/lib/initrd-release $initdir/etc/initrd-release
ln -sf initrd-release $initdir/usr/lib/os-release
ln -sf initrd-release $initdir/etc/os-release
## save host_devs which we need bring up
if [[ $hostonly_cmdline == "yes" ]]; then
if [[ -n "${host_devs[@]}" ]]; then
dracut_need_initqueue
fi
if [[ -f "$initdir/lib/dracut/need-initqueue" ]] || ! dracut_module_included "systemd"; then
(
if dracut_module_included "systemd"; then
DRACUT_SYSTEMD=1
fi
PREFIX="$initdir"
. "$moddir/dracut-lib.sh"
for _dev in "${host_devs[@]}"; do
for _dev2 in "${root_devs[@]}"; do
[[ "$_dev" == "$_dev2" ]] && continue 2
done
# We only actually wait for real devs - swap is only needed
# for resume and udev rules generated when parsing resume=
# argument take care of the waiting for us
for _dev2 in "${swap_devs[@]}"; do
[[ "$_dev" == "$_dev2" ]] && continue 2
done
_pdev=$(get_persistent_dev $_dev)
case "$_pdev" in
/dev/?*) wait_for_dev $_pdev;;
*) ;;
esac
done
)
fi
fi
}
PK �5�Z��@�. . 99base/init.shnu ȯ�� #!/bin/sh
#
# Licensed under the GPLv2
#
# Copyright 2008-2010, Red Hat, Inc.
# Harald Hoyer <harald@redhat.com>
# Jeremy Katz <katzj@redhat.com>
export -p > /tmp/export.orig
NEWROOT="/sysroot"
[ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT
OLDPATH=$PATH
PATH=/usr/sbin:/usr/bin:/sbin:/bin
export PATH
# mount some important things
[ ! -d /proc/self ] && \
mount -t proc -o nosuid,noexec,nodev proc /proc >/dev/null
if [ "$?" != "0" ]; then
echo "Cannot mount proc on /proc! Compile the kernel with CONFIG_PROC_FS!"
exit 1
fi
[ ! -d /sys/kernel ] && \
mount -t sysfs -o nosuid,noexec,nodev sysfs /sys >/dev/null
if [ "$?" != "0" ]; then
echo "Cannot mount sysfs on /sys! Compile the kernel with CONFIG_SYSFS!"
exit 1
fi
RD_DEBUG=""
. /lib/dracut-lib.sh
setdebug
if ! ismounted /dev; then
mount -t devtmpfs -o mode=0755,noexec,nosuid,strictatime devtmpfs /dev >/dev/null
fi
if ! ismounted /dev; then
echo "Cannot mount devtmpfs on /dev! Compile the kernel with CONFIG_DEVTMPFS!"
exit 1
fi
# prepare the /dev directory
[ ! -h /dev/fd ] && ln -s /proc/self/fd /dev/fd >/dev/null 2>&1
[ ! -h /dev/stdin ] && ln -s /proc/self/fd/0 /dev/stdin >/dev/null 2>&1
[ ! -h /dev/stdout ] && ln -s /proc/self/fd/1 /dev/stdout >/dev/null 2>&1
[ ! -h /dev/stderr ] && ln -s /proc/self/fd/2 /dev/stderr >/dev/null 2>&1
if ! ismounted /dev/pts; then
mkdir -m 0755 /dev/pts
mount -t devpts -o gid=5,mode=620,noexec,nosuid devpts /dev/pts >/dev/null
fi
if ! ismounted /dev/shm; then
mkdir -m 0755 /dev/shm
mount -t tmpfs -o mode=1777,noexec,nosuid,nodev,strictatime tmpfs /dev/shm >/dev/null
fi
if ! ismounted /run; then
mkdir -m 0755 /newrun
if ! str_starts "$(readlink -f /bin/sh)" "/run/"; then
mount -t tmpfs -o mode=0755,noexec,nosuid,nodev,strictatime tmpfs /newrun >/dev/null
else
# the initramfs binaries are located in /run, so don't mount it with noexec
mount -t tmpfs -o mode=0755,nosuid,nodev,strictatime tmpfs /newrun >/dev/null
fi
cp -a /run/* /newrun >/dev/null 2>&1
mount --move /newrun /run
rm -fr -- /newrun
fi
if command -v kmod >/dev/null 2>/dev/null; then
kmod static-nodes --format=tmpfiles 2>/dev/null | \
while read type file mode a a a majmin || [ -n "$type" ]; do
type=${type%\!}
case $type in
d)
mkdir -m $mode -p $file
;;
c)
mknod -m $mode $file $type ${majmin%:*} ${majmin#*:}
;;
esac
done
fi
trap "emergency_shell Signal caught!" 0
export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })
if [ $UDEVVERSION -gt 166 ]; then
# newer versions of udev use /run/udev/rules.d
export UDEVRULESD=/run/udev/rules.d
[ -d /run/udev ] || mkdir -p -m 0755 /run/udev
[ -d $UDEVRULESD ] || mkdir -p -m 0755 $UDEVRULESD
else
mkdir -m 0755 /dev/.udev /dev/.udev/rules.d
export UDEVRULESD=/dev/.udev/rules.d
fi
if [ "$RD_DEBUG" = "yes" ]; then
mkfifo /run/initramfs/loginit.pipe
loginit $DRACUT_QUIET </run/initramfs/loginit.pipe >/dev/console 2>&1 &
exec >/run/initramfs/loginit.pipe 2>&1
else
exec 0<>/dev/console 1<>/dev/console 2<>/dev/console
fi
[ -f /usr/lib/initrd-release ] && . /usr/lib/initrd-release
[ -n "$VERSION_ID" ] && info "$NAME-$VERSION_ID"
source_conf /etc/conf.d
if getarg "rd.cmdline=ask"; then
echo "Enter additional kernel command line parameter (end with ctrl-d or .)"
while read -p "> " line || [ -n "$line" ]; do
[ "$line" = "." ] && break
echo "$line" >> /etc/cmdline.d/99-cmdline-ask.conf
done
fi
if ! getargbool 1 'rd.hostonly'; then
[ -f /etc/cmdline.d/99-cmdline-ask.conf ] && mv /etc/cmdline.d/99-cmdline-ask.conf /tmp/99-cmdline-ask.conf
remove_hostonly_files
[ -f /tmp/99-cmdline-ask.conf ] && mv /tmp/99-cmdline-ask.conf /etc/cmdline.d/99-cmdline-ask.conf
fi
# run scriptlets to parse the command line
make_trace_mem "hook cmdline" '1+:mem' '1+:iomem' '3+:slab'
getarg 'rd.break=cmdline' -d 'rdbreak=cmdline' && emergency_shell -n cmdline "Break before cmdline"
source_hook cmdline
[ -z "$root" ] && die "No or empty root= argument"
[ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"
export root rflags fstype netroot NEWROOT
# pre-udev scripts run before udev starts, and are run only once.
make_trace_mem "hook pre-udev" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-udev' -d 'rdbreak=pre-udev' && emergency_shell -n pre-udev "Break before pre-udev"
source_hook pre-udev
UDEV_LOG=err
getargbool 0 rd.udev.info -d -y rdudevinfo && UDEV_LOG=info
getargbool 0 rd.udev.debug -d -y rdudevdebug && UDEV_LOG=debug
# start up udev and trigger cold plugs
UDEV_LOG=$UDEV_LOG $systemdutildir/systemd-udevd --daemon --resolve-names=never
UDEV_QUEUE_EMPTY="udevadm settle --timeout=0"
if [ $UDEVVERSION -lt 140 ]; then
UDEV_QUEUE_EMPTY="udevadm settle --timeout=1"
fi
udevproperty "hookdir=$hookdir"
make_trace_mem "hook pre-trigger" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-trigger' -d 'rdbreak=pre-trigger' && emergency_shell -n pre-trigger "Break before pre-trigger"
source_hook pre-trigger
udevadm control --reload >/dev/null 2>&1 || :
# then the rest
udevadm trigger --type=subsystems --action=add >/dev/null 2>&1
udevadm trigger --type=devices --action=add >/dev/null 2>&1
make_trace_mem "hook initqueue" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=initqueue' -d 'rdbreak=initqueue' && emergency_shell -n initqueue "Break before initqueue"
RDRETRY=$(getarg rd.retry -d 'rd_retry=')
RDRETRY=${RDRETRY:-180}
RDRETRY=$(($RDRETRY*2))
export RDRETRY
main_loop=0
export main_loop
while :; do
check_finished && break
udevsettle
check_finished && break
if [ -f $hookdir/initqueue/work ]; then
rm -f -- $hookdir/initqueue/work
fi
for job in $hookdir/initqueue/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
$UDEV_QUEUE_EMPTY >/dev/null 2>&1 || continue
for job in $hookdir/initqueue/settled/*.sh; do
[ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
$UDEV_QUEUE_EMPTY >/dev/null 2>&1 || continue
# no more udev jobs and queues empty.
sleep 0.5
if [ $main_loop -gt $((2*$RDRETRY/3)) ]; then
for job in $hookdir/initqueue/timeout/*.sh; do
[ -e "$job" ] || break
job=$job . $job
udevadm settle --timeout=0 >/dev/null 2>&1 || main_loop=0
[ -f $hookdir/initqueue/work ] && main_loop=0
done
fi
main_loop=$(($main_loop+1))
[ $main_loop -gt $RDRETRY ] \
&& { flock -s 9 ; emergency_shell "Could not boot."; } 9>/.console_lock
done
unset job
unset queuetriggered
unset main_loop
unset RDRETRY
# pre-mount happens before we try to mount the root filesystem,
# and happens once.
make_trace_mem "hook pre-mount" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-mount' -d 'rdbreak=pre-mount' && emergency_shell -n pre-mount "Break pre-mount"
source_hook pre-mount
getarg 'rd.break=mount' -d 'rdbreak=mount' && emergency_shell -n mount "Break mount"
# mount scripts actually try to mount the root filesystem, and may
# be sourced any number of times. As soon as one suceeds, no more are sourced.
_i_mount=0
while :; do
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
umount "$NEWROOT"
fi
for f in $hookdir/mount/*.sh; do
[ -f "$f" ] && . "$f"
if ismounted "$NEWROOT"; then
usable_root "$NEWROOT" && break;
warn "$NEWROOT has no proper rootfs layout, ignoring and removing offending mount hook"
umount "$NEWROOT"
rm -f -- "$f"
fi
done
_i_mount=$(($_i_mount+1))
[ $_i_mount -gt 20 ] \
&& { flock -s 9 ; emergency_shell "Can't mount root filesystem"; } 9>/.console_lock
done
{
printf "Mounted root filesystem "
while read dev mp rest || [ -n "$dev" ]; do [ "$mp" = "$NEWROOT" ] && echo $dev; done < /proc/mounts
} | vinfo
# pre pivot scripts are sourced just before we doing cleanup and switch over
# to the new root.
make_trace_mem "hook pre-pivot" '1:shortmem' '2+:mem' '3+:slab'
getarg 'rd.break=pre-pivot' -d 'rdbreak=pre-pivot' && emergency_shell -n pre-pivot "Break pre-pivot"
source_hook pre-pivot
make_trace_mem "hook cleanup" '1:shortmem' '2+:mem' '3+:slab'
# pre pivot cleanup scripts are sourced just before we switch over to the new root.
getarg 'rd.break=cleanup' -d 'rdbreak=cleanup' && emergency_shell -n cleanup "Break cleanup"
source_hook cleanup
# By the time we get here, the root filesystem should be mounted.
# Try to find init.
for i in "$(getarg real_init=)" "$(getarg init=)" $(getargs rd.distroinit=) /sbin/init; do
[ -n "$i" ] || continue
__p=$(readlink -f "${NEWROOT}/${i}")
if [ -x "$__p" -o -x "${NEWROOT}/${__p}" ]; then
INIT="$i"
break
fi
done
[ "$INIT" ] || {
echo "Cannot find init!"
echo "Please check to make sure you passed a valid root filesystem!"
emergency_shell
}
if [ $UDEVVERSION -lt 168 ]; then
# stop udev queue before killing it
udevadm control --stop-exec-queue
HARD=""
while pidof udevd >/dev/null 2>&1; do
for pid in $(pidof udevd); do
kill $HARD $pid >/dev/null 2>&1
done
HARD="-9"
done
else
udevadm control --exit
udevadm info --cleanup-db
fi
debug_off # Turn off debugging for this section
# unexport some vars
export_n root rflags fstype netroot NEWROOT
export RD_TIMESTAMP
# Clean up the environment
for i in $(export -p); do
i=${i#declare -x}
i=${i#export}
strstr "$i" "=" || continue
i=${i%%=*}
[ -z "$i" ] && continue
case $i in
root|PATH|HOME|TERM|PS4|RD_*)
:;;
*)
unset "$i";;
esac
done
. /tmp/export.orig 2>/dev/null || :
rm -f -- /tmp/export.orig
initargs=""
read CLINE </proc/cmdline
if getarg init= >/dev/null ; then
ignoreargs="console BOOT_IMAGE"
# only pass arguments after init= to the init
CLINE=${CLINE#*init=}
set -- $CLINE
shift # clear out the rest of the "init=" arg
for x in "$@"; do
for s in $ignoreargs; do
[ "${x%%=*}" = $s ] && continue 2
done
initargs="$initargs $x"
done
unset CLINE
else
debug_off # Turn off debugging for this section
set -- $CLINE
for x in "$@"; do
case "$x" in
[0-9]|s|S|single|emergency|auto ) \
initargs="$initargs $x"
;;
esac
done
fi
debug_on
if ! [ -d "$NEWROOT"/run ]; then
NEWRUN=/dev/.initramfs
mkdir -m 0755 "$NEWRUN"
mount --rbind /run/initramfs "$NEWRUN"
fi
wait_for_loginit
# remove helper symlink
[ -h /dev/root ] && rm -f -- /dev/root
bv=$(getarg rd.break -d rdbreak) && [ -z "$bv" ] &&
emergency_shell -n switch_root "Break before switch_root"
unset bv
info "Switching root"
unset PS4
CAPSH=$(command -v capsh)
SWITCH_ROOT=$(command -v switch_root)
PATH=$OLDPATH
export PATH
if [ -f /etc/capsdrop ]; then
. /etc/capsdrop
info "Calling $INIT with capabilities $CAPS_INIT_DROP dropped."
unset RD_DEBUG
exec $CAPSH --drop="$CAPS_INIT_DROP" -- \
-c "exec switch_root \"$NEWROOT\" \"$INIT\" $initargs" || \
{
warn "Command:"
warn capsh --drop=$CAPS_INIT_DROP -- -c exec switch_root "$NEWROOT" "$INIT" $initargs
warn "failed."
emergency_shell
}
else
unset RD_DEBUG
exec $SWITCH_ROOT "$NEWROOT" "$INIT" $initargs || {
warn "Something went very badly wrong in the initramfs. Please "
warn "file a bug against dracut."
emergency_shell
}
fi
PK �5�Z�8�P 99base/dracut-lib.shnu ȯ�� #!/bin/sh
export DRACUT_SYSTEMD
export NEWROOT
if [ -n "$NEWROOT" ]; then
[ -d $NEWROOT ] || mkdir -p -m 0755 $NEWROOT
fi
if ! [ -d /run/initramfs ]; then
mkdir -p -m 0755 /run/initramfs/log
ln -sfn /run/initramfs/log /var/log
fi
[ -d /run/lock ] || mkdir -p -m 0755 /run/lock
[ -d /run/log ] || mkdir -p -m 0755 /run/log
debug_off() {
set +x
}
debug_on() {
[ "$RD_DEBUG" = "yes" ] && set -x
}
# returns OK if $1 contains literal string $2 (and isn't empty)
strstr() {
[ "${1##*"$2"*}" != "$1" ]
}
# returns OK if $1 matches (completely) glob pattern $2
# An empty $1 will not be considered matched, even if $2 is * which technically
# matches; as it would match anything, it's not an interesting case.
strglob() {
[ -n "$1" -a -z "${1##$2}" ]
}
# returns OK if $1 contains (anywhere) a match of glob pattern $2
# An empty $1 will not be considered matched, even if $2 is * which technically
# matches; as it would match anything, it's not an interesting case.
strglobin() {
[ -n "$1" -a -z "${1##*$2*}" ]
}
# returns OK if $1 contains literal string $2 at the beginning, and isn't empty
str_starts() {
[ "${1#"$2"*}" != "$1" ]
}
# returns OK if $1 contains literal string $2 at the end, and isn't empty
str_ends() {
[ "${1%*"$2"}" != "$1" ]
}
trim() {
local var="$*"
var="${var#"${var%%[![:space:]]*}"}" # remove leading whitespace characters
var="${var%"${var##*[![:space:]]}"}" # remove trailing whitespace characters
printf "%s" "$var"
}
if [ -z "$DRACUT_SYSTEMD" ]; then
warn() {
check_quiet
echo "<28>dracut Warning: $*" > /dev/kmsg
echo "dracut Warning: $*" >&2
}
info() {
check_quiet
echo "<30>dracut: $*" > /dev/kmsg
[ "$DRACUT_QUIET" != "yes" ] && \
echo "dracut: $*" >&2
}
else
warn() {
echo "Warning: $*" >&2
}
info() {
echo "$*"
}
fi
vwarn() {
while read line || [ -n "$line" ]; do
warn $line;
done
}
vinfo() {
while read line || [ -n "$line" ]; do
info $line;
done
}
# replaces all occurrences of 'search' in 'str' with 'replacement'
#
# str_replace str search replacement
#
# example:
# str_replace ' one two three ' ' ' '_'
str_replace() {
local in="$1"; local s="$2"; local r="$3"
local out=''
while strstr "${in}" "$s"; do
chop="${in%%"$s"*}"
out="${out}${chop}$r"
in="${in#*"$s"}"
done
echo "${out}${in}"
}
killall_proc_mountpoint() {
local _pid
local _t
local _killed=0
for _pid in /proc/*; do
_pid=${_pid##/proc/}
case $_pid in
*[!0-9]*) continue;;
esac
[ -e "/proc/$_pid/exe" ] || continue
[ -e "/proc/$_pid/root" ] || continue
if strstr "$(ls -l -- "/proc/$_pid" "/proc/$_pid/fd" 2>/dev/null)" "$1" ; then
kill -9 "$_pid"
_killed=1
fi
done
return $_killed
}
getcmdline() {
local _line
local _i
local CMDLINE_ETC_D
local CMDLINE_ETC
local CMDLINE_PROC
unset _line
if [ -e /etc/cmdline ]; then
while read -r _line || [ -n "$_line" ]; do
CMDLINE_ETC="$CMDLINE_ETC $_line";
done </etc/cmdline;
fi
for _i in /etc/cmdline.d/*.conf; do
[ -e "$_i" ] || continue
while read -r _line || [ -n "$_line" ]; do
CMDLINE_ETC_D="$CMDLINE_ETC_D $_line";
done <"$_i";
done
if [ -e /proc/cmdline ]; then
while read -r _line || [ -n "$_line" ]; do
CMDLINE_PROC="$CMDLINE_PROC $_line"
done </proc/cmdline;
fi
CMDLINE="$CMDLINE_ETC_D $CMDLINE_ETC $CMDLINE_PROC"
printf "%s" "$CMDLINE"
}
_dogetarg() {
local _o _val _doecho
unset _val
unset _o
unset _doecho
CMDLINE=$(getcmdline)
for _o in $CMDLINE; do
if [ "${_o%%=*}" = "${1%%=*}" ]; then
if [ -n "${1#*=}" -a "${1#*=*}" != "${1}" ]; then
# if $1 has a "=<value>", we want the exact match
if [ "$_o" = "$1" ]; then
_val="1";
unset _doecho
fi
continue
fi
if [ "${_o#*=}" = "$_o" ]; then
# if cmdline argument has no "=<value>", we assume "=1"
_val="1";
unset _doecho
continue
fi
_val="${_o#*=}"
_doecho=1
fi
done
if [ -n "$_val" ]; then
[ "x$_doecho" != "x" ] && echo "$_val";
return 0;
fi
return 1;
}
getarg() {
debug_off
local _deprecated _newoption
while [ $# -gt 0 ]; do
case $1 in
-d) _deprecated=1; shift;;
-y) if _dogetarg $2 >/dev/null; then
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Kernel command line option '$2' is deprecated, use '$_newoption' instead." || warn "Option '$2' is deprecated."
fi
echo 1
debug_on
return 0
fi
_deprecated=0
shift 2;;
-n) if _dogetarg $2 >/dev/null; then
echo 0;
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Kernel command line option '$2' is deprecated, use '$_newoption=0' instead." || warn "Option '$2' is deprecated."
fi
debug_on
return 1
fi
_deprecated=0
shift 2;;
*) if [ -z "$_newoption" ]; then
_newoption="$1"
fi
if _dogetarg $1; then
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Kernel command line option '$1' is deprecated, use '$_newoption' instead." || warn "Option '$1' is deprecated."
fi
debug_on
return 0;
fi
_deprecated=0
shift;;
esac
done
debug_on
return 1
}
# getargbool <defaultval> <args...>
# False if "getarg <args...>" returns "0", "no", or "off".
# True if getarg returns any other non-empty string.
# If not found, assumes <defaultval> - usually 0 for false, 1 for true.
# example: getargbool 0 rd.info
# true: rd.info, rd.info=1, rd.info=xxx
# false: rd.info=0, rd.info=off, rd.info not present (default val is 0)
getargbool() {
local _b
unset _b
local _default
_default="$1"; shift
_b=$(getarg "$@")
[ $? -ne 0 -a -z "$_b" ] && _b="$_default"
if [ -n "$_b" ]; then
[ $_b = "0" ] && return 1
[ $_b = "no" ] && return 1
[ $_b = "off" ] && return 1
fi
return 0
}
isdigit() {
case "$1" in
*[!0-9]*|"") return 1;;
esac
return 0
}
# getargnum <defaultval> <minval> <maxval> <arg>
# Will echo the arg if it's in range [minval - maxval].
# If it's not set or it's not valid, will set it <defaultval>.
# Note all values are required to be >= 0 here.
# <defaultval> should be with [minval -maxval].
getargnum() {
local _b
unset _b
local _default _min _max
_default="$1"; shift
_min="$1"; shift
_max="$1"; shift
_b=$(getarg "$1")
[ $? -ne 0 -a -z "$_b" ] && _b=$_default
if [ -n "$_b" ]; then
isdigit "$_b" && _b=$(($_b)) && \
[ $_b -ge $_min ] && [ $_b -le $_max ] && echo $_b && return
fi
echo $_default
}
_dogetargs() {
debug_off
local _o _found _key
unset _o
unset _found
CMDLINE=$(getcmdline)
_key="$1"
set --
for _o in $CMDLINE; do
if [ "$_o" = "$_key" ]; then
_found=1;
elif [ "${_o%%=*}" = "${_key%=}" ]; then
[ -n "${_o%%=*}" ] && set -- "$@" "${_o#*=}";
_found=1;
fi
done
if [ -n "$_found" ]; then
[ $# -gt 0 ] && printf '%s' "$*"
return 0
fi
return 1;
}
getargs() {
debug_off
local _val _i _args _gfound _deprecated
unset _val
unset _gfound
_newoption="$1"
_args="$@"
set --
for _i in $_args; do
if [ "$_i" = "-d" ]; then
_deprecated=1
continue
fi
_val="$(_dogetargs $_i)"
if [ $? -eq 0 ]; then
if [ "$_deprecated" = "1" ]; then
[ -n "$_newoption" ] && warn "Option '$_i' is deprecated, use '$_newoption' instead." || warn "Option $_i is deprecated!"
fi
_gfound=1
fi
[ -n "$_val" ] && set -- "$@" "$_val"
_deprecated=0
done
if [ -n "$_gfound" ]; then
if [ $# -gt 0 ]; then
printf '%s' "$*"
fi
debug_on
return 0
fi
debug_on
return 1;
}
# Prints value of given option. If option is a flag and it's present,
# it just returns 0. Otherwise 1 is returned.
# $1 = options separated by commas
# $2 = option we are interested in
#
# Example:
# $1 = cipher=aes-cbc-essiv:sha256,hash=sha256,verify
# $2 = hash
# Output:
# sha256
getoptcomma() {
local line=",$1,"; local opt="$2"; local tmp
case "${line}" in
*,${opt}=*,*)
tmp="${line#*,${opt}=}"
echo "${tmp%%,*}"
return 0
;;
*,${opt},*) return 0;;
esac
return 1
}
# Splits given string 'str' with separator 'sep' into variables 'var1', 'var2',
# 'varN'. If number of fields is less than number of variables, remaining are
# not set. If number of fields is greater than number of variables, the last
# variable takes remaining fields. In short - it acts similary to 'read'.
#
# splitsep sep str var1 var2 varN
#
# example:
# splitsep ':' 'foo:bar:baz' v1 v2
# in result:
# v1='foo', v2='bar:baz'
#
# TODO: ':' inside fields.
splitsep() {
debug_off
local sep="$1"; local str="$2"; shift 2
local tmp
while [ -n "$str" -a "$#" -gt 1 ]; do
tmp="${str%%$sep*}"
eval "$1='${tmp}'"
str="${str#"$tmp"}"
str="${str#$sep}"
shift
done
[ -n "$str" -a -n "$1" ] && eval "$1='$str'"
debug_on
return 0
}
setdebug() {
[ -f /usr/lib/initrd-release ] || return
if [ -z "$RD_DEBUG" ]; then
if [ -e /proc/cmdline ]; then
RD_DEBUG=no
if getargbool 0 rd.debug -d -y rdinitdebug -d -y rdnetdebug; then
RD_DEBUG=yes
[ -n "$BASH" ] && \
export PS4='${BASH_SOURCE}@${LINENO}(${FUNCNAME[0]}): ';
fi
fi
export RD_DEBUG
fi
debug_on
}
setdebug
source_all() {
local f
local _dir
_dir=$1; shift
[ "$_dir" ] && [ -d "/$_dir" ] || return
for f in "/$_dir"/*.sh; do [ -e "$f" ] && . "$f" "$@"; done
}
hookdir=/lib/dracut/hooks
export hookdir
source_hook() {
local _dir
_dir=$1; shift
source_all "/lib/dracut/hooks/$_dir" "$@"
}
check_finished() {
local f
for f in $hookdir/initqueue/finished/*.sh; do
[ "$f" = "$hookdir/initqueue/finished/*.sh" ] && return 0
{ [ -e "$f" ] && ( . "$f" ) ; } || return 1
done
return 0
}
source_conf() {
local f
[ "$1" ] && [ -d "/$1" ] || return
for f in "/$1"/*.conf; do [ -e "$f" ] && . "$f"; done
}
die() {
{
echo "<24>dracut: FATAL: $*";
echo "<24>dracut: Refusing to continue";
} > /dev/kmsg
{
echo "warn dracut: FATAL: \"$*\"";
echo "warn dracut: Refusing to continue";
} >> $hookdir/emergency/01-die.sh
[ -d /run/initramfs ] || mkdir -p -- /run/initramfs
> /run/initramfs/.die
if getargbool 0 "rd.shell"; then
emergency_shell
else
source_hook "shutdown-emergency"
fi
if [ -n "$DRACUT_SYSTEMD" ]; then
systemctl --no-block --force halt
fi
exit 1
}
check_quiet() {
if [ -z "$DRACUT_QUIET" ]; then
DRACUT_QUIET="yes"
getargbool 0 rd.info -d -y rdinfo && DRACUT_QUIET="no"
getargbool 0 rd.debug -d -y rdinitdebug && DRACUT_QUIET="no"
getarg quiet || DRACUT_QUIET="yes"
a=$(getarg loglevel=)
[ -n "$a" ] && [ $a -ge 28 ] && DRACUT_QUIET="yes"
export DRACUT_QUIET
fi
}
check_occurances() {
# Count the number of times the character $ch occurs in $str
# Return 0 if the count matches the expected number, 1 otherwise
local str="$1"
local ch="$2"
local expected="$3"
local count=0
while [ "${str#*$ch}" != "${str}" ]; do
str="${str#*$ch}"
count=$(( $count + 1 ))
done
[ $count -eq $expected ]
}
incol2() {
debug_off
local dummy check;
local file="$1";
local str="$2";
[ -z "$file" ] && return 1;
[ -z "$str" ] && return 1;
while read dummy check restofline || [ -n "$check" ]; do
if [ "$check" = "$str" ]; then
debug_on
return 0
fi
done < $file
debug_on
return 1
}
udevsettle() {
[ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })
if [ $UDEVVERSION -ge 143 ]; then
udevadm settle --exit-if-exists=$hookdir/initqueue/work $settle_exit_if_exists
else
udevadm settle --timeout=30
fi
}
udevproperty() {
[ -z "$UDEVVERSION" ] && export UDEVVERSION=$(udevadm --version | { read v _ ; echo $v ; })
if [ $UDEVVERSION -ge 143 ]; then
for i in "$@"; do udevadm control --property=$i; done
else
for i in "$@"; do udevadm control --env=$i; done
fi
}
find_mount() {
local dev mnt etc wanted_dev
wanted_dev="$(readlink -e -q $1)"
while read dev mnt etc || [ -n "$dev" ]; do
[ "$dev" = "$wanted_dev" ] && echo "$dev" && return 0
done < /proc/mounts
return 1
}
# usage: ismounted <mountpoint>
# usage: ismounted /dev/<device>
if command -v findmnt >/dev/null; then
ismounted() {
findmnt "$1" > /dev/null 2>&1
}
else
ismounted() {
if [ -b "$1" ]; then
find_mount "$1" > /dev/null && return 0
return 1
fi
while read a m a || [ -n "$m" ]; do
[ "$m" = "$1" ] && return 0
done < /proc/mounts
return 1
}
fi
# root=nfs:[<server-ip>:]<root-dir>[:<nfs-options>]
# root=nfs4:[<server-ip>:]<root-dir>[:<nfs-options>]
nfsroot_to_var() {
# strip nfs[4]:
local arg="$@:"
nfs="${arg%%:*}"
arg="${arg##$nfs:}"
# check if we have a server
if strstr "$arg" ':/' ; then
server="${arg%%:/*}"
arg="/${arg##*:/}"
fi
path="${arg%%:*}"
# rest are options
options="${arg##$path}"
# strip leading ":"
options="${options##:}"
# strip ":"
options="${options%%:}"
# Does it really start with '/'?
[ -n "${path%%/*}" ] && path="error";
#Fix kernel legacy style separating path and options with ','
if [ "$path" != "${path#*,}" ] ; then
options=${path#*,}
path=${path%%,*}
fi
}
# Create udev rule match for a device with its device name, or the udev property
# ID_FS_UUID or ID_FS_LABEL
#
# example:
# udevmatch LABEL=boot
# prints:
# ENV{ID_FS_LABEL}="boot"
#
# TODO: symlinks
udevmatch() {
case "$1" in
UUID=????????-????-????-????-????????????|LABEL=*|PARTLABEL=*|PARTUUID=????????-????-????-????-????????????)
printf 'ENV{ID_FS_%s}=="%s"' "${1%%=*}" "${1#*=}"
;;
UUID=*)
printf 'ENV{ID_FS_UUID}=="%s*"' "${1#*=}"
;;
PARTUUID=*)
printf 'ENV{ID_FS_PARTUUID}=="%s*"' "${1#*=}"
;;
/dev/?*) printf -- 'KERNEL=="%s"' "${1#/dev/}" ;;
*) return 255 ;;
esac
}
# Prints unique path for potential file inside specified directory. It consists
# of specified directory, prefix and number at the end which is incremented
# until non-existing file is found.
#
# funiq dir prefix
#
# example:
# # ls /mnt
# cdrom0 cdrom1
#
# # funiq /mnt cdrom
# /mnt/cdrom2
funiq() {
local dir="$1"; local prefix="$2"
local i=0
[ -d "${dir}" ] || return 1
while [ -e "${dir}/${prefix}$i" ]; do
i=$(($i+1)) || return 1
done
echo "${dir}/${prefix}$i"
}
# Creates unique directory and prints its path. It's using funiq to generate
# path.
#
# mkuniqdir subdir new_dir_name
mkuniqdir() {
local dir="$1"; local prefix="$2"
local retdir; local retdir_new
[ -d "${dir}" ] || mkdir -m 0755 -p "${dir}" || return 1
retdir=$(funiq "${dir}" "${prefix}") || return 1
until mkdir -m 0755 "${retdir}" 2>/dev/null; do
retdir_new=$(funiq "${dir}" "${prefix}") || return 1
[ "$retdir_new" = "$retdir" ] && return 1
retdir="$retdir_new"
done
echo "${retdir}"
}
# Copy the contents of SRC into DEST, merging the contents of existing
# directories (kinda like rsync, or cpio -p).
# Creates DEST if it doesn't exist. Overwrites files with the same names.
#
# copytree SRC DEST
copytree() {
local src="$1" dest="$2"
mkdir -p "$dest"; dest=$(readlink -e -q "$dest")
( cd "$src"; cp -af . -t "$dest" )
}
# Evaluates command for UUIDs either given as arguments for this function or all
# listed in /dev/disk/by-uuid. UUIDs doesn't have to be fully specified. If
# beginning is given it is expanded to all matching UUIDs. To pass full UUID to
# your command use '$___' as a place holder. Remember to escape '$'!
#
# foreach_uuid_until [ -p prefix ] command UUIDs
#
# prefix - string to put just before $___
# command - command to be evaluated
# UUIDs - list of UUIDs separated by space
#
# The function returns after *first successful evaluation* of the given command
# with status 0. If evaluation fails for every UUID function returns with
# status 1.
#
# Example:
# foreach_uuid_until "mount -U \$___ /mnt; echo OK; umount /mnt" \
# "01234 f512 a235567f-12a3-c123-a1b1-01234567abcb"
foreach_uuid_until() (
cd /dev/disk/by-uuid
[ "$1" = -p ] && local prefix="$2" && shift 2
local cmd="$1"; shift; local uuids_list="$*"
local uuid; local full_uuid; local ___
[ -n "${cmd}" ] || return 1
for uuid in ${uuids_list:-*}; do
for full_uuid in ${uuid}*; do
[ -e "${full_uuid}" ] || continue
___="${prefix}${full_uuid}"
eval ${cmd} && return 0
done
done
return 1
)
# Get kernel name for given device. Device may be the name too (then the same
# is returned), a symlink (full path), UUID (prefixed with "UUID=") or label
# (prefixed with "LABEL="). If just a beginning of the UUID is specified or
# even an empty, function prints all device names which UUIDs match - every in
# single line.
#
# NOTICE: The name starts with "/dev/".
#
# Example:
# devnames UUID=123
# May print:
# /dev/dm-1
# /dev/sdb1
# /dev/sdf3
devnames() {
local dev="$1"; local d; local names
case "$dev" in
UUID=*)
dev="$(foreach_uuid_until '! blkid -U $___' "${dev#UUID=}")" \
&& return 255
[ -z "$dev" ] && return 255
;;
LABEL=*) dev="$(blkid -L "${dev#LABEL=}")" || return 255 ;;
/dev/?*) ;;
*) return 255 ;;
esac
for d in $dev; do
names="$names
$(readlink -e -q "$d")" || return 255
done
echo "${names#
}"
}
usable_root() {
local _i
[ -d "$1" ] || return 1
for _i in "$1"/usr/lib*/ld-*.so "$1"/lib*/ld-*.so; do
[ -e "$_i" ] && return 0
done
for _i in proc sys dev; do
[ -e "$1"/$_i ] || return 1
done
return 0
}
inst_hook() {
local _hookname _unique _name _job _exe
while [ $# -gt 0 ]; do
case "$1" in
--hook)
_hookname="/$2";shift;;
--unique)
_unique="yes";;
--name)
_name="$2";shift;;
*)
break;;
esac
shift
done
if [ -z "$_unique" ]; then
_job="${_name}$$"
else
_job="${_name:-$1}"
_job=${_job##*/}
fi
_exe=$1
shift
[ -x "$_exe" ] || _exe=$(command -v $_exe)
if [ -n "$onetime" ]; then
{
echo '[ -e "$_job" ] && rm -f -- "$_job"'
echo "$_exe $@"
} > "/tmp/$$-${_job}.sh"
else
echo "$_exe $@" > "/tmp/$$-${_job}.sh"
fi
mv -f "/tmp/$$-${_job}.sh" "$hookdir/${_hookname}/${_job}.sh"
}
# inst_mount_hook <mountpoint> <prio> <name> <script>
#
# Install a mount hook with priority <prio>,
# which executes <script> as soon as <mountpoint> is mounted.
inst_mount_hook() {
local _prio="$2" _jobname="$3" _script="$4"
local _hookname="mount-$(str_replace "$1" '/' '\\x2f')"
[ -d "$hookdir/${_hookname}" ] || mkdir -p "$hookdir/${_hookname}"
inst_hook --hook "$_hookname" --unique --name "${_prio}-${_jobname}" "$_script"
}
# add_mount_point <dev> <mountpoint> <filesystem> <fsopts>
#
# Mount <dev> on <mountpoint> with <filesystem> and <fsopts>
# and call any mount hooks, as soon, as it is mounted
add_mount_point() {
local _dev="$1" _mp="$2" _fs="$3" _fsopts="$4"
local _hookname="mount-$(str_replace "$2" '/' '\\x2f')"
local _devname="dev-$(str_replace "$1" '/' '\\x2f')"
echo "$_dev $_mp $_fs $_fsopts 0 0" >> /etc/fstab
exec 7>/etc/udev/rules.d/99-mount-${_devname}.rules
echo 'SUBSYSTEM!="block", GOTO="mount_end"' >&7
echo 'ACTION!="add|change", GOTO="mount_end"' >&7
if [ -n "$_dev" ]; then
udevmatch "$_dev" >&7 || {
warn "add_mount_point dev=$_dev incorrect!"
continue
}
printf ', ' >&7
fi
{
printf -- 'RUN+="%s --unique --onetime ' $(command -v initqueue)
printf -- '--name mount-%%k '
printf -- '%s %s"\n' "$(command -v mount_hook)" "${_mp}"
} >&7
echo 'LABEL="mount_end"' >&7
exec 7>&-
}
# wait_for_mount <mountpoint>
#
# Installs a initqueue-finished script,
# which will cause the main loop only to exit,
# if <mountpoint> is mounted.
wait_for_mount()
{
local _name
_name="$(str_replace "$1" '/' '\\x2f')"
printf '. /lib/dracut-lib.sh\nismounted "%s"\n' $1 \
>> "$hookdir/initqueue/finished/ismounted-${_name}.sh"
{
printf 'ismounted "%s" || ' $1
printf 'warn "\"%s\" is not mounted"\n' $1
} >> "$hookdir/emergency/90-${_name}.sh"
}
# get a systemd-compatible unit name from a path
# (mimicks unit_name_from_path_instance())
dev_unit_name()
{
local dev="$1"
if command -v systemd-escape >/dev/null; then
systemd-escape -p -- "$dev"
return
fi
if [ "$dev" = "/" -o -z "$dev" ]; then
printf -- "-"
exit 0
fi
dev="${1%%/}"
dev="${dev##/}"
dev="$(str_replace "$dev" '\' '\x5c')"
dev="$(str_replace "$dev" '-' '\x2d')"
if [ "${dev##.}" != "$dev" ]; then
dev="\x2e${dev##.}"
fi
dev="$(str_replace "$dev" '/' '-')"
printf -- "%s" "$dev"
}
# set_systemd_timeout_for_dev <dev>
# Set 'rd.timeout' as the systemd timeout for <dev>
set_systemd_timeout_for_dev()
{
local _name
local _needreload
local _noreload
local _timeout
if [ "$1" = "-n" ]; then
_noreload=1
shift
fi
_timeout=$(getarg rd.timeout)
_timeout=${_timeout:-0}
if [ -n "$DRACUT_SYSTEMD" ]; then
_name=$(dev_unit_name "$1")
if ! [ -L ${PREFIX}/etc/systemd/system/initrd.target.wants/${_name}.device ]; then
[ -d ${PREFIX}/etc/systemd/system/initrd.target.wants ] || mkdir -p ${PREFIX}/etc/systemd/system/initrd.target.wants
ln -s ../${_name}.device ${PREFIX}/etc/systemd/system/initrd.target.wants/${_name}.device
type mark_hostonly >/dev/null 2>&1 && mark_hostonly /etc/systemd/system/initrd.target.wants/${_name}.device
_needreload=1
fi
if ! [ -f ${PREFIX}/etc/systemd/system/${_name}.device.d/timeout.conf ]; then
mkdir -p ${PREFIX}/etc/systemd/system/${_name}.device.d
{
echo "[Unit]"
echo "JobTimeoutSec=$_timeout"
echo "JobRunningTimeoutSec=$_timeout"
} > ${PREFIX}/etc/systemd/system/${_name}.device.d/timeout.conf
type mark_hostonly >/dev/null 2>&1 && mark_hostonly /etc/systemd/system/${_name}.device.d/timeout.conf
_needreload=1
fi
if [ -z "$PREFIX" ] && [ "$_needreload" = 1 ] && [ -z "$_noreload" ]; then
/sbin/initqueue --onetime --unique --name daemon-reload systemctl daemon-reload
fi
fi
}
# wait_for_dev <dev>
#
# Installs a initqueue-finished script,
# which will cause the main loop only to exit,
# if the device <dev> is recognized by the system.
wait_for_dev()
{
local _name
local _noreload
if [ "$1" = "-n" ]; then
_noreload=-n
shift
fi
_name="$(str_replace "$1" '/' '\x2f')"
type mark_hostonly >/dev/null 2>&1 && mark_hostonly "$hookdir/initqueue/finished/devexists-${_name}.sh"
[ -e "${PREFIX}$hookdir/initqueue/finished/devexists-${_name}.sh" ] && return 0
printf '[ -e "%s" ]\n' $1 \
>> "${PREFIX}$hookdir/initqueue/finished/devexists-${_name}.sh"
{
printf '[ -e "%s" ] || ' $1
printf 'warn "\"%s\" does not exist"\n' $1
} >> "${PREFIX}$hookdir/emergency/80-${_name}.sh"
set_systemd_timeout_for_dev $_noreload $1
}
cancel_wait_for_dev()
{
local _name
_name="$(str_replace "$1" '/' '\x2f')"
rm -f -- "$hookdir/initqueue/finished/devexists-${_name}.sh"
rm -f -- "$hookdir/emergency/80-${_name}.sh"
if [ -n "$DRACUT_SYSTEMD" ]; then
_name=$(dev_unit_name "$1")
rm -f -- ${PREFIX}/etc/systemd/system/initrd.target.wants/${_name}.device
rm -f -- ${PREFIX}/etc/systemd/system/${_name}.device.d/timeout.conf
/sbin/initqueue --onetime --unique --name daemon-reload systemctl daemon-reload
fi
}
killproc() {
debug_off
local _exe="$(command -v $1)"
local _sig=$2
local _i
[ -x "$_exe" ] || return 1
for _i in /proc/[0-9]*; do
[ "$_i" = "/proc/1" ] && continue
if [ -e "$_i"/_exe ] && [ "$_i/_exe" -ef "$_exe" ] ; then
kill $_sig ${_i##*/}
fi
done
debug_on
}
need_shutdown() {
>/run/initramfs/.need_shutdown
}
wait_for_loginit()
{
[ "$RD_DEBUG" = "yes" ] || return
[ -e /run/initramfs/loginit.pipe ] || return
debug_off
echo "DRACUT_LOG_END"
exec 0<>/dev/console 1<>/dev/console 2<>/dev/console
# wait for loginit
i=0
while [ $i -lt 10 ]; do
if [ ! -e /run/initramfs/loginit.pipe ]; then
j=$(jobs)
[ -z "$j" ] && break
[ -z "${j##*Running*}" ] || break
fi
sleep 0.1
i=$(($i+1))
done
if [ $i -eq 10 ]; then
kill %1 >/dev/null 2>&1
kill $(while read line || [ -n "$line" ];do echo $line;done</run/initramfs/loginit.pid)
fi
setdebug
rm -f -- /run/initramfs/loginit.pipe /run/initramfs/loginit.pid
}
# pidof version for root
if ! command -v pidof >/dev/null 2>/dev/null; then
pidof() {
debug_off
local _cmd
local _exe
local _rl
local _ret=1
local i
_cmd="$1"
if [ -z "$_cmd" ]; then
debug_on
return 1
fi
_exe=$(command -v "$1")
for i in /proc/*/exe; do
[ -e "$i" ] || continue
if [ -n "$_exe" ]; then
[ "$i" -ef "$_exe" ] || continue
else
_rl=$(readlink -f "$i");
[ "${_rl%/$_cmd}" != "$_rl" ] || continue
fi
i=${i%/exe}
echo ${i##/proc/}
_ret=0
done
debug_on
return $_ret
}
fi
_emergency_shell()
{
local _name="$1"
if [ -n "$DRACUT_SYSTEMD" ]; then
> /.console_lock
echo "PS1=\"$_name:\\\${PWD}# \"" >/etc/profile
systemctl start dracut-emergency.service
rm -f -- /etc/profile
rm -f -- /.console_lock
else
debug_off
source_hook "$hook"
echo
/sbin/rdsosreport
echo 'You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or /boot'
echo 'after mounting them and attach it to a bug report.'
if ! RD_DEBUG= getargbool 0 rd.debug -d -y rdinitdebug -d -y rdnetdebug; then
echo
echo 'To get more debug information in the report,'
echo 'reboot with "rd.debug" added to the kernel command line.'
fi
echo
echo 'Dropping to debug shell.'
echo
export PS1="$_name:\${PWD}# "
[ -e /.profile ] || >/.profile
_ctty="$(RD_DEBUG= getarg rd.ctty=)" && _ctty="/dev/${_ctty##*/}"
if [ -z "$_ctty" ]; then
_ctty=console
while [ -f /sys/class/tty/$_ctty/active ]; do
_ctty=$(cat /sys/class/tty/$_ctty/active)
_ctty=${_ctty##* } # last one in the list
done
_ctty=/dev/$_ctty
fi
[ -c "$_ctty" ] || _ctty=/dev/tty1
case "$(/usr/bin/setsid --help 2>&1)" in *--ctty*) CTTY="--ctty";; esac
setsid $CTTY /bin/sh -i -l 0<>$_ctty 1<>$_ctty 2<>$_ctty
fi
}
emergency_shell()
{
local _ctty
set +e
local _rdshell_name="dracut" action="Boot" hook="emergency"
local _emergency_action
if [ "$1" = "-n" ]; then
_rdshell_name=$2
shift 2
elif [ "$1" = "--shutdown" ]; then
_rdshell_name=$2; action="Shutdown"; hook="shutdown-emergency"
if type plymouth >/dev/null 2>&1; then
plymouth --hide-splash
elif [ -x /oldroot/bin/plymouth ]; then
/oldroot/bin/plymouth --hide-splash
fi
shift 2
fi
echo ; echo
warn "$*"
echo
_emergency_action=$(getarg rd.emergency)
[ -z "$_emergency_action" ] \
&& [ -e /run/initramfs/.die ] \
&& _emergency_action=halt
if getargbool 1 rd.shell -d -y rdshell || getarg rd.break -d rdbreak; then
_emergency_shell $_rdshell_name
else
source_hook "$hook"
warn "$action has failed. To debug this issue add \"rd.shell rd.debug\" to the kernel command line."
[ -z "$_emergency_action" ] && _emergency_action=halt
fi
case "$_emergency_action" in
reboot)
reboot || exit 1;;
poweroff)
poweroff || exit 1;;
halt)
halt || exit 1;;
esac
}
# Retain the values of these variables but ensure that they are unexported
# This is a POSIX-compliant equivalent of bash's "export -n"
export_n()
{
local var
local val
for var in "$@"; do
eval val=\$$var
unset $var
[ -n "$val" ] && eval $var=\"$val\"
done
}
# returns OK if list1 contains all elements of list2, i.e. checks if list2 is a
# sublist of list1. An order and a duplication doesn't matter.
#
# $1 = separator
# $2 = list1
# $3 = list2
# $4 = ignore values, separated by $1
listlist() {
local _sep="$1"
local _list="${_sep}${2}${_sep}"
local _sublist="$3"
[ -n "$4" ] && local _iglist="${_sep}${4}${_sep}"
local IFS="$_sep"
local _v
[ "$_list" = "$_sublist" ] && return 0
for _v in $_sublist; do
if [ -n "$_v" ] && ! ( [ -n "$_iglist" ] && strstr "$_iglist" "$_v" )
then
strstr "$_list" "$_v" || return 1
fi
done
return 0
}
# returns OK if both lists contain the same values. An order and a duplication
# doesn't matter.
#
# $1 = separator
# $2 = list1
# $3 = list2
# $4 = ignore values, separated by $1
are_lists_eq() {
listlist "$1" "$2" "$3" "$4" && listlist "$1" "$3" "$2" "$4"
}
setmemdebug() {
if [ -z "$DEBUG_MEM_LEVEL" ]; then
export DEBUG_MEM_LEVEL=$(getargnum 0 0 5 rd.memdebug)
fi
}
setmemdebug
# parameters: func log_level prefix msg [trace_level:trace]...
make_trace_mem()
{
local log_level prefix msg msg_printed
local trace trace_level trace_in_higher_levels insert_trace
msg=$1
shift
prefix='[debug_mem]'
log_level=$DEBUG_MEM_LEVEL
if [ -z "$log_level" ] || [ "$log_level" -le 0 ]; then
return
fi
msg=$(echo $msg)
msg_printed=0
while [ $# -gt 0 ]; do
trace=${1%%:*}
trace_level=${trace%%+}
[ "$trace" != "$trace_level" ] && trace_in_higher_levels="yes"
trace=${1##*:}
if [ -z "$trace_level" ]; then
trace_level=0
fi
insert_trace=0
if [ -n "$trace_in_higher_levels" ]; then
if [ "$log_level" -ge "$trace_level" ]; then
insert_trace=1
fi
else
if [ "$log_level" -eq "$trace_level" ]; then
insert_trace=1
fi
fi
if [ $insert_trace -eq 1 ]; then
if [ $msg_printed -eq 0 ]; then
echo "$prefix $msg"
msg_printed=1
fi
show_memstats $trace
fi
shift
done
}
# parameters: type
show_memstats()
{
case $1 in
shortmem)
cat /proc/meminfo | grep -e "^MemFree" -e "^Cached" -e "^Slab"
;;
mem)
cat /proc/meminfo
;;
slab)
cat /proc/slabinfo
;;
iomem)
cat /proc/iomem
;;
esac
}
remove_hostonly_files() {
rm -fr /etc/cmdline /etc/cmdline.d/*.conf "$hookdir/initqueue/finished"
if [ -f /lib/dracut/hostonly-files ]; then
while read line || [ -n "$line" ]; do
[ -e "$line" ] || [ -h "$line" ] || continue
rm -f "$line"
done < /lib/dracut/hostonly-files
fi
}
PK �5�Z-6b�B B 99base/rdsosreport.shnu ȯ�� #!/bin/sh
echo 'Generating "/run/initramfs/rdsosreport.txt"'
[ -d /run/initramfs ] || mkdir -p /run/initramfs
exec >/run/initramfs/rdsosreport.txt 2>&1
PWFILTER='s/\(ftp:\/\/.*\):.*@/\1:*******@/g;s/\(cifs:\/\/.*\):.*@/\1:*******@/g;s/cifspass=[^ ]*/cifspass=*******/g;s/iscsi:.*@/iscsi:******@/g;s/rd.iscsi.password=[^ ]*/rd.iscsi.password=******/g;s/rd.iscsi.in.password=[^ ]*/rd.iscsi.in.password=******/g'
set -x
cat /lib/dracut/dracut-*
cat /proc/cmdline | sed -e "$PWFILTER"
[ -f /etc/cmdline ] && cat /etc/cmdline | sed -e "$PWFILTER"
for _i in /etc/cmdline.d/*.conf; do
[ -f "$_i" ] || break
echo $_i
cat $_i | sed -e "$PWFILTER"
done
cat /proc/self/mountinfo
cat /proc/mounts
blkid
blkid -o udev
ls -l /dev/disk/by*
for _i in /etc/conf.d/*.conf; do
[ -f "$_i" ] || break
echo $_i
cat $_i | sed -e "$PWFILTER"
done
if command -v lvm >/dev/null 2>/dev/null; then
lvm pvdisplay
lvm vgdisplay
lvm lvdisplay
fi
command -v dmsetup >/dev/null 2>/dev/null && dmsetup ls --tree
cat /proc/mdstat
command -v ip >/dev/null 2>/dev/null && ip addr
if command -v journalctl >/dev/null 2>/dev/null; then
journalctl -ab --no-pager -o short-monotonic | sed -e "$PWFILTER"
else
dmesg | sed -e "$PWFILTER"
[ -f /run/initramfs/init.log ] && cat /run/initramfs/init.log | sed -e "$PWFILTER"
fi
PK �5�Z�`J� � 99base/parse-root-opts.shnu ȯ�� #!/bin/sh
root=$(getarg root=)
rflags="$(getarg rootflags=)"
getargbool 0 ro && rflags="${rflags},ro"
getargbool 0 rw && rflags="${rflags},rw"
rflags="${rflags#,}"
fstype="$(getarg rootfstype=)"
if [ -z "$fstype" ]; then
fstype="auto"
fi
PK �5�Z"'��z z 99earlykdump/early-kdump.shnu ȯ�� #! /bin/sh
KEXEC=/sbin/kexec
standard_kexec_args="-p"
EARLY_KDUMP_INITRD=""
EARLY_KDUMP_KERNEL=""
EARLY_KDUMP_CMDLINE=""
EARLY_KDUMP_KERNELVER=""
EARLY_KEXEC_ARGS=""
. /etc/sysconfig/kdump
. /lib/dracut-lib.sh
. /lib/kdump-lib.sh
. /lib/kdump-logger.sh
#initiate the kdump logger
dlog_init
if [ $? -ne 0 ]; then
echo "failed to initiate the kdump logger."
exit 1
fi
prepare_parameters()
{
EARLY_KDUMP_CMDLINE=$(prepare_cmdline "${KDUMP_COMMANDLINE}" "${KDUMP_COMMANDLINE_REMOVE}" "${KDUMP_COMMANDLINE_APPEND}")
EARLY_KDUMP_KERNEL="/boot/kernel-earlykdump"
EARLY_KDUMP_INITRD="/boot/initramfs-earlykdump"
}
early_kdump_load()
{
check_kdump_feasibility
if [ $? -ne 0 ]; then
return 1
fi
if is_fadump_capable; then
dwarn "WARNING: early kdump doesn't support fadump."
return 1
fi
check_current_kdump_status
if [ $? == 0 ]; then
return 1
fi
prepare_parameters
EARLY_KEXEC_ARGS=$(prepare_kexec_args "${KEXEC_ARGS}")
# Here, only output the messages, but do not save these messages
# to a file because the target disk may not be mounted yet, the
# earlykdump is too early.
ddebug "earlykdump: $KEXEC ${EARLY_KEXEC_ARGS} $standard_kexec_args \
--command-line=$EARLY_KDUMP_CMDLINE --initrd=$EARLY_KDUMP_INITRD \
$EARLY_KDUMP_KERNEL"
$KEXEC ${EARLY_KEXEC_ARGS} $standard_kexec_args \
--command-line="$EARLY_KDUMP_CMDLINE" \
--initrd=$EARLY_KDUMP_INITRD $EARLY_KDUMP_KERNEL
if [ $? == 0 ]; then
dinfo "kexec: loaded early-kdump kernel"
return 0
else
derror "kexec: failed to load early-kdump kernel"
return 1
fi
}
set_early_kdump()
{
if getargbool 0 rd.earlykdump; then
dinfo "early-kdump is enabled."
early_kdump_load
else
dinfo "early-kdump is disabled."
fi
return 0
}
set_early_kdump
PK �5�Z��� � � 99earlykdump/module-setup.shnu ȯ�� #!/bin/bash
. /etc/sysconfig/kdump
KDUMP_KERNEL=""
KDUMP_INITRD=""
check() {
if [ ! -f /etc/sysconfig/kdump ] || [ ! -f /lib/kdump/kdump-lib.sh ]\
|| [ -n "${IN_KDUMP}" ]
then
return 1
fi
return 255
}
depends() {
echo "base shutdown"
return 0
}
prepare_kernel_initrd() {
. /lib/kdump/kdump-lib.sh
prepare_kdump_bootinfo
# $kernel is a variable from dracut
if [ "$KDUMP_KERNELVER" != $kernel ]; then
dwarn "Using kernel version '$KDUMP_KERNELVER' for early kdump," \
"but the initramfs is generated for kernel version '$kernel'"
fi
}
install() {
prepare_kernel_initrd
if [ ! -f "$KDUMP_KERNEL" ]; then
derror "Could not find required kernel for earlykdump," \
"earlykdump will not work!"
return 1
fi
if [ ! -f "$KDUMP_INITRD" ]; then
derror "Could not find required kdump initramfs for earlykdump," \
"please ensure kdump initramfs is generated first," \
"earlykdump will not work!"
return 1
fi
inst_multiple tail find cut dirname hexdump
inst_simple "/etc/sysconfig/kdump"
inst_binary "/usr/sbin/kexec"
inst_binary "/usr/bin/gawk" "/usr/bin/awk"
inst_binary "/usr/bin/logger" "/usr/bin/logger"
inst_binary "/usr/bin/printf" "/usr/bin/printf"
inst_script "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh"
inst_script "/lib/kdump/kdump-logger.sh" "/lib/kdump-logger.sh"
inst_hook cmdline 00 "$moddir/early-kdump.sh"
inst_binary "$KDUMP_KERNEL"
inst_binary "$KDUMP_INITRD"
ln_r "$KDUMP_KERNEL" "/boot/kernel-earlykdump"
ln_r "$KDUMP_INITRD" "/boot/initramfs-earlykdump"
chmod -x "${initdir}/$KDUMP_KERNEL"
}
PK �5�Z�Um�� � 99uefi-lib/uefi-lib.shnu ȯ�� #!/bin/bash
#
# Copyright 2013 Red Hat, Inc. All rights reserved.
# Copyright 2013 Harald Hoyer <harald@redhat.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
getbyte () {
local IFS= LC_CTYPE=C res c
read -r -n 1 -d '' c
res=$?
# the single quote in the argument of the printf
# yields the numeric value of $c (ASCII since LC_CTYPE=C)
[[ -n $c ]] && c=$(printf '%u' "'$c") || c=0
printf "$c"
return $res
}
getword () {
local b1 b2 val
b1=$(getbyte) || return 1
b2=$(getbyte) || return 1
(( val = b2 * 256 + b1 ))
echo $val
return 0
}
# Acpi(PNP0A08,0x0)/Pci(0x3,0x0)/Pci(0x0,0x0)/MAC(90E2BA265ED4,0x0)/Vlan(172)/Fibre(0x4EA06104A0CC0050,0x0)
uefi_device_path()
{
local IFS= LC_CTYPE=C res tt len type hextype first
first=1
while :; do
type=$(getbyte) || return 1
subtype=$(getbyte) || return 1
len=$(getword) || return 1
hextype=$(printf "%02x%02x" "$type" "$subtype")
if [[ $first == 1 ]]; then
first=0
elif [[ $hextype != "7fff" ]]; then
printf "/"
fi
case $hextype in
0101)
# PCI
tt=$(getword)
printf "PCI(0x%x,0x%x)" $(($tt / 256)) $(($tt & 255))
;;
0201)
# ACPI
printf "Acpi(0x%x,0x%x)" $(($(getword) + $(getword) * 65536)) $(($(getword) + $(getword) * 65536))
;;
0303)
# FIBRE
getword &>/dev/null
getword &>/dev/null
printf "Fibre(0x%x%x%x%x%x%x%x%x,0x%x)" \
$(getbyte) $(getbyte) $(getbyte) $(getbyte) \
$(getbyte) $(getbyte) $(getbyte) $(getbyte) \
$(( $(getword) + $(getword) * 65536 + 4294967296 * ( $(getword) + $(getword) * 65536 ) ))
;;
030b)
# MAC
printf "MAC(%02x%02x%02x%02x%02x%02x," $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte)
read -r -N 26 tt || return 1
printf "0x%x)" $(getbyte)
;;
0314)
# VLAN
printf "VLAN(%d)" $(getword)
;;
7fff)
# END
printf "\n"
return 0
;;
*)
printf "Unknown(Type:%d SubType:%d len=%d)" "$type" "$subtype" "$len"
read -r -N $(($len-4)) tt || return 1
;;
esac
done
}
get_fcoe_boot_mac()
{
data=${1:-/sys/firmware/efi/vars/FcoeBootDevice-a0ebca23-5f9c-447a-a268-22b6c158c2ac/data}
[ -f $data ] || return 1
local IFS= LC_CTYPE=C tt len type hextype
first=1
while :; do
type=$(getbyte) || return 1
subtype=$(getbyte) || return 1
len=$(getword) || return 1
hextype=$(printf "%02x%02x" "$type" "$subtype")
case $hextype in
030b)
# MAC
printf "%02x:%02x:%02x:%02x:%02x:%02x" $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte) $(getbyte)
read -r -N 27 tt || return 1
;;
7fff)
# END
return 0
;;
*)
read -r -N $(($len-4)) tt || return 1
;;
esac
done < $data
}
get_fcoe_boot_vlan()
{
data=${1:-/sys/firmware/efi/vars/FcoeBootDevice-a0ebca23-5f9c-447a-a268-22b6c158c2ac/data}
[ -f $data ] || return 1
local IFS= LC_CTYPE=C tt len type hextype
first=1
while :; do
type=$(getbyte) || return 1
subtype=$(getbyte) || return 1
len=$(getword) || return 1
hextype=$(printf "%02x%02x" "$type" "$subtype")
case $hextype in
0314)
# VLAN
printf "%d" $(getword)
;;
7fff)
# END
return 0
;;
*)
read -r -N $(($len-4)) tt || return 1
;;
esac
done < $data
}
PK �5�Z;}� � � 99uefi-lib/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
echo bash
return 0
}
# called by dracut
install() {
inst_simple "$moddir/uefi-lib.sh" "/lib/uefi-lib.sh"
}
PK �5�ZXd�ea a 95cifs/cifsroot.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
. /lib/cifs-lib.sh
[ "$#" = 3 ] || exit 1
# root is in the form root=cifs://user:pass@[server]/[folder] either from
# cmdline or dhcp root-path
netif="$1"
root="$2"
NEWROOT="$3"
cifs_to_var $root
echo server: $server
echo path: $path
echo options: $options
mount.cifs //$server/$path $NEWROOT -o $options && { [ -e /dev/root ] || ln -s null /dev/root ; }
# inject new exit_if_exists
echo 'settle_exit_if_exists="--exit-if-exists=/dev/root"; rm -f -- "$job"' > $hookdir/initqueue/cifs.sh
# force udevsettle to break
> $hookdir/initqueue/work
PK �5�Z <M�� � 95cifs/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
# If our prerequisites are not met, fail anyways.
require_binaries mount.cifs || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ "$fs" == "cifs" ]] && return 0
done
return 255
}
return 0
}
# called by dracut
depends() {
# We depend on network modules being loaded
echo network
}
# called by dracut
installkernel() {
instmods cifs ipv6
# hash algos
instmods md4 md5 sha256
# ciphers
instmods aes arc4 des ecb
# macs
instmods hmac cmac
}
# called by dracut
install() {
local _i
local _nsslibs
inst_multiple -o mount.cifs
inst_multiple /etc/services /etc/nsswitch.conf /etc/protocols
inst_libdir_file 'libcap-ng.so*'
_nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
| tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
_nsslibs=${_nsslibs#|}
_nsslibs=${_nsslibs%|}
inst_libdir_file -n "$_nsslibs" 'libnss_*.so*'
inst_hook cmdline 90 "$moddir/parse-cifsroot.sh"
inst "$moddir/cifsroot.sh" "/sbin/cifsroot"
inst "$moddir/cifs-lib.sh" "/lib/cifs-lib.sh"
dracut_need_initqueue
}
PK �5�Z�r��� � 95cifs/cifs-lib.shnu ȯ�� #!/bin/sh
# cifs_to_var CIFSROOT
# use CIFSROOT to set $server, $path, and $options.
# CIFSROOT is something like: cifs://[<username>[:<password>]]@<host>/<path>
# NETIF is used to get information from DHCP options, if needed.
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
cifs_to_var() {
local cifsuser; local cifspass
# Check required arguments
server=${1##cifs://}
cifsuser=${server%@*}
cifspass=${cifsuser#*:}
if [ "$cifspass" != "$cifsuser" ]; then
cifsuser=${cifsuser%:*}
else
cifspass=$(getarg cifspass)
fi
if [ "$cifsuser" != "$server" ]; then
server="${server#*@}"
else
cifsuser=$(getarg cifsuser)
fi
path=${server#*/}
server=${server%/*}
if [ ! "$cifsuser" -o ! "$cifspass" ]; then
die "For CIFS support you need to specify a cifsuser and cifspass either in the cifsuser and cifspass commandline parameters or in the root= CIFS URL."
fi
options="user=$cifsuser,pass=$cifspass"
}
PK �5�Z��LD� � 95cifs/parse-cifsroot.shnu ȯ�� #!/bin/sh
#
# root=cifs://[user:pass@]<server>/<folder>
#
# This syntax can come from DHCP root-path as well.
#
# If a username or password are not specified as part of the root, then they
# will be pulled from cifsuser and cifspass on the kernel command line,
# respectively.
#
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
. /lib/cifs-lib.sh
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
if [ -z "$netroot" ]; then
for netroot in $(getargs netroot=); do
[ "${netroot%%:*}" = "cifs" ] && break
done
[ "${netroot%%:*}" = "cifs" ] || unset netroot
fi
# Root takes precedence over netroot
if [ "${root%%:*}" = "cifs" ] ; then
if [ -n "$netroot" ] ; then
warn "root takes precedence over netroot. Ignoring netroot"
fi
netroot=$root
unset root
fi
# If it's not cifs we don't continue
[ "${netroot%%:*}" = "cifs" ] || return
# Check required arguments
cifs_to_var $netroot
# If we don't have a server, we need dhcp
if [ -z "$server" ] ; then
DHCPORSERVER="1"
fi;
# Done, all good!
rootok=1
echo '[ -e $NEWROOT/proc ]' > $hookdir/initqueue/finished/cifsroot.sh
PK �5�ZvM?� � 99fs-lib/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
return 0
}
# called by dracut
depends() {
return 0
}
echo_fs_helper() {
local dev=$1 fs=$2
case "$fs" in
xfs)
echo -n " xfs_db xfs_repair xfs_check xfs_metadump "
;;
ext?)
echo -n " e2fsck "
;;
jfs)
echo -n " jfs_fsck "
;;
reiserfs)
echo -n " reiserfsck "
;;
btrfs)
echo -n " btrfsck "
;;
esac
echo -n " fsck.$fs "
return 0
}
include_fs_helper_modules() {
local dev=$1 fs=$2
case "$fs" in
xfs|btrfs|ext4)
instmods crc32c
;;
f2fs)
instmods crc32
;;
esac
}
# called by dracut
installkernel() {
# xfs/btrfs/ext4 need crc32c, f2fs needs crc32
if [[ $hostonly ]]; then
for_each_host_dev_fs include_fs_helper_modules
:
else
instmods crc32c crc32
fi
}
# called by dracut
install() {
local _helpers
inst "$moddir/fs-lib.sh" "/lib/fs-lib.sh"
> ${initdir}/etc/fstab.empty
[[ "$nofscks" = "yes" ]] && return
if [[ "$fscks" = "${fscks#*[^ ]*}" ]]; then
_helpers="\
umount mount /sbin/fsck*
xfs_db xfs_check xfs_repair xfs_metadump
e2fsck jfs_fsck reiserfsck btrfsck
"
if [[ $hostonly ]]; then
_helpers="umount mount "
_helpers+=$(for_each_host_dev_fs echo_fs_helper)
fi
else
_helpers="$fscks"
fi
if [[ "$_helpers" == *e2fsck* ]] && [ -e /etc/e2fsck.conf ]; then
inst_simple /etc/e2fsck.conf
fi
inst_multiple -o $_helpers fsck
}
PK �5�Z���� � 99fs-lib/fs-lib.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
fsck_ask_reboot() {
info "note - fsck suggests reboot, if you"
info "leave shell, booting will continue normally"
emergency_shell -n "(reboot ?)"
}
fsck_ask_err() {
warn "*** An error occurred during the file system check."
warn "*** Dropping you to a shell; the system will try"
warn "*** to mount the filesystem(s), when you leave the shell."
emergency_shell -n "(Repair filesystem)"
}
# inherits: _ret _drv _out
fsck_tail() {
[ $_ret -gt 0 ] && warn "$_drv returned with $_ret"
if [ $_ret -ge 4 ]; then
[ -n "$_out" ] && echo "$_out"|vwarn
fsck_ask_err
else
[ -n "$_out" ] && echo "$_out"|vinfo
[ $_ret -ge 2 ] && fsck_ask_reboot
fi
}
# note: this function sets _drv of the caller
fsck_able() {
case "$1" in
xfs)
# {
# type xfs_db &&
# type xfs_repair &&
# type xfs_check &&
# type mount &&
# type umount
# } >/dev/null 2>&1 &&
# _drv="_drv=none fsck_drv_xfs" &&
# return 0
return 1
;;
ext?)
type e2fsck >/dev/null 2>&1 &&
_drv="fsck_drv_com e2fsck" &&
return 0
;;
f2fs)
type fsck.f2fs >/dev/null 2>&1 &&
_drv="fsck_drv_com fsck.f2fs" &&
return 0
;;
jfs)
type jfs_fsck >/dev/null 2>&1 &&
_drv="fsck_drv_com jfs_fsck" &&
return 0
;;
reiserfs)
type reiserfsck >/dev/null 2>&1 &&
_drv="fsck_drv_com reiserfsck" &&
return 0
;;
btrfs)
# type btrfsck >/dev/null 2>&1 &&
# _drv="_drv=none fsck_drv_btrfs" &&
# return 0
return 1
;;
nfs*)
# nfs can be a nop, returning success
_drv=":" &&
return 0
;;
*)
type fsck >/dev/null 2>&1 &&
_drv="fsck_drv_std fsck" &&
return 0
;;
esac
return 1
}
# note: all drivers inherit: _drv _fop _dev
fsck_drv_xfs() {
# xfs fsck is not necessary... Either it mounts or not
return 0
}
fsck_drv_btrfs() {
# btrfs fsck is not necessary... Either it mounts or not
return 0
}
# common code for checkers that follow usual subset of options and return codes
fsck_drv_com() {
local _drv="$1"
local _ret
local _out
if ! strglobin "$_fop" "-[ynap]"; then
_fop="-a ${_fop}"
fi
info "issuing $_drv $_fop $_dev"
# we enforce non-interactive run, so $() is fine
_out=$($_drv $_fop "$_dev")
_ret=$?
fsck_tail
return $_ret
}
# code for generic fsck, if the filesystem checked is "unknown" to us
fsck_drv_std() {
local _ret
local _out
unset _out
info "issuing fsck $_fop $_dev"
# note, we don't enforce -a here, thus fsck is being run (in theory)
# interactively; otherwise some tool might complain about lack of terminal
# (and using -a might not be safe)
fsck $_fop "$_dev" >/dev/console 2>&1
_ret=$?
fsck_tail
return $_ret
}
# checks single filesystem, relying on specific "driver"; we don't rely on
# automatic checking based on fstab, so empty one is passed;
# takes 4 arguments - device, filesystem, filesystem options, additional fsck options;
# first 2 arguments are mandatory (fs may be auto or "")
# returns 255 if filesystem wasn't checked at all (e.g. due to lack of
# necessary tools or insufficient options)
fsck_single() {
local FSTAB_FILE=/etc/fstab.empty
local _dev="$1"
local _fs="${2:-auto}"
local _fsopts="$3"
local _fop="$4"
local _drv
[ $# -lt 2 ] && return 255
# if UUID= marks more than one device, take only the first one
[ -e "$_dev" ] || _dev=$(devnames "$_dev"| while read line || [ -n "$line" ]; do if [ -n "$line" ]; then echo $line; break;fi;done)
[ -e "$_dev" ] || return 255
_fs=$(det_fs "$_dev" "$_fs")
fsck_able "$_fs" || return 255
info "Checking $_fs: $_dev"
export FSTAB_FILE
eval "$_drv"
return $?
}
# takes list of filesystems to check in parallel; we don't rely on automatic
# checking based on fstab, so empty one is passed
fsck_batch() {
local FSTAB_FILE=/etc/fstab.empty
local _drv=fsck
local _dev
local _ret
local _out
[ $# -eq 0 ] || ! type fsck >/dev/null 2>&1 && return 255
info "Checking filesystems (fsck -M -T -a):"
for _dev in "$@"; do
info " $_dev"
done
export FSTAB_FILE
_out="$(fsck -M -T "$@" -- -a)"
_ret=$?
fsck_tail
return $_ret
}
# verify supplied filesystem type:
# if user provided the fs and we couldn't find it, assume user is right
# if we found the fs, assume we're right
det_fs() {
local _dev="$1"
local _orig="${2:-auto}"
local _fs
_fs=$(udevadm info --query=env --name="$_dev" | \
while read line || [ -n "$line" ]; do
if str_starts $line "ID_FS_TYPE="; then
echo ${line#ID_FS_TYPE=}
break
fi
done)
_fs=${_fs:-auto}
if [ "$_fs" = "auto" ]; then
_fs="$_orig"
fi
echo "$_fs"
}
write_fs_tab() {
local _o
local _rw
local _root
local _rootfstype
local _rootflags
local _fspassno
_fspassno="0"
_root="$1"
_rootfstype="$2"
_rootflags="$3"
[ -z "$_rootfstype" ] && _rootfstype=$(getarg rootfstype=)
[ -z "$_rootflags" ] && _rootflags=$(getarg rootflags=)
[ -z "$_rootfstype" ] && _rootfstype="auto"
if [ -z "$_rootflags" ]; then
_rootflags="ro,x-initrd.mount"
else
_rootflags="ro,$_rootflags,x-initrd.mount"
fi
_rw=0
CMDLINE=$(getcmdline)
for _o in $CMDLINE; do
case $_o in
rw)
_rw=1;;
ro)
_rw=0;;
esac
done
if [ "$_rw" = "1" ]; then
_rootflags="$_rootflags,rw"
if ! getargbool 0 rd.skipfsck; then
_fspassno="1"
fi
fi
echo "$_root /sysroot $_rootfstype $_rootflags $_fspassno 0" >> /etc/fstab
if type systemctl >/dev/null 2>/dev/null; then
systemctl daemon-reload
systemctl --no-block start initrd-root-fs.target
fi
}
PK �5�Z��Z1� � 03modsign/module-setup.shnu ȯ�� #!/bin/bash
#
# Licensed under the GPLv2
#
# Copyright 2013 Red Hat, Inc.
# Peter Jones <pjones@redhat.com>
# called by dracut
check() {
require_binaries keyctl || return 1
# do not include module in hostonly mode,
# if no keys are present
if [[ $hostonly ]]; then
x=$(echo /lib/modules/keys/*)
[[ "${x}" = "/lib/modules/keys/*" ]] && return 255
fi
return 0
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_dir /lib/modules/keys
inst_binary keyctl
inst_hook pre-trigger 01 "$moddir/load-modsign-keys.sh"
for x in /lib/modules/keys/* ; do
[[ "${x}" = "/lib/modules/keys/*" ]] && break
inst_simple "${x}"
done
}
PK �5�Z�`�~� � 03modsign/load-modsign-keys.shnu ȯ�� #!/bin/sh
#
# Licensed under the GPLv2
#
# Copyright 2013 Red Hat, Inc.
# Peter Jones <pjones@redhat.com>
for x in /lib/modules/keys/* ; do
[ "${x}" = "/lib/modules/keys/*" ] && break
keyctl padd asymmetric "" @s < ${x}
done
PK �5�ZujM / 99microcode_ctl-fw_dir_override/module-setup.shnu ȯ�� #!/bin/bash
# Hack in additional firmware directories for supported caveats.
#
# SPDX-License-Identifier: CC0-1.0
check() {
return 0
}
install() {
local FW_DIR=/lib/firmware
local DATA_DIR=/usr/share/microcode_ctl/ucode_with_caveats
local CFG_DIR="/etc/microcode_ctl/ucode_with_caveats"
local check_caveats=/usr/libexec/microcode_ctl/check_caveats
local fw_path_para=$(< /sys/module/firmware_class/parameters/path)
local verbose_opt
local cc_out
local path
local ignored
local do_skip_host_only
local p
verbose_opt=
[ 4 -gt "$stdloglvl" ] || verbose_opt="-v"
# HACK: we override external fw_dir variable in order to get
# an additional ucode based on the kernel version.
dinfo " microcode_ctl module: mangling fw_dir"
[ -z "$fw_dir_l" ] || {
dinfo " microcode_ctl: avoid touching fw_dir as" \
"it has been changed (fw_dir_l is '$fw_dir_l')"
return 0
}
# Reset fw_dir to avoid inclusion of kernel-version-specific directories
# populated with microcode for the late load, only in case it is set
# to the default value to avoid meddling with user-enforced changes.
# The second variant has been introduced in dracut-057~5.
[ \( "x$fw_dir" != \
"x/lib/firmware/updates /lib/firmware /lib/firmware/$kernel" \) -a \
\( "x$fw_dir" != \
"x${fw_path_para:+$fw_path_para }/lib/firmware/updates/$kernel /lib/firmware/updates /lib/firmware/$kernel /lib/firmware" \) ] || {
fw_dir="/lib/firmware/updates /lib/firmware"
dinfo " microcode_ctl: reset fw_dir to \"${fw_dir}\""
}
fw_dir_add=""
while read -d $'\n' -r i; do
dinfo " microcode_ctl: processing data directory " \
"\"$DATA_DIR/$i\"..."
if [ "x" != "x$hostonly" ]; then
do_skip_host_only=0
local sho_overrides="
$CFG_DIR/skip-host-only-check
$CFG_DIR/skip-host-only-check-$i
$FW_DIR/$kernel/skip-host-only-check
$FW_DIR/$kernel/skip-host-only-check-$i"
for p in $(echo "$sho_overrides"); do
[ -e "$p" ] || continue
do_skip_host_only=1
dinfo " microcode_ctl: $i; skipping" \
"Host-Only check, since \"$p\" exists."
break
done
else
do_skip_host_only=1
fi
match_model_opt=""
[ 1 = "$do_skip_host_only" ] || match_model_opt="-m"
if ! cc_out=$($check_caveats -e -k "$kernel" -c "$i" \
$verbose_opt $match_model_opt)
then
dinfo " microcode_ctl: kernel version \"$kernel\"" \
"failed early load check for \"$i\", skipping"
continue
fi
path=$(printf "%s" "$cc_out" | sed -n 's/^paths //p')
[ -n "$path" ] || {
ignored=$(printf "%s" "$cc_out" | \
sed -n 's/^skip_cfgs //p')
if [ -n "$ignored" ]; then
dinfo " microcode_ctl: configuration" \
"\"$i\" is ignored"
else
dinfo " microcode_ctl: no microcode paths" \
"are associated with \"$i\", skipping"
fi
continue
}
dinfo " microcode_ctl: $i: caveats check for kernel" \
"version \"$kernel\" passed, adding" \
"\"$DATA_DIR/$i\" to fw_dir variable"
if [ 0 -eq "$do_skip_host_only" ]; then
fw_dir_add="$DATA_DIR/$i "
else
fw_dir_add="$DATA_DIR/$i $fw_dir_add"
fi
# The list of directories is reverse-sorted in order to preserve the
# "last wins" policy in case of presence of multiple microcode
# revisions.
#
# In case of hostonly == 0, all microcode revisions will be included,
# but since the microcode search is done with the "first wins" policy
# by the (early) microcode loading code, the correct microcode revision
# still has to be picked.
#
# Note that dracut without patch [1] puts only the last directory
# in the early cpio; we try to address this by putting only the last
# matching caveat in the search path, but that workaround works only
# for host-only mode; non-host-only mode early cpio generation is still
# broken without that patch.
#
# [1] https://github.com/dracutdevs/dracut/commit/c44d2252bb4b
done <<-EOF
$(find "$DATA_DIR" -maxdepth 1 -mindepth 1 -type d -printf "%f\n" \
| LC_ALL=C sort)
EOF
fw_dir="${fw_dir_add}${fw_dir}"
dinfo " microcode_ctl: final fw_dir: \"${fw_dir}\""
}
PK �5�Z�@�:� � " 02systemd-networkd/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
[[ $mount_needs ]] && return 1
if ! dracut_module_included "systemd"; then
derror "systemd-networkd needs systemd in the initramfs"
return 1
fi
return 255
}
# called by dracut
depends() {
echo "systemd kernel-network-modules"
}
installkernel() {
return 0
}
# called by dracut
install() {
inst_multiple -o \
$systemdutildir/systemd-networkd \
$systemdutildir/systemd-networkd-wait-online \
$systemdsystemunitdir/systemd-networkd-wait-online.service \
$systemdsystemunitdir/systemd-networkd.service \
$systemdsystemunitdir/systemd-networkd.socket \
$systemdutildir/network/99-default.link \
networkctl ip
#hostnamectl timedatectl
# $systemdutildir/systemd-timesyncd \
# $systemdutildir/systemd-timedated \
# $systemdutildir/systemd-hostnamed \
# $systemdutildir/systemd-resolvd \
# $systemdutildir/systemd-resolve-host \
# $systemdsystemunitdir/systemd-resolved.service \
# $systemdsystemunitdir/systemd-hostnamed.service \
# $systemdsystemunitdir/systemd-timesyncd.service \
# $systemdsystemunitdir/systemd-timedated.service \
# $systemdsystemunitdir/time-sync.target \
# /etc/systemd/resolved.conf \
# inst_dir /var/lib/systemd/clock
grep '^systemd-network:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
grep '^systemd-network:' /etc/group >> "$initdir/etc/group"
# grep '^systemd-timesync:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
# grep '^systemd-timesync:' /etc/group >> "$initdir/etc/group"
_arch=$(uname -m)
inst_libdir_file {"tls/$_arch/",tls/,"$_arch/",}"libnss_dns.so.*" \
{"tls/$_arch/",tls/,"$_arch/",}"libnss_mdns4_minimal.so.*" \
{"tls/$_arch/",tls/,"$_arch/",}"libnss_myhostname.so.*" \
{"tls/$_arch/",tls/,"$_arch/",}"libnss_resolve.so.*"
for i in \
systemd-networkd-wait-online.service \
systemd-networkd.service \
systemd-networkd.socket
# systemd-timesyncd.service
do
systemctl -q --root "$initdir" enable "$i"
done
}
PK �5�ZBq�1L L 99squash/module-setup.shnu �[��� #!/bin/bash
check() {
require_binaries mksquashfs unsquashfs || return 1
for i in CONFIG_SQUASHFS CONFIG_BLK_DEV_LOOP CONFIG_OVERLAY_FS ; do
if ! check_kernel_config $i; then
dinfo "dracut-squash module requires kernel configuration $i (y or m)"
return 1
fi
done
return 255
}
depends() {
echo "systemd-initrd"
return 0
}
installpost() {
local _busybox
_busybox=$(find_binary busybox)
# Move everything under $initdir except $squash_dir
# itself into squash image
for i in "$initdir"/*; do
[[ "$squash_dir" == "$i"/* ]] || mv "$i" "$squash_dir"/
done
# Create mount points for squash loader
mkdir -p "$initdir"/squash/
mkdir -p "$squash_dir"/squash/
# Copy dracut spec files out side of the squash image
# so dracut rebuild and lsinitrd can work
mkdir -p "$initdir/usr/lib/dracut/"
for file in "$squash_dir"/usr/lib/dracut/*; do
[[ -f $file ]] || continue
cp "$file" "$initdir/${file#$squash_dir}"
done
# Install required modules and binaries for the squash image init script.
if [[ $_busybox ]]; then
inst "$_busybox" /usr/bin/busybox
for _i in sh echo mount modprobe mkdir switch_root grep umount; do
ln_r /usr/bin/busybox /usr/bin/$_i
done
else
DRACUT_RESOLVE_DEPS=1 inst_multiple sh mount modprobe mkdir switch_root grep umount
# libpthread workaround: pthread_cancel wants to dlopen libgcc_s.so
inst_libdir_file -o "libgcc_s.so*"
# FIPS workaround for Fedora/RHEL: libcrypto needs libssl when FIPS is enabled
[[ $DRACUT_FIPS_MODE ]] && inst_libdir_file -o "libssl.so*"
fi
hostonly="" instmods "loop" "squashfs" "overlay"
dracut_kernel_post
# Install squash image init script.
ln_r /usr/bin /bin
ln_r /usr/sbin /sbin
inst_simple "$moddir"/init-squash.sh /init
# make sure that library links are correct and up to date for squash loader
build_ld_cache
}
install() {
if [[ $DRACUT_SQUASH_POST_INST ]]; then
installpost
fi
}
PK �5�Z 99squash/.shchkdirnu �[��� PK �5�Z*���~ ~ 99squash/init-squash.shnu ȯ�� #!/bin/sh
PATH=/bin:/sbin
[ -e /proc/self/mounts ] \
|| (mkdir -p /proc && mount -t proc -o nosuid,noexec,nodev proc /proc)
grep -q '^sysfs /sys sysfs' /proc/self/mounts \
|| (mkdir -p /sys && mount -t sysfs -o nosuid,noexec,nodev sysfs /sys)
grep -q '^devtmpfs /dev devtmpfs' /proc/self/mounts \
|| (mkdir -p /dev && mount -t devtmpfs -o mode=755,noexec,nosuid,strictatime devtmpfs /dev)
grep -q '^tmpfs /run tmpfs' /proc/self/mounts \
|| (mkdir -p /run && mount -t tmpfs -o mode=755,noexec,nosuid,strictatime tmpfs /run)
# Load required modules
modprobe loop
modprobe squashfs
modprobe overlay
# Mount the squash image
mount -t ramfs ramfs /squash
mkdir -p /squash/root /squash/overlay/upper /squash/overlay/work
mount -t squashfs -o ro,loop /squash-root.img /squash/root
# Setup new root overlay
mkdir /newroot
mount -t overlay overlay -o lowerdir=/squash/root,upperdir=/squash/overlay/upper,workdir=/squash/overlay/work/ /newroot/
# Move all mount points to new root to prepare chroot
mount --move /squash /newroot/squash
# Jump to new root and clean setup files
SYSTEMD_IN_INITRD=lenient exec switch_root /newroot /init
PK �5�Z ��H 95ssh-client/module-setup.shnu ȯ�� #!/bin/bash
# fixme: assume user is root
# called by dracut
check() {
[[ $mount_needs ]] && return 1
# If our prerequisites are not met, fail.
require_binaries ssh scp || return 1
if [[ $sshkey ]]; then
[ ! -f $sshkey ] && {
derror "ssh key: $sshkey is not found!"
return 1
}
fi
return 255
}
# called by dracut
depends() {
# We depend on network modules being loaded
echo network
}
inst_sshenv()
{
if [ -d /root/.ssh ]; then
inst_dir /root/.ssh
chmod 700 ${initdir}/root/.ssh
fi
# Copy over ssh key and knowhosts if needed
[[ $sshkey ]] && {
inst_simple $sshkey
[[ -f /root/.ssh/known_hosts ]] && inst_simple /root/.ssh/known_hosts
[[ -f /etc/ssh/ssh_known_hosts ]] && inst_simple /etc/ssh/ssh_known_hosts
}
# Copy over root and system-wide ssh configs.
[[ -f /root/.ssh/config ]] && inst_simple /root/.ssh/config
if [[ -f /etc/ssh/ssh_config ]]; then
inst_simple /etc/ssh/ssh_config
sed -i -e 's/\(^[[:space:]]*\)ProxyCommand/\1# ProxyCommand/' ${initdir}/etc/ssh/ssh_config
while read key val || [ -n "$key" ]; do
if [[ $key == "GlobalKnownHostsFile" ]]; then
inst_simple "$val"
# Copy customized UserKnowHostsFile
elif [[ $key == "UserKnownHostsFile" ]]; then
# Make sure that ~/foo will be copied as /root/foo in kdump's initramfs
if str_starts "$val" "~/"; then
val="/root/${val#"~/"}"
fi
inst_simple "$val"
fi
done < /etc/ssh/ssh_config
fi
return 0
}
# called by dracut
install() {
local _nsslibs
inst_multiple ssh scp
inst_sshenv
_nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
| tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
_nsslibs=${_nsslibs#|}
_nsslibs=${_nsslibs%|}
inst_libdir_file -n "$_nsslibs" 'libnss_*.so*'
}
PK �5�ZIP�0� � 95fcoe-uefi/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
is_fcoe() {
block_is_fcoe $1 || return 1
}
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves is_fcoe || return 255
[ -d /sys/firmware/efi ] || return 255
}
require_binaries dcbtool fipvlan lldpad ip readlink || return 1
return 0
}
# called by dracut
depends() {
echo fcoe uefi-lib
return 0
}
# called by dracut
install() {
inst_hook cmdline 20 "$moddir/parse-uefifcoe.sh"
}
PK �5�Z%��~� � 95fcoe-uefi/parse-uefifcoe.shnu ȯ�� #!/bin/bash
command -v getarg >/dev/null || . /lib/dracut-lib.sh
command -v get_fcoe_boot_mac >/dev/null || . /lib/uefi-lib.sh
command -v set_ifname >/dev/null || . /lib/net-lib.sh
print_fcoe_uefi_conf()
{
local mac dev vlan
mac=$(get_fcoe_boot_mac "$1")
[ -z "$mac" ] && return 1
dev=$(set_ifname fcoe "$mac")
vlan=$(get_fcoe_boot_vlan "$1") || return 1
case "$vlan" in
"0") ;;
'')
return 1
;;
[0-9]*)
printf "%s\n" "vlan=$dev.$vlan:$dev"
dev="$dev.$vlan"
;;
*)
printf "%s\n" "vlan=$vlan:$dev"
dev="$vlan"
;;
esac
# fcoe=eth0:nodcb
printf "fcoe=%s\n" "$dev:nodcb"
return 0
}
for i in /sys/firmware/efi/vars/FcoeBootDevice-*/data; do
[ -e "$i" ] || continue
print_fcoe_uefi_conf $i > /etc/cmdline.d/40-fcoe-uefi.conf && break
done
PK �5�Z�i��& & 98usrmount/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
[[ $mount_needs ]] && return 1
return 0
}
# called by dracut
depends() {
echo 'fs-lib'
}
# called by dracut
install() {
if ! dracut_module_included "systemd"; then
inst_hook pre-pivot 50 "$moddir/mount-usr.sh"
fi
:
}
PK �5�ZϮ� 98usrmount/mount-usr.shnu ȯ�� #!/bin/sh
type info >/dev/null 2>&1 || . /lib/dracut-lib.sh
type fsck_single >/dev/null 2>&1 || . /lib/fs-lib.sh
filtersubvol() {
local _oldifs
_oldifs="$IFS"
IFS=","
set $*
IFS="$_oldifs"
while [ $# -gt 0 ]; do
case $1 in
subvol\=*) :;;
*) printf '%s' "${1}," ;;
esac
shift
done
}
fsck_usr()
{
local _dev=$1
local _fs=$2
local _fsopts=$3
local _fsckoptions
if [ -f "$NEWROOT"/fsckoptions ]; then
_fsckoptions=$(cat "$NEWROOT"/fsckoptions)
fi
if [ -f "$NEWROOT"/forcefsck ] || getargbool 0 forcefsck ; then
_fsckoptions="-f $_fsckoptions"
elif [ -f "$NEWROOT"/.autofsck ]; then
[ -f "$NEWROOT"/etc/sysconfig/autofsck ] && . "$NEWROOT"/etc/sysconfig/autofsck
if [ "$AUTOFSCK_DEF_CHECK" = "yes" ]; then
AUTOFSCK_OPT="$AUTOFSCK_OPT -f"
fi
if [ -n "$AUTOFSCK_SINGLEUSER" ]; then
warn "*** Warning -- the system did not shut down cleanly. "
warn "*** Dropping you to a shell; the system will continue"
warn "*** when you leave the shell."
emergency_shell
fi
_fsckoptions="$AUTOFSCK_OPT $_fsckoptions"
fi
fsck_single "$_dev" "$_fs" "$_fsopts" "$_fsckoptions"
}
mount_usr()
{
local _dev _mp _fs _opts _rest _usr_found _ret _freq _passno
# check, if we have to mount the /usr filesystem
while read _dev _mp _fs _opts _freq _passno || [ -n "$_dev" ]; do
[ "${_dev%%#*}" != "$_dev" ] && continue
if [ "$_mp" = "/usr" ]; then
case "$_dev" in
LABEL=*)
_dev="$(echo $_dev | sed 's,/,\\x2f,g')"
_dev="/dev/disk/by-label/${_dev#LABEL=}"
;;
UUID=*)
_dev="${_dev#block:}"
_dev="/dev/disk/by-uuid/${_dev#UUID=}"
;;
esac
if strstr "$_opts" "subvol=" && \
[ "${root#block:}" -ef $_dev ] && \
[ -n "$rflags" ]; then
# for btrfs subvolumes we have to mount /usr with the same rflags
rflags=$(filtersubvol "$rflags")
rflags=${rflags%%,}
_opts="${_opts:+${_opts},}${rflags}"
elif getargbool 0 ro; then
# if "ro" is specified, we want /usr to be mounted read-only
_opts="${_opts:+${_opts},}ro"
elif getargbool 0 rw; then
# if "rw" is specified, we want /usr to be mounted read-write
_opts="${_opts:+${_opts},}rw"
fi
echo "$_dev ${NEWROOT}${_mp} $_fs ${_opts} $_freq $_passno"
_usr_found="1"
break
fi
done < "$NEWROOT/etc/fstab" >> /etc/fstab
if [ "$_usr_found" != "" ]; then
# we have to mount /usr
_fsck_ret=0
if ! getargbool 0 rd.skipfsck; then
if [ "0" != "${_passno:-0}" ]; then
fsck_usr "$_dev" "$_fs" "$_opts"
_fsck_ret=$?
[ $_fsck_ret -ne 255 ] && echo $_fsck_ret >/run/initramfs/usr-fsck
fi
fi
info "Mounting /usr with -o $_opts"
mount "$NEWROOT/usr" 2>&1 | vinfo
if ! ismounted "$NEWROOT/usr"; then
warn "Mounting /usr to $NEWROOT/usr failed"
warn "*** Dropping you to a shell; the system will continue"
warn "*** when you leave the shell."
emergency_shell
fi
fi
}
if [ -f "$NEWROOT/etc/fstab" ]; then
mount_usr
fi
PK �5�Z�Uʤ� � 45url-lib/url-lib.shnu ȯ�� #!/bin/sh
# url-lib.sh - functions for handling URLs (file fetching etc.)
#
# Authors:
# Will Woods <wwoods@redhat.com>
type mkuniqdir >/dev/null 2>&1 || . /lib/dracut-lib.sh
# fetch_url URL [OUTFILE]
# fetch the given URL to a locally-visible location.
# if OUTFILE is given, the URL will be fetched to that filename,
# overwriting it if present.
# If the URL is something mountable (e.g. nfs://) and no OUTFILE is given,
# the server will be left mounted until pre-pivot.
# the return values are as follows:
# 0: success
# 253: unknown error (file missing)
# 254: unhandled URL scheme / protocol
# 255: bad arguments / unparseable URLs
# other: fetch command failure (whatever curl/mount/etc return)
fetch_url() {
local url="$1" outloc="$2"
local handler="$(get_url_handler $url)"
[ -n "$handler" ] || return 254
[ -n "$url" ] || return 255
"$handler" "$url" "$outloc"
}
# get_url_handler URL
# returns the first HANDLERNAME corresponding to the URL's scheme
get_url_handler() {
local scheme="${1%%:*}" item=""
for item in $url_handler_map; do
[ "$scheme" = "${item%%:*}" ] && echo "${item#*:}" && return 0
done
return 1
}
# add_url_handler HANDLERNAME SCHEME [SCHEME...]
# associate the named handler with the named scheme(s).
add_url_handler() {
local handler="$1"; shift
local schemes="$@" scheme=""
set --
for scheme in $schemes; do
[ "$(get_url_handler $scheme)" = "$handler" ] && continue
set -- "$@" "$scheme:$handler"
done
set -- $@ $url_handler_map # add new items to *front* of list
url_handler_map="$@"
}
### HTTP, HTTPS, FTP #################################################
export CURL_HOME="/run/initramfs/url-lib"
mkdir -p $CURL_HOME
curl_args="--globoff --location --retry 3 --fail --show-error"
getargbool 0 rd.noverifyssl && curl_args="$curl_args --insecure"
proxy=$(getarg proxy=)
[ -n "$proxy" ] && curl_args="$curl_args --proxy $proxy"
curl_fetch_url() {
local url="$1" outloc="$2"
echo "$url" > /proc/self/fd/0
if [ -n "$outloc" ]; then
curl $curl_args --output - -- "$url" > "$outloc" || return $?
else
local outdir="$(mkuniqdir /tmp curl_fetch_url)"
( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? )
outloc="$outdir/$(ls -A $outdir)"
fi
if ! [ -f "$outloc" ]; then
warn "Downloading '$url' failed!"
return 253
fi
if [ -z "$2" ]; then echo "$outloc" ; fi
}
add_url_handler curl_fetch_url http https ftp tftp
set_http_header() {
echo "header = \"$1: $2\"" >> $CURL_HOME/.curlrc
}
### TORRENT ##########################################################
ctorrent_args="-E 0 -e 0"
ctorrent_fetch_url() {
local url="$1" outloc="$2"
url=${url#*//}
torrent_outloc="$outloc.torrent"
echo "$url" > /proc/self/fd/0
if [ -n "$outloc" ]; then
curl $curl_args --output - -- "$url" > "$torrent_outloc" || return $?
else
local outdir="$(mkuniqdir /tmp torrent_fetch_url)"
( cd "$outdir"; curl $curl_args --remote-name "$url" || return $? )
torrent_outloc="$outdir/$(ls -A $outdir)"
outloc=${torrent_outloc%.*}
fi
if ! [ -f "$torrent_outloc" ]; then
warn "Downloading '$url' failed!"
return 253
fi
ctorrent $ctorrent_args -s $outloc $torrent_outloc >&2
if ! [ -f "$outloc" ]; then
warn "Torrent download of '$url' failed!"
return 253
fi
if [ -z "$2" ]; then echo "$outloc" ; fi
}
command -v ctorrent >/dev/null \
&& add_url_handler ctorrent_fetch_url torrent
### NFS ##############################################################
[ -e /lib/nfs-lib.sh ] && . /lib/nfs-lib.sh
nfs_already_mounted() {
local server="$1" path="$2" localdir="" s="" p=""
cat /proc/mounts | while read src mnt rest || [ -n "$src" ]; do
splitsep ":" "$src" s p
if [ "$server" = "$s" ]; then
if [ "$path" = "$p" ]; then
echo $mnt
elif str_starts "$path" "$p"; then
echo $mnt/${path#$p/}
fi
fi
done
}
nfs_fetch_url() {
local url="$1" outloc="$2" nfs="" server="" path="" options=""
nfs_to_var "$url" || return 255
local filepath="${path%/*}" filename="${path##*/}" mntdir=""
# skip mount if server:/filepath is already mounted
mntdir=$(nfs_already_mounted "$server" "$path")
if [ -z "$mntdir" ]; then
local mntdir="$(mkuniqdir /run nfs_mnt)"
mount_nfs "$nfs:$server:$filepath${options:+:$options}" "$mntdir"
# lazy unmount during pre-pivot hook
inst_hook --hook pre-pivot --name 99url-lib-umount-nfs-"$(basename "$mntdir")" umount -l -- "$mntdir"
fi
if [ -z "$outloc" ]; then
outloc="$mntdir/$filename"
else
cp -f -- "$mntdir/$filename" "$outloc" || return $?
fi
[ -f "$outloc" ] || return 253
if [ -z "$2" ]; then echo "$outloc" ; fi
}
command -v nfs_to_var >/dev/null && add_url_handler nfs_fetch_url nfs nfs4
PK �5�Z
os�� � 45url-lib/module-setup.shnu ȯ�� #!/bin/bash
# module-setup for url-lib
# called by dracut
check() {
require_binaries curl || return 1
return 255
}
# called by dracut
depends() {
echo network
return 0
}
# called by dracut
install() {
local _dir _crt _found _lib _nssckbi _p11roots _p11root _p11item
inst_simple "$moddir/url-lib.sh" "/lib/url-lib.sh"
inst_multiple -o ctorrent
inst_multiple curl
# also install libs for curl https
inst_libdir_file "libnsspem.so*"
inst_libdir_file "libnsssysinit.so*"
inst_libdir_file "libsoftokn3.so*"
inst_libdir_file "libsqlite3.so*"
for _dir in $libdirs; do
[[ -d $_dir ]] || continue
for _lib in $_dir/libcurl.so.*; do
[[ -e $_lib ]] || continue
[[ $_nssckbi ]] || _nssckbi=$(grep -F --binary-files=text -z libnssckbi $_lib)
_crt=$(grep -F --binary-files=text -z .crt $_lib)
[[ $_crt ]] || continue
[[ $_crt == /*/* ]] || continue
if ! inst "$_crt"; then
dwarn "Couldn't install '$_crt' SSL CA cert bundle; HTTPS might not work."
continue
fi
_found=1
done
done
# If we found no cert bundle files referenced in libcurl but we
# *did* find a mention of libnssckbi (checked above), install it.
# If its truly NSS libnssckbi, it includes its own trust bundle,
# but if it's really p11-kit-trust.so, we need to find the dirs
# where it will look for a trust bundle and install them too.
if ! [[ $_found ]] && [[ $_nssckbi ]] ; then
_found=1
inst_libdir_file "libnssckbi.so*" || _found=
for _dir in $libdirs; do
[[ -e $_dir/libnssckbi.so ]] || continue
# this looks for directory-ish strings in the file
for _p11roots in $(grep -o --binary-files=text "/[[:alpha:]][[:print:]]*" $_dir/libnssckbi.so) ; do
# the string can be a :-separated list of dirs
for _p11root in $(echo "$_p11roots" | tr ':' '\n') ; do
# check if it's actually a directory (there are
# several false positives in the results)
[[ -d "$_p11root" ]] || continue
# check if it has some specific subdirs that all
# p11-kit trust dirs have
[[ -d "${_p11root}/anchors" ]] || continue
[[ -d "${_p11root}/blacklist" ]] || continue
# so now we know it's really a p11-kit trust dir;
# install everything in it
for _p11item in $(find "$_p11root") ; do
if ! inst "$_p11item" ; then
dwarn "Couldn't install '$_p11item' from p11-kit trust dir '$_p11root'; HTTPS might not work."
continue
fi
done
done
done
done
fi
[[ $_found ]] || dwarn "Couldn't find SSL CA cert bundle or libnssckbi.so; HTTPS won't work."
}
PK �5�ZIp�j� � 80lvmmerge/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
# No point trying to support lvm if the binaries are missing
require_binaries lvm dd swapoff || return 1
return 255
}
# called by dracut
depends() {
echo lvm dracut-systemd systemd
return 0
}
installkernel() {
hostonly="" instmods dm-snapshot
}
# called by dracut
install() {
inst_multiple dd swapoff
inst_hook cleanup 01 "$moddir/lvmmerge.sh"
}
PK �5�Z���H- - 80lvmmerge/README.mdnu �[��� # lvmmerge - dracut module
## Preparation
- ensure that the lvm thin pool is big enough
- backup any (most likely /boot and /boot/efi) device with:
```
# mkdir /restoredev
# dev=<device>; umount $dev; dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev"); mount $dev
```
- backup the MBR
```
# dev=<device>; dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev") bs=446 count=1
# ls -l /dev/disk/by-path/virtio-pci-0000\:00\:07.0
lrwxrwxrwx. 1 root root 9 Jul 24 04:27 /dev/disk/by-path/virtio-pci-0000:00:07.0 -> ../../vda
```
- backup some partitions
```
# dev=/dev/disk/by-path/virtio-pci-0000:00:07.0
# dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev") bs=446 count=1
# umount /boot/efi
# dev=/dev/disk/by-partuuid/687177a8-86b3-4e37-a328-91d20db9563c
# dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev")
# umount /boot
# dev=/dev/disk/by-partuuid/4fdf99e9-4f28-4207-a26f-c76546824eaf
# dd if="$dev" of=/restoredev/$(systemd-escape -p "$dev")
```
Final /restoredev
```
# ls -al /restoredev/
total 1253380
drwx------. 2 root root 250 Jul 24 04:38 .
dr-xr-xr-x. 18 root root 242 Jul 24 04:32 ..
-rw-------. 1 root root 209715200 Jul 24 04:34 dev-disk-by\x2dpartuuid-4fdf99e9\x2d4f28\x2d4207\x2da26f\x2dc76546824eaf
-rw-------. 1 root root 1073741824 Jul 24 04:34 dev-disk-by\x2dpartuuid-687177a8\x2d86b3\x2d4e37\x2da328\x2d91d20db9563c
-rw-------. 1 root root 446 Jul 24 04:38 dev-disk-by\x2dpath-virtio\x2dpci\x2d0000:00:07.0
```
- make a thin snapshot
```
# lvm lvcreate -pr -s rhel/root --name reset
```
- mark the snapshot with a tag
```
# lvm lvchange --addtag reset rhel/reset
```
- remove /restoredev
```
# rm -fr /restoredev
```
## Operation
If a boot entry with ```rd.lvm.mergetags=<tag>``` is selected and there are LVs with ```<tag>```
dracut will
- make a copy of the snapshot
- merge it back to the original
- rename the copy back to the name of the snapshot
- if /restordev appears in the root, then it will restore the images
found in that directory. This can be used to restore /boot and /boot/efi and the
MBR of the boot device
PK �5�Z���0 80lvmmerge/lvmmerge.shnu ȯ�� #!/bin/bash
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
do_merge() {
sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 1/' \
/etc/lvm/lvm.conf
systemctl --no-block stop sysroot.mount
swapoff -a
umount -R /sysroot
for tag in $(getargs rd.lvm.mergetags); do
lvm vgs --noheadings -o vg_name | \
while read -r vg || [[ -n $vg ]]; do
unset LVS
declare -a LVS
lvs=$(lvm lvs --noheadings -o lv_name "$vg")
for lv in $lvs; do
lvm lvchange -an "$vg/$lv"
tags=$(trim "$(lvm lvs --noheadings -o lv_tags "$vg/$lv")")
strstr ",${tags}," ",${tag}," || continue
if ! lvm lvs --noheadings -o lv_name "${vg}/${lv}_dracutsnap" &>/dev/null; then
info "Creating backup ${lv}_dracutsnap of ${vg}/${lv}"
lvm lvcreate -pr -s "${vg}/${lv}" --name "${lv}_dracutsnap"
fi
lvm lvchange --addtag "$tag" "${vg}/${lv}_dracutsnap"
info "Merging back ${vg}/${lv} to the original LV"
lvm lvconvert --merge "${vg}/${lv}"
LVS+=($lv)
done
systemctl --no-block stop sysroot.mount
udevadm settle
for ((i=0; i < 100; i++)); do
lvm vgchange -an "$vg" && break
sleep 0.5
done
udevadm settle
lvm vgchange -ay "$vg"
udevadm settle
for lv in "${LVS[@]}"; do
info "Renaming ${lv}_dracutsnap backup to ${vg}/${lv}"
lvm lvrename "$vg" "${lv}_dracutsnap" "${lv}"
done
udevadm settle
done
done
systemctl --no-block reset-failed systemd-fsck-root
systemctl --no-block start systemd-fsck-root
systemctl --no-block reset-failed sysroot.mount
systemctl --no-block start sysroot.mount
for ((i=0; i < 100; i++)); do
[[ -d /sysroot/dev ]] && break
sleep 0.5
systemctl --no-block start sysroot.mount
done
if [[ -d /sysroot/restoredev ]]; then
(
if cd /sysroot/restoredev; then
# restore devices and partitions
for i in *; do
target=$(systemd-escape -pu "$i")
if ! [[ -b $target ]]; then
warn "Not restoring $target, as the device does not exist"
continue
fi
# Just in case
umount "$target" &> /dev/null
info "Restoring $target"
dd if="$i" of="$target" |& vinfo
done
fi
)
mount -o remount,rw /sysroot
rm -fr /sysroot/restoredev
fi
info "Rebooting"
reboot
}
if getarg rd.lvm.mergetags; then
do_merge
fi
PK �5�Z��nC/ / 95hwdb/module-setup.shnu ȯ�� #!/bin/bash
# This file is part of dracut.
# SPDX-License-Identifier: GPL-2.0-or-later
check() {
return 255
}
# called by dracut
install() {
local hwdb_bin
# systemd-hwdb ships the file in /etc, with /usr/lib as an alternative.
# Therefore consider this location as preferred for configuration.
hwdb_bin="${udevdir}"/hwdb.bin
if [[ ! -r "${hwdb_bin}" ]]; then
hwdb_bin="${udevconfdir}"/hwdb.bin
fi
if [[ $hostonly ]]; then
inst_multiple -H "${hwdb_bin}"
else
inst_multiple "${hwdb_bin}"
fi
}
PK �5�Z{��� � 00warpclock/module-setup.shnu �[��� #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
# called by dracut
check() {
# hwclock does not exist on S390(x), bail out silently then
local _arch=$(uname -m)
[ "$_arch" = "s390" -o "$_arch" = "s390x" ] && return 1
[ -e /etc/localtime -a -e /etc/adjtime ] || return 1
require_binaries /sbin/hwclock || return 1
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst /usr/share/zoneinfo/UTC
inst /etc/localtime
inst /etc/adjtime
inst_hook pre-trigger 00 "$moddir/warpclock.sh"
inst /sbin/hwclock
}
PK �5�Z���a� � 00warpclock/warpclock.shnu �[��� #!/bin/sh
if test -e /etc/adjtime ; then
while read line ; do
if test "$line" = LOCAL ; then
hwclock --systz
fi
done < /etc/adjtime
fi
PK �5�Z���� � 98pollcdrom/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_hook initqueue/settled 99 "$moddir/pollcdrom.sh"
}
PK �5�ZaW�{ { 98pollcdrom/pollcdrom.shnu ȯ�� #!/bin/sh
#
# Licensed under the GPLv2
#
# Copyright 2008-2012, Red Hat, Inc.
# Harald Hoyer <harald@redhat.com>
if [ ! -e /sys/module/block/parameters/events_dfl_poll_msecs ]; then
# if the kernel does not support autopolling
# then we have to do a
# dirty hack for some cdrom drives,
# which report no medium for quiet
# some time.
for cdrom in /sys/block/sr*; do
[ -e "$cdrom" ] || continue
# skip, if cdrom medium was already found
strstr "$(udevadm info --query=env --path=${cdrom##/sys})" \
ID_CDROM_MEDIA && continue
echo change > "$cdrom/uevent"
done
fi
PK �5�ZMښX: : 05busybox/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
require_binaries busybox || return 1
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
local _i _path _busybox
local _progs=()
_busybox=$(find_binary busybox)
inst $_busybox /usr/bin/busybox
for _i in $($_busybox --list); do
[[ ${_i} == busybox ]] && continue
_progs+=("${_i}")
done
for _i in "${_progs[@]}"; do
_path=$(find_binary "$_i")
[ -z "$_path" ] && continue
ln_r /usr/bin/busybox $_path
done
}
PK �5�Z[�H 90crypt/crypt-run-generator.shnu ȯ�� #!/bin/sh
. /lib/dracut-lib.sh
type crypttab_contains >/dev/null 2>&1 || . /lib/dracut-crypt-lib.sh
dev=$1
luks=$2
crypttab_contains "$luks" "$dev" && exit 0
allowdiscards="-"
# parse for allow-discards
if strstr "$(cryptsetup --help)" "allow-discards"; then
if discarduuids=$(getargs "rd.luks.allow-discards"); then
discarduuids=$(str_replace "$discarduuids" 'luks-' '')
if strstr " $discarduuids " " ${luks##luks-}"; then
allowdiscards="discard"
fi
elif getargbool 0 rd.luks.allow-discards; then
allowdiscards="discard"
fi
fi
echo "$luks $dev - timeout=0,$allowdiscards" >> /etc/crypttab
if command -v systemctl >/dev/null; then
systemctl daemon-reload
systemctl start cryptsetup.target
fi
exit 0
PK �5�Zx2âl l 90crypt/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
local _rootdev
# if cryptsetup is not installed, then we cannot support encrypted devices.
require_any_binary $systemdutildir/systemd-cryptsetup cryptsetup || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ $fs = "crypto_LUKS" ]] && return 0
done
return 255
}
return 0
}
# called by dracut
depends() {
echo dm rootfs-block
return 0
}
# called by dracut
installkernel() {
hostonly="" instmods drbg
arch=$(arch)
[[ $arch == x86_64 ]] && arch=x86
[[ $arch == s390x ]] && arch=s390
instmods dm_crypt =crypto =drivers/crypto =arch/$arch/crypto
}
# called by dracut
cmdline() {
local dev UUID
for dev in "${!host_fs_types[@]}"; do
[[ "${host_fs_types[$dev]}" != "crypto_LUKS" ]] && continue
UUID=$(
blkid -u crypto -o export $dev \
| while read line || [ -n "$line" ]; do
[[ ${line#UUID} = $line ]] && continue
printf "%s" "${line#UUID=}"
break
done
)
[[ ${UUID} ]] || continue
printf "%s" " rd.luks.uuid=luks-${UUID}"
done
}
# called by dracut
install() {
if [[ $hostonly_cmdline == "yes" ]]; then
local _cryptconf=$(cmdline)
[[ $_cryptconf ]] && printf "%s\n" "$_cryptconf" >> "${initdir}/etc/cmdline.d/90crypt.conf"
fi
inst_hook cmdline 30 "$moddir/parse-crypt.sh"
if ! dracut_module_included "systemd"; then
inst_multiple cryptsetup rmdir readlink umount
inst_script "$moddir"/cryptroot-ask.sh /sbin/cryptroot-ask
inst_script "$moddir"/probe-keydev.sh /sbin/probe-keydev
inst_hook cmdline 10 "$moddir/parse-keydev.sh"
inst_hook cleanup 30 "$moddir/crypt-cleanup.sh"
fi
if [[ $hostonly ]] && [[ -f /etc/crypttab ]]; then
# filter /etc/crypttab for the devices we need
while read _mapper _dev _luksfile _luksoptions || [ -n "$_mapper" ]; do
[[ $_mapper = \#* ]] && continue
[[ $_dev ]] || continue
[[ $_dev == PARTUUID=* ]] && \
_dev="/dev/disk/by-partuuid/${_dev#PARTUUID=}"
[[ $_dev == UUID=* ]] && \
_dev="/dev/disk/by-uuid/${_dev#UUID=}"
[[ $_dev == ID=* ]] && \
_dev="/dev/disk/by-id/${_dev#ID=}"
echo "$_dev $(blkid $_dev -s UUID -o value)" >> "${initdir}/etc/block_uuid.map"
# loop through the options to check for the force option
luksoptions=${_luksoptions}
OLD_IFS="${IFS}"
IFS=,
set -- ${luksoptions}
IFS="${OLD_IFS}"
while [ $# -gt 0 ]; do
case $1 in
force)
forceentry="yes"
break
;;
esac
shift
done
# include the entry regardless
if [ "${forceentry}" = "yes" ]; then
echo "$_mapper $_dev $_luksfile $_luksoptions"
else
for _hdev in "${!host_fs_types[@]}"; do
[[ ${host_fs_types[$_hdev]} == "crypto_LUKS" ]] || continue
if [[ $_hdev -ef $_dev ]] || [[ /dev/block/$_hdev -ef $_dev ]]; then
echo "$_mapper $_dev $_luksfile $_luksoptions"
break
fi
done
fi
done < /etc/crypttab > $initdir/etc/crypttab
mark_hostonly /etc/crypttab
fi
inst_simple "$moddir/crypt-lib.sh" "/lib/dracut-crypt-lib.sh"
if dracut_module_included "systemd"; then
# the cryptsetup targets are already pulled in by 00systemd, but not
# the enablement symlinks
inst_multiple -o \
$systemdutildir/system-generators/systemd-cryptsetup-generator \
$systemdutildir/systemd-cryptsetup \
$systemdsystemunitdir/systemd-ask-password-console.path \
$systemdsystemunitdir/systemd-ask-password-console.service \
$systemdsystemunitdir/cryptsetup.target \
$systemdsystemunitdir/sysinit.target.wants/cryptsetup.target \
$systemdsystemunitdir/remote-cryptsetup.target \
$systemdsystemunitdir/initrd-root-device.target.wants/remote-cryptsetup.target \
systemd-ask-password systemd-tty-ask-password-agent
inst_script "$moddir"/crypt-run-generator.sh /sbin/crypt-run-generator
fi
dracut_need_initqueue
}
PK �5�Zz!�a a 90crypt/parse-keydev.shnu ȯ�� #!/bin/sh
if getargbool 1 rd.luks -n rd_NO_LUKS && \
[ -n "$(getarg rd.luks.key)" ]; then
exec 7>/etc/udev/rules.d/65-luks-keydev.rules
echo 'SUBSYSTEM!="block", GOTO="luks_keydev_end"' >&7
echo 'ACTION!="add|change", GOTO="luks_keydev_end"' >&7
for arg in $(getargs rd.luks.key); do
unset keypath keydev luksdev
splitsep : "$arg" keypath keydev luksdev
info "rd.luks.key: keypath='$keypath' keydev='$keydev' luksdev='$luksdev'"
if [ -z "$keypath" ]; then
warn 'keypath required!'
continue
fi
# A keydev of '/' is treated as the initrd itself
if [ "/" == "$keydev" ]; then
[ -z "$luksdev" ] && luksdev='*'
echo "$luksdev:$keydev:$keypath" >> /tmp/luks.keys
continue
elif [ -n "$keydev" ]; then
udevmatch "$keydev" >&7 || {
warn 'keydev incorrect!'
continue
}
printf ', ' >&7
fi
{
printf -- 'RUN+="%s --unique --onetime ' $(command -v initqueue)
printf -- '--name probe-keydev-%%k '
printf -- '%s /dev/%%k %s %s"\n' \
$(command -v probe-keydev) "${keypath}" "${luksdev}"
} >&7
done
unset arg keypath keydev luksdev
echo 'LABEL="luks_keydev_end"' >&7
exec 7>&-
fi
PK �5�ZD���~ ~ 90crypt/probe-keydev.shnu ȯ�� #!/bin/sh
. /lib/dracut-crypt-lib.sh
real_keydev="$1"; keypath="$2"; luksdev="$3"
[ -z "$real_keydev" -o -z "$keypath" ] && die 'probe-keydev: wrong usage!'
[ -z "$luksdev" ] && luksdev='*'
info "Probing $real_keydev for $keypath..."
test_dev -f "$real_keydev" "$keypath" || exit 1
info "Found $keypath on $real_keydev"
echo "$luksdev:$real_keydev:$keypath" >> /tmp/luks.keys
PK �5�ZQD.1 90crypt/cryptroot-ask.shnu ȯ�� #!/bin/sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
NEWROOT=${NEWROOT:-"/sysroot"}
# do not ask, if we already have root
[ -f $NEWROOT/proc ] && exit 0
. /lib/dracut-lib.sh
# if device name is /dev/dm-X, convert to /dev/mapper/name
if [ "${1##/dev/dm-}" != "$1" ]; then
device="/dev/mapper/$(dmsetup info -c --noheadings -o name "$1")"
else
device="$1"
fi
# default luksname - luks-UUID
luksname=$2
# number of tries
numtries=${3:-10}
# TODO: improve to support what cmdline does
if [ -f /etc/crypttab ] && getargbool 1 rd.luks.crypttab -d -n rd_NO_CRYPTTAB; then
while read name dev luksfile luksoptions || [ -n "$name" ]; do
# ignore blank lines and comments
if [ -z "$name" -o "${name#\#}" != "$name" ]; then
continue
fi
# PARTUUID used in crypttab
if [ "${dev%%=*}" = "PARTUUID" ]; then
if [ "luks-${dev##PARTUUID=}" = "$luksname" ]; then
luksname="$name"
break
fi
# UUID used in crypttab
elif [ "${dev%%=*}" = "UUID" ]; then
if [ "luks-${dev##UUID=}" = "$luksname" ]; then
luksname="$name"
break
fi
# ID used in crypttab
elif [ "${dev%%=*}" = "ID" ]; then
if [ "luks-${dev##ID=}" = "$luksname" ]; then
luksname="$name"
break
fi
# path used in crypttab
else
cdev=$(readlink -f $dev)
mdev=$(readlink -f $device)
if [ "$cdev" = "$mdev" ]; then
luksname="$name"
break
fi
fi
done < /etc/crypttab
unset name dev
fi
# check if destination already exists
[ -b /dev/mapper/$luksname ] && exit 0
# we already asked for this device
asked_file=/tmp/cryptroot-asked-$luksname
[ -f $asked_file ] && exit 0
# load dm_crypt if it is not already loaded
[ -d /sys/module/dm_crypt ] || modprobe dm_crypt
. /lib/dracut-crypt-lib.sh
#
# Open LUKS device
#
info "luksOpen $device $luksname $luksfile $luksoptions"
OLD_IFS="$IFS"
IFS=,
set -- $luksoptions
IFS="$OLD_IFS"
while [ $# -gt 0 ]; do
case $1 in
noauto)
# skip this
exit 0
;;
swap)
# skip this
exit 0
;;
tmp)
# skip this
exit 0
;;
allow-discards)
allowdiscards="--allow-discards"
;;
header=*)
cryptsetupopts="${cryptsetupopts} --${1}"
;;
esac
shift
done
# parse for allow-discards
if strstr "$(cryptsetup --help)" "allow-discards"; then
if discarduuids=$(getargs "rd.luks.allow-discards"); then
discarduuids=$(str_replace "$discarduuids" 'luks-' '')
if strstr " $discarduuids " " ${luksdev##luks-}"; then
allowdiscards="--allow-discards"
fi
elif getargbool 0 rd.luks.allow-discards; then
allowdiscards="--allow-discards"
fi
fi
if strstr "$(cryptsetup --help)" "allow-discards"; then
cryptsetupopts="$cryptsetupopts $allowdiscards"
fi
unset allowdiscards
# fallback to passphrase
ask_passphrase=1
if [ -n "$luksfile" -a "$luksfile" != "none" -a -e "$luksfile" ]; then
if cryptsetup --key-file "$luksfile" $cryptsetupopts luksOpen "$device" "$luksname"; then
ask_passphrase=0
fi
else
while [ -n "$(getarg rd.luks.key)" ]; do
if tmp=$(getkey /tmp/luks.keys $device); then
keydev="${tmp%%:*}"
keypath="${tmp#*:}"
else
if [ $numtries -eq 0 ]; then
warn "No key found for $device. Fallback to passphrase mode."
break
fi
sleep 1
info "No key found for $device. Will try $numtries time(s) more later."
initqueue --unique --onetime --settled \
--name cryptroot-ask-$luksname \
$(command -v cryptroot-ask) "$device" "$luksname" "$(($numtries-1))"
exit 0
fi
unset tmp
info "Using '$keypath' on '$keydev'"
readkey "$keypath" "$keydev" "$device" \
| cryptsetup -d - $cryptsetupopts luksOpen "$device" "$luksname"
unset keypath keydev
ask_passphrase=0
break
done
fi
if [ $ask_passphrase -ne 0 ]; then
luks_open="$(command -v cryptsetup) $cryptsetupopts luksOpen"
_timeout=$(getargs "rd.luks.timeout")
_timeout=${_timeout:-0}
ask_for_password --ply-tries 5 \
--ply-cmd "$luks_open -T1 $device $luksname" \
--ply-prompt "Password ($device)" \
--tty-tries 1 \
--tty-cmd "$luks_open -T5 -t $_timeout $device $luksname"
unset luks_open
unset _timeout
fi
unset device luksname luksfile
# mark device as asked
>> $asked_file
need_shutdown
udevsettle
exit 0
PK �5�Zۻ��� � 90crypt/crypt-lib.shnu ȯ�� #!/bin/sh
command -v getarg >/dev/null || . /lib/dracut-lib.sh
# check if the crypttab contains an entry for a LUKS UUID
crypttab_contains() {
local luks="$1"
local dev="$2"
local l d rest
if [ -f /etc/crypttab ]; then
while read l d rest || [ -n "$l" ]; do
strstr "${l##luks-}" "${luks##luks-}" && return 0
strstr "$d" "${luks##luks-}" && return 0
if [ -n "$dev" ]; then
for _dev in $(devnames $d); do
[ "$dev" -ef "$_dev" ] && return 0
done
fi
if [ -e /etc/block_uuid.map ]; then
# search for line starting with $d
_line=$(sed -n "\,^$d .*$,{p}" /etc/block_uuid.map)
[ -z "$_line" ] && continue
# get second column with uuid
_uuid="$(echo $_line | sed 's,^.* \(.*$\),\1,')"
strstr "$_uuid" "${luks##luks-}" && return 0
fi
done < /etc/crypttab
fi
return 1
}
# ask_for_password
#
# Wraps around plymouth ask-for-password and adds fallback to tty password ask
# if plymouth is not present.
#
# --cmd command
# Command to execute. Required.
# --prompt prompt
# Password prompt. Note that function already adds ':' at the end.
# Recommended.
# --tries n
# How many times repeat command on its failure. Default is 3.
# --ply-[cmd|prompt|tries]
# Command/prompt/tries specific for plymouth password ask only.
# --tty-[cmd|prompt|tries]
# Command/prompt/tries specific for tty password ask only.
# --tty-echo-off
# Turn off input echo before tty command is executed and turn on after.
# It's useful when password is read from stdin.
ask_for_password() {
local cmd; local prompt; local tries=3
local ply_cmd; local ply_prompt; local ply_tries=3
local tty_cmd; local tty_prompt; local tty_tries=3
local ret
while [ $# -gt 0 ]; do
case "$1" in
--cmd) ply_cmd="$2"; tty_cmd="$2"; shift;;
--ply-cmd) ply_cmd="$2"; shift;;
--tty-cmd) tty_cmd="$2"; shift;;
--prompt) ply_prompt="$2"; tty_prompt="$2"; shift;;
--ply-prompt) ply_prompt="$2"; shift;;
--tty-prompt) tty_prompt="$2"; shift;;
--tries) ply_tries="$2"; tty_tries="$2"; shift;;
--ply-tries) ply_tries="$2"; shift;;
--tty-tries) tty_tries="$2"; shift;;
--tty-echo-off) tty_echo_off=yes;;
esac
shift
done
{ flock -s 9;
# Prompt for password with plymouth, if installed and running.
if type plymouth >/dev/null 2>&1 && plymouth --ping 2>/dev/null; then
plymouth ask-for-password \
--prompt "$ply_prompt" --number-of-tries=$ply_tries \
--command="$ply_cmd"
ret=$?
else
if [ "$tty_echo_off" = yes ]; then
stty_orig="$(stty -g)"
stty -echo
fi
local i=1
while [ $i -le $tty_tries ]; do
[ -n "$tty_prompt" ] && \
printf "$tty_prompt [$i/$tty_tries]:" >&2
eval "$tty_cmd" && ret=0 && break
ret=$?
i=$(($i+1))
[ -n "$tty_prompt" ] && printf '\n' >&2
done
[ "$tty_echo_off" = yes ] && stty $stty_orig
fi
} 9>/.console_lock
[ $ret -ne 0 ] && echo "Wrong password" >&2
return $ret
}
# Try to mount specified device (by path, by UUID or by label) and check
# the path with 'test'.
#
# example:
# test_dev -f LABEL="nice label" /some/file1
test_dev() {
local test_op=$1; local dev="$2"; local f="$3"
local ret=1; local mount_point=$(mkuniqdir /mnt testdev)
local path
[ -n "$dev" -a -n "$*" ] || return 1
[ -d "$mount_point" ] || die 'Mount point does not exist!'
if mount -r "$dev" "$mount_point" >/dev/null 2>&1; then
test $test_op "${mount_point}/${f}"
ret=$?
umount "$mount_point"
fi
rmdir "$mount_point"
return $ret
}
# match_dev devpattern dev
#
# Returns true if 'dev' matches 'devpattern'. Both 'devpattern' and 'dev' are
# expanded to kernel names and then compared. If name of 'dev' is on list of
# names of devices matching 'devpattern', the test is positive. 'dev' and
# 'devpattern' may be anything which function 'devnames' recognizes.
#
# If 'devpattern' is empty or '*' then function just returns true.
#
# Example:
# match_dev UUID=123 /dev/dm-1
# Returns true if /dev/dm-1 UUID starts with "123".
match_dev() {
[ -z "$1" -o "$1" = '*' ] && return 0
local devlist; local dev
devlist="$(devnames "$1")" || return 255
dev="$(devnames "$2")" || return 255
strstr "
$devlist
" "
$dev
"
}
# getkey keysfile for_dev
#
# Reads file <keysfile> produced by probe-keydev and looks for first line to
# which device <for_dev> matches. The successful result is printed in format
# "<keydev>:<keypath>". When nothing found, just false is returned.
#
# Example:
# getkey /tmp/luks.keys /dev/sdb1
# May print:
# /dev/sdc1:/keys/some.key
getkey() {
local keys_file="$1"; local for_dev="$2"
local luks_dev; local key_dev; local key_path
[ -z "$keys_file" -o -z "$for_dev" ] && die 'getkey: wrong usage!'
[ -f "$keys_file" ] || return 1
local IFS=:
while read luks_dev key_dev key_path || [ -n "$luks_dev" ]; do
if match_dev "$luks_dev" "$for_dev"; then
echo "${key_dev}:${key_path}"
return 0
fi
done < "$keys_file"
return 1
}
# readkey keypath keydev device
#
# Mounts <keydev>, reads key from file <keypath>, optionally processes it (e.g.
# if encrypted with GPG) and prints to standard output which is supposed to be
# read by cryptsetup. <device> is just passed to helper function for
# informational purpose.
readkey() {
local keypath="$1"
local keydev="$2"
local device="$3"
# No mounting needed if the keyfile resides inside the initrd
if [ "/" == "$keydev" ]; then
local mntp=/
else
# This creates a unique single mountpoint for *, or several for explicitly
# given LUKS devices. It accomplishes unlocking multiple LUKS devices with
# a single password entry.
local mntp="/mnt/$(str_replace "keydev-$keydev-$keypath" '/' '-')"
if [ ! -d "$mntp" ]; then
mkdir "$mntp"
mount -r "$keydev" "$mntp" || die 'Mounting rem. dev. failed!'
fi
fi
case "${keypath##*.}" in
gpg)
if [ -f /lib/dracut-crypt-gpg-lib.sh ]; then
. /lib/dracut-crypt-gpg-lib.sh
gpg_decrypt "$mntp" "$keypath" "$keydev" "$device"
else
die "No GPG support to decrypt '$keypath' on '$keydev'."
fi
;;
img)
if [ -f /lib/dracut-crypt-loop-lib.sh ]; then
. /lib/dracut-crypt-loop-lib.sh
loop_decrypt "$mntp" "$keypath" "$keydev" "$device"
printf "%s\n" "umount \"$mntp\"; rmdir \"$mntp\";" > ${hookdir}/cleanup/"crypt-loop-cleanup-99-${mntp##*/}".sh
return 0
else
die "No loop file support to decrypt '$keypath' on '$keydev'."
fi
;;
*) cat "$mntp/$keypath" ;;
esac
# No unmounting if the keyfile resides inside the initrd
if [ "/" != "$keydev" ]; then
# General unmounting mechanism, modules doing custom cleanup should return earlier
# and install a pre-pivot cleanup hook
umount "$mntp"
rmdir "$mntp"
fi
}
PK �5�Zl) � � 90crypt/crypt-cleanup.shnu ȯ�� #!/bin/sh
# close everything which is not busy
rm -f -- /etc/udev/rules.d/70-luks.rules >/dev/null 2>&1
if ! getarg rd.luks.uuid -d rd_LUKS_UUID >/dev/null 2>&1 && getargbool 1 rd.luks -d -n rd_NO_LUKS >/dev/null 2>&1; then
while true; do
local do_break="y"
for i in /dev/mapper/luks-*; do
cryptsetup luksClose $i >/dev/null 2>&1 && do_break=n
done
[ "$do_break" = "y" ] && break
done
fi
PK �5�Z����� � 90crypt/parse-crypt.shnu ȯ�� #!/bin/sh
type crypttab_contains >/dev/null 2>&1 || . /lib/dracut-crypt-lib.sh
_cryptgetargsname() {
debug_off
local _o _found _key
unset _o
unset _found
CMDLINE=$(getcmdline)
_key="$1"
set --
for _o in $CMDLINE; do
if [ "$_o" = "$_key" ]; then
_found=1;
elif [ "${_o%=*}" = "${_key%=}" ]; then
[ -n "${_o%=*}" ] && set -- "$@" "${_o#*=}";
_found=1;
fi
done
if [ -n "$_found" ]; then
[ $# -gt 0 ] && printf '%s' "$*"
return 0
fi
return 1;
}
if ! getargbool 1 rd.luks -d -n rd_NO_LUKS; then
info "rd.luks=0: removing cryptoluks activation"
rm -f -- /etc/udev/rules.d/70-luks.rules
else
{
echo 'SUBSYSTEM!="block", GOTO="luks_end"'
echo 'ACTION!="add|change", GOTO="luks_end"'
} > /etc/udev/rules.d/70-luks.rules.new
PARTUUID=$(getargs rd.luks.partuuid -d rd_LUKS_PARTUUID)
SERIAL=$(getargs rd.luks.serial -d rd_LUKS_SERIAL)
LUKS=$(getargs rd.luks.uuid -d rd_LUKS_UUID)
tout=$(getarg rd.luks.key.tout)
if [ -e /etc/crypttab ]; then
while read -r _ _dev _ || [ -n "$_dev" ]; do
set_systemd_timeout_for_dev "$_dev"
done < /etc/crypttab
fi
if [ -n "$PARTUUID" ]; then
for uuid in $PARTUUID; do
uuid=${uuid##luks-}
if luksname=$(_cryptgetargsname "rd.luks.name=$uuid="); then
luksname="${luksname#$uuid=}"
else
luksname="luks-$uuid"
fi
if [ -z "$DRACUT_SYSTEMD" ]; then
{
printf -- 'ENV{ID_PART_ENTRY_UUID}=="*%s*", ' "$uuid"
printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)"
printf -- '--name cryptroot-ask-%%k %s ' "$(command -v cryptroot-ask)"
printf -- '$env{DEVNAME} %s %s"\n' "$luksname" "$tout"
} >> /etc/udev/rules.d/70-luks.rules.new
else
luksname=$(dev_unit_name "$luksname")
luksname="$(str_replace "$luksname" '\' '\\')"
if ! crypttab_contains "$uuid"; then
{
printf -- 'ENV{ID_PART_ENTRY_UUID}=="*%s*", ' "$uuid"
printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)"
printf -- '--name systemd-cryptsetup-%%k %s start ' "$(command -v systemctl)"
printf -- 'systemd-cryptsetup@%s.service"\n' "$luksname"
} >> /etc/udev/rules.d/70-luks.rules.new
fi
fi
done
elif [ -n "$SERIAL" ]; then
for serialid in $SERIAL; do
serialid=${serialid##luks-}
if luksname=$(_cryptgetargsname "rd.luks.name=$serialid="); then
luksname="${luksname#$serialid=}"
else
luksname="luks-$serialid"
fi
if [ -z "$DRACUT_SYSTEMD" ]; then
{
printf -- 'ENV{ID_SERIAL_SHORT}=="*%s*", ' "$serialid"
printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)"
printf -- '--name cryptroot-ask-%%k %s ' "$(command -v cryptroot-ask)"
printf -- '$env{DEVNAME} %s %s"\n' "$luksname" "$tout"
} >> /etc/udev/rules.d/70-luks.rules.new
else
luksname=$(dev_unit_name "$luksname")
luksname="$(str_replace "$luksname" '\' '\\')"
if ! crypttab_contains "$serialid"; then
{
printf -- 'ENV{ID_SERIAL_SHORT}=="*%s*", ' "$serialid"
printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)"
printf -- '--name systemd-cryptsetup-%%k %s start ' "$(command -v systemctl)"
printf -- 'systemd-cryptsetup@%s.service"\n' "$luksname"
} >> /etc/udev/rules.d/70-luks.rules.new
fi
fi
done
elif [ -n "$LUKS" ]; then
for luksid in $LUKS; do
luksid=${luksid##luks-}
if luksname=$(_cryptgetargsname "rd.luks.name=$luksid="); then
luksname="${luksname#$luksid=}"
else
luksname="luks-$luksid"
fi
if [ -z "$DRACUT_SYSTEMD" ]; then
{
printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", '
printf -- 'ENV{ID_FS_UUID}=="*%s*", ' "$luksid"
printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)"
printf -- '--name cryptroot-ask-%%k %s ' "$(command -v cryptroot-ask)"
printf -- '$env{DEVNAME} %s %s"\n' "$luksname" "$tout"
} >> /etc/udev/rules.d/70-luks.rules.new
else
luksname=$(dev_unit_name "$luksname")
luksname="$(str_replace "$luksname" '\' '\\')"
if ! crypttab_contains "$luksid"; then
{
printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", '
printf -- 'ENV{ID_FS_UUID}=="*%s*", ' "$luksid"
printf -- 'RUN+="%s --settled --unique --onetime ' "$(command -v initqueue)"
printf -- '--name systemd-cryptsetup-%%k %s start ' "$(command -v systemctl)"
printf -- 'systemd-cryptsetup@%s.service"\n' "$luksname"
} >> /etc/udev/rules.d/70-luks.rules.new
fi
fi
uuid=$luksid
while [ "$uuid" != "${uuid#*-}" ]; do uuid=${uuid%%-*}${uuid#*-}; done
printf -- '[ -e /dev/disk/by-id/dm-uuid-CRYPT-LUKS?-*%s*-* ] || exit 1\n' $uuid \
>> "$hookdir/initqueue/finished/90-crypt.sh"
{
printf -- '[ -e /dev/disk/by-uuid/*%s* ] || ' $luksid
printf -- 'warn "crypto LUKS UUID "%s" not found"\n' $luksid
} >> "$hookdir/emergency/90-crypt.sh"
done
elif getargbool 0 rd.auto; then
if [ -z "$DRACUT_SYSTEMD" ]; then
{
printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", RUN+="%s ' "$(command -v initqueue)"
printf -- '--unique --settled --onetime --name cryptroot-ask-%%k '
printf -- '%s $env{DEVNAME} luks-$env{ID_FS_UUID} %s"\n' "$(command -v cryptroot-ask)" "$tout"
} >> /etc/udev/rules.d/70-luks.rules.new
else
{
printf -- 'ENV{ID_FS_TYPE}=="crypto_LUKS", RUN+="%s ' "$(command -v initqueue)"
printf -- '--unique --settled --onetime --name crypt-run-generator-%%k '
printf -- '%s $env{DEVNAME} luks-$env{ID_FS_UUID}"\n' "$(command -v crypt-run-generator)"
} >> /etc/udev/rules.d/70-luks.rules.new
fi
fi
echo 'LABEL="luks_end"' >> /etc/udev/rules.d/70-luks.rules.new
mv /etc/udev/rules.d/70-luks.rules.new /etc/udev/rules.d/70-luks.rules
fi
PK �5�Z��,� � " 04watchdog-modules/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
return 0
}
installkernel() {
local -A _drivers
local _alldrivers _wdtdrv _wdtppath _dir
[[ -d /sys/class/watchdog/ ]] || return
for _dir in /sys/class/watchdog/*; do
[[ -d "$_dir" ]] || continue
[[ -f "$_dir/state" ]] || continue
# device/modalias will return driver of this device
_wdtdrv=$(< "$_dir/device/modalias")
# There can be more than one module represented by same
# modalias. Currently load all of them.
# TODO: Need to find a way to avoid any unwanted module
# represented by modalias
_wdtdrv=$(modprobe --set-version "$kernel" -R $_wdtdrv 2>/dev/null)
if [[ $_wdtdrv ]]; then
instmods $_wdtdrv
for i in $_wdtdrv; do
_drivers[$i]=1
done
fi
# however in some cases, we also need to check that if there is
# a specific driver for the parent bus/device. In such cases
# we also need to enable driver for parent bus/device.
_wdtppath=$(readlink -f "$_dir/device")
while [[ -d "$_wdtppath" ]] && [[ "$_wdtppath" != "/sys" ]]; do
_wdtppath=$(readlink -f "$_wdtppath/..")
[[ -f "$_wdtppath/modalias" ]] || continue
_wdtdrv=$(< "$_wdtppath/modalias")
_wdtdrv=$(modprobe --set-version "$kernel" -R $_wdtdrv 2>/dev/null)
if [[ $_wdtdrv ]]; then
instmods $_wdtdrv
for i in $_wdtdrv; do
_drivers[$i]=1
done
fi
done
done
# ensure that watchdog module is loaded as early as possible
_alldrivers="${!_drivers[*]}"
[[ $_alldrivers ]] && echo "rd.driver.pre=${_alldrivers// /,}" > ${initdir}/etc/cmdline.d/00-watchdog.conf
return 0
}
PK �5�Zʬ�u
u
40network/netroot.shnu ȯ�� #!/bin/sh
PATH=/usr/sbin:/usr/bin:/sbin:/bin
command -v getarg >/dev/null || . /lib/dracut-lib.sh
command -v setup_net >/dev/null || . /lib/net-lib.sh
# Huh? Empty $1?
[ -z "$1" ] && exit 1
# [ ! -z $2 ] means this is for manually bringing up network
# instead of real netroot; If It's called without $2, then there's
# no sense in doing something if no (net)root info is available
# or root is already there
[ -d $NEWROOT/proc ] && exit 0
if [ -z "$netroot" ]; then
netroot=$(getarg netroot=)
fi
[ -z "$netroot" ] && exit 1
# Set or override primary interface
netif=$1
[ -e "/tmp/net.bootdev" ] && read netif < /tmp/net.bootdev
case "$netif" in
??:??:??:??:??:??) # MAC address
for i in /sys/class/net/*/address; do
mac=$(cat $i)
if [ "$mac" = "$netif" ]; then
i=${i%/address}
netif=${i##*/}
break
fi
done
esac
# Figure out the handler for root=dhcp by recalling all netroot cmdline
# handlers when this is not called from manually network bringing up.
if [ -z "$2" ]; then
if getarg "root=dhcp" || getarg "netroot=dhcp" || getarg "root=dhcp6" || getarg "netroot=dhcp6"; then
# Load dhcp options
[ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
# If we have a specific bootdev with no dhcpoptions or empty root-path,
# we die. Otherwise we just warn
if [ -z "$new_root_path" ] ; then
[ -n "$BOOTDEV" ] && die "No dhcp root-path received for '$BOOTDEV'"
warn "No dhcp root-path received for '$netif' trying other interfaces if available"
exit 1
fi
rm -f -- $hookdir/initqueue/finished/dhcp.sh
# Set netroot to new_root_path, so cmdline parsers don't call
netroot=$new_root_path
# FIXME!
unset rootok
for f in $hookdir/cmdline/90*.sh; do
[ -f "$f" ] && . "$f";
done
else
rootok="1"
fi
# Check: do we really know how to handle (net)root?
[ -z "$root" ] && die "No or empty root= argument"
[ -z "$rootok" ] && die "Don't know how to handle 'root=$root'"
handler=${netroot%%:*}
handler=${handler%%4}
handler=$(command -v ${handler}root)
if [ -z "$netroot" ] || [ ! -e "$handler" ] ; then
die "No handler for netroot type '$netroot'"
fi
fi
# Source netroot hooks before we start the handler
source_hook netroot $netif
# Run the handler; don't store the root, it may change from device to device
# XXX other variables to export?
[ -n "$handler" ] && "$handler" "$netif" "$netroot" "$NEWROOT"
save_netinfo $netif
exit 0
PK �5�Z_S�U� � 40network/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
echo -n "kernel-network-modules "
if ! dracut_module_included "network-legacy" && [ -x "/usr/libexec/nm-initrd-generator" ] ; then
echo "network-manager"
else
echo "network-legacy"
fi
return 0
}
# called by dracut
installkernel() {
return 0
}
# called by dracut
install() {
local _arch _i _dir
inst_script "$moddir/netroot.sh" "/sbin/netroot"
inst_simple "$moddir/net-lib.sh" "/lib/net-lib.sh"
inst_hook pre-udev 50 "$moddir/ifname-genrules.sh"
inst_hook cmdline 91 "$moddir/dhcp-root.sh"
dracut_need_initqueue
}
PK �5�Z�T]d ]d 40network/net-lib.shnu ȯ�� #!/bin/sh
is_ip() {
echo "$1" | {
IFS=. read a b c d
test "$a" -ge 0 -a "$a" -le 255 \
-a "$b" -ge 0 -a "$b" -le 255 \
-a "$c" -ge 0 -a "$c" -le 255 \
-a "$d" -ge 0 -a "$d" -le 255 \
2> /dev/null
} && return 0
return 1
}
get_ip() {
local iface="$1" ip=""
ip=$(ip -o -f inet addr show $iface)
ip=${ip%%/*}
ip=${ip##* }
echo $ip
}
iface_for_remote_addr() {
set -- $(ip -o route get to $1)
echo $5
}
iface_for_ip() {
set -- $(ip -o addr show to $1)
echo $2
}
iface_for_mac() {
local interface="" mac="$(echo $1 | sed 'y/ABCDEF/abcdef/')"
for interface in /sys/class/net/*; do
if [ $(cat $interface/address) = "$mac" ]; then
echo ${interface##*/}
fi
done
}
# get the iface name for the given identifier - either a MAC, IP, or iface name
iface_name() {
case $1 in
??:??:??:??:??:??|??-??-??-??-??-??) iface_for_mac $1 ;;
*:*:*|*.*.*.*) iface_for_ip $1 ;;
*) echo $1 ;;
esac
}
# list the configured interfaces
configured_ifaces() {
local IFACES="" iface_id="" rv=1
[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
if { pidof udevd || pidof systemd-udevd; } > /dev/null; then
for iface_id in $IFACES; do
echo $(iface_name $iface_id)
rv=0
done
else
warn "configured_ifaces called before udev is running"
echo $IFACES
[ -n "$IFACES" ] && rv=0
fi
return $rv
}
all_ifaces_up() {
local iface="" IFACES=""
[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
for iface in $IFACES; do
[ -e /tmp/net.$iface.up ] || return 1
done
}
all_ifaces_setup() {
local iface="" IFACES=""
[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
for iface in $IFACES; do
[ -e /tmp/net.$iface.did-setup ] || return 1
done
}
get_netroot_ip() {
local prefix="" server="" rest=""
splitsep "$1" ":" prefix server rest
case $server in
[0-9]*\.[0-9]*\.[0-9]*\.[0-9]*) echo "$server"; return 0 ;;
esac
return 1
}
ip_is_local() {
strstr "$(ip route get $1 2>/dev/null)" " via "
}
ifdown() {
local netif="$1"
# ip down/flush ensures that routing info goes away as well
ip link set $netif down
ip addr flush dev $netif
echo "#empty" > /etc/resolv.conf
rm -f -- /tmp/net.$netif.did-setup
[ -z "$DO_VLAN" ] && \
[ -e /sys/class/net/$netif/address ] && \
rm -f -- /tmp/net.$(cat /sys/class/net/$netif/address).did-setup
# TODO: send "offline" uevent?
}
setup_net() {
local netif="$1" f="" gw_ip="" netroot_ip="" iface="" IFACES=""
local _p
[ -e /tmp/net.$netif.did-setup ] && return
[ -z "$DO_VLAN" ] && \
[ -e /sys/class/net/$netif/address ] && \
[ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && return
[ -e "/tmp/net.ifaces" ] && read IFACES < /tmp/net.ifaces
[ -z "$IFACES" ] && IFACES="$netif"
# run the scripts written by ifup
[ -e /tmp/net.$netif.hostname ] && . /tmp/net.$netif.hostname
[ -e /tmp/net.$netif.override ] && . /tmp/net.$netif.override
[ -e /tmp/dhclient.$netif.dhcpopts ] && . /tmp/dhclient.$netif.dhcpopts
# set up resolv.conf
[ -e /tmp/net.$netif.resolv.conf ] && \
awk '!array[$0]++' /tmp/net.$netif.resolv.conf > /etc/resolv.conf
[ -e /tmp/net.$netif.gw ] && . /tmp/net.$netif.gw
# add static route
for _p in $(getargs rd.route); do
route_to_var "$_p" || continue
[ -n "$route_dev" ] && [ "$route_dev" != "$netif" ] && continue
ip route add "$route_mask" ${route_gw:+via "$route_gw"} ${route_dev:+dev "$route_dev"}
if strstr "$route_mask" ":"; then
printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
> /tmp/net.route6."$netif"
else
printf -- "%s\n" "$route_mask ${route_gw:+via $route_gw} ${route_dev:+dev $route_dev}" \
> /tmp/net.route."$netif"
fi
done
# If a static route was necessary to reach the gateway, the
# first gateway setup call will have failed with
# RTNETLINK answers: Network is unreachable
# Replace the default route again after static routes to cover
# this scenario.
[ -e /tmp/net.$netif.gw ] && . /tmp/net.$netif.gw
# Handle STP Timeout: arping the default gateway.
# (or the root server, if a) it's local or b) there's no gateway.)
# Note: This assumes that if no router is present the
# root server is on the same subnet.
# Get DHCP-provided router IP, or the cmdline-provided "gw=" argument
[ -n "$new_routers" ] && gw_ip=${new_routers%%,*}
[ -n "$gw" ] && gw_ip=$gw
# Get the "netroot" IP (if there's an IP address in there)
netroot_ip=$(get_netroot_ip $netroot)
# try netroot if it's local (or there's no gateway)
if ip_is_local $netroot_ip || [ -z "$gw_ip" ]; then
dest="$netroot_ip"
else
dest="$gw_ip"
fi
unset layer2
if [ -f /sys/class/net/$netif/device/layer2 ]; then
read layer2 < /sys/class/net/$netif/device/layer2
fi
if [ "$layer2" != "0" ] && [ -n "$dest" ] && ! strstr "$dest" ":"; then
if command -v arping2 >/dev/null; then
arping2 -q -C 1 -c 60 -I $netif $dest || info "Resolving $dest via ARP on $netif failed"
else
arping -q -f -w 60 -I $netif $dest || info "Resolving $dest via ARP on $netif failed"
fi
fi
unset layer2
> /tmp/net.$netif.did-setup
[ -z "$DO_VLAN" ] && \
[ -e /sys/class/net/$netif/address ] && \
> /tmp/net.$(cat /sys/class/net/$netif/address).did-setup
}
save_netinfo() {
local netif="$1" IFACES="" f="" i=""
[ -e /tmp/net.ifaces ] && read IFACES < /tmp/net.ifaces
# Add $netif to the front of IFACES (if it's not there already).
set -- "$netif"
for i in $IFACES; do [ "$i" != "$netif" ] && set -- "$@" "$i"; done
IFACES="$*"
for i in $IFACES; do
for f in /tmp/dhclient.$i.*; do
[ -f $f ] && cp -f $f /tmp/net.${f#/tmp/dhclient.}
done
done
echo $IFACES > /tmp/.net.ifaces.new
mv /tmp/.net.ifaces.new /tmp/net.ifaces
}
set_ifname() {
local name="$1" mac="$2" num=-1 n=""
# if it's already set, return the existing name
for n in $(getargs ifname=); do
strstr "$n" "$mac" && echo ${n%%:*} && return
done
# otherwise, pick a new name and use that
while :; do
num=$(($num+1));
[ -e /sys/class/net/$name$num ] && continue
for n in $(getargs ifname=); do
[ "$name$num" = "${n%%:*}" ] && continue 2
done
break
done
echo "ifname=$name$num:$mac" >> /etc/cmdline.d/45-ifname.conf
echo "$name$num"
}
# pxelinux provides macaddr '-' separated, but we need ':'
fix_bootif() {
local macaddr=${1}
local IFS='-'
macaddr=$(printf '%s:' ${macaddr})
macaddr=${macaddr%:}
# strip hardware type field from pxelinux
[ -n "${macaddr%??:??:??:??:??:??}" ] && macaddr=${macaddr#??:}
# return macaddr with lowercase alpha characters expected by udev
echo $macaddr | sed 'y/ABCDEF/abcdef/'
}
ibft_to_cmdline() {
local iface=""
modprobe -q iscsi_ibft
(
for iface in /sys/firmware/ibft/ethernet*; do
local mac="" dev=""
local dhcp="" ip="" gw="" mask="" hostname=""
local dns1 dns2
[ -e ${iface}/mac ] || continue
mac=$(read a < ${iface}/mac; echo $a)
[ -z "$mac" ] && continue
dev=$(set_ifname ibft $mac)
[ -e /tmp/net.${dev}.has_ibft_config ] && continue
[ -e ${iface}/flags ] && flags=$(read a < ${iface}/flags; echo $a)
# Skip invalid interfaces
(( $flags & 1 )) || continue
# Skip interfaces not used for booting unless using multipath
if ! getargbool 0 rd.iscsi.mp ; then
(( $flags & 2 )) || continue
fi
[ -e ${iface}/dhcp ] && dhcp=$(read a < ${iface}/dhcp; echo $a)
[ -e ${iface}/origin ] && origin=$(read a < ${iface}/origin; echo $a)
[ -e ${iface}/ip-addr ] && ip=$(read a < ${iface}/ip-addr; echo $a)
if [ -n "$ip" ] ; then
case "$ip" in
*.*.*.*)
family=ipv4
;;
*:*)
family=ipv6
;;
esac
fi
if [ -n "$dhcp" ] || [ "$origin" -eq 3 ]; then
if [ "$family" = "ipv6" ] ; then
echo "ip=$dev:dhcp6"
else
echo "ip=$dev:dhcp"
fi
elif [ -e ${iface}/ip-addr ]; then
# skip not assigned ip adresses
[ "$ip" = "0.0.0.0" ] && continue
[ -e ${iface}/gateway ] && gw=$(read a < ${iface}/gateway; echo $a)
[ "$gateway" = "0.0.0.0" ] && unset $gateway
[ -e ${iface}/subnet-mask ] && mask=$(read a < ${iface}/subnet-mask; echo $a)
[ -e ${iface}/prefix-len ] && prefix=$(read a < ${iface}/prefix-len; echo $a)
[ -e ${iface}/primary-dns ] && dns1=$(read a < ${iface}/primary-dns; echo $a)
[ "$dns1" = "0.0.0.0" ] && unset $dns1
[ -e ${iface}/secondary-dns ] && dns2=$(read a < ${iface}/secondary-dns; echo $a)
[ "$dns2" = "0.0.0.0" ] && unset $dns2
[ -e ${iface}/hostname ] && hostname=$(read a < ${iface}/hostname; echo $a)
if [ "$family" = "ipv6" ] ; then
if [ -n "$ip" ] ; then
ip="[$ip]"
[ -n "$prefix" ] || prefix=64
ip="[${ip}/${prefix}]"
mask=
fi
if [ -n "$gw" ] ; then
gw="[${gw}]"
fi
fi
if [ -n "$ip" ] && [ -n "$mask" -o -n "$prefix" ]; then
echo "ip=$ip::$gw:$mask:$hostname:$dev:none${dns1:+:$dns1}${dns2:+:$dns2}"
else
warn "${iface} does not contain a valid iBFT configuration"
warn "ip-addr=$ip"
warn "gateway=$gw"
warn "subnet-mask=$mask"
warn "hostname=$hostname"
fi
else
info "${iface} does not contain a valid iBFT configuration"
ls -l ${iface} | vinfo
fi
if [ -e ${iface}/vlan ]; then
vlan=$(read a < ${iface}/vlan; echo $a)
if [ "$vlan" -ne "0" ]; then
case "$vlan" in
[0-9]*)
echo "vlan=$dev.$vlan:$dev"
echo $mac > /tmp/net.${dev}.${vlan}.has_ibft_config
;;
*)
echo "vlan=$vlan:$dev"
echo $mac > /tmp/net.${vlan}.has_ibft_config
;;
esac
else
echo $mac > /tmp/net.${dev}.has_ibft_config
fi
else
echo $mac > /tmp/net.${dev}.has_ibft_config
fi
done
) >> /etc/cmdline.d/40-ibft.conf
}
parse_iscsi_root()
{
local v
v=${1#iscsi:}
# extract authentication info
case "$v" in
*@*:*:*:*:*)
authinfo=${v%%@*}
v=${v#*@}
# allow empty authinfo to allow having an @ in iscsi_target_name like this:
# netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk
if [ -n "$authinfo" ]; then
OLDIFS="$IFS"
IFS=:
set $authinfo
IFS="$OLDIFS"
if [ $# -gt 4 ]; then
warn "Wrong authentication info in iscsi: parameter!"
return 1
fi
iscsi_username=$1
iscsi_password=$2
if [ $# -gt 2 ]; then
iscsi_in_username=$3
iscsi_in_password=$4
fi
fi
;;
esac
# extract target ip
case "$v" in
[[]*[]]:*)
iscsi_target_ip=${v#[[]}
iscsi_target_ip=${iscsi_target_ip%%[]]*}
v=${v#[[]$iscsi_target_ip[]]:}
;;
*)
iscsi_target_ip=${v%%[:]*}
v=${v#$iscsi_target_ip:}
;;
esac
unset iscsi_target_name
# extract target name
case "$v" in
*:iqn.*)
iscsi_target_name=iqn.${v##*:iqn.}
v=${v%:iqn.*}:
;;
*:eui.*)
iscsi_target_name=eui.${v##*:eui.}
v=${v%:eui.*}:
;;
*:naa.*)
iscsi_target_name=naa.${v##*:naa.}
v=${v%:naa.*}:
;;
esac
# parse the rest
OLDIFS="$IFS"
IFS=:
set $v
IFS="$OLDIFS"
iscsi_protocol=$1; shift # ignored
iscsi_target_port=$1; shift
if [ -n "$iscsi_target_name" ]; then
if [ $# -eq 3 ]; then
iscsi_iface_name=$1; shift
fi
if [ $# -eq 2 ]; then
iscsi_netdev_name=$1; shift
fi
iscsi_lun=$1; shift
if [ $# -ne 0 ]; then
warn "Invalid parameter in iscsi: parameter!"
return 1
fi
return 0
fi
if [ $# -gt 3 ] && [ -n "$1$2" ]; then
if [ -z "$3" ] || [ "$3" -ge 0 ] 2>/dev/null ; then
iscsi_iface_name=$1; shift
iscsi_netdev_name=$1; shift
fi
fi
iscsi_lun=$1; shift
iscsi_target_name=$(printf "%s:" "$@")
iscsi_target_name=${iscsi_target_name%:}
}
ip_to_var() {
local v=${1}:
local i
set --
while [ -n "$v" ]; do
if [ "${v#\[*:*:*\]:}" != "$v" ]; then
# handle IPv6 address
i="${v%%\]:*}"
i="${i##\[}"
set -- "$@" "$i"
v=${v#\[$i\]:}
else
set -- "$@" "${v%%:*}"
v=${v#*:}
fi
done
unset ip srv gw mask hostname dev autoconf macaddr mtu dns1 dns2
if [ $# -eq 0 ]; then
autoconf="error"
return 0
fi
if [ $# -eq 1 ]; then
# format: ip={dhcp|on|any|dhcp6|auto6|either6}
# or
# ip=<ipv4-address> means anaconda-style static config argument cluster
autoconf="$1"
if strglob "$autoconf" "*.*.*.*"; then
# ip=<ipv4-address> means anaconda-style static config argument cluster:
# ip=<ip> gateway=<gw> netmask=<nm> hostname=<host> mtu=<mtu>
# ksdevice={link|bootif|ibft|<MAC>|<ifname>}
ip="$autoconf"
gw=$(getarg gateway=)
mask=$(getarg netmask=)
hostname=$(getarg hostname=)
dev=$(getarg ksdevice=)
autoconf="none"
mtu=$(getarg mtu=)
# handle special values for ksdevice
case "$dev" in
bootif|BOOTIF) dev=$(fix_bootif $(getarg BOOTIF=)) ;;
link) dev="" ;; # FIXME: do something useful with this
ibft) dev="" ;; # ignore - ibft is handled elsewhere
esac
fi
return 0
fi
if [ "$2" = "dhcp" -o "$2" = "on" -o "$2" = "any" -o "$2" = "dhcp6" -o "$2" = "auto6" -o "$2" = "either6" ]; then
# format: ip=<interface>:{dhcp|on|any|dhcp6|auto6}[:[<mtu>][:<macaddr>]]
[ -n "$1" ] && dev="$1"
[ -n "$2" ] && autoconf="$2"
[ -n "$3" ] && mtu=$3
if [ -z "$5" ]; then
macaddr="$4"
else
macaddr="${4}:${5}:${6}:${7}:${8}:${9}"
fi
return 0
fi
# format: ip=<client-IP>:[<peer>]:<gateway-IP>:<netmask>:<client_hostname>:<interface>:{none|off|dhcp|on|any|dhcp6|auto6|ibft}:[:[<mtu>][:<macaddr>]]
[ -n "$1" ] && ip=$1
[ -n "$2" ] && srv=$2
[ -n "$3" ] && gw=$3
[ -n "$4" ] && mask=$4
[ -n "$5" ] && hostname=$5
[ -n "$6" ] && dev=$6
[ -n "$7" ] && autoconf=$7
case "$8" in
[0-9a-fA-F]*:*|[0-9]*.[0-9]*.[0-9]*.[0-9]*)
dns1="$8"
[ -n "$9" ] && dns2="$9"
;;
[0-9]*)
mtu="$8"
if [ -n "${9}" -a -z "${10}" ]; then
macaddr="${9}"
elif [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
fi
;;
*)
if [ -n "${9}" -a -z "${10}" ]; then
macaddr="${9}"
elif [ -n "${9}" -a -n "${10}" -a -n "${11}" -a -n "${12}" -a -n "${13}" -a -n "${14}" ]; then
macaddr="${9}:${10}:${11}:${12}:${13}:${14}"
fi
;;
esac
return 0
}
route_to_var() {
local v=${1}:
local i
set --
while [ -n "$v" ]; do
if [ "${v#\[*:*:*\]:}" != "$v" ]; then
# handle IPv6 address
i="${v%%\]:*}"
i="${i##\[}"
set -- "$@" "$i"
v=${v#\[$i\]:}
else
set -- "$@" "${v%%:*}"
v=${v#*:}
fi
done
unset route_mask route_gw route_dev
case $# in
2) [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"
return 0;;
3) [ -n "$1" ] && route_mask="$1"; [ -n "$2" ] && route_gw="$2"; [ -n "$3" ] && route_dev="$3"
return 0;;
*) return 1;;
esac
}
parse_ifname_opts() {
local IFS=:
set $1
case $# in
7)
ifname_if=$1
# udev requires MAC addresses to be lower case
ifname_mac=$(echo $2:$3:$4:$5:$6:$7 | sed 'y/ABCDEF/abcdef/')
;;
21)
ifname_if=$1
# udev requires MAC addresses to be lower case
ifname_mac=$(echo $2:$3:$4:$5:$6:$7:$8:$9:${10}:${11}:${12}:${13}:${14}:${15}:${16}:${17}:${18}:${19}:${20}:${21} | sed 'y/ABCDEF/abcdef/')
;;
*)
die "Invalid arguments for ifname="
;;
esac
case $ifname_if in
eth[0-9]|eth[0-9][0-9]|eth[0-9][0-9][0-9]|eth[0-9][0-9][0-9][0-9])
warn "ifname=$ifname_if uses the kernel name space for interfaces"
warn "This can fail for multiple network interfaces and is discouraged!"
warn "Please use a custom name like \"netboot\" or \"bluesocket\""
warn "or use biosdevname and no ifname= at all."
;;
esac
}
# some network driver need long time to initialize, wait before it's ready.
wait_for_if_link() {
local cnt=0
local li
local timeout="$(getargs rd.net.timeout.iflink=)"
timeout=${timeout:-60}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
li=$(ip -o link show dev $1 2>/dev/null)
[ -n "$li" ] && return 0
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_if_up() {
local cnt=0
local li
local timeout="$(getargs rd.net.timeout.ifup=)"
timeout=${timeout:-20}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
li=$(ip -o link show up dev $1)
if [ -n "$li" ]; then
case "$li" in
*\<UP*)
return 0;;
*\<*,UP\>*)
return 0;;
*\<*,UP,*\>*)
return 0;;
esac
fi
if strstr "$li" "LOWER_UP" \
&& strstr "$li" "state UNKNOWN" \
&& ! strstr "$li" "DORMANT"; then
return 0
fi
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_route_ok() {
local cnt=0
local timeout="$(getargs rd.net.timeout.route=)"
timeout=${timeout:-20}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
li=$(ip route show)
[ -n "$li" ] && [ -z "${li##*$1*}" ] && return 0
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_ipv6_dad_link() {
local cnt=0
local timeout="$(getargs rd.net.timeout.ipv6dad=)"
timeout=${timeout:-50}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
[ -n "$(ip -6 addr show dev "$1" scope link)" ] \
&& [ -z "$(ip -6 addr show dev "$1" scope link tentative)" ] \
&& return 0
[ -n "$(ip -6 addr show dev "$1" scope link dadfailed)" ] \
&& return 1
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_ipv6_dad() {
local cnt=0
local timeout="$(getargs rd.net.timeout.ipv6dad=)"
timeout=${timeout:-50}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
[ -n "$(ip -6 addr show dev "$1")" ] \
&& [ -z "$(ip -6 addr show dev "$1" tentative)" ] \
&& [ -n "$(ip -6 route list proto ra dev "$1" | grep ^default)" ] \
&& return 0
[ -n "$(ip -6 addr show dev "$1" dadfailed)" ] \
&& return 1
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
wait_for_ipv6_auto() {
local cnt=0
local timeout="$(getargs rd.net.timeout.ipv6auto=)"
timeout=${timeout:-40}
timeout=$(($timeout*10))
while [ $cnt -lt $timeout ]; do
[ -z "$(ip -6 addr show dev "$1" tentative)" ] \
&& [ -n "$(ip -6 route list proto ra dev "$1" | grep ^default)" ] \
&& return 0
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
linkup() {
wait_for_if_link $1 2>/dev/null\
&& ip link set $1 up 2>/dev/null\
&& wait_for_if_up $1 2>/dev/null
}
type hostname >/dev/null 2>&1 || \
hostname() {
cat /proc/sys/kernel/hostname
}
iface_has_carrier() {
local cnt=0
local interface="$1" flags=""
[ -n "$interface" ] || return 2
interface="/sys/class/net/$interface"
[ -d "$interface" ] || return 2
local timeout="$(getargs rd.net.timeout.carrier=)"
timeout=${timeout:-10}
timeout=$(($timeout*10))
linkup "$1"
li=$(ip -o link show up dev $1)
strstr "$li" "NO-CARRIER" && _no_carrier_flag=1
while [ $cnt -lt $timeout ]; do
if [ -n "$_no_carrier_flag" ]; then
li=$(ip -o link show up dev $1)
# NO-CARRIER flag was cleared
strstr "$li" "NO-CARRIER" || return 0
elif ! [ -e "$interface/carrier" ]; then
# sysfs not available and "NO-CARRIER" not displayed
return 0
fi
# double check the syscfs carrier flag
[ -e "$interface/carrier" ] && [ "$(cat $interface/carrier)" = 1 ] && return 0
sleep 0.1
cnt=$(($cnt+1))
done
return 1
}
iface_has_link() {
iface_has_carrier "$@"
}
iface_is_enslaved() {
local _li
_li=$(ip -o link show dev $1)
strstr "$_li" " master " || return 1
return 0
}
find_iface_with_link() {
local iface_path="" iface=""
for iface_path in /sys/class/net/*; do
iface=${iface_path##*/}
str_starts "$iface" "lo" && continue
if iface_has_link $iface; then
echo "$iface"
return 0
fi
done
return 1
}
is_persistent_ethernet_name() {
local _netif="$1"
local _name_assign_type="0"
[ -f "/sys/class/net/$_netif/name_assign_type" ] \
&& _name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")
# NET_NAME_ENUM 1
[ "$_name_assign_type" = "1" ] && return 1
# NET_NAME_PREDICTABLE 2
[ "$_name_assign_type" = "2" ] && return 0
case "$_netif" in
# udev persistent interface names
eno[0-9]|eno[0-9][0-9]|eno[0-9][0-9][0-9]*)
;;
ens[0-9]|ens[0-9][0-9]|ens[0-9][0-9][0-9]*)
;;
enp[0-9]s[0-9]*|enp[0-9][0-9]s[0-9]*|enp[0-9][0-9][0-9]*s[0-9]*)
;;
enP*p[0-9]s[0-9]*|enP*p[0-9][0-9]s[0-9]*|enP*p[0-9][0-9][0-9]*s[0-9]*)
;;
# biosdevname
em[0-9]|em[0-9][0-9]|em[0-9][0-9][0-9]*)
;;
p[0-9]p[0-9]*|p[0-9][0-9]p[0-9]*|p[0-9][0-9][0-9]*p[0-9]*)
;;
*)
return 1
esac
return 0
}
is_kernel_ethernet_name() {
local _netif="$1"
local _name_assign_type="1"
if [ -e "/sys/class/net/$_netif/name_assign_type" ]; then
_name_assign_type=$(cat "/sys/class/net/$_netif/name_assign_type")
case "$_name_assign_type" in
2|3|4)
# NET_NAME_PREDICTABLE 2
# NET_NAME_USER 3
# NET_NAME_RENAMED 4
return 1
;;
1|*)
# NET_NAME_ENUM 1
return 0
;;
esac
fi
# fallback to error prone manual name check
case "$_netif" in
eth[0-9]|eth[0-9][0-9]|eth[0-9][0-9][0-9]*)
return 0
;;
*)
return 1
esac
}
iface_get_subchannels() {
local _netif
local _subchannels
_netif="$1"
_subchannels=$({
for i in /sys/class/net/$_netif/device/cdev[0-9]*; do
[ -e $i ] || continue
channel=$(readlink -f $i)
printf -- "%s" "${channel##*/},"
done
})
[ -n "$_subchannels" ] || return 1
printf -- "%s" ${_subchannels%,}
}
PK �5�ZT��_ _ 40network/ifname-genrules.shnu ȯ�� #!/bin/sh
# if there are no ifname parameters, just use NAME=KERNEL
if ! getarg ifname= >/dev/null ; then
return
fi
command -v parse_ifname_opts >/dev/null || . /lib/net-lib.sh
{
for p in $(getargs ifname=); do
parse_ifname_opts $p
if [ -f /tmp/ifname-$ifname_mac ]; then
read oldif < /tmp/ifname-$ifname_mac
fi
if [ -f /tmp/ifname-$ifname_if ]; then
read oldmac < /tmp/ifname-$ifname_if
fi
if [ -n "$oldif" -a -n "$oldmac" -a "$oldif" = "$ifname_if" -a "$oldmac" = "$ifname_mac" ]; then
# skip same ifname= declaration
continue
fi
[ -n "$oldif" ] && warn "Multiple interface names specified for MAC $ifname_mac: $oldif"
[ -n "$oldmac" ] && warn "Multiple MAC specified for $ifname_if: $oldmac"
printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="%s", ATTR{type}=="1", NAME="%s"\n' "$ifname_mac" "$ifname_if"
echo $ifname_if > /tmp/ifname-$ifname_mac
echo $ifname_mac > /tmp/ifname-$ifname_if
done
} >> /etc/udev/rules.d/80-ifname.rules
PK �5�Z�4L�0 0 40network/dhcp-root.shnu ȯ�� #!/bin/sh
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
if [ -z "$netroot" ]; then
for netroot in $(getargs netroot=); do
[ "$netroot" = "dhcp" ] && break
[ "$netroot" = "dhcp6" ] && break
done
[ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ] || unset netroot
fi
if [ "$root" = "dhcp" ] || [ "$root" = "dhcp6" ] || [ "$netroot" = "dhcp" ] || [ "$netroot" = "dhcp6" ]; then
# Tell ip= checker that we need dhcp
NEEDDHCP="1"
# Done, all good!
rootok=1
if [ "$netroot" != "dhcp" ] && [ "$netroot" != "dhcp6" ]; then
netroot=$root
fi
# Shut up init error check
[ -z "$root" ] && root="dhcp"
echo '[ -d $NEWROOT/proc -o -e /dev/root ]' > $hookdir/initqueue/finished/dhcp.sh
fi
PK �5�Z���� � 99kdumpbase/monitor_dd_progressnu �[��� #!/bin/sh
SRC_FILE_MB=$1
while true
do
DD_PID=`pidof dd`
if [ -n "$DD_PID" ]; then
break
fi
done
while true
do
sleep 5
if [ ! -d /proc/$DD_PID ]; then
break
fi
kill -s USR1 $DD_PID
CURRENT_SIZE=`tail -n 1 /tmp/dd_progress_file | sed "s/[^0-9].*//g"`
[ -n "$CURRENT_SIZE" ] && {
CURRENT_MB=$(($CURRENT_SIZE / 1048576))
echo -e "Copied $CURRENT_MB MB / $SRC_FILE_MB MB\r"
}
done
rm -f /tmp/dd_progress_file
PK �5�Z�j\㴋 �� 99kdumpbase/module-setup.shnu ȯ�� #!/bin/bash
_save_kdump_netifs() {
local _name
if [[ -n $2 ]]; then
_name=$2
else
_name=$1
fi
unique_netifs[$1]=$_name
}
_get_kdump_netifs() {
echo -n "${!unique_netifs[@]}"
}
kdump_module_init() {
if ! [[ -d "${initdir}/tmp" ]]; then
mkdir -p "${initdir}/tmp"
fi
. /lib/kdump/kdump-lib.sh
}
check() {
[[ $debug ]] && set -x
#kdumpctl sets this explicitly
if [ -z "$IN_KDUMP" ] || [ ! -f /etc/kdump.conf ]
then
return 1
fi
return 0
}
depends() {
local _dep="base shutdown"
kdump_module_init
add_opt_module() {
[[ " $omit_dracutmodules " != *\ $1\ * ]] && _dep="$_dep $1"
}
if is_squash_available; then
add_opt_module squash
else
dwarning "Required modules to build a squashed kdump image is missing!"
fi
add_opt_module watchdog-modules
if is_wdt_active; then
add_opt_module watchdog
fi
if is_ssh_dump_target; then
_dep="$_dep ssh-client"
fi
if is_lvm2_thinp_dump_target; then
if grep -q lvmthinpool-monitor <<< $(dracut --list-modules); then
add_opt_module lvmthinpool-monitor
else
dwarning "Required lvmthinpool-monitor modules is missing! Please upgrade dracut >= 057."
fi
fi
if [ "$(uname -m)" = "s390x" ]; then
_dep="$_dep znet"
fi
if [ -n "$( find /sys/devices -name drm )" ] || [ -d /sys/module/hyperv_fb ]; then
add_opt_module drm
fi
if is_generic_fence_kdump || is_pcs_fence_kdump; then
_dep="$_dep network"
fi
echo $_dep
}
kdump_is_bridge() {
[ -d /sys/class/net/"$1"/bridge ]
}
kdump_is_bond() {
[ -d /sys/class/net/"$1"/bonding ]
}
kdump_is_team() {
[ -f /usr/bin/teamnl ] && teamnl $1 ports &> /dev/null
}
kdump_is_vlan() {
[ -f /proc/net/vlan/"$1" ]
}
# $1: netdev name
source_ifcfg_file() {
local ifcfg_file
ifcfg_file=$(get_ifcfg_filename $1)
if [ -f "${ifcfg_file}" ]; then
. ${ifcfg_file}
else
dwarning "The ifcfg file of $1 is not found!"
fi
}
add_dns_netdev() {
local _server _route
_server=$1
_route=`/sbin/ip -o route get to $_server 2>&1`
[ $? != 0 ] && echo "DNS server $_server unreachable"
_netdev=$(get_ip_route_field "$_route" "dev")
_save_kdump_netifs "$_netdev" "$(kdump_setup_ifname $_netdev)"
}
# $1: netdev name
kdump_setup_dns() {
local _nameserver _dns
local _dnsfile=${initdir}/etc/cmdline.d/42dns.conf
source_ifcfg_file $1
[ -n "$DNS1" ] && echo "nameserver=$DNS1" > "$_dnsfile" && add_dns_netdev "$DNS1"
[ -n "$DNS2" ] && echo "nameserver=$DNS2" >> "$_dnsfile" && add_dns_netdev "$DNS2"
while read content;
do
_nameserver=$(echo $content | grep ^nameserver)
[ -z "$_nameserver" ] && continue
_dns=$(echo $_nameserver | cut -d' ' -f2)
[ -z "$_dns" ] && continue
if [ ! -f $_dnsfile ] || [ ! $(cat $_dnsfile | grep -q $_dns) ]; then
echo "nameserver=$_dns" >> "$_dnsfile"
add_dns_netdev "$_dns"
fi
done < "/etc/resolv.conf"
}
# $1: repeat times
# $2: string to be repeated
# $3: separator
repeatedly_join_str() {
local _count="$1"
local _str="$2"
local _separator="$3"
local i _res
if [[ "$_count" -le 0 ]]; then
echo -n ""
return
fi
i=0
_res="$_str"
((_count--))
while [[ "$i" -lt "$_count" ]]; do
((i++))
_res="${_res}${_separator}${_str}"
done
echo -n "$_res"
}
# $1: prefix
# $2: ipv6_flag="-6" indicates it's IPv6
# Given a prefix, calculate the netmask (equivalent of "ipcalc -m")
# by concatenating three parts,
# 1) the groups with all bits set 1
# 2) a group with partial bits set to 0
# 3) the groups with all bits set to 0
cal_netmask_by_prefix() {
local _prefix="$1"
local _ipv6_flag="$2" _ipv6
local _bits_per_octet=8
local _count _res _octets_per_group _octets_total _seperator _total_groups
local _max_group_value _max_group_value_repr _bits_per_group _tmp _zero_bits
if [[ "$_ipv6_flag" == "-6" ]]; then
_ipv6=1
else
_ipv6=0
fi
if [[ "$_prefix" -lt 0 || "$_prefix" -gt 128 ]] || \
( ((!_ipv6)) && [[ "$_prefix" -gt 32 ]] ); then
derror "Bad prefix:$_prefix for calculating netmask"
exit 1
fi
if ((_ipv6)); then
_octets_per_group=2
_octets_total=16
_seperator=":"
else
_octets_per_group=1
_octets_total=4
_seperator="."
fi
_total_groups=$((_octets_total/_octets_per_group))
_bits_per_group=$((_octets_per_group * _bits_per_octet))
_max_group_value=$(((1 << _bits_per_group) - 1))
if ((_ipv6)); then
_max_group_value_repr=$(printf "%x" $_max_group_value)
else
_max_group_value_repr="$_max_group_value"
fi
_count=$((_prefix/_octets_per_group/_bits_per_octet))
_first_part=$(repeatedly_join_str "$_count" "$_max_group_value_repr" "$_seperator")
_res="$_first_part"
_tmp=$((_octets_total*_bits_per_octet-_prefix))
_zero_bits=$(expr $_tmp % $_bits_per_group)
if [[ "$_zero_bits" -ne 0 ]]; then
_second_part=$((_max_group_value >> _zero_bits << _zero_bits))
if ((_ipv6)); then
_second_part=$(printf "%x" $_second_part)
fi
((_count++))
if [[ -z "$_first_part" ]]; then
_res="$_second_part"
else
_res="${_first_part}${_seperator}${_second_part}"
fi
fi
_count=$((_total_groups-_count))
if [[ "$_count" -eq 0 ]]; then
echo -n "$_res"
return
fi
if ((_ipv6)) && [[ "$_count" -gt 1 ]] ; then
# use condensed notion for IPv6
_third_part=":"
else
_third_part=$(repeatedly_join_str "$_count" "0" "$_seperator")
fi
if [[ -z "$_res" ]] && ((!_ipv6)) ; then
echo -n "${_third_part}"
else
echo -n "${_res}${_seperator}${_third_part}"
fi
}
#$1: netdev name
#$2: srcaddr
#if it use static ip echo it, or echo null
kdump_static_ip() {
local _netdev="$1" _srcaddr="$2" kdumpnic="$3" _ipv6_flag
local _netmask _gateway _ipaddr _target _nexthop _prefix
_ipaddr=$(ip addr show dev $_netdev permanent | awk "/ $_srcaddr\/.* /{print \$2}")
if is_ipv6_address $_srcaddr; then
_ipv6_flag="-6"
fi
if [ -n "$_ipaddr" ]; then
_gateway=$(ip $_ipv6_flag route list dev $_netdev | \
awk '/^default /{print $3}' | head -n 1)
if [ "x" != "x"$_ipv6_flag ]; then
# _ipaddr="2002::56ff:feb6:56d5/64", _netmask is the number after "/"
_netmask=${_ipaddr#*\/}
_srcaddr="[$_srcaddr]"
_gateway="[$_gateway]"
else
_prefix=$(cut -d'/' -f2 <<< "$_ipaddr")
_netmask=$(cal_netmask_by_prefix "$_prefix" "$_ipv6_flag")
if [[ "$?" -ne 0 ]]; then
derror "Failed to calculate netmask for $_ipaddr"
exit 1
fi
fi
echo -n "${_srcaddr}::${_gateway}:${_netmask}::"
fi
/sbin/ip $_ipv6_flag route show | grep -v default | grep ".*via.* $_netdev " |\
while read _route; do
_target=`echo $_route | cut -d ' ' -f1`
_nexthop=`echo $_route | cut -d ' ' -f3`
if [ "x" != "x"$_ipv6_flag ]; then
_target="[$_target]"
_nexthop="[$_nexthop]"
fi
echo "rd.route=$_target:$_nexthop:$kdumpnic"
done >> ${initdir}/etc/cmdline.d/45route-static.conf
}
kdump_get_mac_addr() {
cat /sys/class/net/$1/address
}
#Bonding or team master modifies the mac address
#of its slaves, we should use perm address
kdump_get_perm_addr() {
local addr=$(ethtool -P $1 | sed -e 's/Permanent address: //')
if [ -z "$addr" ] || [ "$addr" = "00:00:00:00:00:00" ]
then
derror "Can't get the permanent address of $1"
else
echo "$addr"
fi
}
# Prefix kernel assigned names with "kdump-". EX: eth0 -> kdump-eth0
# Because kernel assigned names are not persistent between 1st and 2nd
# kernel. We could probably end up with eth0 being eth1, eth0 being
# eth1, and naming conflict happens.
kdump_setup_ifname() {
local _ifname
# If ifname already has 'kdump-' prefix, we must be switching from
# fadump to kdump. Skip prefixing 'kdump-' in this case as adding
# another prefix may truncate the ifname. Since an ifname with
# 'kdump-' is already persistent, this should be fine.
if [[ $1 =~ ^eth.* ]] && [[ ! $1 =~ ^kdump-* ]]; then
_ifname="kdump-$1"
else
_ifname="$1"
fi
echo "$_ifname"
}
kdump_install_nm_netif_allowlist() {
local _netif _except_netif _netif_allowlist _netif_allowlist_nm_conf
for _netif in $1; do
_per_mac=$(kdump_get_perm_addr "$_netif")
if [[ "$_per_mac" != 'not set' ]]; then
_except_netif="mac:$_per_mac"
else
_except_netif="interface-name:${unique_netifs[${_netif}]}"
fi
_netif_allowlist="${_netif_allowlist}except:${_except_netif};"
done
_netif_allowlist_nm_conf=${initdir}/tmp/netif_allowlist_nm_conf
cat << EOF > "$_netif_allowlist_nm_conf"
[device-others]
match-device=${_netif_allowlist}
managed=false
EOF
inst "$_netif_allowlist_nm_conf" "/etc/NetworkManager/conf.d/10-kdump-netif_allowlist.conf"
rm -f "$_netif_allowlist_nm_conf"
}
_get_nic_driver() {
ethtool -i "$1" | sed -n -E "s/driver: (.*)/\1/p"
}
_get_hpyerv_physical_driver() {
local _physical_nic
_physical_nic=$(find /sys/class/net/"$1"/ -name 'lower_*' | sed -En "s/\/.*lower_(.*)/\1/p")
[[ -n $_physical_nic ]] || return
_get_nic_driver "$_physical_nic"
}
kdump_install_nic_driver() {
local _netif _driver _drivers
_drivers=()
for _netif in $1; do
[[ $_netif == lo ]] && continue
_driver=$(_get_nic_driver "$_netif")
if [[ -z $_driver ]]; then
derror "Failed to get the driver of $_netif"
exit 1
fi
if [[ $_driver == "802.1Q VLAN Support" ]]; then
# ethtool somehow doesn't return the driver name for a VLAN NIC
_driver=8021q
elif [[ $_driver == "team" ]]; then
# install the team mode drivers like team_mode_roundrobin.ko as well
_driver='=drivers/net/team'
elif [[ $_driver == "hv_netvsc" ]]; then
# A Hyper-V VM may have accelerated networking
# https://learn.microsoft.com/en-us/azure/virtual-network/accelerated-networking-overview
# Install the driver of physical NIC as well
_drivers+=("$(_get_hpyerv_physical_driver "$_netif")")
fi
_drivers+=("$_driver")
done
[[ -n ${_drivers[*]} ]] || return
instmods "${_drivers[@]}"
}
kdump_setup_bridge() {
local _netdev=$1
local _brif _dev _mac _kdumpdev
for _dev in `ls /sys/class/net/$_netdev/brif/`; do
_kdumpdev=""
if kdump_is_bond "$_dev"; then
kdump_setup_bond "$_dev"
elif kdump_is_team "$_dev"; then
kdump_setup_team "$_dev"
elif kdump_is_vlan "$_dev"; then
kdump_setup_vlan "$_dev"
else
_mac=$(kdump_get_mac_addr $_dev)
_kdumpdev=$(kdump_setup_ifname $_dev)
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/41bridge.conf
fi
_save_kdump_netifs "$_dev" "$_kdumpdev"
[[ -z $_kdumpdev ]] && _kdumpdev=$_dev
_brif+="$_kdumpdev,"
done
echo " bridge=$_netdev:$(echo $_brif | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/41bridge.conf
}
kdump_setup_bond() {
local _netdev=$1
local _dev _mac _slaves _kdumpdev
for _dev in `cat /sys/class/net/$_netdev/bonding/slaves`; do
_mac=$(kdump_get_perm_addr $_dev)
_kdumpdev=$(kdump_setup_ifname $_dev)
_save_kdump_netifs "$_dev" "$_kdumpdev"
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/42bond.conf
_slaves+="$_kdumpdev,"
done
echo -n " bond=$_netdev:$(echo $_slaves | sed 's/,$//')" >> ${initdir}/etc/cmdline.d/42bond.conf
# Get bond options specified in ifcfg
source_ifcfg_file $_netdev
bondoptions=":$(echo $BONDING_OPTS | xargs echo | tr " " ",")"
echo "$bondoptions" >> ${initdir}/etc/cmdline.d/42bond.conf
}
kdump_setup_team() {
local _netdev=$1
local _dev _mac _slaves _kdumpdev
for _dev in `teamnl $_netdev ports | awk -F':' '{print $2}'`; do
_mac=$(kdump_get_perm_addr $_dev)
_kdumpdev=$(kdump_setup_ifname $_dev)
_save_kdump_netifs "$_dev" "$_kdumpdev"
echo -n " ifname=$_kdumpdev:$_mac" >> ${initdir}/etc/cmdline.d/44team.conf
_slaves+="$_kdumpdev,"
done
echo " team=$_netdev:$(echo $_slaves | sed -e 's/,$//')" >> ${initdir}/etc/cmdline.d/44team.conf
#Buggy version teamdctl outputs to stderr!
#Try to use the latest version of teamd.
teamdctl "$_netdev" config dump > ${initdir}/tmp/$$-$_netdev.conf
if [ $? -ne 0 ]
then
derror "teamdctl failed."
exit 1
fi
inst_dir /etc/teamd
inst_simple ${initdir}/tmp/$$-$_netdev.conf "/etc/teamd/$_netdev.conf"
rm -f ${initdir}/tmp/$$-$_netdev.conf
}
kdump_setup_vlan() {
local _netdev=$1
local _phydev="$(awk '/^Device:/{print $2}' /proc/net/vlan/"$_netdev")"
local _netmac="$(kdump_get_mac_addr $_phydev)"
local _kdumpdev
#Just support vlan over bond and team
if kdump_is_bridge "$_phydev"; then
derror "Vlan over bridge is not supported!"
exit 1
elif kdump_is_bond "$_phydev"; then
kdump_setup_bond "$_phydev"
echo " vlan=$(kdump_setup_ifname $_netdev):$_phydev" > ${initdir}/etc/cmdline.d/43vlan.conf
else
_kdumpdev="$(kdump_setup_ifname $_phydev)"
echo " vlan=$(kdump_setup_ifname $_netdev):$_kdumpdev ifname=$_kdumpdev:$_netmac" > ${initdir}/etc/cmdline.d/43vlan.conf
fi
_save_kdump_netifs "$_phydev" "$_kdumpdev"
}
# find online znet device
# return ifname (_netdev)
# code reaped from the list_configured function of
# https://github.com/hreinecke/s390-tools/blob/master/zconf/znetconf
find_online_znet_device() {
local CCWGROUPBUS_DEVICEDIR="/sys/bus/ccwgroup/devices"
local NETWORK_DEVICES d ifname ONLINE
[ ! -d "$CCWGROUPBUS_DEVICEDIR" ] && return
NETWORK_DEVICES=$(find $CCWGROUPBUS_DEVICEDIR)
for d in $NETWORK_DEVICES
do
[ ! -f "$d/online" ] && continue
read ONLINE < $d/online
if [ $ONLINE -ne 1 ]; then
continue
fi
# determine interface name, if there (only for qeth and if
# device is online)
if [ -f $d/if_name ]
then
read ifname < $d/if_name
elif [ -d $d/net ]
then
ifname=$(ls $d/net/)
fi
[ -n "$ifname" ] && break
done
echo -n "$ifname"
}
# setup s390 znet cmdline
# $1: netdev name
kdump_setup_znet() {
local _options=""
local _netdev=$1
source_ifcfg_file $_netdev
[[ -z "$NETTYPE" ]] && return
[[ -z "$SUBCHANNELS" ]] && return
for i in $OPTIONS; do
_options=${_options},$i
done
echo rd.znet=${NETTYPE},${SUBCHANNELS}${_options} rd.znet_ifname=$(kdump_setup_ifname $_netdev):${SUBCHANNELS} > ${initdir}/etc/cmdline.d/30znet.conf
}
_get_nic_driver() {
ethtool -i "$1" | sed -n -E "s/driver: (.*)/\1/p"
}
_rename_hypver_netdev() {
local _udev_rule_dir
_udev_rule_dir=${initdir}/etc/udev/rules.d
mkdir -p "$_udev_rule_dir"
printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="hv_netvsc", ATTR{address}=="%s", ATTR{type}=="1", NAME="%s"\n' "$2" "$1" > "${_udev_rule_dir}/80-hv_netvsc-ifname.rules"
}
# Setup dracut to bringup a given network interface
kdump_setup_netdev() {
local _netdev=$1 _srcaddr=$2
local _static _proto _ip_conf _ip_opts _ifname_opts kdumpnic
local _netmac=$(kdump_get_mac_addr $_netdev)
local _znet_netdev
kdumpnic=$(kdump_setup_ifname $_netdev)
_znet_netdev=$(find_online_znet_device)
if [[ -n "$_znet_netdev" ]]; then
$(kdump_setup_znet "$_znet_netdev")
if [[ $? != 0 ]]; then
derror "Failed to set up znet"
exit 1
fi
fi
_static=$(kdump_static_ip $_netdev $_srcaddr $kdumpnic)
if [ -n "$_static" ]; then
_proto=none
elif is_ipv6_address $_srcaddr; then
_proto=auto6
else
_proto=dhcp
fi
_ip_conf="${initdir}/etc/cmdline.d/40ip.conf"
_ip_opts=" ip=${_static}$kdumpnic:${_proto}"
# dracut doesn't allow duplicated configuration for same NIC, even they're exactly the same.
# so we have to avoid adding duplicates
# We should also check /proc/cmdline for existing ip=xx arg.
# For example, iscsi boot will specify ip=xxx arg in cmdline.
if [ ! -f $_ip_conf ] || ! grep -q $_ip_opts $_ip_conf &&\
! grep -q "ip=[^[:space:]]*$_netdev" /proc/cmdline; then
echo "$_ip_opts" >> $_ip_conf
fi
if kdump_is_bridge "$_netdev"; then
kdump_setup_bridge "$_netdev"
elif kdump_is_bond "$_netdev"; then
kdump_setup_bond "$_netdev"
elif kdump_is_team "$_netdev"; then
kdump_setup_team "$_netdev"
elif kdump_is_vlan "$_netdev"; then
kdump_setup_vlan "$_netdev"
else
if [[ $(_get_nic_driver "$1") != hv_netvsc ]]; then
_ifname_opts=" ifname=$kdumpnic:$_netmac"
echo "$_ifname_opts" >> $_ip_conf
else
_rename_hypver_netdev "$kdumpnic" "$_netmac"
fi
fi
_save_kdump_netifs "$_netdev" "$_kdumpdev"
kdump_setup_dns "$_netdev"
if [ ! -f ${initdir}/etc/cmdline.d/50neednet.conf ]; then
# network-manager module needs this parameter
echo "rd.neednet" >> ${initdir}/etc/cmdline.d/50neednet.conf
fi
}
get_ip_route_field()
{
if `echo $1 | grep -q $2`; then
echo ${1##*$2} | cut -d ' ' -f1
fi
}
#Function:kdump_install_net
#$1: config values of net line in kdump.conf
#$2: srcaddr of network device
kdump_install_net() {
local _server _netdev _srcaddr _route _serv_tmp
local config_val="$1"
_server=$(get_remote_host $config_val)
if is_hostname $_server; then
_serv_tmp=`getent ahosts $_server | grep -v : | head -n 1`
if [ -z "$_serv_tmp" ]; then
_serv_tmp=`getent ahosts $_server | head -n 1`
fi
_server=`echo $_serv_tmp | cut -d' ' -f1`
fi
_route=`/sbin/ip -o route get to $_server 2>&1`
[ $? != 0 ] && echo "Bad kdump location: $config_val" && exit 1
#the field in the ip output changes if we go to another subnet
_srcaddr=$(get_ip_route_field "$_route" "src")
_netdev=$(get_ip_route_field "$_route" "dev")
kdump_setup_netdev "${_netdev}" "${_srcaddr}"
#save netdev used for kdump as cmdline
# Whoever calling kdump_install_net() is setting up the default gateway,
# ie. bootdev/kdumpnic. So don't override the setting if calling
# kdump_install_net() for another time. For example, after setting eth0 as
# the default gate way for network dump, eth1 in the fence kdump path will
# call kdump_install_net again and we don't want eth1 to be the default
# gateway.
if [ ! -f ${initdir}/etc/cmdline.d/60kdumpnic.conf ] &&
[ ! -f ${initdir}/etc/cmdline.d/70bootdev.conf ]; then
echo "kdumpnic=$(kdump_setup_ifname $_netdev)" > ${initdir}/etc/cmdline.d/60kdumpnic.conf
echo "bootdev=$(kdump_setup_ifname $_netdev)" > ${initdir}/etc/cmdline.d/70bootdev.conf
fi
}
# install etc/kdump/pre.d and /etc/kdump/post.d
kdump_install_pre_post_conf() {
if [ -d /etc/kdump/pre.d ]; then
for file in /etc/kdump/pre.d/*; do
if [ -x "$file" ]; then
dracut_install $file
elif [ $file != "/etc/kdump/pre.d/*" ]; then
echo "$file is not executable"
fi
done
fi
if [ -d /etc/kdump/post.d ]; then
for file in /etc/kdump/post.d/*; do
if [ -x "$file" ]; then
dracut_install $file
elif [ $file != "/etc/kdump/post.d/*" ]; then
echo "$file is not executable"
fi
done
fi
}
default_dump_target_install_conf()
{
local _target _fstype
local _mntpoint _save_path
is_user_configured_dump_target && return
_save_path=$(get_bind_mount_source $(get_save_path))
_target=$(get_target_from_path $_save_path)
_mntpoint=$(get_mntpoint_from_target $_target)
_fstype=$(get_fs_type_from_target $_target)
if is_fs_type_nfs $_fstype; then
kdump_install_net "$_target"
_fstype="nfs"
else
_target=$(kdump_get_persistent_dev $_target)
fi
echo "$_fstype $_target" >> ${initdir}/tmp/$$-kdump.conf
# don't touch the path under root mount
if [ "$_mntpoint" != "/" ]; then
_save_path=${_save_path##"$_mntpoint"}
fi
#erase the old path line, then insert the parsed path
sed -i "/^path/d" ${initdir}/tmp/$$-kdump.conf
echo "path $_save_path" >> ${initdir}/tmp/$$-kdump.conf
}
#install kdump.conf and what user specifies in kdump.conf
kdump_install_conf() {
local _opt _val _pdev
sed -ne '/^#/!p' /etc/kdump.conf > ${initdir}/tmp/$$-kdump.conf
while read _opt _val;
do
# remove inline comments after the end of a directive.
case "$_opt" in
raw)
_pdev=$(persistent_policy="by-id" kdump_get_persistent_dev $_val)
sed -i -e "s#^$_opt[[:space:]]\+$_val#$_opt $_pdev#" ${initdir}/tmp/$$-kdump.conf
;;
ext[234]|xfs|btrfs|minix)
_pdev=$(kdump_get_persistent_dev $_val)
sed -i -e "s#^$_opt[[:space:]]\+$_val#$_opt $_pdev#" ${initdir}/tmp/$$-kdump.conf
;;
ssh|nfs)
kdump_install_net "$_val"
;;
dracut_args)
if [[ $(get_dracut_args_fstype "$_val") = nfs* ]] ; then
kdump_install_net "$(get_dracut_args_target "$_val")"
fi
;;
kdump_pre|kdump_post|extra_bins)
dracut_install $_val
;;
core_collector)
dracut_install "${_val%%[[:blank:]]*}"
;;
esac
done <<< "$(read_strip_comments /etc/kdump.conf)"
kdump_install_pre_post_conf
default_dump_target_install_conf
kdump_configure_fence_kdump "${initdir}/tmp/$$-kdump.conf"
inst "${initdir}/tmp/$$-kdump.conf" "/etc/kdump.conf"
rm -f ${initdir}/tmp/$$-kdump.conf
}
# Default sysctl parameters should suffice for kdump kernel.
# Remove custom configurations sysctl.conf & sysctl.d/*
remove_sysctl_conf() {
# As custom configurations like vm.min_free_kbytes can lead
# to OOM issues in kdump kernel, avoid them
rm -f "${initdir}/etc/sysctl.conf"
rm -rf "${initdir}/etc/sysctl.d"
rm -rf "${initdir}/run/sysctl.d"
rm -rf "${initdir}/usr/lib/sysctl.d"
}
kdump_iscsi_get_rec_val() {
local result
# The open-iscsi 742 release changed to using flat files in
# /var/lib/iscsi.
result=$(/sbin/iscsiadm --show -m session -r ${1} | grep "^${2} = ")
result=${result##* = }
echo $result
}
kdump_get_iscsi_initiator() {
local _initiator
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
[ -f "$initiator_conf" ] || return 1
while read _initiator; do
[ -z "${_initiator%%#*}" ] && continue # Skip comment lines
case $_initiator in
InitiatorName=*)
initiator=${_initiator#InitiatorName=}
echo "rd.iscsi.initiator=${initiator}"
return 0;;
*) ;;
esac
done < ${initiator_conf}
return 1
}
# Figure out iBFT session according to session type
is_ibft() {
[ "$(kdump_iscsi_get_rec_val $1 "node.discovery_type")" = fw ]
}
kdump_setup_iscsi_device() {
local path=$1
local tgt_name; local tgt_ipaddr;
local username; local password; local userpwd_str;
local username_in; local password_in; local userpwd_in_str;
local netdev
local srcaddr
local idev
local netroot_str ; local initiator_str;
local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf"
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
dinfo "Found iscsi component $1"
# Check once before getting explicit values, so we can bail out early,
# e.g. in case of pure-hardware(all-offload) iscsi.
if ! /sbin/iscsiadm -m session -r ${path} &>/dev/null ; then
return 1
fi
if is_ibft ${path}; then
return
fi
# Remove software iscsi cmdline generated by 95iscsi,
# and let kdump regenerate here.
rm -f ${initdir}/etc/cmdline.d/95iscsi.conf
tgt_name=$(kdump_iscsi_get_rec_val ${path} "node.name")
tgt_ipaddr=$(kdump_iscsi_get_rec_val ${path} "node.conn\[0\].address")
# get and set username and password details
username=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username")
[ "$username" == "<empty>" ] && username=""
password=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password")
[ "$password" == "<empty>" ] && password=""
username_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username_in")
[ -n "$username" ] && userpwd_str="$username:$password"
# get and set incoming username and password details
[ "$username_in" == "<empty>" ] && username_in=""
password_in=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password_in")
[ "$password_in" == "<empty>" ] && password_in=""
[ -n "$username_in" ] && userpwd_in_str=":$username_in:$password_in"
netdev=$(/sbin/ip route get to ${tgt_ipaddr} | \
sed 's|.*dev \(.*\).*|\1|g')
srcaddr=$(echo $netdev | awk '{ print $3; exit }')
netdev=$(echo $netdev | awk '{ print $1; exit }')
kdump_setup_netdev $netdev $srcaddr
# prepare netroot= command line
# FIXME: Do we need to parse and set other parameters like protocol, port
# iscsi_iface_name, netdev_name, LUN etc.
if is_ipv6_address $tgt_ipaddr; then
tgt_ipaddr="[$tgt_ipaddr]"
fi
netroot_str="netroot=iscsi:${userpwd_str}${userpwd_in_str}@$tgt_ipaddr::::$tgt_name"
[[ -f $netroot_conf ]] || touch $netroot_conf
# If netroot target does not exist already, append.
if ! grep -q $netroot_str $netroot_conf; then
echo $netroot_str >> $netroot_conf
dinfo "Appended $netroot_str to $netroot_conf"
fi
# Setup initator
initiator_str=$(kdump_get_iscsi_initiator)
[ $? -ne "0" ] && derror "Failed to get initiator name" && return 1
# If initiator details do not exist already, append.
if ! grep -q "$initiator_str" $netroot_conf; then
echo "$initiator_str" >> $netroot_conf
dinfo "Appended "$initiator_str" to $netroot_conf"
fi
}
kdump_check_iscsi_targets () {
# If our prerequisites are not met, fail anyways.
type -P iscsistart >/dev/null || return 1
kdump_check_setup_iscsi() {
local _dev
_dev=$1
[[ -L /sys/dev/block/$_dev ]] || return
cd "$(readlink -f /sys/dev/block/$_dev)"
until [[ -d sys || -d iscsi_session ]]; do
cd ..
done
[[ -d iscsi_session ]] && kdump_setup_iscsi_device "$PWD"
}
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves_all kdump_check_setup_iscsi
}
}
# hostname -a is deprecated, do it by ourself
get_alias() {
local ips
local entries
local alias_set
ips=$(hostname -I)
for ip in $ips
do
# in /etc/hosts, alias can come at the 2nd column
entries=$(grep $ip /etc/hosts | awk '{ $1=""; print $0 }')
if [ $? -eq 0 ]; then
alias_set="$alias_set $entries"
fi
done
echo $alias_set
}
is_localhost() {
local hostnames=$(hostname -A)
local shortnames=$(hostname -A -s)
local aliasname=$(get_alias)
local nodename=$1
hostnames="$hostnames $shortnames $aliasname"
for name in ${hostnames}; do
if [ "$name" == "$nodename" ]; then
return 0
fi
done
return 1
}
# retrieves fence_kdump nodes from Pacemaker cluster configuration
get_pcs_fence_kdump_nodes() {
local nodes
# get cluster nodes from cluster cib, get interface and ip address
nodelist=`pcs cluster cib | xmllint --xpath "/cib/status/node_state/@uname" -`
# nodelist is formed as 'uname="node1" uname="node2" ... uname="nodeX"'
# we need to convert each to node1, node2 ... nodeX in each iteration
for node in ${nodelist}; do
# convert $node from 'uname="nodeX"' to 'nodeX'
eval $node
nodename=$uname
# Skip its own node name
if [ "$nodename" = `hostname` -o "$nodename" = `hostname -s` ]; then
continue
fi
nodes="$nodes $nodename"
done
echo $nodes
}
# retrieves fence_kdump args from config file
get_pcs_fence_kdump_args() {
if [ -f $FENCE_KDUMP_CONFIG_FILE ]; then
. $FENCE_KDUMP_CONFIG_FILE
echo $FENCE_KDUMP_OPTS
fi
}
get_generic_fence_kdump_nodes() {
local filtered
local nodes
nodes=$(get_option_value "fence_kdump_nodes")
for node in ${nodes}; do
# Skip its own node name
if is_localhost $node; then
continue
fi
filtered="$filtered $node"
done
echo $filtered
}
# setup fence_kdump in cluster
# setup proper network and install needed files
kdump_configure_fence_kdump () {
local kdump_cfg_file=$1
local nodes
local args
if is_generic_fence_kdump; then
nodes=$(get_generic_fence_kdump_nodes)
elif is_pcs_fence_kdump; then
nodes=$(get_pcs_fence_kdump_nodes)
# set appropriate options in kdump.conf
echo "fence_kdump_nodes $nodes" >> ${kdump_cfg_file}
args=$(get_pcs_fence_kdump_args)
if [ -n "$args" ]; then
echo "fence_kdump_args $args" >> ${kdump_cfg_file}
fi
else
# fence_kdump not configured
return 1
fi
# setup network for each node
for node in ${nodes}; do
kdump_install_net $node
done
dracut_install /etc/hosts
dracut_install /etc/nsswitch.conf
dracut_install $FENCE_KDUMP_SEND
}
# Install a random seed used to feed /dev/urandom
# By the time kdump service starts, /dev/uramdom is already fed by systemd
kdump_install_random_seed() {
local poolsize=`cat /proc/sys/kernel/random/poolsize`
if [ ! -d ${initdir}/var/lib/ ]; then
mkdir -p ${initdir}/var/lib/
fi
dd if=/dev/urandom of=${initdir}/var/lib/random-seed \
bs=$poolsize count=1 2> /dev/null
}
remove_cpu_online_rule() {
local file=${initdir}/usr/lib/udev/rules.d/40-redhat.rules
sed -i '/SUBSYSTEM=="cpu"/d' $file
}
kdump_install_systemd_conf() {
local failure_action=$(get_option_value "failure_action")
# Kdump turns out to require longer default systemd mount timeout
# than 1st kernel(90s by default), we use default 300s for kdump.
grep -r "^[[:space:]]*DefaultTimeoutStartSec=" ${initdir}/etc/systemd/system.conf* &>/dev/null
if [ $? -ne 0 ]; then
mkdir -p ${initdir}/etc/systemd/system.conf.d
echo "[Manager]" > ${initdir}/etc/systemd/system.conf.d/kdump.conf
echo "DefaultTimeoutStartSec=300s" >> ${initdir}/etc/systemd/system.conf.d/kdump.conf
fi
# Forward logs to console directly, and don't read Kmsg, this avoids
# unneccessary memory consumption and make console output more useful.
# Only do so for non fadump image.
mkdir -p ${initdir}/etc/systemd/journald.conf.d
echo "[Journal]" > ${initdir}/etc/systemd/journald.conf.d/kdump.conf
echo "Storage=volatile" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf
echo "ReadKMsg=no" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf
echo "ForwardToConsole=yes" >> ${initdir}/etc/systemd/journald.conf.d/kdump.conf
}
install() {
declare -A unique_netifs
local arch _netifs
kdump_module_init
kdump_install_conf
remove_sysctl_conf
# Onlining secondary cpus breaks kdump completely on KVM on Power hosts
# Though we use maxcpus=1 by default but 40-redhat.rules will bring up all
# possible cpus by default. (rhbz1270174 rhbz1266322)
# Thus before we get the kernel fix and the systemd rule fix let's remove
# the cpu online rule in kdump initramfs.
arch=$(uname -m)
if [[ "$arch" = "ppc64le" ]] || [[ "$arch" = "ppc64" ]]; then
remove_cpu_online_rule
fi
if is_ssh_dump_target; then
kdump_install_random_seed
fi
dracut_install -o /etc/adjtime /etc/localtime
inst "$moddir/monitor_dd_progress" "/kdumpscripts/monitor_dd_progress"
chmod +x ${initdir}/kdumpscripts/monitor_dd_progress
inst "/bin/dd" "/bin/dd"
inst "/bin/tail" "/bin/tail"
inst "/bin/date" "/bin/date"
inst "/bin/sync" "/bin/sync"
inst "/bin/cut" "/bin/cut"
inst "/bin/head" "/bin/head"
inst "/sbin/makedumpfile" "/sbin/makedumpfile"
inst "/sbin/vmcore-dmesg" "/sbin/vmcore-dmesg"
inst "/usr/bin/printf" "/sbin/printf"
inst "/usr/bin/logger" "/sbin/logger"
inst "/usr/bin/chmod" "/sbin/chmod"
inst "/lib/kdump/kdump-lib.sh" "/lib/kdump-lib.sh"
inst "/lib/kdump/kdump-lib-initramfs.sh" "/lib/kdump-lib-initramfs.sh"
inst "/lib/kdump/kdump-logger.sh" "/lib/kdump-logger.sh"
inst "$moddir/kdump.sh" "/usr/bin/kdump.sh"
inst "$moddir/kdump-capture.service" "$systemdsystemunitdir/kdump-capture.service"
systemctl -q --root "$initdir" add-wants initrd.target kdump-capture.service
inst "$moddir/kdump-error-handler.sh" "/usr/bin/kdump-error-handler.sh"
inst "$moddir/kdump-error-handler.service" "$systemdsystemunitdir/kdump-error-handler.service"
# Replace existing emergency service and emergency target
cp "$moddir/kdump-emergency.service" "$initdir/$systemdsystemunitdir/emergency.service"
cp "$moddir/kdump-emergency.target" "$initdir/$systemdsystemunitdir/emergency.target"
# Also redirect dracut-emergency to kdump error handler
ln_r "$systemdsystemunitdir/emergency.service" "$systemdsystemunitdir/dracut-emergency.service"
# Check for all the devices and if any device is iscsi, bring up iscsi
# target. Ideally all this should be pushed into dracut iscsi module
# at some point of time.
kdump_check_iscsi_targets
_netifs=$(_get_kdump_netifs)
if [[ -n "$_netifs" ]]; then
kdump_install_nm_netif_allowlist "$_netifs"
kdump_install_nic_driver "$_netifs"
fi
kdump_install_systemd_conf
# For the lvm type target under kdump, in /etc/lvm/lvm.conf we can
# safely replace "reserved_memory=XXXX"(default value is 8192) with
# "reserved_memory=1024" to lower memory pressure under kdump. We do
# it unconditionally here, if "/etc/lvm/lvm.conf" doesn't exist, it
# actually does nothing.
sed -i -e \
's/\(^[[:space:]]*reserved_memory[[:space:]]*=\)[[:space:]]*[[:digit:]]*/\1 1024/' \
${initdir}/etc/lvm/lvm.conf &>/dev/null
# Skip initrd-cleanup.service and initrd-parse-etc.service becasue we don't
# need to switch root. Instead of removing them, we use ConditionPathExists
# to check if /proc/vmcore exists to determine if we are in kdump.
sed -i '/\[Unit\]/a ConditionPathExists=!\/proc\/vmcore' \
"${initdir}/${systemdsystemunitdir}/initrd-cleanup.service" &> /dev/null
sed -i '/\[Unit\]/a ConditionPathExists=!\/proc\/vmcore' \
"${initdir}/${systemdsystemunitdir}/initrd-parse-etc.service" &> /dev/null
# Save more memory by dropping switch root capability
dracut_no_switch_root
}
PK �5�Z-e�
� � # 99kdumpbase/kdump-emergency.servicenu �[��� # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# This service will be placed in kdump initramfs and replace both the systemd
# emergency service and dracut emergency shell. IOW, any emergency will be
# kick this service and in turn isolating to kdump error handler.
[Unit]
Description=Kdump Emergency
DefaultDependencies=no
IgnoreOnIsolate=yes
[Service]
ExecStart=/usr/bin/systemctl --no-block isolate kdump-error-handler.service
Type=oneshot
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
KillMode=process
IgnoreSIGPIPE=no
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
PK �5�Z��n� � ' 99kdumpbase/kdump-error-handler.servicenu �[��� # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# This service will run the real kdump error handler code. Executing the
# failure action configured in kdump.conf
[Unit]
Description=Kdump Error Handler
DefaultDependencies=no
After=systemd-vconsole-setup.service
Wants=systemd-vconsole-setup.service
AllowIsolate=yes
[Service]
Environment=HOME=/
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
WorkingDirectory=/
ExecStart=/bin/kdump-error-handler.sh
Type=oneshot
StandardInput=tty-force
StandardOutput=inherit
StandardError=inherit
KillMode=process
IgnoreSIGPIPE=no
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
PK �5�Z�r��� � " 99kdumpbase/kdump-error-handler.shnu ȯ�� #!/bin/sh
. /lib/kdump-lib-initramfs.sh
set -o pipefail
export PATH=$PATH:$KDUMP_SCRIPT_DIR
get_kdump_confs
do_failure_action
do_final_action
PK �5�Z�L�F� � " 99kdumpbase/kdump-emergency.targetnu �[��� # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Emergency Mode
Documentation=man:systemd.special(7)
Requires=emergency.service
After=emergency.service
AllowIsolate=yes
IgnoreOnIsolate=yes
PK �5�ZP�P� � ! 99kdumpbase/kdump-capture.servicenu �[��� # This file is part of systemd.
#
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
[Unit]
Description=Kdump Vmcore Save Service
After=initrd.target initrd-parse-etc.service sysroot.mount
After=dracut-initqueue.service dracut-pre-mount.service dracut-mount.service dracut-pre-pivot.service
Before=initrd-cleanup.service
ConditionPathExists=/etc/initrd-release
OnFailure=emergency.target
OnFailureJobMode=isolate
[Service]
Environment=DRACUT_SYSTEMD=1
Environment=NEWROOT=/sysroot
Type=oneshot
ExecStart=/bin/kdump.sh
StandardInput=null
StandardOutput=syslog
StandardError=syslog+console
KillMode=process
RemainAfterExit=yes
# Bash ignores SIGTERM, so we send SIGHUP instead, to ensure that bash
# terminates cleanly.
KillSignal=SIGHUP
PK �5�ZZ�~O� � 99kdumpbase/kdump.shnu ȯ�� #!/bin/sh
# continue here only if we have to save dump.
if [ -f /etc/fadump.initramfs ] && [ ! -f /proc/device-tree/rtas/ibm,kernel-dump ] && [ ! -f /proc/device-tree/ibm,opal/dump/mpipl-boot ]; then
exit 0
fi
. /lib/dracut-lib.sh
. /lib/kdump-lib-initramfs.sh
set -o pipefail
DUMP_RETVAL=0
export PATH=$PATH:$KDUMP_SCRIPT_DIR
do_dump()
{
local _ret
eval $DUMP_INSTRUCTION
_ret=$?
if [ $_ret -ne 0 ]; then
derror "saving vmcore failed"
fi
return $_ret
}
do_kdump_pre()
{
local _ret
if [ -n "$KDUMP_PRE" ]; then
"$KDUMP_PRE"
_ret=$?
if [ $_ret -ne 0 ]; then
derror "$KDUMP_PRE exited with $_ret status"
return $_ret
fi
fi
# if any script fails, it just raises warning and continues
if [ -d /etc/kdump/pre.d ]; then
for file in /etc/kdump/pre.d/*; do
"$file"
_ret=$?
if [ $_ret -ne 0 ]; then
derror "$file exited with $_ret status"
fi
done
fi
return 0
}
do_kdump_post()
{
local _ret
if [ -d /etc/kdump/post.d ]; then
for file in /etc/kdump/post.d/*; do
"$file" "$1"
_ret=$?
if [ $_ret -ne 0 ]; then
derror "$file exited with $_ret status"
fi
done
fi
if [ -n "$KDUMP_POST" ]; then
"$KDUMP_POST" "$1"
_ret=$?
if [ $_ret -ne 0 ]; then
derror "$KDUMP_POST exited with $_ret status"
fi
fi
}
add_dump_code()
{
DUMP_INSTRUCTION=$1
}
dump_raw()
{
local _raw=$1
[ -b "$_raw" ] || return 1
dinfo "saving to raw disk $_raw"
if ! $(echo -n $CORE_COLLECTOR|grep -q makedumpfile); then
_src_size=`ls -l /proc/vmcore | cut -d' ' -f5`
_src_size_mb=$(($_src_size / 1048576))
monitor_dd_progress $_src_size_mb &
fi
dinfo "saving vmcore"
$CORE_COLLECTOR /proc/vmcore | dd of=$_raw bs=$DD_BLKSIZE >> /tmp/dd_progress_file 2>&1 || return 1
sync
dinfo "saving vmcore complete"
return 0
}
dump_ssh()
{
local _ret=0
local _exitcode=0 _exitcode2=0
local _opt="-i $1 -o BatchMode=yes -o StrictHostKeyChecking=yes"
local _dir="$KDUMP_PATH/$HOST_IP-$DATEDIR"
local _host=$2
local _vmcore="vmcore"
local _ipv6_addr="" _username=""
dinfo "saving to $_host:$_dir"
cat /var/lib/random-seed > /dev/urandom
ssh -q $_opt $_host mkdir -p $_dir || return 1
save_vmcore_dmesg_ssh ${DMESG_COLLECTOR} ${_dir} "${_opt}" $_host
save_opalcore_ssh ${_dir} "${_opt}" $_host
dinfo "saving vmcore"
if is_ipv6_address "$_host"; then
_username=${_host%@*}
_ipv6_addr="[${_host#*@}]"
fi
if [ "${CORE_COLLECTOR%%[[:blank:]]*}" = "scp" ]; then
if [ -n "$_username" ] && [ -n "$_ipv6_addr" ]; then
scp -q $_opt /proc/vmcore "$_username@$_ipv6_addr:$_dir/vmcore-incomplete"
else
scp -q $_opt /proc/vmcore "$_host:$_dir/vmcore-incomplete"
fi
_exitcode=$?
else
$CORE_COLLECTOR /proc/vmcore | ssh $_opt $_host "umask 0077 && dd bs=512 of=$_dir/vmcore-incomplete"
_exitcode=$?
_vmcore="vmcore.flat"
fi
if [ $_exitcode -eq 0 ]; then
ssh $_opt $_host "mv $_dir/vmcore-incomplete $_dir/$_vmcore"
_exitcode2=$?
if [ $_exitcode2 -ne 0 ]; then
derror "moving vmcore failed, _exitcode:$_exitcode2"
else
dinfo "saving vmcore complete"
fi
else
derror "saving vmcore failed, _exitcode:$_exitcode"
fi
dinfo "saving the $KDUMP_LOG_FILE to $_host:$_dir/"
save_log
if [ -n "$_username" ] && [ -n "$_ipv6_addr" ]; then
scp -q $_opt $KDUMP_LOG_FILE "$_username@$_ipv6_addr:$_dir/"
else
scp -q $_opt $KDUMP_LOG_FILE "$_host:$_dir/"
fi
_ret=$?
if [ $_ret -ne 0 ]; then
derror "saving log file failed, _exitcode:$_ret"
fi
if [ $_exitcode -ne 0 ] || [ $_exitcode2 -ne 0 ];then
return 1
fi
return 0
}
save_opalcore_ssh() {
local _path=$1
local _opts="$2"
local _location=$3
local _user_name="" _ipv6addr=""
ddebug "_path=$_path _opts=$_opts _location=$_location"
if [ ! -f $OPALCORE ]; then
# Check if we are on an old kernel that uses a different path
if [ -f /sys/firmware/opal/core ]; then
OPALCORE="/sys/firmware/opal/core"
else
return 0
fi
fi
if is_ipv6_address "$_host"; then
_user_name=${_location%@*}
_ipv6addr="[${_location#*@}]"
fi
dinfo "saving opalcore:$OPALCORE to $_location:$_path"
if [ -n "$_user_name" ] && [ -n "$_ipv6addr" ]; then
scp $_opts $OPALCORE $_user_name@$_ipv6addr:$_path/opalcore-incomplete
else
scp $_opts $OPALCORE $_location:$_path/opalcore-incomplete
fi
if [ $? -ne 0 ]; then
derror "saving opalcore failed"
return 1
fi
ssh $_opts $_location mv $_path/opalcore-incomplete $_path/opalcore
dinfo "saving opalcore complete"
return 0
}
save_vmcore_dmesg_ssh() {
local _dmesg_collector=$1
local _path=$2
local _opts="$3"
local _location=$4
dinfo "saving vmcore-dmesg.txt to $_location:$_path"
$_dmesg_collector /proc/vmcore | ssh $_opts $_location "umask 0077 && dd of=$_path/vmcore-dmesg-incomplete.txt"
_exitcode=$?
if [ $_exitcode -eq 0 ]; then
ssh -q $_opts $_location mv $_path/vmcore-dmesg-incomplete.txt $_path/vmcore-dmesg.txt
dinfo "saving vmcore-dmesg.txt complete"
else
derror "saving vmcore-dmesg.txt failed"
fi
}
get_host_ip()
{
local _host
if is_nfs_dump_target || is_ssh_dump_target
then
kdumpnic=$(getarg kdumpnic=)
[ -z "$kdumpnic" ] && derror "failed to get kdumpnic!" && return 1
_host=`ip addr show dev $kdumpnic|grep '[ ]*inet'`
[ $? -ne 0 ] && derror "wrong kdumpnic: $kdumpnic" && return 1
_host=`echo $_host | head -n 1 | cut -d' ' -f2`
_host="${_host%%/*}"
[ -z "$_host" ] && derror "wrong kdumpnic: $kdumpnic" && return 1
HOST_IP=$_host
fi
return 0
}
read_kdump_conf()
{
if [ ! -f "$KDUMP_CONF" ]; then
derror "$KDUMP_CONF not found"
return
fi
get_kdump_confs
# rescan for add code for dump target
while read config_opt config_val;
do
# remove inline comments after the end of a directive.
case "$config_opt" in
dracut_args)
config_val=$(get_dracut_args_target "$config_val")
if [ -n "$config_val" ]; then
config_val=$(get_mntpoint_from_target "$config_val")
add_dump_code "dump_fs $config_val"
fi
;;
ext[234]|xfs|btrfs|minix|nfs)
config_val=$(get_mntpoint_from_target "$config_val")
add_dump_code "dump_fs $config_val"
;;
raw)
add_dump_code "dump_raw $config_val"
;;
ssh)
add_dump_code "dump_ssh $SSH_KEY_LOCATION $config_val"
;;
esac
done <<< "$(read_strip_comments $KDUMP_CONF)"
}
fence_kdump_notify()
{
if [ -n "$FENCE_KDUMP_NODES" ]; then
$FENCE_KDUMP_SEND $FENCE_KDUMP_ARGS $FENCE_KDUMP_NODES &
fi
}
read_kdump_conf
fence_kdump_notify
get_host_ip
if [ $? -ne 0 ]; then
derror "get_host_ip exited with non-zero status!"
exit 1
fi
if [ -z "$DUMP_INSTRUCTION" ]; then
add_dump_code "dump_fs $NEWROOT"
fi
do_kdump_pre
if [ $? -ne 0 ]; then
derror "kdump_pre script exited with non-zero status!"
do_final_action
# During systemd service to reboot the machine, stop this shell script running
exit 1
fi
make_trace_mem "kdump saving vmcore" '1:shortmem' '2+:mem' '3+:slab'
do_dump
DUMP_RETVAL=$?
do_kdump_post $DUMP_RETVAL
if [ $? -ne 0 ]; then
derror "kdump_post script exited with non-zero status!"
fi
if [ $DUMP_RETVAL -ne 0 ]; then
exit 1
fi
do_final_action
PK �5�Z����U U 90btrfs/btrfs_finished.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
btrfs_check_complete() {
local _rootinfo _dev
_dev="${1:-/dev/root}"
[ -e "$_dev" ] || return 0
_rootinfo=$(udevadm info --query=env "--name=$_dev" 2>/dev/null)
if strstr "$_rootinfo" "ID_FS_TYPE=btrfs"; then
info "Checking, if btrfs device complete"
unset __btrfs_mount
mount -o ro "$_dev" /tmp >/dev/null 2>&1
__btrfs_mount=$?
[ $__btrfs_mount -eq 0 ] && umount "$_dev" >/dev/null 2>&1
return $__btrfs_mount
fi
return 0
}
btrfs_check_complete $1
exit $?
PK �5�ZJN3W� � 90btrfs/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
local _rootdev
# if we don't have btrfs installed on the host system,
# no point in trying to support it in the initramfs.
require_binaries btrfs || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ "$fs" == "btrfs" ]] && return 0
done
return 255
}
return 0
}
# called by dracut
depends() {
echo udev-rules
return 0
}
# called by dracut
installkernel() {
instmods btrfs
# Make sure btfs can use fast crc32c implementations where available (bsc#1011554)
instmods crc32c-intel
}
# called by dracut
install() {
if ! inst_rules 64-btrfs.rules; then
inst_rules "$moddir/80-btrfs.rules"
case "$(btrfs --help)" in
*device\ ready*)
inst_script "$moddir/btrfs_device_ready.sh" /sbin/btrfs_finished ;;
*)
inst_script "$moddir/btrfs_finished.sh" /sbin/btrfs_finished ;;
esac
fi
if ! dracut_module_included "systemd"; then
inst_hook initqueue/timeout 10 "$moddir/btrfs_timeout.sh"
fi
inst_multiple -o btrfsck btrfs-zero-log
inst $(command -v btrfs) /sbin/btrfs
}
PK �5�Z9� 90btrfs/80-btrfs.rulesnu �[��� SUBSYSTEM!="block", GOTO="btrfs_end"
ACTION!="add|change", GOTO="btrfs_end"
ENV{ID_FS_TYPE}!="btrfs", GOTO="btrfs_end"
RUN+="/sbin/btrfs device scan $env{DEVNAME}"
RUN+="/sbin/initqueue --finished --unique --name btrfs_finished /sbin/btrfs_finished"
LABEL="btrfs_end"
PK �5�Z��]� � 90btrfs/btrfs_device_ready.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
btrfs_check_complete() {
local _rootinfo _dev
_dev="${1:-/dev/root}"
[ -e "$_dev" ] || return 0
_rootinfo=$(udevadm info --query=env "--name=$_dev" 2>/dev/null)
if strstr "$_rootinfo" "ID_FS_TYPE=btrfs"; then
info "Checking, if btrfs device complete"
btrfs device ready "$_dev" >/dev/null 2>&1
return $?
fi
return 0
}
btrfs_check_complete $1
exit $?
PK �5�Z`�ю � 90btrfs/btrfs_timeout.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
info "Scanning for all btrfs devices"
/sbin/btrfs device scan >/dev/null 2>&1
PK �5�Z[ �
95nfs/parse-nfsroot.shnu ȯ�� #!/bin/sh
#
# Preferred format:
# root=nfs[4]:[server:]path[:options]
#
# This syntax can come from DHCP root-path as well.
#
# Legacy format:
# root=/dev/nfs nfsroot=[server:]path[,options]
#
# In Legacy root=/dev/nfs mode, if the 'nfsroot' parameter is not given
# on the command line or is empty, the dhcp root-path is used as
# [server:]path[:options] or the default "/tftpboot/%s" will be used.
#
# If server is unspecified it will be pulled from one of the following
# sources, in order:
# static ip= option on kernel command line
# DHCP next-server option
# DHCP server-id option
# DHCP root-path option
#
# NFSv4 is only used if explicitly requested with nfs4: prefix, otherwise
# NFSv3 is used.
#
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
# This script is sourced, so root should be set. But let's be paranoid
[ -z "$root" ] && root=$(getarg root=)
[ -z "$nfsroot" ] && nfsroot=$(getarg nfsroot=)
[ -n "$netroot" ] && oldnetroot="$netroot"
# netroot= cmdline argument must be ignored, but must be used if
# we're inside netroot to parse dhcp root-path
if [ -n "$netroot" ] ; then
for n in $(getargs netroot=); do
[ "$n" = "$netroot" ] && break
done
if [ "$n" = "$netroot" ]; then
#warn "Ignoring netroot argument for NFS"
netroot=$root
fi
else
netroot=$root;
fi
# LEGACY: nfsroot= is valid only if root=/dev/nfs
if [ -n "$nfsroot" ] ; then
# @deprecated
warn "Argument nfsroot is deprecated and might be removed in a future release. See 'man dracut.kernel' for more information."
if [ "$(getarg root=)" != "/dev/nfs" ]; then
die "Argument nfsroot only accepted for legacy root=/dev/nfs"
fi
netroot=nfs:$nfsroot;
fi
case "$netroot" in
/dev/nfs) netroot=nfs;;
/dev/*)
if [ -n "$oldnetroot" ]; then
netroot="$oldnetroot"
else
unset netroot
fi
return
;;
# LEGACY: root=<server-ip>:/<path
[0-9]*:/*|[0-9]*\.[0-9]*\.[0-9]*[!:]|/*)
netroot=nfs:$netroot;;
esac
# Continue if nfs
case "${netroot%%:*}" in
nfs|nfs4|/dev/nfs);;
*)
if [ -n "$oldnetroot" ]; then
netroot="$oldnetroot"
else
unset netroot
fi
return
;;
esac
# Check required arguments
if nfsdomain=$(getarg rd.nfs.domain -d rd_NFS_DOMAIN); then
if [ -f /etc/idmapd.conf ]; then
sed -i -e \
"s/^[[:space:]#]*Domain[[:space:]]*=.*/Domain = $nfsdomain/g" \
/etc/idmapd.conf
fi
# and even again after the sed, in case it was not yet specified
echo "Domain = $nfsdomain" >> /etc/idmapd.conf
fi
nfsroot_to_var $netroot
[ "$path" = "error" ] && die "Argument nfsroot must contain a valid path!"
# Set fstype, might help somewhere
fstype=${nfs#/dev/}
# Rewrite root so we don't have to parse this uglyness later on again
netroot="$fstype:$server:$path:$options"
# If we don't have a server, we need dhcp
if [ -z "$server" ] ; then
DHCPORSERVER="1"
fi;
# Done, all good!
rootok=1
# Shut up init error check or make sure that block parser wont get
# confused by having /dev/nfs[4]
root="$fstype"
echo '[ -e $NEWROOT/proc ]' > $hookdir/initqueue/finished/nfsroot.sh
mkdir -p /var/lib/rpcbind
chown rpc:rpc /var/lib/rpcbind
chmod 770 /var/lib/rpcbind
PK �5�Z�C��, , 95nfs/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
# If our prerequisites are not met, fail anyways.
require_any_binary rpcbind portmap || return 1
require_binaries rpc.statd mount.nfs mount.nfs4 umount || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ "$fs" == "nfs" ]] && return 0
[[ "$fs" == "nfs3" ]] && return 0
[[ "$fs" == "nfs4" ]] && return 0
done
return 255
}
return 0
}
# called by dracut
depends() {
# We depend on network modules being loaded
echo network
}
# called by dracut
installkernel() {
hostonly='' instmods =net/sunrpc =fs/nfs ipv6 nfs_acl nfs_layout_nfsv41_files
}
cmdline() {
local nfs_device
local nfs_options
local nfs_root
local nfs_address
local lookup
local ifname
### nfsroot= ###
nfs_device=$(findmnt -t nfs4 -n -o SOURCE /)
if [ -n "$nfs_device" ];then
nfs_root="root=nfs4:$nfs_device"
else
nfs_device=$(findmnt -t nfs -n -o SOURCE /)
[ -z "$nfs_device" ] && return
nfs_root="root=nfs:$nfs_device"
fi
nfs_options=$(findmnt -t nfs4,nfs -n -o OPTIONS /)
[ -n "$nfs_options" ] && nfs_root="$nfs_root:$nfs_options"
echo "$nfs_root"
### ip= ###
if [[ $nfs_device = [0-9]*\.[0-9]*\.[0-9]*.[0-9]* ]] || [[ $nfs_device = \[.*\] ]]; then
nfs_address="${nfs_device%%:*}"
else
lookup=$(host "${nfs_device%%:*}"| grep " address " | head -n1)
nfs_address=${lookup##* }
fi
ifname=$(ip -o route get to $nfs_address | sed -n 's/.*dev \([^ ]*\).*/\1/p')
if [ -d /sys/class/net/$ifname/bonding ]; then
dinfo "Found bonded interface '${ifname}'. Make sure to provide an appropriate 'bond=' cmdline."
return
elif [ -e /sys/class/net/$ifname/address ] ; then
ifmac=$(cat /sys/class/net/$ifname/address)
printf 'ifname=%s:%s ' ${ifname} ${ifmac}
fi
printf 'ip=%s:static\n' ${ifname}
}
# called by dracut
install() {
local _i
local _nsslibs
inst_multiple -o portmap rpcbind rpc.statd mount.nfs \
mount.nfs4 umount rpc.idmapd sed /etc/netconfig chmod "$tmpfilesdir/rpcbind.conf"
inst_multiple /etc/services /etc/nsswitch.conf /etc/rpc /etc/protocols /etc/idmapd.conf
if [[ $hostonly_cmdline == "yes" ]]; then
local _netconf="$(cmdline)"
[[ $_netconf ]] && printf "%s\n" "$_netconf" >> "${initdir}/etc/cmdline.d/95nfs.conf"
fi
if [ -f /lib/modprobe.d/nfs.conf ]; then
inst_multiple /lib/modprobe.d/nfs.conf
else
[ -d $initdir/etc/modprobe.d/ ] || mkdir $initdir/etc/modprobe.d
echo "alias nfs4 nfs" > $initdir/etc/modprobe.d/nfs.conf
fi
inst_libdir_file 'libnfsidmap_nsswitch.so*' 'libnfsidmap/*.so' 'libnfsidmap*.so*'
_nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
| tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
_nsslibs=${_nsslibs#|}
_nsslibs=${_nsslibs%|}
inst_libdir_file -n "$_nsslibs" 'libnss_*.so*'
inst_hook cmdline 90 "$moddir/parse-nfsroot.sh"
inst_hook pre-udev 99 "$moddir/nfs-start-rpc.sh"
inst_hook cleanup 99 "$moddir/nfsroot-cleanup.sh"
inst "$moddir/nfsroot.sh" "/sbin/nfsroot"
inst "$moddir/nfs-lib.sh" "/lib/nfs-lib.sh"
mkdir -m 0755 -p "$initdir/var/lib/nfs/rpc_pipefs"
mkdir -m 0770 -p "$initdir/var/lib/rpcbind"
[ -d "$dracutsysrootdir/var/lib/nfs/statd/sm" ] && \
mkdir -m 0700 -p "$initdir/var/lib/nfs/statd" && \
mkdir -m 0755 -p "$initdir/var/lib/nfs/statd/sm" && \
chown -R rpcuser:rpcuser "$initdir/var/lib/nfs/statd"
[ -d "$dracutsysrootdir/var/lib/nfs/sm" ] && \
mkdir -m 0755 -p "$initdir/var/lib/nfs/sm" &&
chown -R rpcuser:rpcuser "$initdir/var/lib/nfs/sm"
# Rather than copy the passwd file in, just set a user for rpcbind
# We'll save the state and restart the daemon from the root anyway
grep -E '^nfsnobody:|^rpc:|^rpcuser:' /etc/passwd >> "$initdir/etc/passwd"
grep -E '^nogroup:|^rpc:|^nobody:' /etc/group >> "$initdir/etc/group"
# rpc user needs to be able to write to this directory to save the warmstart
# file
chmod 770 "$initdir/var/lib/rpcbind"
grep -q '^rpc:' /etc/passwd \
&& grep -q '^rpc:' /etc/group
dracut_need_initqueue
}
PK �5�Z^%f f 95nfs/nfs-start-rpc.shnu ȯ�� #!/bin/sh
if modprobe sunrpc || strstr "$(cat /proc/filesystems)" rpc_pipefs; then
[ ! -d /var/lib/nfs/rpc_pipefs/nfs ] && \
mount -t rpc_pipefs rpc_pipefs /var/lib/nfs/rpc_pipefs
# Start rpcbind or rpcbind
# FIXME occasionally saw 'rpcbind: fork failed: No such device' -- why?
command -v portmap >/dev/null && [ -z "$(pidof portmap)" ] && portmap
if command -v rpcbind >/dev/null && [ -z "$(pidof rpcbind)" ]; then
mkdir -p /run/rpcbind
rpcbind
fi
# Start rpc.statd as mount won't let us use locks on a NFSv4
# filesystem without talking to it. NFSv4 does locks internally,
# rpc.lockd isn't needed
[ -z "$(pidof rpc.statd)" ] && rpc.statd
[ -z "$(pidof rpc.idmapd)" ] && rpc.idmapd
else
warn 'Kernel module "sunrpc" not in the initramfs, or support for filesystem "rpc_pipefs" missing!'
fi
PK �5�Z ɕ�$ $ 95nfs/nfs-lib.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
. /lib/net-lib.sh
# TODO: make these things not pollute the calling namespace
# nfs_to_var NFSROOT [NETIF]
# use NFSROOT to set $nfs, $server, $path, and $options.
# NFSROOT is something like: nfs[4]:<server>:/<path>[:<options>|,<options>]
# NETIF is used to get information from DHCP options, if needed.
nfs_to_var() {
# Unfortunately, there's multiple styles of nfs "URL" in use, so we need
# extra functions to parse them into $nfs, $server, $path, and $options.
# FIXME: local netif=${2:-$netif}?
case "$1" in
nfs://*) rfc2224_nfs_to_var "$1" ;;
nfs:*[*) anaconda_nfsv6_to_var "$1" ;;
nfs:*:*:/*) anaconda_nfs_to_var "$1" ;;
*) nfsroot_to_var "$1" ;;
esac
# if anything's missing, try to fill it in from DHCP options
if [ -z "$server" ] || [ -z "$path" ]; then nfsroot_from_dhcp $2; fi
# if there's a "%s" in the path, replace it with the hostname/IP
if strstr "$path" "%s"; then
local node=""
read node < /proc/sys/kernel/hostname
[ "$node" = "(none)" ] && node=$(get_ip $2)
path=${path%%%s*}$node${path#*%s} # replace only the first %s
fi
}
# root=nfs:[<server-ip>:]<root-dir>[:<nfs-options>]
# root=nfs4:[<server-ip>:]<root-dir>[:<nfs-options>]
nfsroot_to_var() {
# strip nfs[4]:
local arg="$@:"
nfs="${arg%%:*}"
arg="${arg##$nfs:}"
# check if we have a server
if strstr "$arg" ':/' ; then
server="${arg%%:/*}"
arg="/${arg##*:/}"
fi
path="${arg%%:*}"
# rest are options
options="${arg##$path}"
# strip leading ":"
options="${options##:}"
# strip ":"
options="${options%%:}"
# Does it really start with '/'?
[ -n "${path%%/*}" ] && path="error";
#Fix kernel legacy style separating path and options with ','
if [ "$path" != "${path#*,}" ] ; then
options=${path#*,}
path=${path%%,*}
fi
}
# RFC2224: nfs://<server>[:<port>]/<path>
rfc2224_nfs_to_var() {
nfs="nfs"
server="${1#nfs://}"
path="/${server#*/}"
server="${server%%/*}"
server="${server%%:}" # anaconda compat (nfs://<server>:/<path>)
local port="${server##*:}"
[ "$port" != "$server" ] && options="port=$port"
}
# Anaconda-style path with options: nfs:<options>:<server>:/<path>
# (without mount options, anaconda is the same as dracut)
anaconda_nfs_to_var() {
nfs="nfs"
options="${1#nfs:}"
server="${options#*:}"
server="${server%:/*}"
options="${options%%:*}"
path="/${1##*:/}"
}
# IPv6 nfs path will be treated separately
anaconda_nfsv6_to_var() {
nfs="nfs"
path="$1"
options="${path#*:/}"
path="/${options%%:*}"
server="${1#*nfs:}"
if str_starts $server '['; then
server="${server%:/*}"
options="${options#*:*}"
else
server="${server%:/*}"
options="${server%%:*}"
server="${server#*:}"
fi
}
# nfsroot_from_dhcp NETIF
# fill in missing server/path from DHCP options.
nfsroot_from_dhcp() {
local f
for f in /tmp/net.$1.override /tmp/dhclient.$1.dhcpopts; do
[ -f $f ] && . $f
done
[ -n "$new_root_path" ] && nfsroot_to_var "$nfs:$new_root_path"
[ -z "$path" ] && [ "$(getarg root=)" = "/dev/nfs" ] && path=/tftpboot/%s
[ -z "$server" ] && server=$srv
[ -z "$server" ] && server=$new_next_server
[ -z "$server" ] && server=$new_dhcp_server_identifier
[ -z "$server" ] && server=${new_root_path%%:*}
}
# Look through $options, fix "rw"/"ro", move "lock"/"nolock" to $nfslock
munge_nfs_options() {
local f="" flags="" nfsrw="ro" OLDIFS="$IFS"
IFS=,
for f in $options; do
case $f in
ro|rw) nfsrw=$f ;;
lock|nolock) nfslock=$f ;;
*) flags=${flags:+$flags,}$f ;;
esac
done
IFS="$OLDIFS"
# Override rw/ro if set on cmdline
getarg ro >/dev/null && nfsrw=ro
getarg rw >/dev/null && nfsrw=rw
options=$nfsrw${flags:+,$flags}
}
# mount_nfs NFSROOT MNTDIR [NETIF]
mount_nfs() {
local nfsroot="$1" mntdir="$2" netif="$3"
local nfs="" server="" path="" options=""
nfs_to_var "$nfsroot" $netif
munge_nfs_options
if [ "$nfs" = "nfs4" ]; then
options=$options${nfslock:+,$nfslock}
else
# NFSv{2,3} doesn't support using locks as it requires a helper to
# transfer the rpcbind state to the new root
[ "$nfslock" = "lock" ] \
&& warn "Locks unsupported on NFSv{2,3}, using nolock" 1>&2
options=$options,nolock
fi
mount -t $nfs -o$options "$server:$path" "$mntdir"
}
PK �5�ZZ�M M 95nfs/nfsroot-cleanup.shnu ȯ�� #!/bin/sh
type incol2 >/dev/null 2>&1 || . /lib/dracut-lib.sh
[ -f /tmp/nfs.rpc_pipefs_path ] && rpcpipefspath=`cat /tmp/nfs.rpc_pipefs_path`
[ -z "$rpcpipefspath" ] && rpcpipefspath=var/lib/nfs/rpc_pipefs
pid=$(pidof rpc.statd)
[ -n "$pid" ] && kill $pid
pid=$(pidof rpc.idmapd)
[ -n "$pid" ] && kill $pid
pid=$(pidof rpcbind)
[ -n "$pid" ] && kill $pid
if incol2 /proc/mounts /var/lib/nfs/rpc_pipefs; then
# try to create the destination directory
[ -d $NEWROOT/$rpcpipefspath ] || \
mkdir -m 0755 -p $NEWROOT/$rpcpipefspath 2>/dev/null
if [ -d $NEWROOT/$rpcpipefspath ]; then
# mount --move does not seem to work???
mount --bind /var/lib/nfs/rpc_pipefs $NEWROOT/$rpcpipefspath
umount /var/lib/nfs/rpc_pipefs 2>/dev/null
else
umount /var/lib/nfs/rpc_pipefs 2>/dev/null
fi
fi
PK �5�Z���� � 95nfs/nfsroot.shnu ȯ�� #!/bin/sh
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
. /lib/nfs-lib.sh
[ "$#" = 3 ] || exit 1
# root is in the form root=nfs[4]:[server:]path[:options], either from
# cmdline or dhcp root-path
netif="$1"
root="$2"
NEWROOT="$3"
nfs_to_var $root $netif
[ -z "$server" ] && die "Required parameter 'server' is missing"
mount_nfs $root $NEWROOT $netif && { [ -e /dev/root ] || ln -s null /dev/root ; [ -e /dev/nfs ] || ln -s null /dev/nfs; }
[ -f $NEWROOT/etc/fstab ] && cat $NEWROOT/etc/fstab > /dev/null
# inject new exit_if_exists
echo 'settle_exit_if_exists="--exit-if-exists=/dev/root"; rm -- "$job"' > $hookdir/initqueue/nfs.sh
# force udevsettle to break
> $hookdir/initqueue/work
need_shutdown
PK �5�Z& ��P P 30convertfs/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
[[ $mount_needs ]] && return 1
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_multiple bash find ldconfig mv rm cp ln
inst_hook pre-pivot 99 "$moddir/do-convertfs.sh"
inst_script "$moddir/convertfs.sh" /usr/bin/convertfs
}
PK �5�Z%�C� � 30convertfs/convertfs.shnu ȯ�� #!/bin/bash
ROOT="$1"
if [[ ! -d "$ROOT" ]]; then
echo "Usage: $0 <rootdir>"
exit 1
fi
if [[ "$ROOT" -ef / ]]; then
echo "Can't convert the running system."
echo "Please boot with 'rd.convertfs' on the kernel command line,"
echo "to update with the help of the initramfs,"
echo "or run this script from a rescue system."
exit 1
fi
while [[ "$ROOT" != "${ROOT%/}" ]]; do
ROOT=${ROOT%/}
done
if [ ! -L $ROOT/var/run -a -e $ROOT/var/run ]; then
echo "Converting /var/run to symlink"
mv -f $ROOT/var/run $ROOT/var/run.runmove~
ln -sfn ../run $ROOT/var/run
fi
if [ ! -L $ROOT/var/lock -a -e $ROOT/var/lock ]; then
echo "Converting /var/lock to symlink"
mv -f $ROOT/var/lock $ROOT/var/lock.lockmove~
ln -sfn ../run/lock $ROOT/var/lock
fi
needconvert() {
for dir in "$ROOT/bin" "$ROOT/sbin" "$ROOT/lib" "$ROOT/lib64"; do
if [[ -e "$dir" ]]; then
[[ -L "$dir" ]] || return 0
fi
done
return 1
}
if ! [ -e "$ROOT/usr/bin" ]; then
echo "$ROOT/usr/bin does not exist!"
echo "Make sure, the kernel command line has enough information"
echo "to mount /usr (man dracut.cmdline)"
exit 1
fi
if ! needconvert; then
echo "Your system is already converted."
exit 0
fi
testfile="$ROOT/.usrmovecheck$$"
rm -f -- "$testfile"
> "$testfile"
if [[ ! -e "$testfile" ]]; then
echo "Cannot write to $ROOT/"
exit 1
fi
rm -f -- "$testfile"
testfile="$ROOT/usr/.usrmovecheck$$"
rm -f -- "$testfile"
> "$testfile"
if [[ ! -e "$testfile" ]]; then
echo "Cannot write to $ROOT/usr/"
exit 1
fi
rm -f -- "$testfile"
find_mount() {
local dev mnt etc wanted_dev
wanted_dev="$(readlink -e -q $1)"
while read dev mnt etc || [ -n "$dev" ]; do
[ "$dev" = "$wanted_dev" ] && echo "$dev" && return 0
done < /proc/mounts
return 1
}
# usage: ismounted <mountpoint>
# usage: ismounted /dev/<device>
if command -v findmnt >/dev/null; then
ismounted() {
findmnt "$1" > /dev/null 2>&1
}
else
ismounted() {
if [ -b "$1" ]; then
find_mount "$1" > /dev/null && return 0
return 1
fi
while read a m a || [ -n "$m" ]; do
[ "$m" = "$1" ] && return 0
done < /proc/mounts
return 1
}
fi
# clean up after ourselves no matter how we die.
cleanup() {
echo "Something failed. Move back to the original state"
for dir in "$ROOT/bin" "$ROOT/sbin" "$ROOT/lib" "$ROOT/lib64" \
"$ROOT/usr/bin" "$ROOT/usr/sbin" "$ROOT/usr/lib" \
"$ROOT/usr/lib64"; do
[[ -d "${dir}.usrmove-new" ]] && rm -fr -- "${dir}.usrmove-new"
if [[ -d "${dir}.usrmove-old" ]]; then
mv "$dir" "${dir}.del~"
mv "${dir}.usrmove-old" "$dir"
rm -fr -- "${dir}.del~"
fi
done
}
trap 'ret=$?; [[ $ret -ne 0 ]] && cleanup;exit $ret;' EXIT
trap 'exit 1;' SIGINT
ismounted "$ROOT/usr" || CP_HARDLINK="-l"
set -e
# merge / and /usr in new dir in /usr
for dir in bin sbin lib lib64; do
rm -rf -- "$ROOT/usr/${dir}.usrmove-new"
[[ -L "$ROOT/$dir" ]] && continue
[[ -d "$ROOT/$dir" ]] || continue
echo "Make a copy of \`$ROOT/usr/$dir'."
[[ -d "$ROOT/usr/$dir" ]] \
&& cp -ax -l "$ROOT/usr/$dir" "$ROOT/usr/${dir}.usrmove-new"
echo "Merge the copy with \`$ROOT/$dir'."
[[ -d "$ROOT/usr/${dir}.usrmove-new" ]] \
|| mkdir -p "$ROOT/usr/${dir}.usrmove-new"
cp -axT $CP_HARDLINK --backup --suffix=.usrmove~ "$ROOT/$dir" "$ROOT/usr/${dir}.usrmove-new"
echo "Clean up duplicates in \`$ROOT/usr/$dir'."
# delete all symlinks that have been backed up
find "$ROOT/usr/${dir}.usrmove-new" -type l -name '*.usrmove~' -delete || :
# replace symlink with backed up binary
find "$ROOT/usr/${dir}.usrmove-new" \
-name '*.usrmove~' \
-type f \
-exec bash -c 'p="{}";o=${p%%%%.usrmove~};
[[ -L "$o" ]] && mv -f "$p" "$o"' ';' || :
done
# switch over merged dirs in /usr
for dir in bin sbin lib lib64; do
[[ -d "$ROOT/usr/${dir}.usrmove-new" ]] || continue
echo "Switch to new \`$ROOT/usr/$dir'."
rm -fr -- "$ROOT/usr/${dir}.usrmove-old"
mv "$ROOT/usr/$dir" "$ROOT/usr/${dir}.usrmove-old"
mv "$ROOT/usr/${dir}.usrmove-new" "$ROOT/usr/$dir"
done
# replace dirs in / with links to /usr
for dir in bin sbin lib lib64; do
[[ -L "$ROOT/$dir" ]] && continue
[[ -d "$ROOT/$dir" ]] || continue
echo "Create \`$ROOT/$dir' symlink."
rm -fr -- "$ROOT/${dir}.usrmove-old" || :
mv "$ROOT/$dir" "$ROOT/${dir}.usrmove-old"
ln -sfn usr/$dir "$ROOT/$dir"
done
echo "Clean up backup files."
# everything seems to work; cleanup
for dir in bin sbin lib lib64; do
# if we get killed in the middle of "rm -rf", ensure not to leave
# an incomplete directory, which is moved back by cleanup()
[[ -d "$ROOT/usr/${dir}.usrmove-old" ]] \
&& mv "$ROOT/usr/${dir}.usrmove-old" "$ROOT/usr/${dir}.usrmove-old~"
[[ -d "$ROOT/${dir}.usrmove-old" ]] \
&& mv "$ROOT/${dir}.usrmove-old" "$ROOT/${dir}.usrmove-old~"
done
for dir in bin sbin lib lib64; do
[[ -d "$ROOT/usr/${dir}.usrmove-old~" ]] \
&& rm -rf -- "$ROOT/usr/${dir}.usrmove-old~" || :
[[ -d "$ROOT/${dir}.usrmove-old~" ]] \
&& rm -rf -- "$ROOT/${dir}.usrmove-old~" || :
done
for dir in lib lib64; do
[[ -d "$ROOT/$dir" ]] || continue
for lib in "$ROOT"/usr/${dir}/lib*.so*.usrmove~; do
[[ -f $lib ]] || continue
mv $lib ${lib/.so/_so}
done
done
set +e
echo "Run ldconfig."
ldconfig -r "$ROOT"
. $ROOT/etc/selinux/config
if [ -n "$(command -v setfiles)" ] && [ "$SELINUX" != "disabled" ] && [ -f /etc/selinux/${SELINUXTYPE}/contexts/files/file_contexts ]; then
echo "Fixing SELinux labels"
setfiles -r $ROOT -p /etc/selinux/${SELINUXTYPE}/contexts/files/file_contexts $ROOT/sbin $ROOT/bin $ROOT/lib $ROOT/lib64 $ROOT/usr/lib $ROOT/usr/lib64 $ROOT/etc/ld.so.cache $ROOT/var/cache/ldconfig || :
fi
echo "Done."
exit 0
PK �5�ZQ5�� � 30convertfs/do-convertfs.shnu ȯ�� #!/bin/bash
if getargbool 0 rd.convertfs; then
if getargbool 0 rd.debug; then
bash -x convertfs "$NEWROOT" 2>&1 | vinfo
else
convertfs "$NEWROOT" 2>&1 | vinfo
fi
fi
PK �5�Z˺�� � 90lvm/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
# No point trying to support lvm if the binaries are missing
require_binaries lvm || return 1
[[ $hostonly ]] || [[ $mount_needs ]] && {
for fs in "${host_fs_types[@]}"; do
[[ $fs = LVM*_member ]] && return 0
done
return 255
}
return 0
}
# called by dracut
depends() {
# We depend on dm_mod being loaded
echo rootfs-block dm
return 0
}
# called by dracut
cmdline() {
local _activated
declare -A _activated
for dev in "${!host_fs_types[@]}"; do
[ -e /sys/block/${dev#/dev/}/dm/name ] || continue
[ -e /sys/block/${dev#/dev/}/dm/uuid ] || continue
uuid=$(</sys/block/${dev#/dev/}/dm/uuid)
[[ "${uuid#LVM-}" == "$uuid" ]] && continue
dev=$(</sys/block/${dev#/dev/}/dm/name)
eval $(dmsetup splitname --nameprefixes --noheadings --rows "$dev" 2>/dev/null)
[[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || return 1
if ! [[ ${_activated[${DM_VG_NAME}/${DM_LV_NAME}]} ]]; then
printf " rd.lvm.lv=%s\n" "${DM_VG_NAME}/${DM_LV_NAME} "
_activated["${DM_VG_NAME}/${DM_LV_NAME}"]=1
fi
done
}
installkernel() {
hostonly='' instmods dm-snapshot
}
# called by dracut
install() {
local _i
inst lvm
if [[ $hostonly_cmdline == "yes" ]]; then
local _lvmconf=$(cmdline)
[[ $_lvmconf ]] && printf "%s\n" "$_lvmconf" >> "${initdir}/etc/cmdline.d/90lvm.conf"
fi
inst_rules "$moddir/64-lvm.rules"
if [[ $hostonly ]] || [[ $lvmconf = "yes" ]]; then
if [ -f /etc/lvm/lvm.conf ]; then
inst_simple -H /etc/lvm/lvm.conf
# FIXME: near-term hack to establish read-only locking;
# use command-line lvm.conf editor once it is available
sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 4/' ${initdir}/etc/lvm/lvm.conf
sed -i -e 's/\(^[[:space:]]*\)use_lvmetad[[:space:]]*=[[:space:]]*[[:digit:]]/\1use_lvmetad = 0/' ${initdir}/etc/lvm/lvm.conf
fi
export LVM_SUPPRESS_FD_WARNINGS=1
# Also install any files needed for LVM system id support.
if [ -f /etc/lvm/lvmlocal.conf ]; then
inst_simple -H /etc/lvm/lvmlocal.conf
fi
eval $(lvm dumpconfig global/system_id_source &>/dev/null)
if [ "$system_id_source" == "file" ]; then
eval $(lvm dumpconfig global/system_id_file)
if [ -f "$system_id_file" ]; then
inst_simple -H $system_id_file
fi
fi
unset LVM_SUPPRESS_FD_WARNINGS
fi
if ! [[ -e ${initdir}/etc/lvm/lvm.conf ]]; then
mkdir -p "${initdir}/etc/lvm"
{
echo 'global {'
echo 'locking_type = 4'
echo 'use_lvmetad = 0'
echo '}'
} > "${initdir}/etc/lvm/lvm.conf"
fi
inst_rules 11-dm-lvm.rules 69-dm-lvm-metad.rules
# Do not run lvmetad update via pvscan in udev rule - lvmetad is not running yet in dracut!
if [[ -f ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules ]]; then
if grep -q SYSTEMD_WANTS ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules; then
sed -i -e 's/^ENV{SYSTEMD_ALIAS}=.*/# No LVM pvscan in dracut - lvmetad is not running yet/' \
${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules
sed -i -e 's/^ENV{ID_MODEL}=.*//' ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules
sed -i -e 's/^ENV{SYSTEMD_WANTS}=.*//' ${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules
else
sed -i -e 's/.*lvm pvscan.*/# No LVM pvscan for in dracut - lvmetad is not running yet/' \
${initdir}/lib/udev/rules.d/69-dm-lvm-metad.rules
fi
fi
# Gentoo ebuild for LVM2 prior to 2.02.63-r1 doesn't install above rules
# files, but provides the one below:
inst_rules 64-device-mapper.rules
# debian udev rules
inst_rules 56-lvm.rules 60-persistent-storage-lvm.rules
inst_script "$moddir/lvm_scan.sh" /sbin/lvm_scan
inst_hook cmdline 30 "$moddir/parse-lvm.sh"
inst_libdir_file "libdevmapper-event-lvm*.so"
if [[ $hostonly ]] && find_binary lvs &>/dev/null; then
for dev in "${!host_fs_types[@]}"; do
[ -e /sys/block/${dev#/dev/}/dm/name ] || continue
dev=$(</sys/block/${dev#/dev/}/dm/name)
eval $(dmsetup splitname --nameprefixes --noheadings --rows "$dev" 2>/dev/null)
[[ ${DM_VG_NAME} ]] && [[ ${DM_LV_NAME} ]] || continue
case "$(lvs --noheadings -o segtype ${DM_VG_NAME} 2>/dev/null)" in
*thin*|*cache*|*era*)
inst_multiple -o thin_dump thin_restore thin_check thin_repair \
cache_dump cache_restore cache_check cache_repair \
era_check era_dump era_invalidate era_restore
break;;
esac
done
fi
if ! [[ $hostonly ]]; then
inst_multiple -o thin_dump thin_restore thin_check thin_repair \
cache_dump cache_restore cache_check cache_repair \
era_check era_dump era_invalidate era_restore
fi
dracut_need_initqueue
}
PK �5�Z���
�
90lvm/lvm_scan.shnu ȯ�� #!/bin/sh
# run lvm scan if udev has settled
extraargs="$@"
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
VGS=$(getargs rd.lvm.vg -d rd_LVM_VG=)
LVS=$(getargs rd.lvm.lv -d rd_LVM_LV=)
SNAPSHOT=$(getargs rd.lvm.snapshot -d rd_LVM_SNAPSHOT=)
SNAPSIZE=$(getargs rd.lvm.snapsize -d rd_LVM_SNAPSIZE=)
[ -d /etc/lvm ] || mkdir -m 0755 -p /etc/lvm
# build a list of devices to scan
lvmdevs=$(
for f in /tmp/.lvm_scan-*; do
[ -e "$f" ] || continue
printf '%s' "${f##/tmp/.lvm_scan-} "
done
)
if [ ! -e /etc/lvm/lvm.conf ]; then
{
echo 'devices {';
printf ' filter = [ '
for dev in $lvmdevs; do
printf '"a|^/dev/%s$|", ' $dev;
done;
echo '"r/.*/" ]';
echo '}';
# establish LVM locking
if [ -n $SNAPSHOT ]; then
echo 'global {';
echo ' locking_type = 1';
echo ' use_lvmetad = 0';
echo '}';
else
echo 'global {';
echo ' locking_type = 4';
echo ' use_lvmetad = 0';
echo '}';
fi
} > /etc/lvm/lvm.conf
lvmwritten=1
fi
check_lvm_ver() {
maj=$1
min=$2
ver=$3
# --poll is supported since 2.2.57
[ $4 -lt $maj ] && return 1
[ $4 -gt $maj ] && return 0
[ $5 -lt $min ] && return 1
[ $5 -gt $min ] && return 0
[ $6 -ge $ver ] && return 0
return 1
}
# hopefully this output format will never change, e.g.:
# LVM version: 2.02.53(1) (2009-09-25)
OLDIFS=$IFS
IFS=.
set $(lvm version 2>/dev/null)
IFS=$OLDIFS
maj=${1##*:}
min=$2
sub=${3%% *}
sub=${sub%%\(*};
lvm_ignorelockingfailure="--ignorelockingfailure"
lvm_quirk_args="--ignorelockingfailure --ignoremonitoring"
check_lvm_ver 2 2 57 $maj $min $sub && \
lvm_quirk_args="$lvm_quirk_args --poll n"
if check_lvm_ver 2 2 65 $maj $min $sub; then
lvm_quirk_args=" --sysinit $extraargs"
fi
if check_lvm_ver 2 2 221 $maj $min $sub; then
lvm_quirk_args=" $extraargs"
unset lvm_ignorelockingfailure
fi
unset extraargs
export LVM_SUPPRESS_LOCKING_FAILURE_MESSAGES=1
if [ -n "$SNAPSHOT" ] ; then
# HACK - this should probably be done elsewhere or turned into a function
# Enable read-write LVM locking
sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 1/' ${initdir}/etc/lvm/lvm.conf
# Expected SNAPSHOT format "<orig lv name>:<snap lv name>"
ORIG_LV=${SNAPSHOT%%:*}
SNAP_LV=${SNAPSHOT##*:}
info "Removing existing LVM snapshot $SNAP_LV"
lvm lvremove --force $SNAP_LV 2>&1| vinfo
# Determine snapshot size
if [ -z "$SNAPSIZE" ] ; then
SNAPSIZE=$(lvm lvs --noheadings --units m --options lv_size $ORIG_LV)
info "No LVM snapshot size provided, using size of $ORIG_LV ($SNAPSIZE)"
fi
info "Creating LVM snapshot $SNAP_LV ($SNAPSIZE)"
lvm lvcreate -s -n $SNAP_LV -L $SNAPSIZE $ORIG_LV 2>&1| vinfo
fi
if [ -n "$LVS" ] ; then
info "Scanning devices $lvmdevs for LVM logical volumes $LVS"
lvm lvscan $lvm_ignorelockingfailure 2>&1 | vinfo
for LV in $LVS; do
lvm lvchange --yes -K -ay $lvm_quirk_args $LV 2>&1 | vinfo
done
fi
if [ -z "$LVS" -o -n "$VGS" ]; then
info "Scanning devices $lvmdevs for LVM volume groups $VGS"
lvm vgscan $lvm_ignorelockingfailure 2>&1 | vinfo
lvm vgchange -ay $lvm_quirk_args $VGS 2>&1 | vinfo
fi
if [ "$lvmwritten" ]; then
rm -f -- /etc/lvm/lvm.conf
fi
unset lvmwritten
udevadm settle
need_shutdown
PK �5�Z�`�� 90lvm/64-lvm.rulesnu �[��� # hacky rules to try to activate lvm when we get new block devs...
#
# Copyright 2008, Red Hat, Inc.
# Jeremy Katz <katzj@redhat.com>
SUBSYSTEM!="block", GOTO="lvm_end"
ACTION!="add|change", GOTO="lvm_end"
# Also don't process disks that are slated to be a multipath device
ENV{DM_MULTIPATH_DEVICE_PATH}=="1", GOTO="lvm_end"
KERNEL=="dm-[0-9]*", ACTION=="add", GOTO="lvm_end"
ENV{ID_FS_TYPE}!="LVM?_member", GOTO="lvm_end"
PROGRAM=="/bin/sh -c 'for i in $sys/$devpath/holders/dm-[0-9]*; do [ -e $$i ] && exit 0; done; exit 1;' ", \
GOTO="lvm_end"
RUN+="/sbin/initqueue --settled --onetime --unique /sbin/lvm_scan"
RUN+="/sbin/initqueue --timeout --name 51-lvm_scan --onetime --unique /sbin/lvm_scan --partial"
RUN+="/bin/sh -c '>/tmp/.lvm_scan-%k;'"
LABEL="lvm_end"
PK �5�Z��� � 90lvm/parse-lvm.shnu ȯ�� #!/bin/sh
if [ -e /etc/lvm/lvm.conf ] && ! getargbool 1 rd.lvm.conf -d -n rd_NO_LVMCONF; then
rm -f -- /etc/lvm/lvm.conf
fi
LV_DEVS="$(getargs rd.lvm.vg -d rd_LVM_VG=) $(getargs rd.lvm.lv -d rd_LVM_LV=)"
if ! getargbool 1 rd.lvm -d -n rd_NO_LVM \
|| ( [ -z "$LV_DEVS" ] && ! getargbool 0 rd.auto ); then
info "rd.lvm=0: removing LVM activation"
rm -f -- /etc/udev/rules.d/64-lvm*.rules
else
for dev in $LV_DEVS; do
wait_for_dev -n "/dev/$dev"
done
fi
PK �5�Zr E�y y 03rescue/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
# do not add this module by default
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
install() {
inst_multiple -o ps grep more cat rm strace free showmount \
ping netstat rpcinfo vi scp ping6 ssh \
fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.f2fs fsck.vfat e2fsck
}
PK �5�ZyB7�, , 06rngd/module-setup.shnu �[��� #!/bin/bash
# vim: set tabstop=8 shiftwidth=4 softtabstop=4 expandtab smarttab colorcolumn=80:
#
# Copyright (c) 2019 Red Hat, Inc.
# Author: Renaud Métrich <rmetrich@redhat.com>
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
#
depends() {
echo systemd
return 0
}
check() {
# if there's no rngd binary, no go.
require_binaries rngd || return 1
return 0
}
install() {
inst rngd
inst_simple "${systemdsystemunitdir}/rngd.service"
if [ -r /etc/sysconfig/rngd ]; then
inst_simple "${moddir}/sysconfig" "/etc/sysconfig/rngd"
fi
# make sure dependant libs are installed too
inst_libdir_file opensc-pkcs11.so
systemctl -q --root "$initdir" add-wants sysinit.target rngd.service
}
PK �5�Z�Iڛ: : 06rngd/sysconfignu �[��� RNGD_ARGS="--fill-watermark=0 -x pkcs11 -x nist -x qrypt"
PK �5�Z�'��L L 50drm/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
return 255
}
# called by dracut
depends() {
return 0
}
# called by dracut
installkernel() {
local _modname
# Include KMS capable drm drivers
if [[ "$(uname -m)" == arm* || "$(uname -m)" == aarch64 ]]; then
# arm/aarch64 specific modules needed by drm
instmods \
"=drivers/gpu/drm/i2c" \
"=drivers/gpu/drm/panel" \
"=drivers/gpu/drm/bridge" \
"=drivers/video/backlight" \
${NULL}
fi
instmods amdkfd hyperv_fb "=drivers/pwm"
# if the hardware is present, include module even if it is not currently loaded,
# as we could e.g. be in the installer; nokmsboot boot parameter will disable
# loading of the driver if needed
if [[ $hostonly ]]; then
for i in /sys/bus/{pci/devices,virtio/devices,soc/devices/soc?}/*/modalias; do
[[ -e $i ]] || continue
if hostonly="" dracut_instmods --silent -s "drm_crtc_init|drm_dev_register" -S "iw_handler_get_spy" $(<$i); then
if strstr "$(modinfo -F filename $(<$i) 2>/dev/null)" radeon.ko; then
hostonly='' instmods amdkfd
fi
fi
done
else
dracut_instmods -o -s "drm_crtc_init|drm_dev_register" "=drivers/gpu/drm" "=drivers/staging"
fi
}
PK �5�Zq@�# # 05nss-softokn/module-setup.shnu ȯ�� #!/bin/bash
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
check() {
return 255
}
depends() {
return 0
}
install() {
local _dir
inst_libdir_file libfreeblpriv3.so libfreeblpriv3.chk \
libfreebl3.so
}
PK �5�Z�=N � � 95fcoe/lldpad.shnu ȯ�� #!/bin/bash
if ! getargbool 1 rd.fcoe -d -n rd.nofcoe ; then
info "rd.fcoe=0: skipping lldpad activation"
return 0
fi
# Note lldpad will stay running after switchroot, the system initscripts
# are to kill it and start a new lldpad to take over. Data is transfered
# between the 2 using a shm segment
lldpad -d
# wait for lldpad to be ready
i=0
while [ $i -lt 60 ]; do
lldptool -p && break
info "Waiting for lldpad to be ready"
sleep 1
i=$(($i+1))
done
PK �5�Z���i� � 95fcoe/fcoe-up.shnu ȯ�� #!/bin/sh
#
# We get called like this:
# fcoe-up <network-device> <dcb|nodcb> <fabric|vn2vn>
#
# Note currently only nodcb is supported, the dcb option is reserved for
# future use.
PATH=/usr/sbin:/usr/bin:/sbin:/bin
type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh
# Huh? Missing arguments ??
[ -z "$1" -o -z "$2" ] && exit 1
netif=$1
dcb=$2
mode=$3
vlan="yes"
iflink=$(cat /sys/class/net/$netif/iflink)
ifindex=$(cat /sys/class/net/$netif/ifindex)
if [ "$iflink" != "$ifindex" ] ; then
# Skip VLAN devices
exit 0
fi
ip link set dev $netif up
linkup "$netif"
# Some fcoemon implementations expect --syslog=true
syslogopt="--syslog"
if fcoemon -h|grep syslog|grep -q yes; then
fcoemonyes="$syslogopt=yes"
fi
netdriver=$(readlink -f /sys/class/net/$netif/device/driver)
netdriver=${netdriver##*/}
write_fcoemon_cfg() {
[ -f /etc/fcoe/cfg-$netif ] && return
echo FCOE_ENABLE=\"yes\" > /etc/fcoe/cfg-$netif
if [ "$dcb" = "dcb" ]; then
echo DCB_REQUIRED=\"yes\" >> /etc/fcoe/cfg-$netif
else
echo DCB_REQUIRED=\"no\" >> /etc/fcoe/cfg-$netif
fi
if [ "$vlan" = "yes" ]; then
echo AUTO_VLAN=\"yes\" >> /etc/fcoe/cfg-$netif
else
echo AUTO_VLAN=\"no\" >> /etc/fcoe/cfg-$netif
fi
if [ "$mode" = "vn2vn" ] ; then
echo MODE=\"vn2vn\" >> /etc/fcoe/cfg-$netif
else
echo MODE=\"fabric\" >> /etc/fcoe/cfg-$netif
fi
}
if [ "$netdriver" = "bnx2x" ]; then
# If driver is bnx2x, do not use /sys/module/fcoe/parameters/create but fipvlan
modprobe 8021q
udevadm settle --timeout=30
# Sleep for 13 s to allow dcb negotiation
sleep 13
fipvlan "$netif" -c -s
need_shutdown
exit
fi
if [ "$dcb" = "dcb" ]; then
# wait for lldpad to be ready
i=0
while [ $i -lt 60 ]; do
lldptool -p && break
info "Waiting for lldpad to be ready"
sleep 1
i=$(($i+1))
done
while [ $i -lt 60 ]; do
dcbtool sc "$netif" dcb on && break
info "Retrying to turn dcb on"
sleep 1
i=$(($i+1))
done
while [ $i -lt 60 ]; do
dcbtool sc "$netif" pfc e:1 a:1 w:1 && break
info "Retrying to turn dcb on"
sleep 1
i=$(($i+1))
done
while [ $i -lt 60 ]; do
dcbtool sc "$netif" app:fcoe e:1 a:1 w:1 && break
info "Retrying to turn fcoe on"
sleep 1
i=$(($i+1))
done
sleep 1
fi
write_fcoemon_cfg
fcoemon $syslogopt
need_shutdown
PK �5�Z�x�-� � 95fcoe/parse-fcoe.shnu ȯ�� #!/bin/sh
#
# Supported formats:
# fcoe=<networkdevice>:<dcb|nodcb>:<fabric|vn2vn>
# fcoe=<macaddress>:<dcb|nodcb>:<fabric|vn2vn>
#
# Note currently only nodcb is supported, the dcb option is reserved for
# future use.
#
# Note letters in the macaddress must be lowercase!
#
# Examples:
# fcoe=eth0:nodcb:vn2vn
# fcoe=4a:3f:4c:04:f8:d7:nodcb:fabric
if ! getargbool 1 rd.fcoe -d -n rd.nofcoe ; then
info "rd.fcoe=0: skipping fcoe"
return 0
fi
[ -z "$fcoe" ] && fcoe=$(getarg fcoe=)
# If it's not set we don't continue
[ -z "$fcoe" ] && return
[ -e /sys/bus/fcoe/ctlr_create ] || modprobe -b -a fcoe || modprobe -b -a libfcoe || die "FCoE requested but kernel/initrd does not support FCoE"
initqueue --onetime modprobe -b -q bnx2fc
parse_fcoe_opts() {
local OLDIFS="$IFS"
local IFS=:
set $fcoe
IFS="$OLDIFS"
case $# in
2)
fcoe_interface=$1
fcoe_dcb=$2
fcoe_mode="fabric"
return 0
;;
3)
fcoe_interface=$1
fcoe_dcb=$2
fcoe_mode=$3
return 0
;;
7)
fcoe_mac=$1:$2:$3:$4:$5:$6
fcoe_dcb=$7
fcoe_mode="fabric"
return 0
;;
8)
fcoe_mac=$1:$2:$3:$4:$5:$6
fcoe_dcb=$7
fcoe_mode=$8
return 0
;;
*)
warn "Invalid arguments for fcoe=$fcoe"
return 1
;;
esac
}
parse_fcoe_opts
if [ "$fcoe_interface" = "edd" ]; then
if [ "$fcoe_dcb" != "nodcb" -a "$fcoe_dcb" != "dcb" ] ; then
warn "Invalid FCoE DCB option: $fcoe_dcb"
fi
/sbin/initqueue --settled --unique /sbin/fcoe-edd $fcoe_dcb
else
for fcoe in $(getargs fcoe=); do
unset fcoe_mac
unset fcoe_interface
parse_fcoe_opts
if [ "$fcoe_dcb" != "nodcb" -a "$fcoe_dcb" != "dcb" ] ; then
warn "Invalid FCoE DCB option: $fcoe_dcb"
fi
. $(command -v fcoe-genrules.sh)
done
fi
PK �5�Z%��\
\
95fcoe/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
is_fcoe() {
block_is_fcoe $1 || return 1
}
[[ $hostonly ]] || [[ $mount_needs ]] && {
for_each_host_dev_and_slaves is_fcoe || return 255
}
require_binaries dcbtool fipvlan lldpad ip readlink fcoemon fcoeadm || return 1
return 0
}
# called by dracut
depends() {
echo network rootfs-block
return 0
}
# called by dracut
installkernel() {
instmods fcoe libfcoe 8021q edd bnx2fc
}
get_vlan_parent() {
local link=$1
[ -d $link ] || return
read iflink < $link/iflink
for if in /sys/class/net/* ; do
read idx < $if/ifindex
if [ $idx -eq $iflink ] ; then
echo ${if##*/}
fi
done
}
# called by dracut
cmdline() {
{
for c in /sys/bus/fcoe/devices/ctlr_* ; do
[ -L $c ] || continue
read enabled < $c/enabled
read mode < $c/mode
[ $enabled -eq 0 ] && continue
if [ $mode = "VN2VN" ] ; then
mode="vn2vn"
else
mode="fabric"
fi
d=$(cd -P $c; echo $PWD)
i=${d%/*}
ifname=${i##*/}
read mac < ${i}/address
s=$(dcbtool gc ${i##*/} dcb 2>/dev/null | sed -n 's/^DCB State:\t*\(.*\)/\1/p')
if [ -z "$s" ] ; then
p=$(get_vlan_parent ${i})
if [ "$p" ] ; then
s=$(dcbtool gc ${p} dcb 2>/dev/null | sed -n 's/^DCB State:\t*\(.*\)/\1/p')
ifname=${p##*/}
fi
fi
if [ "$s" = "on" ] ; then
dcb="dcb"
else
dcb="nodcb"
fi
# Some Combined Network Adapters(CNAs) implement DCB in firmware.
# Do not run software-based DCB or LLDP on CNAs that implement DCB.
# If the network interface provides hardware DCB/DCBX capabilities,
# DCB_REQUIRED in "/etc/fcoe/cfg-xxx" is expected to set to "no".
#
# Force "nodcb" if there's any DCB_REQUIRED="no"(child or vlan parent).
grep -q "^[[:blank:]]*DCB_REQUIRED=\"no\"" /etc/fcoe/cfg-${i##*/} &>/dev/null
[ $? -eq 0 ] && dcb="nodcb"
if [ "$p" ] ; then
grep -q "^[[:blank:]]*DCB_REQUIRED=\"no\"" /etc/fcoe/cfg-${p} &>/dev/null
[ $? -eq 0 ] && dcb="nodcb"
fi
echo "ifname=${ifname}:${mac}"
echo "fcoe=${ifname}:${dcb}:${mode}"
done
} | sort | uniq
}
# called by dracut
install() {
inst_multiple ip dcbtool fipvlan lldpad readlink lldptool fcoemon fcoeadm
if [ -e "/etc/hba.conf" ]; then
inst_libdir_file 'libhbalinux.so*'
inst_simple "/etc/hba.conf"
fi
mkdir -m 0755 -p "$initdir/var/lib/lldpad"
mkdir -m 0755 -p "$initdir/etc/fcoe"
if [[ $hostonly_cmdline == "yes" ]] ; then
local _fcoeconf=$(cmdline)
[[ $_fcoeconf ]] && printf "%s\n" "$_fcoeconf" >> "${initdir}/etc/cmdline.d/95fcoe.conf"
fi
inst_multiple /etc/fcoe/cfg-*
inst "$moddir/fcoe-up.sh" "/sbin/fcoe-up"
inst "$moddir/fcoe-edd.sh" "/sbin/fcoe-edd"
inst "$moddir/fcoe-genrules.sh" "/sbin/fcoe-genrules.sh"
inst_hook pre-trigger 03 "$moddir/lldpad.sh"
inst_hook cmdline 99 "$moddir/parse-fcoe.sh"
inst_hook cleanup 90 "$moddir/cleanup-fcoe.sh"
inst_hook shutdown 40 "$moddir/stop-fcoe.sh"
dracut_need_initqueue
}
PK �5�Z�g�o o 95fcoe/stop-fcoe.shnu ȯ�� #!/bin/bash
for f in /sys/bus/fcoe/devices/ctlr_* ; do
[ -e $f ] || continue
echo 0 > $f/enabled
done
PK �5�Z,�v 95fcoe/cleanup-fcoe.shnu ȯ�� #!/bin/sh
# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ -e /var/run/lldpad.pid ]; then
lldpad -k
# with systemd version 230, this is not necessary anymore
# systemd commit cacf980ed44a28e276a6cc7f8fc41f991e2ab354
if [ -z "$DRACUT_SYSTEMD" ]; then
mkdir -m 0755 -p /run/initramfs/state/dev/shm
cp /dev/shm/lldpad.state /run/initramfs/state/dev/shm/ > /dev/null 2>&1
echo "files /dev/shm/lldpad.state" >> /run/initramfs/rwtab
fi
fi
PK �5�ZC� � 95fcoe/fcoe-edd.shnu ȯ�� #!/bin/sh
dcb="$1"
_modprobe_r_edd="0"
check_edd() {
local cnt=0
[ -d /sys/firmware/edd ] && return 0
_modprobe_r_edd="1"
modprobe edd || return $?
while [ $cnt -lt 600 ]; do
[ -d /sys/firmware/edd ] && return 0
cnt=$(($cnt+1))
sleep 0.1
done
return 1
}
check_edd || exit 1
for disk in /sys/firmware/edd/int13_*; do
[ -d "$disk" ] || continue
if [ -e "${disk}/pci_dev/driver" ]; then
driver=$(readlink "${disk}/pci_dev/driver")
driver=${driver##*/}
fi
# i40e uses dev_port 1 for a virtual fcoe function
if [ "${driver}" = "i40e" ]; then
dev_port=1
fi
for nic in "${disk}"/pci_dev/net/*; do
[ -d "$nic" ] || continue
if [ -n "${dev_port}" -a -e "${nic}/dev_port" ]; then
if [ "$(cat ${nic}/dev_port)" -ne "${dev_port}" ]; then
continue
fi
fi
if [ -e ${nic}/address ]; then
fcoe_interface=${nic##*/}
if ! [ -e "/tmp/.fcoe-$fcoe_interface" ]; then
/sbin/fcoe-up "$fcoe_interface" "$dcb"
> "/tmp/.fcoe-$fcoe_interface"
fi
fi
done
done
[ "$_modprobe_r_edd" = "1" ] && modprobe -r edd
unset _modprobe_r_edd
PK �5�Zk*� � 95fcoe/fcoe-genrules.shnu ȯ�� #!/bin/sh
# We use (fcoe_interface or fcoe_mac) and fcoe_dcb as set by parse-fcoe.sh
# If neither mac nor interface are set we don't continue
[ -z "$fcoe_interface" -a -z "$fcoe_mac" ] && return
# Write udev rules
{
if [ -n "$fcoe_mac" ] ; then
printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/initqueue --onetime --unique --name fcoe-up-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_mac" "$fcoe_dcb" "$fcoe_mode"
printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/initqueue --onetime --timeout --unique --name fcoe-timeout-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_mac" "$fcoe_dcb" "$fcoe_mode"
else
printf 'ACTION=="add", SUBSYSTEM=="net", NAME=="%s", RUN+="/sbin/initqueue --onetime --unique --name fcoe-up-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_interface" "$fcoe_dcb" "$fcoe_mode"
printf 'ACTION=="add", SUBSYSTEM=="net", NAME=="%s", RUN+="/sbin/initqueue --onetime --timeout --unique --name fcoe-timeout-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s %s"\n' "$fcoe_interface" "$fcoe_dcb" "$fcoe_mode"
fi
} >> /etc/udev/rules.d/92-fcoe.rules
PK �5�Z�O#w�$ �$ 00systemd/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
check() {
[[ $mount_needs ]] && return 1
if require_binaries $systemdutildir/systemd; then
SYSTEMD_VERSION=$($systemdutildir/systemd --version | { read a b a; echo $b; })
(( $SYSTEMD_VERSION >= 198 )) && return 0
return 255
fi
return 1
}
# called by dracut
depends() {
return 0
}
installkernel() {
hostonly='' instmods autofs4 ipv6 algif_hash hmac sha256 sg
instmods -s efivarfs
}
# called by dracut
install() {
local _mods
if [[ "$prefix" == /run/* ]]; then
dfatal "systemd does not work with a prefix, which contains \"/run\"!!"
exit 1
fi
inst_multiple -o \
$systemdutildir/system-generators/systemd-debug-generator \
$systemdsystemunitdir/debug-shell.service
inst_multiple -o \
$systemdutildir/systemd \
$systemdutildir/systemd-coredump \
$systemdutildir/systemd-cgroups-agent \
$systemdutildir/systemd-shutdown \
$systemdutildir/systemd-reply-password \
$systemdutildir/systemd-fsck \
$systemdutildir/systemd-udevd \
$systemdutildir/systemd-journald \
$systemdutildir/systemd-sysctl \
$systemdutildir/systemd-modules-load \
$systemdutildir/systemd-vconsole-setup \
$systemdutildir/systemd-sysroot-fstab-check \
$systemdutildir/system-generators/systemd-fstab-generator \
$systemdutildir/system-generators/systemd-gpt-auto-generator \
\
$systemdsystemunitdir/cryptsetup.target \
$systemdsystemunitdir/emergency.target \
$systemdsystemunitdir/sysinit.target \
$systemdsystemunitdir/basic.target \
$systemdsystemunitdir/halt.target \
$systemdsystemunitdir/kexec.target \
$systemdsystemunitdir/local-fs.target \
$systemdsystemunitdir/local-fs-pre.target \
$systemdsystemunitdir/remote-fs.target \
$systemdsystemunitdir/remote-fs-pre.target \
$systemdsystemunitdir/multi-user.target \
$systemdsystemunitdir/network.target \
$systemdsystemunitdir/network-pre.target \
$systemdsystemunitdir/network-online.target \
$systemdsystemunitdir/nss-lookup.target \
$systemdsystemunitdir/nss-user-lookup.target \
$systemdsystemunitdir/poweroff.target \
$systemdsystemunitdir/reboot.target \
$systemdsystemunitdir/rescue.target \
$systemdsystemunitdir/rpcbind.target \
$systemdsystemunitdir/shutdown.target \
$systemdsystemunitdir/final.target \
$systemdsystemunitdir/sigpwr.target \
$systemdsystemunitdir/sockets.target \
$systemdsystemunitdir/swap.target \
$systemdsystemunitdir/timers.target \
$systemdsystemunitdir/paths.target \
$systemdsystemunitdir/umount.target \
\
$systemdsystemunitdir/sys-kernel-config.mount \
\
$systemdsystemunitdir/kmod-static-nodes.service \
$systemdsystemunitdir/systemd-tmpfiles-setup.service \
$systemdsystemunitdir/systemd-tmpfiles-setup-dev.service \
$systemdsystemunitdir/systemd-ask-password-console.path \
$systemdsystemunitdir/systemd-udevd-control.socket \
$systemdsystemunitdir/systemd-udevd-kernel.socket \
$systemdsystemunitdir/systemd-ask-password-plymouth.path \
$systemdsystemunitdir/systemd-journald.socket \
$systemdsystemunitdir/systemd-journald-audit.socket \
$systemdsystemunitdir/systemd-ask-password-console.service \
$systemdsystemunitdir/systemd-modules-load.service \
$systemdsystemunitdir/systemd-halt.service \
$systemdsystemunitdir/systemd-poweroff.service \
$systemdsystemunitdir/systemd-reboot.service \
$systemdsystemunitdir/systemd-kexec.service \
$systemdsystemunitdir/systemd-fsck@.service \
$systemdsystemunitdir/systemd-udevd.service \
$systemdsystemunitdir/systemd-udev-trigger.service \
$systemdsystemunitdir/systemd-udev-settle.service \
$systemdsystemunitdir/systemd-ask-password-plymouth.service \
$systemdsystemunitdir/systemd-journald.service \
$systemdsystemunitdir/systemd-vconsole-setup.service \
$systemdsystemunitdir/systemd-random-seed-load.service \
$systemdsystemunitdir/systemd-random-seed.service \
$systemdsystemunitdir/systemd-sysctl.service \
\
$systemdsystemunitdir/sysinit.target.wants/systemd-modules-load.service \
$systemdsystemunitdir/sysinit.target.wants/systemd-ask-password-console.path \
$systemdsystemunitdir/sysinit.target.wants/systemd-journald.service \
$systemdsystemunitdir/sockets.target.wants/systemd-udevd-control.socket \
$systemdsystemunitdir/sockets.target.wants/systemd-udevd-kernel.socket \
$systemdsystemunitdir/sockets.target.wants/systemd-journald.socket \
$systemdsystemunitdir/sockets.target.wants/systemd-journald-audit.socket \
$systemdsystemunitdir/sockets.target.wants/systemd-journald-dev-log.socket \
$systemdsystemunitdir/sysinit.target.wants/systemd-udevd.service \
$systemdsystemunitdir/sysinit.target.wants/systemd-udev-trigger.service \
$systemdsystemunitdir/sysinit.target.wants/kmod-static-nodes.service \
$systemdsystemunitdir/sysinit.target.wants/systemd-tmpfiles-setup.service \
$systemdsystemunitdir/sysinit.target.wants/systemd-tmpfiles-setup-dev.service \
$systemdsystemunitdir/sysinit.target.wants/systemd-sysctl.service \
\
$systemdsystemunitdir/ctrl-alt-del.target \
$systemdsystemunitdir/reboot.target \
$systemdsystemunitdir/systemd-reboot.service \
$systemdsystemunitdir/syslog.socket \
\
$systemdsystemunitdir/slices.target \
$systemdsystemunitdir/system.slice \
$systemdsystemunitdir/-.slice \
\
$tmpfilesdir/systemd.conf \
\
journalctl systemctl \
echo swapoff \
kmod insmod rmmod modprobe modinfo depmod lsmod \
mount umount reboot poweroff \
systemd-run systemd-escape \
systemd-cgls systemd-tmpfiles \
/etc/udev/udev.hwdb \
${NULL}
inst_multiple -o \
/usr/lib/modules-load.d/*.conf \
/usr/lib/sysctl.d/*.conf
modules_load_get() {
local _line i
for i in "$1"/*.conf; do
[[ -f $i ]] || continue
while read _line || [ -n "$_line" ]; do
case $_line in
\#*)
;;
\;*)
;;
*)
echo $_line
esac
done < "$i"
done
}
_mods=$(modules_load_get /usr/lib/modules-load.d)
[[ $_mods ]] && hostonly='' instmods $_mods
if [[ $hostonly ]]; then
inst_multiple -H -o \
/etc/systemd/journald.conf \
/etc/systemd/journald.conf.d/*.conf \
/etc/systemd/system.conf \
/etc/systemd/system.conf.d/*.conf \
/etc/hostname \
/etc/machine-id \
/etc/machine-info \
/etc/vconsole.conf \
/etc/locale.conf \
/etc/modules-load.d/*.conf \
/etc/sysctl.d/*.conf \
/etc/sysctl.conf \
/etc/udev/udev.conf \
${NULL}
_mods=$(modules_load_get /etc/modules-load.d)
[[ $_mods ]] && hostonly='' instmods $_mods
fi
if ! [[ -e "$initdir/etc/machine-id" ]]; then
> "$initdir/etc/machine-id"
fi
# install adm user/group for journald
inst_multiple nologin
grep '^systemd-journal:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
grep '^adm:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
grep '^systemd-journal:' /etc/group >> "$initdir/etc/group"
grep '^wheel:' /etc/group >> "$initdir/etc/group"
grep '^adm:' /etc/group >> "$initdir/etc/group"
grep '^utmp:' /etc/group >> "$initdir/etc/group"
grep '^root:' /etc/group >> "$initdir/etc/group"
# we don't use systemd-networkd, but the user is in systemd.conf tmpfiles snippet
grep '^systemd-network:' /etc/passwd 2>/dev/null >> "$initdir/etc/passwd"
grep '^systemd-network:' /etc/group >> "$initdir/etc/group"
ln_r $systemdutildir/systemd "/init"
ln_r $systemdutildir/systemd "/sbin/init"
inst_binary true
ln_r $(find_binary true) "/usr/bin/loginctl"
ln_r $(find_binary true) "/bin/loginctl"
inst_rules \
70-uaccess.rules \
71-seat.rules \
73-seat-late.rules \
90-vconsole.rules \
99-systemd.rules \
${NULL}
for i in \
emergency.target \
rescue.target \
systemd-ask-password-console.service \
systemd-ask-password-plymouth.service \
; do
systemctl -q --root "$initdir" add-wants "$i" systemd-vconsole-setup.service 2>/dev/null
done
mkdir -p "$initdir/etc/systemd"
# We must use a volatile journal, and we don't want rate-limiting
{
echo "[Journal]"
echo "Storage=volatile"
echo "RateLimitInterval=0"
echo "RateLimitBurst=0"
} >> "$initdir/etc/systemd/journald.conf"
systemctl -q --root "$initdir" set-default multi-user.target
}
PK �5�Z�J�� � & 90kernel-modules-extra/module-setup.shnu ȯ�� #!/bin/bash
# called by dracut
#
# Parses depmod configuration and calls instmods for out-of-tree kernel
# modules found. Specifically, kernel modules inside directories that
# come from the following places are included (if these kernel modules
# are present in modules.dep):
# - "search" configuration option;
# - "override" configuration option (matching an exact file name constructed
# by concatenating the provided directory and the kernel module name);
# - "external" configuration option (if "external" is a part of "search"
# configuration).
# (See depmod.d(5) for details.)
#
# This module has the following variables available for configuration:
# - "depmod_modules_dep" - Path to the modules.dep file
# ("$srcmods/modules.dep" by default);
# - "depmod_module_dir" - Directory containing kernel modules ("$srcmods"
# by default);
# - "depmod_configs" - array of depmod configuration paths to parse
# (as supplied to depmod -C, ("/run/depmod.d/"
# "/etc/depmod.d/" "/lib/depmod.d/") by default).
installkernel()
{
: "${depmod_modules_dep:=$srcmods/modules.dep}"
: "${depmod_module_dir:=$srcmods}"
[[ -f "${depmod_modules_dep}" ]] || return 0
# Message printers with custom prefix
local mod_name="kernel-modules-extra"
prinfo() { dinfo " ${mod_name}: $*"; }
prdebug() { ddebug " ${mod_name}: $*"; }
# Escape a string for usage as a part of extended regular expression.
# $1 - string to escape
re_escape() {
printf "%s" "$1" | sed 's/\([.+?^$\/\\|()\[]\|\]\)/\\\0/'
}
local OLDIFS
local cfg
local cfgs=()
local search_list=""
local overrides=()
local external_dirs=()
local e f
## Gathering and sorting configuration file list
[ -n "${depmod_configs[@]-}" ] \
|| depmod_configs=(/run/depmod.d/ /etc/depmod.d/ /lib/depmod.d/)
for cfg in "${depmod_configs[@]}"; do
[ -e "$cfg" ] || {
prdebug "configuration source \"$cfg\" does not exist"
continue
}
# '/' is used as a separator between configuration name and
# configuration path
if [ -d "$cfg" ]; then
for f in "$cfg/"*; do
[[ -e "$f" && ! -d "$f" ]] || {
prdebug "configuration source" \
"\"$cfg\" is ignored" \
"(directory or doesn't exist)"
continue
}
cfgs+=("$(basename "$f")/$f")
done
else
cfgs+=("$(basename "$cfg")/$cfg")
fi
done
OLDIFS="$IFS"
IFS=$'\n'
LANG=C cfgs=($(printf '%s\n' "${cfgs[@]}" \
| sort -u -k1,1 -t '/' | cut -f 2- -d '/'))
IFS="$OLDIFS"
## Parse configurations
for cfg in "${cfgs[@]}"; do
prdebug "parsing configuration file \"$cfg\""
local k v mod kverpat path
while read -r k v; do
case "$k" in
search)
search_list="$search_list $v"
prdebug "$cfg: added \"$v\" to the list of" \
"search directories"
;;
override) # module_name kver_pattern dir
read -r mod kverpat path <<<"$v"
if [[ ! "$mod" || ! "$kverpat" || ! "$path" ]]
then
prinfo "$cfg: ignoring incorrect" \
"override option: \"$k $v\""
continue
fi
if [[ '*' = "$kverpat" \
|| "$kernel" =~ "$kverpat" ]]
then
overrides+=("${path}/${mod}")
prdebug "$cfg: added override" \
"\"${path}/${mod}\""
else
prdebug "$cfg: override \"$v\" is" \
"ignored since \"$kverpat\"" \
"doesn't match \"$kernel\""
fi
;;
external) # kverpat dir
read -r kverpat path <<<"$v"
if [[ ! "$kverpat" || ! "$path" ]]; then
prinfo "$cfg: ignoring incorrect" \
"external option: \"$k $v\""
continue
fi
if [[ '*' = "$kverpat" \
|| "$kernel" =~ "$kverpat" ]]
then
external_dirs+=("$path")
prdebug "$cfg: added external" \
"directory \"$path\""
else
prdebug "$cfg: external directory" \
"\"$path\" is ignored since" \
"\"$kverpat\" doesn't match " \
"\"$kernel\""
fi
;;
'#'*|'') # comments and empty strings
;;
include|make_map_files) # ignored by depmod
;;
*)
prinfo "$cfg: unknown depmod configuration" \
"option \"$k $v\""
;;
esac
done < "$cfg"
done
# "updates built-in" is the default search list
: "${search_list:=updates}"
## Build a list of regular expressions for grepping modules.dep
local pathlist=()
for f in "${overrides[@]}"; do
pathlist+=("^$(re_escape "$f")")
done
for f in $(printf "%s" "$search_list"); do
# Ignoring builtin modules
[ "built-in" != "$f" ] || continue
if [ "external" = "$f" ]; then
for e in "${external_dirs[@]}"; do
pathlist+=("$(re_escape "${e%/}")/[^:]+")
done
fi
pathlist+=("$(re_escape "${f%/}")/[^:]+")
done
## Filter modules.dep, canonicalise the resulting filenames and supply
## them to instmods.
[ 0 -lt "${#pathlist[@]}" ] || return 0
printf "^%s\.ko(\.gz|\.bz2|\.xz)?:\n" "${pathlist[@]}" \
| (LANG=C grep -E -o -f - -- "$depmod_modules_dep" || exit 0) \
| tr -d ':' \
| (cd "$depmod_module_dir" || exit; xargs -r realpath -se --) \
| instmods || return 1
return 0
}
PK �5�Z��Q� � ( 90kernel-network-modules/module-setup.shnu ȯ�� PK �5�Z�� �� � � 98syslog/module-setup.shnu ȯ�� PK �5�Z��G� � �
98syslog/parse-syslog-opts.shnu ȯ�� PK �5�ZO��4 4 � 98syslog/rsyslog.confnu �[��� PK �5�ZP
�A A 98syslog/READMEnu �[��� PK �5�Z��H� � � 98syslog/syslog-cleanup.shnu ȯ�� PK �5�Zd�'� � f 98syslog/rsyslogd-start.shnu ȯ�� PK �5�ZѯW� � 98syslog/rsyslogd-stop.shnu ȯ�� PK �5�Z�OH�� � � 90dm/dm-shutdown.shnu ȯ�� PK �5�Z��Ȑf f $ 90dm/dm-pre-udev.shnu ȯ�� PK �5�Z�pZ�� � # �$ 90dm/59-persistent-storage-dm.rulesnu �[��� PK �5�Z����� � �' 90dm/module-setup.shnu ȯ�� PK �5�ZӴl�� � �+ 90dm/11-dm.rulesnu �[��� PK �5�Zm��>� � �, 95nvmf/module-setup.shnu ȯ�� PK �5�Z��� � % �6 95nvmf/parse-nvmf-boot-connections.shnu ȯ�� PK �5�Z��o � � �E 95nvmf/nvmf-autoconnect.shnu �[��� PK �5�Z<�s�" " �F 90qemu-net/module-setup.shnu ȯ�� PK �5�Z���`� � 0J 95virtfs/module-setup.shnu ȯ�� PK �5�Z��Y] ] BN 95virtfs/parse-virtfs.shnu ȯ�� PK �5�Zb���G G �N 95virtfs/mount-virtfs.shnu ȯ�� PK �5�Z��ZC� � vV 95resume/module-setup.shnu ȯ�� PK �5�Zk!;1' ' >^ 95resume/parse-resume.shnu ȯ�� PK �5�Z�pK�0 0 �l 95resume/resume.shnu ȯ�� PK �5�ZUަ & & o 95debug/module-setup.shnu ȯ�� PK �5�Z�y;� � �q 50plymouth/module-setup.shnu ȯ�� PK �5�Zr�3 3 �v 50plymouth/plymouth-emergency.shnu ȯ�� PK �5�Z�T�<� � ! 5w 50plymouth/plymouth-pretrigger.shnu ȯ�� PK �5�Z�b�q q | 50plymouth/plymouth-newroot.shnu ȯ�� PK �5�Z8�� � & �| 50plymouth/plymouth-populate-initrd.shnu ȯ�� PK �5�Z�=>)
� 90qemu/module-setup.shnu ȯ�� PK �5�ZҚ�rt t 5� 10i18n/module-setup.shnu ȯ�� PK �5�Z� zfD D
� 10i18n/READMEnu �[��� PK �5�Z(�2�� � p� 10i18n/10-console.rulesnu �[��� PK �5�Z�G�� � _� 10i18n/parse-i18n.shnu ȯ�� PK �5�Z ���L L *� 10i18n/console_init.shnu ȯ�� PK �5�Z� S �� 97biosdevname/module-setup.shnu ȯ�� PK �5�Z"��5 5 " (� 97biosdevname/parse-biosdevname.shnu ȯ�� PK �5�ZIa��� � �� 98selinux/module-setup.shnu ȯ�� PK �5�Z�w 0� � �� 98selinux/selinux-loadpolicy.shnu ȯ�� PK �5�Z^Y~:
:
�� 91crypt-gpg/crypt-gpg-lib.shnu ȯ�� PK �5�Z{o�o� � t� 91crypt-gpg/module-setup.shnu ȯ�� PK �5�ZF%��#
#
�� 91crypt-gpg/READMEnu �[��� PK �5�Z�O�Ù � � 90dmraid/61-dmraid-imsm.rulesnu �[��� PK �5�Z� �K K �� 90dmraid/module-setup.shnu ȯ�� PK �5�Zw��o: : �� 90dmraid/parse-dm.shnu ȯ�� PK �5�ZW�x� � � 90dmraid/dmraid.shnu ȯ�� PK �5�ZN���X X � 95iscsi/cleanup-iscsi.shnu ȯ�� PK �5�ZvwH�$ �$ � 95iscsi/module-setup.shnu ȯ�� PK �5�ZortJ� � m( 95iscsi/parse-iscsiroot.shnu ȯ�� PK �5�Z�q"�L L �@ 95iscsi/mount-lun.shnu ȯ�� PK �5�Z���o�) �) B 95iscsi/iscsiroot.shnu ȯ�� PK �5�Z�ԋb{ { �k 35network-manager/nm-lib.shnu �[��� PK �5�ZXӊ5 5 ! �n 35network-manager/module-setup.shnu ȯ�� PK �5�Z��� 2u 35network-manager/nm-run.shnu ȯ�� PK �5�Z+ D� � �y 35network-manager/nm-config.shnu ȯ�� PK �5�Z��� � ! �z 90multipath/multipath-shutdown.shnu ȯ�� PK �5�Z��d �
�
�{ 90multipath/module-setup.shnu ȯ�� PK �5�ZS&,�� � u� 90multipath/multipathd.shnu ȯ�� PK �5�Z��BMp p ( J� 90multipath/multipathd-configure.servicenu �[��� PK �5�Zgþ � 90multipath/multipathd.servicenu �[��� PK �5�Z%!�� � q� 90multipath/multipathd-stop.shnu ȯ�� PK �5�Z�DF� � & �� 90multipath/multipathd-needshutdown.shnu ȯ�� PK �5�ZN��I I �� 99shutdown/module-setup.shnu ȯ�� PK �5�Z�u��6 6 7� 99shutdown/shutdown.shnu ȯ�� PK �5�Z�� �� � �� 90kernel-modules/module-setup.shnu ȯ�� PK �5�ZL�� � � 90kernel-modules/parse-kernel.shnu ȯ�� PK �5�Z��?� � յ 90kernel-modules/insmodpost.shnu ȯ�� PK �5�Z&U�>p p � 99memstrack/module-setup.shnu ȯ�� PK �5�ZC�� �� 99memstrack/memstrack-start.shnu ȯ�� PK �5�Z`��B B �� 99memstrack/memstrack.servicenu �[��� PK �5�Z2� � �� 99memstrack/memstrack-report.shnu ȯ�� PK �5�Z� U�i i �� 00bash/module-setup.shnu ȯ�� PK �5�Z<߆>� � % R� 71prefixdevname-tools/module-setup.shnu ȯ�� PK �5�Z%�*�� � r� 95nbd/nbdroot.shnu ȯ�� PK �5�ZB� f� 95nbd/module-setup.shnu ȯ�� PK �5�Z�f�� � �� 95nbd/parse-nbdroot.shnu ȯ�� PK �5�ZYӲ�� � �� 95nbd/nbd-generator.shnu ȯ�� PK �5�Z��4) ) �� 01systemd-initrd/module-setup.shnu ȯ�� PK �5�ZF�o� � � 71prefixdevname/module-setup.shnu ȯ�� PK �5�Z�}%@� � P� 95lunmask/parse-lunmask.shnu ȯ�� PK �5�ZЍW`� � e� 95lunmask/module-setup.shnu ȯ�� PK �5�Zfh]�8 8 # |� 95lunmask/sas_transport_scan_lun.shnu ȯ�� PK �5�Z�}~G2 2 " 95lunmask/fc_transport_scan_lun.shnu ȯ�� PK �5�Z�zb�� � � 91crypt-loop/crypt-loop-lib.shnu ȯ�� PK �5�Z����w w � 91crypt-loop/module-setup.shnu ȯ�� PK �5�Z¡U� � � 01fips/module-setup.shnu ȯ�� PK �5�Zj� � � q 01fips/fips-load-crypto.shnu �[��� PK �5�Z��� � 01fips/fips-boot.shnu ȯ�� PK �5�Z��xH� � � 01fips/fips-noboot.shnu ȯ�� PK �5�Z���< 01fips/fips.shnu ȯ�� PK �5�ZR�G l- 95terminfo/module-setup.shnu ȯ�� PK �5�Z�$[1 1 �/ 95fstab-sys/module-setup.shnu ȯ�� PK �5�Z�2�� B1 95fstab-sys/mount-sys.shnu ȯ�� PK �5�Z�{�� � �6 95rootfs-block/block-genrules.shnu ȯ�� PK �5�Z���� � �8 95rootfs-block/rootfallback.shnu ȯ�� PK �5�Zg�� � �= 95rootfs-block/module-setup.shnu ȯ�� PK �5�Z(D~F F &G 95rootfs-block/mount-root.shnu ȯ�� PK �5�Z�� ̜ � �X 95rootfs-block/parse-block.shnu ȯ�� PK �5�ZA�uR� � �\ 90mdraid/mdraid-needshutdown.shnu ȯ�� PK �5�Z� m� � % �] 90mdraid/65-md-incremental-imsm.rulesnu �[��� PK �5�Z)��� � �c 90mdraid/md-shutdown.shnu ȯ�� PK �5�Z�6��? ? �e 90mdraid/module-setup.shnu ȯ�� PK �5�Z��| � � &x 90mdraid/mdraid-waitclean.shnu ȯ�� PK �5�Z�>h$� � %{ 90mdraid/mdmon-pre-shutdown.shnu ȯ�� PK �5�Z �X�$
$
X| 90mdraid/parse-md.shnu ȯ�� PK �5�Z�<��� � �� 90mdraid/mdraid-cleanup.shnu ȯ�� PK �5�Z|�aE' ' �� 90mdraid/mdraid_start.shnu ȯ�� PK �5�Z����X X f� 90mdraid/md-noddf.shnu ȯ�� PK �5�ZU��Z Z � 90mdraid/md-noimsm.shnu ȯ�� PK �5�Z��@tJ J ' �� 90mdraid/59-persistent-storage-md.rulesnu �[��� PK �5�Z�]dׂ � B� 90mdraid/mdmon-pre-udev.shnu ȯ�� PK �5�Z%�O�� � / � 98dracut-systemd/dracut-pre-mount.service.8.ascnu �[��� PK �5�Zw��x� � ' � 98dracut-systemd/dracut-cmdline.servicenu �[��� PK �5�Z��=e� � / �� 98dracut-systemd/dracut-initqueue.service.8.ascnu �[��� PK �5�ZL� A� � 1 � 98dracut-systemd/dracut-pre-trigger.service.8.ascnu �[��� PK �5�Z��nK -� 98dracut-systemd/module-setup.shnu ȯ�� PK �5�ZC],� ) �� 98dracut-systemd/dracut-cmdline.service.8nu �[��� PK �5�Zo� e e ) � 98dracut-systemd/dracut-pre-pivot.servicenu �[��� PK �5�Z���5 5 ) �� 98dracut-systemd/dracut-initqueue.servicenu �[��� PK �5�Zƶ��6 6 ) M� 98dracut-systemd/dracut-pre-mount.servicenu �[��� PK �5�Z��\0� � $ ܺ 98dracut-systemd/dracut-pre-mount.shnu ȯ�� PK �5�Z���� � * &� 98dracut-systemd/dracut-shutdown.service.8nu �[��� PK �5�Z �r�[
[
" e� 98dracut-systemd/dracut-cmdline.shnu ȯ�� PK �5�Z�r��
+ � 98dracut-systemd/dracut-pre-mount.service.8nu �[��� PK �5�Z)!� + w� 98dracut-systemd/dracut-pre-pivot.service.8nu �[��� PK �5�Zl���5 5 2 �� 98dracut-systemd/dracut-shutdown-onfailure.servicenu �[��� PK �5�Z%�@� % n� 98dracut-systemd/dracut-mount.servicenu �[��� PK �5�Z�� - �� 98dracut-systemd/dracut-pre-trigger.service.8nu �[��� PK �5�Z�={ � � % G� 98dracut-systemd/dracut-tmpfiles.confnu �[��� PK �5�Z\�q�� � ( #� 98dracut-systemd/dracut-pre-udev.servicenu �[��� PK �5�Z�*R� � + \� 98dracut-systemd/dracut-pre-trigger.servicenu �[��� PK �5�ZW��z $ I� 98dracut-systemd/dracut-pre-pivot.shnu ȯ�� PK �5�Z1;��� � & � 98dracut-systemd/dracut-pre-trigger.shnu ȯ�� PK �5�Z�A�- E� 98dracut-systemd/dracut-mount.shnu ȯ�� PK �5�Z�1��� � " � 98dracut-systemd/emergency.servicenu �[��� PK �5�Z�g58 8 $ � 98dracut-systemd/rootfs-generator.shnu ȯ�� PK �5�ZI�j�� � / C 98dracut-systemd/dracut-pre-pivot.service.8.ascnu �[��� PK �5�Z��N^� � - O 98dracut-systemd/dracut-cmdline.service.8.ascnu �[��� PK �5�Z���X X . f 98dracut-systemd/dracut-shutdown.service.8.ascnu �[��� PK �5�Z�/�� � ' " 98dracut-systemd/dracut-mount.service.8nu �[��� PK �5�Zn�4c c $ n( 98dracut-systemd/dracut-initqueue.shnu ȯ�� PK �5�Z�N�P� � & %1 98dracut-systemd/dracut-cmdline-ask.shnu ȯ�� PK �5�Z� � * 3 98dracut-systemd/dracut-pre-udev.service.8nu �[��� PK �5�Z�cԩ � ) x9 98dracut-systemd/dracut-emergency.servicenu �[��� PK �5�ZM��� � # z< 98dracut-systemd/dracut-pre-udev.shnu ȯ�� PK �5�Z�97�O O + RB 98dracut-systemd/dracut-cmdline-ask.servicenu �[��� PK �5�Z=�f f $ �E 98dracut-systemd/dracut-emergency.shnu ȯ�� PK �5�Z��o�� � . �K 98dracut-systemd/dracut-pre-udev.service.8.ascnu �[��� PK �5�Z� 1�� � + �M 98dracut-systemd/dracut-mount.service.8.ascnu �[��� PK �5�Zı � + �O 98dracut-systemd/dracut-initqueue.service.8nu �[��� PK �5�Z��� � ( V 98dracut-systemd/dracut-shutdown.servicenu �[��� PK �5�Z�83�@ @ 0X 35network-legacy/module-setup.shnu ȯ�� PK �5�Z���� � �c 35network-legacy/parse-bond.shnu ȯ�� PK �5�Z�b��< �< �k 35network-legacy/ifup.shnu ȯ�� PK �5�ZO>��V V ! � 35network-legacy/parse-ip-opts.shnu ȯ�� PK �5�Z�e��
�� 35network-legacy/net-genrules.shnu ȯ�� PK �5�Z ��@/ / �� 35network-legacy/dhclient.confnu �[��� PK �5�Z�40�� � e� 35network-legacy/parse-vlan.shnu ȯ�� PK �5�Z�T � I� 35network-legacy/parse-ibft.shnu ȯ�� PK �5�Z����$ �$ # �� 35network-legacy/dhclient-script.shnu ȯ�� PK �5�Z?� )d d �� 35network-legacy/parse-bridge.shnu ȯ�� PK �5�Zn�d( ( W� 35network-legacy/parse-ifname.shnu ȯ�� PK �5�Z6U�@ @ � 35network-legacy/parse-team.shnu ȯ�� PK �5�Z����� � ! ] 35network-legacy/kill-dhclient.shnu ȯ�� PK �5�Zd�aE� � � 04watchdog/module-setup.shnu ȯ�� PK �5�Z6u��= = �
04watchdog/watchdog-stop.shnu ȯ�� PK �5�Z�� � h 04watchdog/watchdog.shnu ȯ�� PK �5�ZA�|y
� 95udev-rules/module-setup.shnu ȯ�� PK �5�Z $� � ( � 95udev-rules/61-persistent-storage.rulesnu �[��� PK �5�Z�|N N G 95udev-rules/load-modules.shnu ȯ�� PK �5�Z�*�A ( � 95udev-rules/59-persistent-storage.rulesnu �[��� PK �5�Z�� / L 80lvmthinpool-monitor/start-thinpool-monitor.shnu ȯ�� PK �5�Z�]�@ @ % �% 80lvmthinpool-monitor/module-setup.shnu ȯ�� PK �5�Z�)��F F 4 B( 80lvmthinpool-monitor/start-thinpool-monitor.servicenu �[��� PK �5�Z� �! ! �) 45ifcfg/module-setup.shnu ȯ�� PK �5�Z� &��" �" T+ 45ifcfg/write-ifcfg.shnu ȯ�� PK �5�Zl!0 <N 98ecryptfs/module-setup.shnu ȯ�� PK �5�Z#��Q' ' �O 98ecryptfs/READMEnu �[��� PK �5�Z�_���
�
Y 98ecryptfs/ecryptfs-mount.shnu ȯ�� PK �5�Z�i�� � d 99base/initqueue.shnu ȯ�� PK �5�Z�T� � �h 99base/loginit.shnu ȯ�� PK �5�Zt g� �j 99base/module-setup.shnu ȯ�� PK �5�Z��@�. . P{ 99base/init.shnu ȯ�� PK �5�Z�8�P �� 99base/dracut-lib.shnu ȯ�� PK �5�Z-6b�B B �- 99base/rdsosreport.shnu ȯ�� PK �5�Z�`J� � F3 99base/parse-root-opts.shnu ȯ�� PK �5�Z"'��z z �4 99earlykdump/early-kdump.shnu ȯ�� PK �5�Z��� � � J< 99earlykdump/module-setup.shnu ȯ�� PK �5�Z�Um�� � ^C 99uefi-lib/uefi-lib.shnu ȯ�� PK �5�Z;}� � � )V 99uefi-lib/module-setup.shnu ȯ�� PK �5�ZXd�ea a GW 95cifs/cifsroot.shnu ȯ�� PK �5�Z <M�� � �Y 95cifs/module-setup.shnu ȯ�� PK �5�Z�r��� � #_ 95cifs/cifs-lib.shnu ȯ�� PK �5�Z��LD� � .c 95cifs/parse-cifsroot.shnu ȯ�� PK �5�ZvM?� � h 99fs-lib/module-setup.shnu ȯ�� PK �5�Z���� � o 99fs-lib/fs-lib.shnu ȯ�� PK �5�Z��Z1� � E� 03modsign/module-setup.shnu ȯ�� PK �5�Z�`�~� � f� 03modsign/load-modsign-keys.shnu ȯ�� PK �5�ZujM / �� 99microcode_ctl-fw_dir_override/module-setup.shnu ȯ�� PK �5�Z�@�:� � " � 02systemd-networkd/module-setup.shnu ȯ�� PK �5�ZBq�1L L � 99squash/module-setup.shnu �[��� PK �5�Z �� 99squash/.shchkdirnu �[��� PK �5�Z*���~ ~ �� 99squash/init-squash.shnu ȯ�� PK �5�Z ��H �� 95ssh-client/module-setup.shnu ȯ�� PK �5�ZIP�0� � � 95fcoe-uefi/module-setup.shnu ȯ�� PK �5�Z%��~� � [� 95fcoe-uefi/parse-uefifcoe.shnu ȯ�� PK �5�Z�i��& & @� 98usrmount/module-setup.shnu ȯ�� PK �5�ZϮ� �� 98usrmount/mount-usr.shnu ȯ�� PK �5�Z�Uʤ� �
� 45url-lib/url-lib.shnu ȯ�� PK �5�Z
os�� �
� 45url-lib/module-setup.shnu ȯ�� PK �5�ZIp�j� � A� 80lvmmerge/module-setup.shnu ȯ�� PK �5�Z���H- - 3� 80lvmmerge/README.mdnu �[��� PK �5�Z���0 �� 80lvmmerge/lvmmerge.shnu ȯ�� PK �5�Z��nC/ / � 95hwdb/module-setup.shnu ȯ�� PK �5�Z{��� � n 00warpclock/module-setup.shnu �[��� PK �5�Z���a� � O 00warpclock/warpclock.shnu �[��� PK �5�Z���� � . 98pollcdrom/module-setup.shnu ȯ�� PK �5�ZaW�{ { @ 98pollcdrom/pollcdrom.shnu ȯ�� PK �5�ZMښX: : 05busybox/module-setup.shnu ȯ�� PK �5�Z[�H � 90crypt/crypt-run-generator.shnu ȯ�� PK �5�Zx2âl l � 90crypt/module-setup.shnu ȯ�� PK �5�Zz!�a a �+ 90crypt/parse-keydev.shnu ȯ�� PK �5�ZD���~ ~ 11 90crypt/probe-keydev.shnu ȯ�� PK �5�ZQD.1 �2 90crypt/cryptroot-ask.shnu ȯ�� PK �5�Zۻ��� � DF 90crypt/crypt-lib.shnu ȯ�� PK �5�Zl) � � kd 90crypt/crypt-cleanup.shnu ȯ�� PK �5�Z����� � mf 90crypt/parse-crypt.shnu ȯ�� PK �5�Z��,� � " �� 04watchdog-modules/module-setup.shnu ȯ�� PK �5�Zʬ�u
u
y� 40network/netroot.shnu ȯ�� PK �5�Z_S�U� � 2� 40network/module-setup.shnu ȯ�� PK �5�Z�T]d ]d � 40network/net-lib.shnu ȯ�� PK �5�ZT��_ _ �� 40network/ifname-genrules.shnu ȯ�� PK �5�Z�4L�0 0 g 40network/dhcp-root.shnu ȯ�� PK �5�Z���� � � 99kdumpbase/monitor_dd_progressnu �[��� PK �5�Z�j\㴋 �� 99kdumpbase/module-setup.shnu ȯ�� PK �5�Z-e�
� � #
� 99kdumpbase/kdump-emergency.servicenu �[��� PK �5�Z��n� � ' � 99kdumpbase/kdump-error-handler.servicenu �[��� PK �5�Z�r��� � " � 99kdumpbase/kdump-error-handler.shnu ȯ�� PK �5�Z�L�F� � " ɛ 99kdumpbase/kdump-emergency.targetnu �[��� PK �5�ZP�P� � ! ޝ 99kdumpbase/kdump-capture.servicenu �[��� PK �5�ZZ�~O� � � 99kdumpbase/kdump.shnu ȯ�� PK �5�Z����U U �� 90btrfs/btrfs_finished.shnu ȯ�� PK �5�ZJN3W� � E� 90btrfs/module-setup.shnu ȯ�� PK �5�Z9� b� 90btrfs/80-btrfs.rulesnu �[��� PK �5�Z��]� � �� 90btrfs/btrfs_device_ready.shnu ȯ�� PK �5�Z`�ю � �� 90btrfs/btrfs_timeout.shnu ȯ�� PK �5�Z[ �
�� 95nfs/parse-nfsroot.shnu ȯ�� PK �5�Z�C��, , �� 95nfs/module-setup.shnu ȯ�� PK �5�Z^%f f h� 95nfs/nfs-start-rpc.shnu ȯ�� PK �5�Z ɕ�$ $ � 95nfs/nfs-lib.shnu ȯ�� PK �5�ZZ�M M x 95nfs/nfsroot-cleanup.shnu ȯ�� PK �5�Z���� �
95nfs/nfsroot.shnu ȯ�� PK �5�Z& ��P P 30convertfs/module-setup.shnu ȯ�� PK �5�Z%�C� � �
30convertfs/convertfs.shnu ȯ�� PK �5�ZQ5�� � �" 30convertfs/do-convertfs.shnu ȯ�� PK �5�Z˺�� � �# 90lvm/module-setup.shnu ȯ�� PK �5�Z���
�
�8 90lvm/lvm_scan.shnu ȯ�� PK �5�Z�`�� �F 90lvm/64-lvm.rulesnu �[��� PK �5�Z��� � �I 90lvm/parse-lvm.shnu ȯ�� PK �5�Zr E�y y L 03rescue/module-setup.shnu ȯ�� PK �5�ZyB7�, , �M 06rngd/module-setup.shnu �[��� PK �5�Z�Iڛ: : LS 06rngd/sysconfignu �[��� PK �5�Z�'��L L �S 50drm/module-setup.shnu ȯ�� PK �5�Zq@�# # WY 05nss-softokn/module-setup.shnu ȯ�� PK �5�Z�=N � � �Z 95fcoe/lldpad.shnu ȯ�� PK �5�Z���i� � �\ 95fcoe/fcoe-up.shnu ȯ�� PK �5�Z�x�-� � g 95fcoe/parse-fcoe.shnu ȯ�� PK �5�Z%��\
\
=o 95fcoe/module-setup.shnu ȯ�� PK �5�Z�g�o o �| 95fcoe/stop-fcoe.shnu ȯ�� PK �5�Z,�v �} 95fcoe/cleanup-fcoe.shnu ȯ�� PK �5�ZC� � � 95fcoe/fcoe-edd.shnu ȯ�� PK �5�Zk*� � Ä 95fcoe/fcoe-genrules.shnu ȯ�� PK �5�Z�O#w�$ �$ �� 00systemd/module-setup.shnu ȯ�� PK �5�Z�J�� � & �� 90kernel-modules-extra/module-setup.shnu ȯ�� PK �b ��